Allow audit rules to compare the gid of the running task to the gid of the
inode in question.
Signed-off-by: Eric Paris <eparis@redhat.com>

Rather than code the same loop over and over implement a helper function which
uses some pointer magic to make it generic enough to be used numerous places
as we implement more audit interfield comparisons
Signed-off-by: Eric Paris <eparis@redhat.com>

We wish to be able to audit when a uid=500 task accesses a file which is
uid=0.  Or vice versa.  This patch introduces a new audit filter type
AUDIT_FIELD_COMPARE which takes as an 'enum' which indicates which fields
should be compared.  At this point we only define the task->uid vs
inode->uid, but other comparisons can be added.
Signed-off-by: Eric Paris <eparis@redhat.com>

This patch provides functionality to audit system call events on the
ARM platform. The implementation was based off the structure of the
MIPS platform and information in this
(http://lists.fedoraproject.org/pipermail/arm/2009-October/000382.html)
mailing list thread. The required audit_syscall_exit and
audit_syscall_entry checks were added to ptrace using the standard
registers for system call values (r0 through r3). A thread information
flag was added for auditing (TIF_SYSCALL_AUDIT) and a meta-flag was
added (_TIF_SYSCALL_WORK) to simplify modifications to the syscall
entry/exit. Now, if either the TRACE flag is set or the AUDIT flag is
set, the syscall_trace function will be executed. The prober changes
were made to Kconfig to allow CONFIG_AUDITSYSCALL to be enabled.

Due to platform availability limitations, this patch was only tested
on the Android platform running the modified "android-goldfish-2.6.29"
kernel. A test compile was performed using Code Sourcery's
cross-compilation toolset and the current linux-3.0 stable kernel. The
changes compile without error. I'm hoping, due to the simple modifications,
the patch is "obviously correct".
Signed-off-by: Nathaniel Husted <nhusted@gmail.com>
Signed-off-by: Eric Paris <eparis@redhat.com>

Just a code cleanup really.  We don't need to make a function call just for
it to return on error.  This also makes the VFS function even easier to follow
and removes a conditional on a hot path.
Signed-off-by: Eric Paris <eparis@redhat.com>

At the moment we allow tasks to set their loginuid if they have
CAP_AUDIT_CONTROL.  In reality we want tasks to set the loginuid when they
log in and it be impossible to ever reset.  We had to make it mutable even
after it was once set (with the CAP) because on update and admin might have
to restart sshd.  Now sshd would get his loginuid and the next user which
logged in using ssh would not be able to set his loginuid.

Systemd has changed how userspace works and allowed us to make the kernel
work the way it should.  With systemd users (even admins) are not supposed
to restart services directly.  The system will restart the service for
them.  Thus since systemd is going to loginuid==-1, sshd would get -1, and
sshd would be allowed to set a new loginuid without special permissions.

If an admin in this system were to manually start an sshd he is inserting
himself into the system chain of trust and thus, logically, it's his
loginuid that should be used!  Since we have old systems I make this a
Kconfig option.
Signed-off-by: Eric Paris <eparis@redhat.com>

The function always deals with current.  Don't expose an option
pretending one can use it for something.  You can't.
Signed-off-by: Eric Paris <eparis@redhat.com>

Much like the ability to filter audit on the uid of an inode collected, we
should be able to filter on the gid of the inode.
Signed-off-by: Eric Paris <eparis@redhat.com>

Allow syscall exit filter matching based on the uid of the owner of an
inode used in a syscall.  aka:

auditctl -a always,exit -S open -F obj_uid=0 -F perm=wa
Signed-off-by: Eric Paris <eparis@redhat.com>

Audit entry,always rules are not allowed and are automatically changed in
exit,always rules in userspace.  The kernel refuses to load such rules.

Thus a task in the middle of a syscall (and thus in audit_finish_fork())
can only be in one of two states: AUDIT_BUILD_CONTEXT or AUDIT_DISABLED.
Since the current task cannot be in AUDIT_RECORD_CONTEXT we aren't every
going to actually use the code in audit_finish_fork() since it will
return without doing anything.  Thus drop the code.
Signed-off-by: Eric Paris <eparis@redhat.com>

We deprecated entry,always rules a long time ago.  Reject those rules as
invalid.
Signed-off-by: Eric Paris <eparis@redhat.com>

make the conditional a static inline instead of doing it in generic code.
Signed-off-by: Eric Paris <eparis@redhat.com>

unused.  deleted.
Signed-off-by: Eric Paris <eparis@redhat.com>

A number of audit hooks make function calls before they determine that
auxilary records do not need to be collected.  Do those checks as static
inlines since the most common case is going to be that records are not
needed and we can skip the function call overhead.
Signed-off-by: Eric Paris <eparis@redhat.com>

