There is no point in duplicating the file name in the top of the file
comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

fs/block_dev.c is a pretty integral part of the block layer, so make
sure it is mentioned in MAINTAINERS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

With force threaded interrupts enabled, raising softirq from an SMP
function call will always result in waking the ksoftirqd thread. This is
not optimal given that the thread runs at SCHED_OTHER priority.

Completing the request in hard IRQ-context on PREEMPT_RT (which enforces
the force threaded mode) is bad because the completion handler may
acquire sleeping locks which violate the locking context.

Disable request completing on a remote CPU in force threaded mode.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In dasd_alias_disconnect_device_from_lcu the device is removed from any
list on the LCU. Afterwards the LCU is removed from the lcu list if it
does not contain devices any longer.

The lcu->lock protects the lcu from parallel updates. But to cancel all
workers and wait for completion the lcu->lock has to be unlocked.

If two devices are removed in parallel and both are removed from the LCU
the first device that takes the lcu->lock again will delete the LCU because
it is already empty but the second device also tries to free the LCU which
leads to a list corruption of the lcu list.

Fix by removing the device right before the lcu is checked without
unlocking the lcu->lock in between.

Fixes: 8e09f215 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dasd_alias_add_device() moves devices to the active_devices list in case
of a scheduled LCU update regardless if they have previously been in a
pavgroup or not.

Example: device A and B are in the same pavgroup.

Device A has already been in a pavgroup and the private->pavgroup pointer
is set and points to a valid pavgroup. While going through dasd_add_device
it is moved from the pavgroup to the active_devices list.

In parallel device B might be removed from the same pavgroup in
remove_device_from_lcu() which in turn checks if the group is empty
and deletes it accordingly because device A has already been removed from
there.

When now device A enters remove_device_from_lcu() it is tried to remove it
from the pavgroup again because the pavgroup pointer is still set and again
the empty group will be cleaned up which leads to a list corruption.

Fix by setting private->pavgroup to NULL in dasd_add_device.

If the device has been the last device on the pavgroup an empty pavgroup
remains but this will be cleaned up by the scheduled lcu_update which
iterates over all existing pavgroups.

Fixes: 8e09f215 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Prevent _lcu_update from adding a device to a pavgroup if the LCU still
requires an update. The data is not reliable any longer and in parallel
devices might have been moved on the lists already.
This might lead to list corruptions or invalid PAV grouping.
Only add devices to a pavgroup if the LCU is up to date. Additional steps
are taken by the scheduled lcu update.

Fixes: 8e09f215 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For an LCU update a read unit address configuration IO is required.
This is started using sleep_on(), which has early exit paths in case the
device is not usable for IO. For example when it is in offline processing.

In those cases the LCU update should fail and not be retried.
Therefore lcu_update_work checks if EOPNOTSUPP is returned or not.

Commit 41995342 ("s390/dasd: fix endless loop after read unit address configuration")
accidentally removed the EOPNOTSUPP return code from
read_unit_address_configuration(), which in turn might lead to an endless
loop of the LCU update in offline processing.

Fix by returning EOPNOTSUPP again if the device is not able to perform the
request.

Fixes: 41995342 ("s390/dasd: fix endless loop after read unit address configuration")
Cc: stable@vger.kernel.org #5.3
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It will be helpful to trace the iocg's whole state, including active and
idle state. And we can easily expand the original iocost_iocg_activate
trace event to support a state trace class, including active and idle
state tracing.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The creation path of the NBD device respects max_part and only scans for
partitions if max_part is not 0. However, some other code paths ignore
max_part, and unconditionally scan for partitions. Add a check for
max_part on each partition scan.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Previously the rnbd client requested the rtrs to allocate rnbd_iu
just after the rtrs_iu. So the rnbd client passes the size of
rnbd_iu for rtrs_clt_open() and rtrs creates an array of
rnbd_iu and rtrs_iu.

For IO handling, rnbd_iu exists after the request because we pass
the size of rnbd_iu when setting the tag-set. Therefore we do not
use the rnbd_iu allocated by rtrs for IO handling.
We only use the rnbd_iu allocated by rtrs when doing session
initialization. Almost all rnbd_iu allocated by rtrs are wasted.

By this patch the rnbd client does not request rnbd_iu allocation
to rtrs but allocate it for itself when doing session initialization.

