Fix buggy #if removal in iphase.c that crept in with the initcalls fixup.

into home.transmeta.com:/home/torvalds/v2.5/linux

This is the initial port of InterMezzo for 2.5.  It now compiles,
mounts, and completes I/Os successfully, but we are aware that more
needs to be done and we will do it as quickly as possible.

The timer-handling split patch moved cpufreq stuff from time.c to
timers/timer_tsc.c but not the corresponding #include <linux/cpufreq.h>
causing the build to fail.

The fix is simple.

Convert the tty_drivers list to use list_heads instead of open coded
doubly-linked lists.

Correct compiler warnings for 64 bit platforms and minor formatting cleanup and remove debug function that was causing a conflict with a function of the same name in SCSI

into nuts.ninka.net:/home/davem/src/BK/sparc-2.5

uses fields that do not exist otherwise.

Due to some bugs in byteorder/generic.h linux would always use C handcoded
swab64 for 64bit ntohq or cpu_to_be64.  The C version is very inefficient
and expands to 30+ instructions of horrible code.

This hurts on filesystems that use on disk big endian data structures
with 64bit data types.

This patch adds an assembly optimized swab64 to fix it. Now bswab64 is
4 instructions when your CPU supports bswap and 9 when it doesn't.
Tests were done with gcc 3.2, may be different on older gcc.

This is good for ~600 bytes code size reduction in XFS (gcc 3.2):
Before:
 503199    3296    1682  508177   7c111 fs/xfs/xfs.o
After:
 502543    3296    1682  507521   7be81 fs/xfs/xfs.o

Also should be faster.

Also some minor cleanups in the file.

into home.transmeta.com:/home/torvalds/v2.5/linux

Most of these changes have been tested and used in the 2.4 tree, so this
is mostly a forward port of 2.4 bugfixes.

* C99 initializers
* Added specific initializations instead of assuming that the private
  part of the inode is already initialized.
* Remove unused code.
* Moved container file to the struct file private data, this is to
* correct the session semantics model when file updates are fetched from
* the server (old 'sessions' shouldn't see the new container yet).
* Fixed consistency (and occasional oopes) when mmap-ing Coda files.
* Fixing up inode numbers in readdir, old libc5 getcwd was broken.
* Nuked upcall_stats, all of this can easily be maintained in userspace,
  and the existing code suffers from overflows in the fixed point
  calculations.

- Fix some printk warnings in 3c59x.c (inl() now returns a long).

- ext3 warning fix from Stephen Hemminger: "__FUNCTION__ is a
  constant and gcc warns about passing it as a mutuable string."

- Fix a return-with-BKL-held in isofs_readdir()

- paride 64-bit sector_t fix (Bill Irwin)

into home.transmeta.com:/home/torvalds/v2.5/linux

This syncs up the cyclone-timer code w/ Greg's changes from this
morning.

In the current kernels, when a PCMCIA card is inserted into or
removed from a socket, the kernel oopses because yenta_bh() tries to
dereference a NULL pointer.

The attached patch initialises the argument to yenta_bh() so that this
doesn't happen.

into home.transmeta.com:/home/torvalds/v2.5/linux

into home.transmeta.com:/home/torvalds/v2.5/linux

Add _request and _parse methods for nfsd.fh and
nfsd.exports tables.

nfsd.fh maps a filehandle-fragment to a path for a client,
and nfsd.exports maps a path to export options for a client.

a message should be:
   nfsd 10.0.1.1 {Expirydate}  domainname

if domainname is empty, then this is a NEGATIVE entry: that
IP address will be deined access.

{Expirydate} is seconds since unix epoch.
e.g.  1036105199 for midnight, halloween.

get_word understands both \x and \012 quoting styles.

This is the first upcall to actually be coded.
A request will look like:
   nfsd 127.0.0.1

This code enhances 'cache_check' to try to initiate
an up-call if the cache entry is not up-to-date, and also
defines add_word and add_hex for formating up-call
requests.  See rpc-cache.txt for more detail.

[PATCH] kNFSd: Create files: /proc/net/rpc/$CACHENAME/channel for communicating cache updates with kernel

Each cache gets it's own 'channel' at
  /proc/net/rpc/$CACHENAME/channel

Reads from the file will return all pending requests, one at a time.
select will block when at end of file.
writes will pass full lines in to be processed.

cache.c gets code to allow a 'request' to be referred pending
an update of a cache item, and revisited when the item is
updates.

svcsock.c gets code to store the relevant part of a request on deferral, and
to re-queue it when the cache item that caused the deferral is
filled in.

Rather than possibly modifying a request (as
xdr_decode_string can) we use xdr_decode_string_inplace
to symlink contents.  This string may not be nul terminated
(though it often is) so in the 'unlikely' event that is isn't
nul terminated, we copy it into a kmalloced space first.

It might be nice if vfs_symlink took a length, but then every
filesystem would have to as well....

We are going to want rpc request to be immutable so that
we can take a copy and put it aside to be processed later.
Currently the tcp code writes the response into the same
buffer as the request, thus corrupting the request.
With this patch, the response goes after the request.  There should
always be enough room as large reqeusts (Write) has small
responses, and large responses (read) are for small requests.

buflen is changed for requests to record the length of the
request.  It already gets reset for each new request.

This introduces two caches, svc_export_cache (nfsd.exports) and
svc_expkey_cache (nfsd.fh).
nfsd.exports maps client+directory  ->  export options.
nfsd.fh maps client + filehandle-fragment -> directory.

A major part of this change is that export entries are now reference counted,
so we have to be careful  to keep those counts correct.

Instead of doing the lookup from ipaddr to domain inside
the nfs server, (and also when lockd calls into nfsd) it is
now done at the rpc authentication level which is a more
sensible place for it.

Note that both AUTH_UNIX and AUTH_NULL do the same lookup.

So that the rpc layer knows that nfsd and lockd both uses the
name space of domains (while other hypothetical services may
not) we introduce a 'class' for each service which svc_auth combines
with the IP address when doing a lookup.

This patch introduces two caches using the new infrastucture, and the
concept of a 'domain'.

A 'domain' refers to a collection of clients that all have the same
view of the nfs server, and all have the same access rights (modulo
different users on the clients).  For AUTH_UNIX (and AUTH_NULL), the
domain is determined from the IP address.  For other authentication
styles, the domain might be determined directly from the credentials.

Each auth flavour knows how to allocate and free it's domain-specific
infomation.

auth_domain_cache maps a name to a domain which is owned by
an auth flavour.

ip_map_cache is a cache specific to AUTH_UNIX which maps
IP address to domain.

With this patch, svcauth_unix.c is created to store all
auth_unix related code.

The IP address lookup code is removed from nfsd/exports.c

sunrpc module initilisation is moved out of stats.c into sunrpc_syms
which seemed to be the most central .c file.  It now registers these
two caches.

Now that the caches are being used, nfsd needs to call cache_clean
periodically.

This patch provides a "virtual class" for defining caches
that make user-space information available in the kernel
It is intended for RPC services or clients that need user-space
support for authentication.

As yet, support for userspace interaction isn't included as I want
that to be able to have separate review.

Define auth_ops that contains a method for authenticating a request and a
method for authorising a reply.  Call both methods as appropriate.

Also discard rq_verfed and cr_flavour, neither ever used.
And discard rq_auth as it isn't needed.