The audit code makes heavy use of likely() and unlikely() macros, but they
don't always make sense.  Drop any that seem questionable and let the
computer do it's thing.
Signed-off-by: Eric Paris <eparis@redhat.com>

Audit contexts have 3 states.  Disabled, which doesn't collect anything,
build, which collects info but might not emit it, and record, which
collects and emits.  There is a 4th state, setup, which isn't used.  Get
rid of it.
Signed-off-by: Eric Paris <eparis@redhat.com>

Every arch calls:

if (unlikely(current->audit_context))
	audit_syscall_entry()

which requires knowledge about audit (the existance of audit_context) in
the arch code.  Just do it all in static inline in audit.h so that arch's
can remain blissfully ignorant.
Signed-off-by: Eric Paris <eparis@redhat.com>

In the ia32entry syscall exit audit fastpath we have assembly code which calls
__audit_syscall_exit directly.  This code was, however, zeroes the upper 32
bits of the return code.  It then proceeded to call code which expects longs
to be 64bits long.  In order to handle code which expects longs to be 64bit we
sign extend the return code if that code is an error.  Thus the
__audit_syscall_exit function can correctly handle using the values in
snprintf("%ld").  This fixes the regression introduced in 5cbf1565.

Old record:
type=SYSCALL msg=audit(1306197182.256:281): arch=40000003 syscall=192 success=no exit=4294967283
New record:
type=SYSCALL msg=audit(1306197182.256:281): arch=40000003 syscall=192 success=no exit=-13
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>

The audit system previously expected arches calling to audit_syscall_exit to
supply as arguments if the syscall was a success and what the return code was.
Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things
by converting from negative retcodes to an audit internal magic value stating
success or failure.  This helper was wrong and could indicate that a valid
pointer returned to userspace was a failed syscall.  The fix is to fix the
layering foolishness.  We now pass audit_syscall_exit a struct pt_reg and it
in turns calls back into arch code to collect the return value and to
determine if the syscall was a success or failure.  We also define a generic
is_syscall_success() macro which determines success/failure based on if the
value is < -MAX_ERRNO.  This works for arches like x86 which do not use a
separate mechanism to indicate syscall failure.

We make both the is_syscall_success() and regs_return_value() static inlines
instead of macros.  The reason is because the audit function must take a void*
for the regs.  (uml calls theirs struct uml_pt_regs instead of just struct
pt_regs so audit_syscall_exit can't take a struct pt_regs).  Since the audit
function takes a void* we need to use static inlines to cast it back to the
arch correct structure to dereference it.

The other major change is that on some arches, like ia64, MIPS and ppc, we
change regs_return_value() to give us the negative value on syscall failure.
THE only other user of this macro, kretprobe_example.c, won't notice and it
makes the value signed consistently for the audit functions across all archs.

In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old
audit code as the return value.  But the ptrace_64.h code defined the macro
regs_return_value() as regs[3].  I have no idea which one is correct, but this
patch now uses the regs_return_value() function, so it now uses regs[3].

For powerpc we previously used regs->result but now use the
regs_return_value() function which uses regs->gprs[3].  regs->gprs[3] is
always positive so the regs_return_value(), much like ia64 makes it negative
before calling the audit code when appropriate.
Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion]
Acked-by: Tony Luck <tony.luck@intel.com> [for ia64]
Acked-by: Richard Weinberger <richard@nod.at> [for uml]
Acked-by: David S. Miller <davem@davemloft.net> [for sparc]
Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]

The audit system likes to collect information about processes that end
abnormally (SIGSEGV) as this may me useful intrusion detection information.
This patch adds audit support to collect information when seccomp forces a
task to exit because of misbehavior in a similar way.
Signed-off-by: Eric Paris <eparis@redhat.com>

The audit system has the ability to filter on the major and minor number of
the device containing the inode being operated upon.  Lets say that
/dev/sda1 has major,minor 8,1 and that we mount /dev/sda1 on /boot.  Now lets
say we add a watch with a filter on 8,1.  If we proceed to open an inode
inside /boot, such as /vboot/vmlinuz, we will match the major,minor filter.

Lets instead assume that one were to use a tool like debugfs and were to
open /dev/sda1 directly and to modify it's contents.  We might hope that
this would also be logged, but it isn't.  The rules will check the
major,minor of the device containing /dev/sda1.  In other words the rule
would match on the major/minor of the tmpfs mounted at /dev.