Also remove unused rtrs_permit_to_pdu from rtrs.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The BMAX_SEGMENT static array for scatterlist is embedded in
rnbd_iu structure to avoid memory allocation in hot IO path.
In many cases, we do need only several sg entries because many IOs
have only several segments.

This patch change rnbd_iu to check the number of segments in the request
and allocate sglist dynamically.

For io path, use sg_alloc_table_chained to allocate sg list faster.

First it makes two sg entries after pdu of request.
The sg_alloc_table_chained uses the pre-allocated sg entries
if the number of segments of the request is less than two.
So it reduces the number of memory allocation.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The rnbd-client always sets the write-back cache and fua attributes
of the rnbd device queue regardless of the target device on the server.
That generates IO hang issue when the target device does not
support both of write-back cacne and fua.

This patch adds more fields for the cache policy and fua into the
device opening message. The rnbd-server sends the information
if the target device supports the write-back cache and fua
and rnbd-client recevives it and set the device queue accordingly.
Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com>
[jwang: some minor change, rename a few varables, remove unrelated comments.]
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Since the removal of the session sysfs can also be called from the
function destroy_sess, there is a need to protect the call from the
function rnbd_srv_sess_dev_force_close

Fixes: 78699805 ("block/rnbd-srv: close a mapped device from server side.")
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

In error case, we do not free the memory for blk_symlink_name.

Do it by free the memory in error case, and set to NULL
afterwards.

Also fix the condition in rnbd_clt_remove_dev_symlink.

Fixes: 64e8a6ec ("block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name")
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Reviewed-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The kernel test robot triggerred the following warning,

>> drivers/block/rnbd/rnbd-clt.c:1397:42: warning: size argument in
'strlcpy' call appears to be size of the source; expected the size of the
destination [-Wstrlcpy-strlcat-size]
	strlcpy(dev->pathname, pathname, strlen(pathname) + 1);
					      ~~~~~~~^~~~~~~~~~~~~

To get rid of the above warning, use a kstrdup as Bart suggested.

Fixes: 64e8a6ec ("block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@cloud.ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It's guaranteed that no request is in flight when a hctx is going
offline. This warning is only triggered when the wq's CPU is hot
plugged and the blk-mq is not synced up yet.

As this state is temporary and the request is still processed
correctly, better remove the warning as this is the fast path.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull rdma updates from Jason Gunthorpe:
 "A smaller set of patches, nothing stands out as being particularly
  major this cycle. The biggest item would be the new HIP09 HW support
  from HNS, otherwise it was pretty quiet for new work here:

   - Driver bug fixes and updates: bnxt_re, cxgb4, rxe, hns, i40iw,
     cxgb4, mlx4 and mlx5

   - Bug fixes and polishing for the new rts ULP

   - Cleanup of uverbs checking for allowed driver operations

   - Use sysfs_emit all over the place

   - Lots of bug fixes and clarity improvements for hns

   - hip09 support for hns

   - NDR and 50/100Gb signaling rates

   - Remove dma_virt_ops and go back to using the IB DMA wrappers

   - mlx5 optimizations for contiguous DMA regions"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (147 commits)
  RDMA/cma: Don't overwrite sgid_attr after device is released
  RDMA/mlx5: Fix MR cache memory leak
  RDMA/rxe: Use acquire/release for memory ordering
  RDMA/hns: Simplify AEQE process for different types of queue
  RDMA/hns: Fix inaccurate prints
  RDMA/hns: Fix incorrect symbol types
  RDMA/hns: Clear redundant variable initialization
  RDMA/hns: Fix coding style issues
  RDMA/hns: Remove unnecessary access right set during INIT2INIT
  RDMA/hns: WARN_ON if get a reserved sl from users
  RDMA/hns: Avoid filling sl in high 3 bits of vlan_id
  RDMA/hns: Do shift on traffic class when using RoCEv2
  RDMA/hns: Normalization the judgment of some features
  RDMA/hns: Limit the length of data copied between kernel and userspace
  RDMA/mlx4: Remove bogus dev_base_lock usage
  RDMA/uverbs: Fix incorrect variable type
  RDMA/core: Do not indicate device ready when device enablement fails
  RDMA/core: Clean up cq pool mechanism
  RDMA/core: Update kernel documentation for ib_create_named_qp()
  MAINTAINERS: SOFT-ROCE: Change Zhu Yanjun's email address
  ...

