- 04 Mar, 2022 3 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v5.18: UAPI Changes: Cross-subsystem Changes: - Improve performance of some fbdev ops, in some cases up to 6x faster. Core Changes: - Some small DP fixes. - Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode to retrieve mode. - Add drm_object_property_get_default_value and use it for resetting zpos in plane state reset, removing the need for individual drivers to do it. - Same for color encoding and color range props. - Update panic handling todo doc. - Add todo that format conversion helpers should be sped up similarly to fbdev ops. Driver Changes: - Add panel orientation property to simpledrm for quirked panels. - Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x. - Add crc support to stm/ltdc. - Add MIPI DBI compatible SPI driver - Assorted small fixes to tiny panels and bridge drivers. - Add AST2600 support to aspeed. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
- R-Car LVDS support for M3-W+ (R8A77961) SoC - R-Car DU misc fixes and cleanups Signed-off-by:
-
https://gitlab.freedesktop.org/drm/tegraDave Airlie authored
drm/tegra: Changes for v5.18-rc1 This contains a couple more minor fixes that didn't seem urgent enough for v5.17. On top of that this improves YUV format support on older chips. Signed-off-by:
-
- 03 Mar, 2022 6 commits
-
-
Laurent Pinchart authored
On Gen3 hardware enabling a VSP plane doesn't change any register that requires DRES to take effect. Avoid a group restart in that case. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
-
Laurent Pinchart authored
The VSP1 sink selection through register DEFR8 is only available on Gen2 hardware. Skip it on Gen3. Signed-off-by:
-
Laurent Pinchart authored
The rcar-du driver goes to great lengths to preserve device tree backward compatibility for the LVDS encoders by patching old device trees at runtime. The last R-Car Gen2 platform was converted to the new bindings commit edb0c3af ("ARM: dts: r8a7793: Convert to new LVDS DT bindings"), in v4.17, and the last RZ/G1 platform converted in commit 6a6a7976 ("ARM: dts: r8a7743: Convert to new LVDS DT bindings"), in v5.0. Both are older than commit 58256143 ("clk: renesas: Remove R-Car Gen2 legacy DT clock support"), in v5.5, which removes support for legacy bindings for clocks. The LVDS compatibility code is thus not needed anymore. Drop it. Signed-off-by:
-
Nikita Yushchenko authored
The M3-W+ SoC has the same LVDS encoder as other R-Car Gen3 chips. Add support for M3-W+ (R8A77961) SoC to the LVDS encoder driver. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Nikita Yushchenko authored
Document the R-Car M3-W+ (R8A77961) SoC in the R-Car LVDS encoder bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Colin Ian King authored
Pointer mode is being assigned a value that is never read, it is being re-assigned later with a new value. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/gpu/drm/solomon/ssd130x.c:582:27: warning: Value stored to 'mode' during its initialization is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
- 02 Mar, 2022 10 commits
-
-
Tommy Haung authored
Add AST2600 chip support and setting. Signed-off-by:
Tommy Haung <tommy_huang@aspeedtech.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Tommy Haung authored
Add interrupt clear register define for further chip support. Signed-off-by:
-
Thomas Zimmermann authored
Add a TODO item for optimizing blitting and format-conversion helpers in DRM and fbdev. There's always demand for faster graphics output. v4: * fix typos (Sam) Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220223193804.18636-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Improve the performance of cfb_imageblit() by manually unrolling the inner blitting loop and moving some invariants out. The compiler failed to do this automatically. This change keeps cfb_imageblit() in sync with sys_imagebit(). A microbenchmark measures the average number of CPU cycles for cfb_imageblit() after a stabilizing period of a few minutes (i7-4790, FullHD, simpledrm, kernel with debugging). cfb_imageblit(), new: 15724 cycles cfb_imageblit(): old: 30566 cycles In the optimized case, cfb_imageblit() is now ~2x faster than before. v3: * fix commit description (Pekka) Signed-off-by:
-
Thomas Zimmermann authored
Fix coding style. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Improve the performance of sys_imageblit() by manually unrolling the inner blitting loop and moving some invariants out. The compiler failed to do this automatically. The resulting binary code was even slower than the cfb_imageblit() helper, which uses the same algorithm, but operates on I/O memory. A microbenchmark measures the average number of CPU cycles for sys_imageblit() after a stabilizing period of a few minutes (i7-4790, FullHD, simpledrm, kernel with debugging). The value for CFB is given as a reference. sys_imageblit(), new: 25934 cycles sys_imageblit(), old: 35944 cycles cfb_imageblit(): 30566 cycles In the optimized case, sys_imageblit() is now ~30% faster than before and ~20% faster than cfb_imageblit(). v2: * move switch out of inner loop (Gerd) * remove test for alignment of dst1 (Sam) Signed-off-by:
-
Thomas Zimmermann authored
Improve the performance of sys_fillrect() by using word-aligned 32/64-bit mov instructions. While the code tried to implement this, the compiler failed to create fast instructions. The resulting binary instructions were even slower than cfb_fillrect(), which uses the same algorithm, but operates on I/O memory. A microbenchmark measures the average number of CPU cycles for sys_fillrect() after a stabilizing period of a few minutes (i7-4790, FullHD, simpledrm, kernel with debugging). The value for CFB is given as a reference. sys_fillrect(), new: 26586 cycles sys_fillrect(), old: 166603 cycles cfb_fillrect(): 41012 cycles In the optimized case, sys_fillrect() is now ~6x faster than before and ~1.5x faster than the CFB implementation. Signed-off-by:
-
Tom Rix authored
For spdx change tab to space delimiter Use // for *.c Replacements commited to committed regsiters to registers initialze to initialize Signed-off-by:
Tom Rix <trix@redhat.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Liu Ying authored
To initialize register NWL_DSI_IRQ_MASK, it's enough to write it only once in function nwl_dsi_init_interrupts(). Signed-off-by:
Liu Ying <victor.liu@nxp.com> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220216085842.1973868-1-victor.liu@nxp.com
-
Hsin-Yi Wang authored
If the previous transfer didn't end with a command without DP_AUX_I2C_MOT, the next read trasnfer will miss the first byte. But if the command in previous transfer is requested with length 0, it's a no-op to anx7625 since it can't process this command. anx7625 requires the last command to be read command with length > 0. It's observed that if we clear the DP_AUX_I2C_MOT in read transfer, we can still get correct data. Clear the read commands with DP_AUX_I2C_MOT bit to fix this issue. Fixes: adca62ec ("drm/bridge: anx7625: Support reading edid through aux channel") Signed-off-by:
Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by:
Xin Ji <xji@analogixsemi.com> Signed-off-by:
-
- 01 Mar, 2022 9 commits
-
-
Melissa Wen authored
Remove redundant error message (since now it is very similar to what we do in drm_sched_init) and centralize all error handling in a unique place, as we follow the same steps in any case of failure. Signed-off-by:
Melissa Wen <mwen@igalia.com> Acked-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220228181647.3794298-1-mwen@igalia.com
-
José Expósito authored
The function "drm_of_find_panel_or_bridge" has been deprecated in favor of "devm_drm_of_get_bridge". Switch to the new function and reduce boilerplate. Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
Xin Ji authored
If "hdcp_workqueue" exist, must release "hdcp_workqueue", not "workqueue". Fixes: cd1637c7 ("drm/bridge: anx7625: add HDCP support") Signed-off-by:
-
Thierry Reding authored
Signed-off-by:Thierry Reding <treding@nvidia.com>
-
Thierry Reding authored
The NV12, NV21, NV16, NV61, NV24 and NV42 formats are supported by Tegra114 and later display hardware. Add the necessary programming to allow them to be used. Note that this does not work for Tegra186 and later yet because those generations have a different display architecture that doesn't support the same formats. Signed-off-by: -
Thierry Reding authored
Use the correct pitch when programming the DC_WIN_PLANAR_STORAGE_UV register's PITCH_U field to ensure the correct value is used in all cases. This isn't currently causing any problems because the pitch for both U and V planes is always the same. Signed-off-by: -
Christophe JAILLET authored
Add a missing 'host1x_channel_list_free()' call in the remove function, as already done in the error handling path of the probe function. Fixes: 8474b025 ("gpu: host1x: Refactor channel allocation code") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
Add the missing 'host1x_bo_cache_destroy()' call in the error handling path of the probe, as already done in the remove function. In order to simplify the error handling, move the 'host1x_bo_cache_init()' call after all the devm_ function. Fixes: 1f39b1df ("drm/tegra: Implement buffer object cache") Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.18-2022-02-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.18-2022-02-25: amdgpu: - Raven2 suspend/resume fix - SDMA 5.2.6 updates - VCN 3.1.2 updates - SMU 13.0.5 updates - DCN 3.1.5 updates - Virtual display fixes - SMU code cleanup - Harvest fixes - Expose benchmark tests via debugfs - Drop no longer relevant gart aperture tests - More RAS restructuring - W=1 fixes - PSR rework - DP/VGA adapter fixes - DP MST fixes - GPUVM eviction fix - GPU reset debugfs register dumping support - Misc display fixes - SR-IOV fix - Aldebaran mGPU fix - Add module parameter to disable XGMI for testing amdkfd: - IH ring overflow logging fixes - CRIU fixes - Misc fixes Signed-off-by:
-
- 28 Feb, 2022 11 commits
-
-
Hsin-Yi Wang authored
The size of read_buf is READ_BUFFER_SIZE (200), so we can't access it with read_buf + PAGE_SIZE (4096). Extend the READ_BUFFER_SIZE to 400 and set the end position to read_buf + READ_BUFFER_SIZE. Fixes: b5c84a9e ("drm/bridge: add it6505 driver") Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Rahul T R authored
Initialize bpc while creating panel_desc structure for RK101II01D-CT Below warning is triggered since bpc is not being initialized WARNING: CPU: 2 PID: 47 at drivers/gpu/drm/panel/panel-simple.c:614 panel_simple_probe+0x1b0/0x3c8 Signed-off-by:
Rahul T R <r-ravikumar@ti.com> Reviewed-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Nishanth Menon authored
Add MODULE_DEVICE_TABLE to the device tree table to create required aliases needed for module to be loaded with device tree based platform. Fixes: e1923395 ("drm/bridge: Add Cadence DSI driver") Signed-off-by:
Nishanth Menon <nm@ti.com> Reviewed-by:
-
Noralf Trønnes authored
Add a driver that will work with most MIPI DBI compatible SPI panels. This avoids adding a driver for every new MIPI DBI compatible controller that is to be used by Linux. The 'compatible' Device Tree property with a '.bin' suffix will be used to load a firmware file that contains the controller configuration. Example (driver will load sainsmart18.bin): display@0 { compatible = "sainsmart18", "panel-mipi-dbi-spi"; ... }; v5: - kconfig: s/DRM_KMS_CMA_HELPER/DRM_GEM_CMA_HELPER/ (Sam) - kconfig: Add select VIDEOMODE_HELPERS (Sam) - kconfig: Add wiki url in the description (Sam) - Split out and use of_get_drm_panel_display_mode()(Sam) - Only use the first compatible to look for a firmware file since the binding mandates 2 compatibles. - Make having a firmware file mandatory so we can print an error message if it's missing to improve the user experience. It's very unlikely that a controller doesn't need to be initialized and if it doesn't, it's possible to have a firmware file containing only a DCS NOP. v4: - Move driver to drm/tiny where the other drivers of its kind are located. The driver module will not be shared with a future DPI driver after all. v3: - Move properties to DT (Maxime) - The MIPI DPI spec has optional support for DPI where the controller is configured over DBI. Rework the command functions so they can be moved to drm_mipi_dbi and shared with a future panel-mipi-dpi-spi driver v2: - Drop model property and use compatible instead (Rob) - Add wiki entry in MAINTAINERS Acked-by:Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
Noralf Trønnes authored
devm_drm_dev_alloc() can't allocate structures that embed a structure which then again embeds drm_device. Workaround this by adding a driver_private pointer to struct mipi_dbi_dev which the driver can use for its additional state. v3: - Add documentation Acked-by:
-
Noralf Trønnes authored
Add a function to get a drm_display_mode from a panel-timing device tree subnode. Suggested-by:
-
Noralf Trønnes authored
Remove trailing whitespace from a comment. Acked-by:
-
Noralf Trønnes authored
Add binding for MIPI DBI compatible SPI panels. v6: - Fix indentation (Rob) v5: - Add sainsmart18 to compatible items (Rob) - Expand write-only description (Sam) v4: - There should only be two compatible (Maxime) - s/panel-dbi-spi/panel-mipi-dbi-spi/in compatible v3: - Move properties to Device Tree (Maxime) - Use contains for compatible (Maxime) - Add backlight property to example - Flesh out description v2: - Fix path for panel-common.yaml - Use unevaluatedProperties - Drop properties which are in the allOf section - Drop model property (Rob) Acked-by:
-
Daniel Vetter authored
Some things changed, and add two useful links. v2: Also include a link to the QR encoding work. Plus review from Javier. v3: Fix typo Guilherme spotted. Reviewed-by:
Guilherme G. Piccoli <gpiccoli@igalia.com> Acked-by:
Pekka Paalanen <pekka.paalanen@collabora.com> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220224132425.3463791-1-daniel.vetter@ffwll.ch
-
Dave Airlie authored
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top. Signed-off-by: -
Dave Airlie authored
Merge tag 'mediatek-drm-next-5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.18 1. Transfer display binding document to yaml format. 2. Add mt8195 display device binding. 3. Allow commands to be sent during video mode. 4. Add wait_for_event for crtc disable by cmdq. Signed-off-by:
-
- 27 Feb, 2022 1 commit
-
-
Linus Torvalds authored
-