I believe these rules should trigger on either device.  The man page is
devoid of useful information about the intended semantics.  It only seems
logical that if you want to know everything that happened on a major,minor
that would include things that happened to the device itself...
Signed-off-by: Eric Paris <eparis@redhat.com>

userspace audit messages look like so:

type=USER msg=audit(1271170549.415:24710): user pid=14722 uid=0 auid=500 ses=1 subj=unconfined_u:unconfined_r:auditctl_t:s0-s0:c0.c1023 msg=''

That third field just says 'user'.  That's useless and doesn't follow the
key=value pair we are trying to enforce.  We already know it came from the
user based on the record type.  Kill that word.  Die.
Signed-off-by: Eric Paris <eparis@redhat.com>

This patch does 2 things.  First it reduces the number of audit_names
allocated in every audit context from 20 to 5.  5 should be enough for all
'normal' syscalls (rename being the worst).  Some syscalls can still touch
more the 5 inodes such as mount.  When rpc filesystem is mounted it will
create inodes and those can exceed 5.  To handle that problem this patch will
dynamically allocate audit_names if it needs more than 5.  This should
decrease the typicall memory usage while still supporting all the possible
kernel operations.
Signed-off-by: Eric Paris <eparis@redhat.com>

Every other filter that matches part of the inodes list collected by audit
will match against any of the inodes on that list.  The filetype matching
however had a strange way of doing things.  It allowed userspace to
indicated if it should match on the first of the second name collected by
the kernel.  Name collection ordering seems like a kernel internal and
making userspace rules get that right just seems like a bad idea.  As it
turns out the userspace audit writers had no idea it was doing this and
thus never overloaded the value field.  The kernel always checked the first
name collected which for the tested rules was always correct.

This patch just makes the filetype matching like the major, minor, inode,
and LSM rules in that it will match against any of the names collected.  It
also changes the rule validation to reject the old unused rule types.

Noone knew it was there.  Noone used it.  Why keep around the extra code?
Signed-off-by: Eric Paris <eparis@redhat.com>

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel config: Fix the APB_TIMER selection
  x86/mrst: Add additional debug prints for pb_keys
  x86/intel config: Revamp configuration to allow for Moorestown and Medfield
  x86/intel/scu/ipc: Match the changes in the x86 configuration
  x86/apb: Fix configuration constraints
  x86: Fix INTEL_MID silly
  x86/Kconfig: Cyclone-timer depends on x86-summit
  x86: Reduce clock calibration time during slave cpu startup
  x86/config: Revamp configuration for MID devices
  x86/sfi: Kill the IRQ as id hack

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, reboot: Fix typo in nmi reboot path
  x86, NMI: Add to_cpumask() to silence compile warning
  x86, NMI: NMI selftest depends on the local apic
  x86: Add stack top margin for stack overflow checking
  x86, NMI: NMI-selftest should handle the UP case properly
  x86: Fix the 32-bit stackoverflow-debug build
  x86, NMI: Add knob to disable using NMI IPIs to stop cpus
  x86, NMI: Add NMI IPI selftest
  x86, reboot: Use NMI instead of REBOOT_VECTOR to stop cpus
  x86: Clean up the range of stack overflow checking
  x86: Panic on detection of stack overflow
  x86: Check stack overflow in detail

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, efi: Break up large initrd reads
  x86, efi: EFI boot stub support
  efi: Add EFI file I/O data types
  efi.h: Add boottime->locate_handle search types
  efi.h: Add graphics protocol guids
  efi.h: Add allocation types for boottime->allocate_pages()
  efi.h: Add efi_image_loaded_t
  efi.h: Add struct definition for boot time services
  x86: Don't use magic strings for EFI loader signature
  x86: Add missing bzImage fields to struct setup_header

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/numa: Add constraints check for nid parameters
  mm, x86: Remove debug_pagealloc_enabled
  x86/mm: Initialize high mem before free_all_bootmem()
  arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer
  arch/x86/kernel/e820.c: Eliminate bubble sort from sanitize_e820_map()
  x86: Fix mmap random address range
  x86, mm: Unify zone_sizes_init()
  x86, mm: Prepare zone_sizes_init() for unification
  x86, mm: Use max_low_pfn for ZONE_NORMAL on 64-bit
  x86, mm: Wrap ZONE_DMA32 with CONFIG_ZONE_DMA32
  x86, mm: Use max_pfn instead of highend_pfn
  x86, mm: Move zone init from paging_init() on 64-bit
  x86, mm: Use MAX_DMA_PFN for ZONE_DMA on 32-bit