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, qla2xxx, smartpqi,
  target, zfcp, fnic, mpt3sas, ibmvfc) plus a load of cleanups, a major
  power management rework and a load of assorted minor updates.

  There are a few core updates (formatting fixes being the big one) but
  nothing major this cycle"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: mpt3sas: Update driver version to 36.100.00.00
  scsi: mpt3sas: Handle trigger page after firmware update
  scsi: mpt3sas: Add persistent MPI trigger page
  scsi: mpt3sas: Add persistent SCSI sense trigger page
  scsi: mpt3sas: Add persistent Event trigger page
  scsi: mpt3sas: Add persistent Master trigger page
  scsi: mpt3sas: Add persistent trigger pages support
  scsi: mpt3sas: Sync time periodically between driver and firmware
  scsi: qla2xxx: Update version to 10.02.00.104-k
  scsi: qla2xxx: Fix device loss on 4G and older HBAs
  scsi: qla2xxx: If fcport is undergoing deletion complete I/O with retry
  scsi: qla2xxx: Fix the call trace for flush workqueue
  scsi: qla2xxx: Fix flash update in 28XX adapters on big endian machines
  scsi: qla2xxx: Handle aborts correctly for port undergoing deletion
  scsi: qla2xxx: Fix N2N and NVMe connect retry failure
  scsi: qla2xxx: Fix FW initialization error on big endian machines
  scsi: qla2xxx: Fix crash during driver load on big endian machines
  scsi: qla2xxx: Fix compilation issue in PPC systems
  scsi: qla2xxx: Don't check for fw_started while posting NVMe command
  scsi: qla2xxx: Tear down session if FW say it is down
  ...

Pull block driver updates from Jens Axboe:
 "Nothing major in here:

   - NVMe pull request from Christoph:
        - nvmet passthrough improvements (Chaitanya Kulkarni)
        - fcloop error injection support (James Smart)
        - read-only support for zoned namespaces without Zone Append
          (Javier González)
        - improve some error message (Minwoo Im)
        - reject I/O to offline fabrics namespaces (Victor Gladkov)
        - PCI queue allocation cleanups (Niklas Schnelle)
        - remove an unused allocation in nvmet (Amit Engel)
        - a Kconfig spelling fix (Colin Ian King)
        - nvme_req_qid simplication (Baolin Wang)

   - MD pull request from Song:
        - Fix race condition in md_ioctl() (Dae R. Jeong)
        - Initialize read_slot properly for raid10 (Kevin Vigor)
        - Code cleanup (Pankaj Gupta)
        - md-cluster resync/reshape fix (Zhao Heming)

   - Move null_blk into its own directory (Damien Le Moal)

   - null_blk zone and discard improvements (Damien Le Moal)

   - bcache race fix (Dongsheng Yang)

   - Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
     Lutz Pogrell, Md Haris Iqbal)

   - lightnvm NULL pointer deref fix (tangzhenhao)

   - sr in_interrupt() removal (Sebastian Andrzej Siewior)

   - FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
     Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
     as it made it easier for them to funnel the feature through the
     block driver tree.

   - Follow up fixes (Colin Ian King)"

* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
  block: drop dead assignments in loop_init()
  sr: Remove in_interrupt() usage in sr_init_command().
  sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
  cdrom: Reset sector_size back it is not 2048.
  drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
  null_blk: Move driver into its own directory
  null_blk: Allow controlling max_hw_sectors limit
  null_blk: discard zones on reset
  null_blk: cleanup discard handling
  null_blk: Improve implicit zone close
  null_blk: improve zone locking
  block: Align max_hw_sectors to logical blocksize
  null_blk: Fail zone append to conventional zones
  null_blk: Fix zone size initialization
  bcache: fix race between setting bdev state to none and new write request direct to backing
  block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
  block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
  block/rnbd: call kobject_put in the failure path
  Documentation/ABI/rnbd-srv: add document for force_close
  block/rnbd-srv: close a mapped device from server side.
  ...

Pull block updates from Jens Axboe:
 "Another series of killing more code than what is being added, again
  thanks to Christoph's relentless cleanups and tech debt tackling.

