- 09 Mar, 2023 33 commits
-
-
Russell King (Oracle) authored
mtk_mac_config() checks that the interface mode is permitted for the capabilities, but we already do these checks in mtk_add_mac() when initialising phylink's supported_interfaces bitmap. Remove the unnecessary tests. Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Russell King (Oracle) authored
If TRGMII mode is not permitted when using DDR2 mode, we should handle that when setting up phylink's ->supported_interfaces so phylink knows that this is not supported by the hardware. Move this check to mtk_add_mac(). Signed-off-by:
-
Russell King (Oracle) authored
Get rid of the multiple tenary operators in mtk_gmac0_rgmii_adjust() replacing them with a single if(), thus making the code easier to read. Signed-off-by:
-
Jakub Kicinski authored
Bjorn Helgaas says: ==================== PCI/AER: Remove redundant Device Control Error Reporting Enable From: Bjorn Helgaas <bhelgaas@google.com> Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), which appeared in v6.0, the PCI core has enabled PCIe error reporting for all devices during enumeration. Remove driver code to do this and remove unnecessary includes of <linux/aer.h> from several other drivers. Intel folks, sorry that I missed removing the <linux/aer.h> includes in the first series. ==================== Link: https://lore.kernel.org/r/20230307181940.868828-1-helgaas@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
51b35a45 ("sfc: skeleton EF100 PF driver") added a call to pci_disable_pcie_error_reporting() in ef100_pci_remove(). Remove this call since there's no apparent reason to disable error reporting when it was not previously enabled. Note that since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core enables PCIe error reporting for all devices during enumeration, so the driver doesn't need to do it itself. Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Acked-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Also note that the driver only called these for NX_IS_REVISION_P3 devices, so since f26e58bf, error reporting has been enabled for devices other than NX_IS_REVISION_P3. Signed-off-by:
-
Bjorn Helgaas authored
<linux/aer.h> is unused, so remove it. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
Dimitris Michailidis <dmichail@fungible.com> Acked-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Acked-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. cd709aa9 ("bnx2: Add PCI Advanced Error Reporting support.") added pci_enable_pcie_error_reporting() for all devices, and c239f279 ("bnx2: Enable AER on PCIE devices only") restricted it to BNX2_CHIP_5709 devices to avoid an error message when it failed on non-PCIe devices. The PCI core only enables PCIe error reporting on PCIe devices, which I assume means BNX2_CHIP_5709. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Bjorn Helgaas authored
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration, so the driver doesn't need to do it itself. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this only controls ERR_* Messages from the device. An ERR_* Message may cause the Root Port to generate an interrupt, depending on the AER Root Error Command register managed by the AER service driver. Signed-off-by:
-
Wolfram Sang authored
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/all/20230307163041.3815-8-wsa+renesas@sang-engineering.com/Signed-off-by:
-
- 08 Mar, 2023 7 commits
-
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Andrii Nakryiko says: ==================== pull-request: bpf-next 2023-03-08 We've added 23 non-merge commits during the last 2 day(s) which contain a total of 28 files changed, 414 insertions(+), 104 deletions(-). The main changes are: 1) Add more precise memory usage reporting for all BPF map types, from Yafang Shao. 2) Add ARM32 USDT support to libbpf, from Puranjay Mohan. 3) Fix BTF_ID_LIST size causing problems in !CONFIG_DEBUG_INFO_BTF, from Nathan Chancellor. 4) IMA selftests fix, from Roberto Sassu. 5) libbpf fix in APK support code, from Daniel Müller. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (23 commits) selftests/bpf: Fix IMA test libbpf: USDT arm arg parsing support libbpf: Refactor parse_usdt_arg() to re-use code libbpf: Fix theoretical u32 underflow in find_cd() function bpf: enforce all maps having memory usage callback bpf: offload map memory usage bpf, net: xskmap memory usage bpf, net: sock_map memory usage bpf, net: bpf_local_storage memory usage bpf: local_storage memory usage bpf: bpf_struct_ops memory usage bpf: queue_stack_maps memory usage bpf: devmap memory usage bpf: cpumap memory usage bpf: bloom_filter memory usage bpf: ringbuf memory usage bpf: reuseport_array memory usage bpf: stackmap memory usage bpf: arraymap memory usage bpf: hashtab memory usage ... ==================== Link: https://lore.kernel.org/r/20230308193533.1671597-1-andrii@kernel.orgSigned-off-by:
-
Roberto Sassu authored
Commit 62622dab ("ima: return IMA digest value only when IMA_COLLECTED flag is set") caused bpf_ima_inode_hash() to refuse to give non-fresh digests. IMA test #3 assumed the old behavior, that bpf_ima_inode_hash() still returned also non-fresh digests. Correct the test by accepting both cases. If the samples returned are 1, assume that the commit above is applied and that the returned digest is fresh. If the samples returned are 2, assume that the commit above is not applied, and check both the non-fresh and fresh digest. Fixes: 62622dab ("ima: return IMA digest value only when IMA_COLLECTED flag is set") Reported-by:
David Vernet <void@manifault.com> Signed-off-by:
Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Reviewed-by:
Matt Bobrowski <mattbobrowski@google.com> Link: https://lore.kernel.org/bpf/20230308103713.1681200-1-roberto.sassu@huaweicloud.com
-
Eric Dumazet authored
Commit 0091bfc8 ("io_uring/af_unix: defer registered files gc to io_uring release") added one bit to struct sk_buff. This structure is critical for networking, and we try very hard to not add bloat on it, unless absolutely required. For instance, we can use a specific destructor as a wrapper around unix_destruct_scm(), to identify skbs that unix_gc() has to special case. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Cc: Jens Axboe <axboe@kernel.dk> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Steen Hegelund says: ==================== Add support for TC flower templates in Sparx5 This adds support for the TC template mechanism in the Sparx5 flower filter implementation. Templates are as such handled by the TC framework, but when a template is created (using a chain id) there are by definition no filters on this chain (an error will be returned if there are any). If the templates chain id is one that is represented by a VCAP lookup, then when the template is created, we know that it is safe to use the keys provided in the template to change the keyset configuration for the (port, lookup) combination, if this is needed to improve the match on the template. The original port keyset configuration is captured in the template state information which is kept per port, so that when the template is deleted the port keyset configuration can be restored to its previous setting. The template also provides the protocol parameter which is the basic information that is used to find out which port keyset configuration needs to be changed. The VCAPs and lookups are slightly different when it comes to which keys, keysets and protocol are supported and used for selection, so in some cases a bit of tweaking is needed to find a useful match. This is done by e.g. removing a key that prevents the best matching keyset from being selected. The debugfs output that is provided for a port allows inspection of the currently used keyset in each of the VCAPs lookups. So when a template has been created the debugfs output allows you to verify if the keyset configuration has been changed successfully. ==================== Signed-off-by: -
Steen Hegelund authored
This adds support for using the "template add" and "template destroy" functionality to change the port keyset configuration. If the VCAP lookup already contains rules, the port keyset is left unchanged, as a change would make these rules unusable. When the template is destroyed the port keyset configuration is restored. The filters using the template chain will automatically be deleted by the TC framework. Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by:
-
Steen Hegelund authored
With this its is now possible for clients (like TC) to change the port keyset configuration in the Sparx5 VCAPs. This is typically done per traffic class which is guided with the L3 protocol information. Before the change the current keyset configuration is collected in a list that is handed back to the client. Signed-off-by:
-
Steen Hegelund authored
This adds a list that is used to collect the templates that are active on a port. This allows the template creation to change the port configuration and the template destruction to change it back. Signed-off-by:
-