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (23 commits)
  [CPUFREQ] EXYNOS: Removed useless headers and codes
  [CPUFREQ] EXYNOS: Make EXYNOS common cpufreq driver
  [CPUFREQ] powernow-k8: Update copyright, maintainer and documentation information
  [CPUFREQ] powernow-k8: Fix indexing issue
  [CPUFREQ] powernow-k8: Avoid Pstate MSR accesses on systems supporting CPB
  [CPUFREQ] update lpj only if frequency has changed
  [CPUFREQ] cpufreq:userspace: fix cpu_cur_freq updation
  [CPUFREQ] Remove wall variable from cpufreq_gov_dbs_init()
  [CPUFREQ] EXYNOS4210: cpufreq code is changed for stable working
  [CPUFREQ] EXYNOS4210: Update frequency table for cpu divider
  [CPUFREQ] EXYNOS4210: Remove code about bus on cpufreq
  [CPUFREQ] s3c64xx: Use pr_fmt() for consistent log messages
  cpufreq: OMAP: fixup for omap_device changes, include <linux/module.h>
  cpufreq: OMAP: fix freq_table leak
  cpufreq: OMAP: put clk if cpu_init failed
  cpufreq: OMAP: only supports OPP library
  cpufreq: OMAP: dont support !freq_table
  cpufreq: OMAP: deny initialization if no mpudev
  cpufreq: OMAP: move clk name decision to init
  cpufreq: OMAP: notify even with bad boot frequency
  ...

* git://git.infradead.org/battery-2.6: (68 commits)
  power_supply: Mark da9052 driver as broken
  power_supply: Drop usage of nowarn variant of sysfs_create_link()
  s3c_adc_battery: Average over more than one adc sample
  power_supply: Add DA9052 battery driver
  isp1704_charger: Fix missing check
  jz4740-battery: Fix signedness bug
  power_supply: Assume mains power by default
  sbs-battery: Fix devicetree match table
  ARM: rx51: Add bq27200 i2c board info
  sbs-battery: Change power supply name
  devicetree-bindings: Propagate bq20z75->sbs rename to dt bindings
  devicetree-bindings: Add vendor entry for Smart Battery Systems
  sbs-battery: Rename internals to new name
  bq20z75: Rename to sbs-battery
  wm97xx_battery: Use DEFINE_MUTEX() for work_lock
  max8997_charger: Remove duplicate module.h
  lp8727_charger: Some minor fixes for the header
  lp8727_charger: Add header file
  power_supply: Convert drivers/power/* to use module_platform_driver()
  power_supply: Add "unknown" in power supply type
  ...

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  slub: disallow changing cpu_partial from userspace for debug caches
  slub: add missed accounting
  slub: Extract get_freelist from __slab_alloc
  slub: Switch per cpu partial page support off for debugging
  slub: fix a possible memleak in __slab_alloc()
  slub: fix slub_max_order Documentation
  slub: add missed accounting
  slab: add taint flag outputting to debug paths.
  slub: add taint flag outputting to debug paths
  slab: introduce slab_max_order kernel parameter
  slab: rename slab_break_gfp_order to slab_max_order

Two bugfixes for md.

One is a recently introduced regression that affects an unusual
configuration with a guaranteed BUG_ON.  Has been tagged for -stable.
The other is minor missing functionality.

* tag 'md-3.3-fixes' of git://neil.brown.name/md:
  md/raid1: perform bad-block tests for WriteMostly devices too.
  md: notify the 'degraded' sysfs attribute on failure.

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: (80 commits)
  x86/PCI: Expand the x86_msi_ops to have a restore MSIs.
  PCI: Increase resource array mask bit size in pcim_iomap_regions()
  PCI: DEVICE_COUNT_RESOURCE should be equal to PCI_NUM_RESOURCES
  PCI: pci_ids: add device ids for STA2X11 device (aka ConneXT)
  PNP: work around Dell 1536/1546 BIOS MMCONFIG bug that breaks USB
  x86/PCI: amd: factor out MMCONFIG discovery
  PCI: Enable ATS at the device state restore
  PCI: msi: fix imbalanced refcount of msi irq sysfs objects
  PCI: kconfig: English typo in pci/pcie/Kconfig
  PCI/PM/Runtime: make PCI traces quieter
  PCI: remove pci_create_bus()
  xtensa/PCI: convert to pci_scan_root_bus() for correct root bus resources
  x86/PCI: convert to pci_create_root_bus() and pci_scan_root_bus()
  x86/PCI: use pci_scan_bus() instead of pci_scan_bus_parented()
  x86/PCI: read Broadcom CNB20LE host bridge info before PCI scan
  sparc32, leon/PCI: convert to pci_scan_root_bus() for correct root bus resources
  sparc/PCI: convert to pci_create_root_bus()
  sh/PCI: convert to pci_scan_root_bus() for correct root bus resources
  powerpc/PCI: convert to pci_create_root_bus()
  powerpc/PCI: split PHB part out of pcibios_map_io_space()
  ...