  This contains:

   - blk-iocost improvements (Baolin Wang)

   - part0 iostat fix (Jeffle Xu)

   - Disable iopoll for split bios (Jeffle Xu)

   - block tracepoint cleanups (Christoph Hellwig)

   - Merging of struct block_device and hd_struct (Christoph Hellwig)

   - Rework/cleanup of how block device sizes are updated (Christoph
     Hellwig)

   - Simplification of gendisk lookup and removal of block device
     aliasing (Christoph Hellwig)

   - Block device ioctl cleanups (Christoph Hellwig)

   - Removal of bdget()/blkdev_get() as exported API (Christoph Hellwig)

   - Disk change rework, avoid ->revalidate_disk() (Christoph Hellwig)

   - sbitmap improvements (Pavel Begunkov)

   - Hybrid polling fix (Pavel Begunkov)

   - bvec iteration improvements (Pavel Begunkov)

   - Zone revalidation fixes (Damien Le Moal)

   - blk-throttle limit fix (Yu Kuai)

   - Various little fixes"

* tag 'for-5.11/block-2020-12-14' of git://git.kernel.dk/linux-block: (126 commits)
  blk-mq: fix msec comment from micro to milli seconds
  blk-mq: update arg in comment of blk_mq_map_queue
  blk-mq: add helper allocating tagset->tags
  Revert "block: Fix a lockdep complaint triggered by request queue flushing"
  nvme-loop: use blk_mq_hctx_set_fq_lock_class to set loop's lock class
  blk-mq: add new API of blk_mq_hctx_set_fq_lock_class
  block: disable iopoll for split bio
  block: Improve blk_revalidate_disk_zones() checks
  sbitmap: simplify wrap check
  sbitmap: replace CAS with atomic and
  sbitmap: remove swap_lock
  sbitmap: optimise sbitmap_deferred_clear()
  blk-mq: skip hybrid polling if iopoll doesn't spin
  blk-iocost: Factor out the base vrate change into a separate function
  blk-iocost: Factor out the active iocgs' state check into a separate function
  blk-iocost: Move the usage ratio calculation to the correct place
  blk-iocost: Remove unnecessary advance declaration
  blk-iocost: Fix some typos in comments
  blktrace: fix up a kerneldoc comment
  block: remove the request_queue to argument request based tracepoints
  ...

Pull io_uring updates from Jens Axboe:
 "Fairly light set of changes this time around, and mostly some bits
  that were pushed out to 5.11 instead of 5.10, fixes/cleanups, and a
  few features. In particular:

   - Cleanups around iovec import (David Laight, Pavel)

   - Add timeout support for io_uring_enter(2), which enables us to
     clean up liburing and avoid a timeout sqe submission in the
     completion path.

     The big win here is that it allows setups that split SQ and CQ
     handling into separate threads to avoid locking, as the CQ side
     will no longer submit when timeouts are needed when waiting for
     events (Hao Xu)

   - Add support for socket shutdown, and renameat/unlinkat.

   - SQPOLL cleanups and improvements (Xiaoguang Wang)

   - Allow SQPOLL setups for CAP_SYS_NICE, and enable regular
     (non-fixed) files to be used.

   - Cancelation improvements (Pavel)

   - Fixed file reference improvements (Pavel)

   - IOPOLL related race fixes (Pavel)

   - Lots of other little fixes and cleanups (mostly Pavel)"

* tag 'for-5.11/io_uring-2020-12-14' of git://git.kernel.dk/linux-block: (43 commits)
  io_uring: fix io_cqring_events()'s noflush
  io_uring: fix racy IOPOLL flush overflow
  io_uring: fix racy IOPOLL completions
  io_uring: always let io_iopoll_complete() complete polled io
  io_uring: add timeout update
  io_uring: restructure io_timeout_cancel()
  io_uring: fix files cancellation
  io_uring: use bottom half safe lock for fixed file data
  io_uring: fix miscounting ios_left
  io_uring: change submit file state invariant
  io_uring: check kthread stopped flag when sq thread is unparked
  io_uring: share fixed_file_refs b/w multiple rsrcs
  io_uring: replace inflight_wait with tctx->wait
  io_uring: don't take fs for recvmsg/sendmsg
  io_uring: only wake up sq thread while current task is in io worker context
  io_uring: don't acquire uring_lock twice
  io_uring: initialize 'timeout' properly in io_sq_thread()
  io_uring: refactor io_sq_thread() handling
  io_uring: always batch cancel in *cancel_files()
  io_uring: pass files into kill timeouts/poll
  ...