Fix up conflicts in drivers/pci/msi.c and include/linux/pci_regs.h due
to the same patches being applied in other branches.

frv, h8300, m68k, microblaze, openrisc, score, um and xtensa currently
do not register a CPU device.  Add the config option GENERIC_CPU_DEVICES
which causes a generic CPU device to be registered for each present CPU,
and make all these architectures select it.

Richard Weinberger <richard@nod.at> covered UML and suggested using
per_cpu.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpu_dev_init() is only called from driver_init(), which does not check
its return value.  Therefore make cpu_dev_init() return void.

We must register the CPU subsystem, so panic if this fails.

If sched_create_sysfs_power_savings_entries() fails, the damage is
contained, so ignore this (as before).
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (54 commits)
  crypto: gf128mul - remove leftover "(EXPERIMENTAL)" in Kconfig
  crypto: serpent-sse2 - remove unneeded LRW/XTS #ifdefs
  crypto: serpent-sse2 - select LRW and XTS
  crypto: twofish-x86_64-3way - remove unneeded LRW/XTS #ifdefs
  crypto: twofish-x86_64-3way - select LRW and XTS
  crypto: xts - remove dependency on EXPERIMENTAL
  crypto: lrw - remove dependency on EXPERIMENTAL
  crypto: picoxcell - fix boolean and / or confusion
  crypto: caam - remove DECO access initialization code
  crypto: caam - fix polarity of "propagate error" logic
  crypto: caam - more desc.h cleanups
  crypto: caam - desc.h - convert spaces to tabs
  crypto: talitos - convert talitos_error to struct device
  crypto: talitos - remove NO_IRQ references
  crypto: talitos - fix bad kfree
  crypto: convert drivers/crypto/* to use module_platform_driver()
  char: hw_random: convert drivers/char/hw_random/* to use module_platform_driver()
  crypto: serpent-sse2 - should select CRYPTO_CRYPTD
  crypto: serpent - rename serpent.c to serpent_generic.c
  crypto: serpent - cleanup checkpatch errors and warnings
  ...

* 'for-linus' of git://selinuxproject.org/~jmorris/linux-security: (32 commits)
  ima: fix invalid memory reference
  ima: free duplicate measurement memory
  security: update security_file_mmap() docs
  selinux: Casting (void *) value returned by kmalloc is useless
  apparmor: fix module parameter handling
  Security: tomoyo: add .gitignore file
  tomoyo: add missing rcu_dereference()
  apparmor: add missing rcu_dereference()
  evm: prevent racing during tfm allocation
  evm: key must be set once during initialization
  mpi/mpi-mpow: NULL dereference on allocation failure
  digsig: build dependency fix
  KEYS: Give key types their own lockdep class for key->sem
  TPM: fix transmit_cmd error logic
  TPM: NSC and TIS drivers X86 dependency fix
  TPM: Export wait_for_stat for other vendor specific drivers
  TPM: Use vendor specific function for status probe
  tpm_tis: add delay after aborting command
  tpm_tis: Check return code from getting timeouts/durations
  tpm: Introduce function to poll for result of self test
  ...

Fix up trivial conflict in lib/Makefile due to addition of CONFIG_MPI
and SIGSIG next to CONFIG_DQL addition.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  autofs4: deal with autofs4_write/autofs4_write races
  autofs4: catatonic_mode vs. notify_daemon race
  autofs4: autofs4_wait() vs. autofs4_catatonic_mode() race
  hfsplus: creation of hidden dir on mount can fail
  block_dev: Suppress bdev_cache_init() kmemleak warninig
  fix shrink_dcache_parent() livelock
  coda: switch coda_cnode_make() to sane API as well, clean coda_lookup()
  coda: deal correctly with allocation failure from coda_cnode_makectl()
  securityfs: fix object creation races

Just serialize the actual writing of packets into pipe on
a new mutex, independent from everything else in the locking
hierarchy.  As soon as something has started feeding a piece
of packet into the pipe to daemon, we *want* everything else
about to try the same to wait until we are done.
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>