Pull TIF_NOTIFY_SIGNAL updates from Jens Axboe:
 "This sits on top of of the core entry/exit and x86 entry branch from
  the tip tree, which contains the generic and x86 parts of this work.

  Here we convert the rest of the archs to support TIF_NOTIFY_SIGNAL.

  With that done, we can get rid of JOBCTL_TASK_WORK from task_work and
  signal.c, and also remove a deadlock work-around in io_uring around
  knowing that signal based task_work waking is invoked with the sighand
  wait queue head lock.

  The motivation for this work is to decouple signal notify based
  task_work, of which io_uring is a heavy user of, from sighand. The
  sighand lock becomes a huge contention point, particularly for
  threaded workloads where it's shared between threads. Even outside of
  threaded applications it's slower than it needs to be.

  Roman Gershman <romger@amazon.com> reported that his networked
  workload dropped from 1.6M QPS at 80% CPU to 1.0M QPS at 100% CPU
  after io_uring was changed to use TIF_NOTIFY_SIGNAL. The time was all
  spent hammering on the sighand lock, showing 57% of the CPU time there
  [1].

  There are further cleanups possible on top of this. One example is
  TIF_PATCH_PENDING, where a patch already exists to use
  TIF_NOTIFY_SIGNAL instead. Hopefully this will also lead to more
  consolidation, but the work stands on its own as well"

[1] https://github.com/axboe/liburing/issues/215

* tag 'tif-task_work.arch-2020-12-14' of git://git.kernel.dk/linux-block: (28 commits)
  io_uring: remove 'twa_signal_ok' deadlock work-around
  kernel: remove checking for TIF_NOTIFY_SIGNAL
  signal: kill JOBCTL_TASK_WORK
  io_uring: JOBCTL_TASK_WORK is no longer used by task_work
  task_work: remove legacy TWA_SIGNAL path
  sparc: add support for TIF_NOTIFY_SIGNAL
  riscv: add support for TIF_NOTIFY_SIGNAL
  nds32: add support for TIF_NOTIFY_SIGNAL
  ia64: add support for TIF_NOTIFY_SIGNAL
  h8300: add support for TIF_NOTIFY_SIGNAL
  c6x: add support for TIF_NOTIFY_SIGNAL
  alpha: add support for TIF_NOTIFY_SIGNAL
  xtensa: add support for TIF_NOTIFY_SIGNAL
  arm: add support for TIF_NOTIFY_SIGNAL
  microblaze: add support for TIF_NOTIFY_SIGNAL
  hexagon: add support for TIF_NOTIFY_SIGNAL
  csky: add support for TIF_NOTIFY_SIGNAL
  openrisc: add support for TIF_NOTIFY_SIGNAL
  sh: add support for TIF_NOTIFY_SIGNAL
  um: add support for TIF_NOTIFY_SIGNAL
  ...

Pull parisc updates from Helge Deller:
 "A change to increase the default maximum stack size on parisc to 100MB
  and the ability to further increase the stack hard limit size at
  runtime with ulimit for newly started processes.

  The other patches fix compile warnings, utilize the Kbuild logic and
  cleanups the parisc arch code"

* 'parisc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: pci-dma: fix warning unused-function
  parisc/uapi: Use Kbuild logic to provide <asm/types.h>
  parisc: Make user stack size configurable
  parisc: Use _TIF_USER_WORK_MASK in entry.S
  parisc: Drop loops_per_jiffy from per_cpu struct

Pull MIPS updates from Thomas Bogendoerfer:

 - enable GCOV

 - rework setup of protection map

 - add support for more MSCC platforms

 - add sysfs boardinfo for Loongson64

 - enable KASLR for Loogson64

 - add reset controller for BCM63xx

 - cleanups and fixes

* tag 'mips_5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (70 commits)
  mips: fix Section mismatch in reference
  MAINTAINERS: Add linux-mips mailing list to JZ47xx entries
  MAINTAINERS: Remove JZ4780 DMA driver entry
  MAINTAINERS: chenhc@lemote.com -> chenhuacai@kernel.org
  MIPS: Octeon: irq: Alloc desc before configuring IRQ
  MIPS: mm: Add back define for PAGE_SHARED
  MIPS: Select ARCH_KEEP_MEMBLOCK if DEBUG_KERNEL to enable sysfs memblock debug
  mips: lib: uncached: fix non-standard usage of variable 'sp'
  MIPS: DTS: img: Fix schema warnings for pwm-leds
  MIPS: KASLR: Avoid endless loop in sync_icache if synci_step is zero
  MIPS: Move memblock_dump_all() to the end of setup_arch()
  MIPS: SMP-CPS: Add support for irq migration when CPU offline
  MIPS: OCTEON: Don't add kernel sections into memblock allocator
  MIPS: Don't round up kernel sections size for memblock_add()
  MIPS: Enable GCOV
  MIPS: configs: drop unused BACKLIGHT_GENERIC option
  MIPS: Loongson64: Fix up reserving kernel memory range
  MIPS: mm: Remove unused is_aligned_hugepage_range
  MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()
  mips: cdmm: fix use-after-free in mips_cdmm_bus_discover
  ...

Pull microblaze updates from Michal Simek:
 "The biggest change is to remove support for noMMU configuration.

  FPGAs are bigger so people use Microblaze with MMU for a lot of years
  and there is likely no user of this code anymore. No one is updating
  libraries for this configuration either.

   - Remove noMMU support

   - Add support for TIF_NOTIFY_SIGNAL

   - Small header fix"

* tag 'microblaze-v5.11' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Remove noMMU code
  microblaze: add support for TIF_NOTIFY_SIGNAL
  microblaze: Replace <linux/clk-provider.h> by <linux/of_clk.h>

Pull xen updates from Juergen Gross:
 "Fixes for security issues just having been disclosed:

   - a five patch series for fixing of XSA-349 (DoS via resource
     depletion in Xen dom0)

   - a patch fixing XSA-350 (access of stale pointer in a Xen dom0)"

* tag 'for-linus-5.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen-blkback: set ring->xenblkd to NULL after kthread_stop()
  xenbus/xenbus_backend: Disallow pending watch messages
  xen/xenbus: Count pending messages for each watch
  xen/xenbus/xen_bus_type: Support will_handle watch callback
  xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()
  xen/xenbus: Allow watches discard events before queueing

Merge tag 'hyperv-next-signed-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull Hyper-V updates from Wei Liu:

 - harden VMBus (Andres Beltran)

 - clean up VMBus driver (Matheus Castello)

 - fix hv_balloon reporting (Vitaly Kuznetsov)

 - fix a potential OOB issue (Andrea Parri)

 - remove an obsolete TODO item (Stefan Eschenbacher)

* tag 'hyperv-next-signed-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  hv_balloon: do adjust_managed_page_count() when ballooning/un-ballooning
  hv_balloon: simplify math in alloc_balloon_pages()
  drivers/hv: remove obsolete TODO and fix misleading typo in comment
  drivers: hv: vmbus: Fix checkpatch SPLIT_STRING
  hv_netvsc: Validate number of allocated sub-channels
  drivers: hv: vmbus: Fix call msleep using < 20ms
  drivers: hv: vmbus: Fix checkpatch LINE_SPACING
  drivers: hv: vmbus: Replace symbolic permissions by octal permissions
  drivers: hv: Fix hyperv_record_panic_msg path on comment
  hv_netvsc: Use vmbus_requestor to generate transaction IDs for VMBus hardening
  scsi: storvsc: Use vmbus_requestor to generate transaction IDs for VMBus hardening
  Drivers: hv: vmbus: Add vmbus_requestor data structure for VMBus hardening

Pull seccomp updates from Kees Cook:
 "The major change here is finally gaining seccomp constant-action
  bitmaps, which internally reduces the seccomp overhead for many
  real-world syscall filters to O(1), as discussed at Plumbers this
  year.

   - Improve seccomp performance via constant-action bitmaps (YiFei Zhu
     & Kees Cook)

   - Fix bogus __user annotations (Jann Horn)

   - Add missed CONFIG for improved selftest coverage (Mickaël Salaün)"

* tag 'seccomp-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  selftests/seccomp: Update kernel config
  seccomp: Remove bogus __user annotations
  seccomp/cache: Report cache data through /proc/pid/seccomp_cache
  xtensa: Enable seccomp architecture tracking
  sh: Enable seccomp architecture tracking
  s390: Enable seccomp architecture tracking
  riscv: Enable seccomp architecture tracking
  powerpc: Enable seccomp architecture tracking
  parisc: Enable seccomp architecture tracking
  csky: Enable seccomp architecture tracking
  arm: Enable seccomp architecture tracking
  arm64: Enable seccomp architecture tracking
  selftests/seccomp: Compare bitmap vs filter overhead
  x86: Enable seccomp architecture tracking
  seccomp/cache: Add "emulator" to check if filter is constant allow
  seccomp/cache: Lookup syscall allowlist bitmap for fast path

Pull pstore updates from Kees Cook:

 - Clean up unused but exposed API (Christoph Hellwig)

 - Provide KCONFIG for default size of kmsg buffer (Vasile-Laurentiu
   Stanimir)

* tag 'pstore-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Move kmsg_bytes default into Kconfig
  pstore/blk: remove {un,}register_pstore_blk
  pstore/blk: update the command line example
  pstore/zone: cap the maximum device size

Pull gcc-plugins updates from Kees Cook:

 - Clean up gcc plugin builds now that GCC must be 4.9+ (Masahiro
   Yamada)

 - Update MAINTAINERS (Kees Cook)

* tag 'gcc-plugins-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  MAINTAINERS: Drop inactive gcc-plugins maintainer
  gcc-plugins: simplify GCC plugin-dev capability test
  gcc-plugins: remove code for GCC versions older than 4.9

Pull smack updates from Casey Schaufler:
 "There are no functional changes. Just one minor code clean-up and a
  set of corrections in function header comments"

* tag 'Smack-for-5.11' of git://github.com/cschaufler/smack-next:
  security/smack: remove unused varible 'rc'
  Smack: fix kernel-doc interface on functions

Pull integrity subsystem updates from Mimi Zohar:
 "Just three patches here. Other integrity changes are being upstreamed
  via EFI (defines a common EFI secure and trusted boot IMA policy) and
  BPF LSM (exporting the IMA file cache hash info based on inode).

  The three patches included here:

   - bug fix: fail calculating the file hash, when a file not opened for
     read and the attempt to re-open it for read fails.

   - defer processing the "ima_appraise" boot command line option to
     avoid enabling different modes (e.g. fix, log) to when the secure
     boot flag is available on arm.

   - defines "ima-buf" as the default IMA buffer measurement template in
     preparation for the builtin integrity "critical data" policy"

* tag 'integrity-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
  ima: Don't modify file descriptor mode on the fly
  ima: select ima-buf template for buffer measurement
  ima: defer arch_ima_get_secureboot() call to IMA init time

Pull selinux updates from Paul Moore:
 "While we have a small number of SELinux patches for v5.11, there are a
  few changes worth highlighting:

   - Change the LSM network hooks to pass flowi_common structs instead
     of the parent flowi struct as the LSMs do not currently need the
     full flowi struct and they do not have enough information to use it
     safely (missing information on the address family).

     This patch was discussed both with Herbert Xu (representing team
     netdev) and James Morris (representing team
     LSMs-other-than-SELinux).

   - Fix how we handle errors in inode_doinit_with_dentry() so that we
     attempt to properly label the inode on following lookups instead of
     continuing to treat it as unlabeled.

   - Tweak the kernel logic around allowx, auditallowx, and dontauditx
     SELinux policy statements such that the auditx/dontauditx are
     effective even without the allowx statement.

  Everything passes our test suite"

* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
  selinux: Fix fall-through warnings for Clang
  selinux: drop super_block backpointer from superblock_security_struct
  selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
  selinux: allow dontauditx and auditallowx rules to take effect without allowx
  selinux: fix error initialization in inode_doinit_with_dentry()

Pull audit updates from Paul Moore:
 "A small set of audit patches for v5.11 with four patches in total and
  only one of any real significance.

  Richard's patch to trigger accompanying records causes the kernel to
  emit additional related records when an audit event occurs; helping
  provide some much needed context to events in the audit log. It is
  also worth mentioning that this is a revised patch based on an earlier
  attempt that had to be reverted in the v5.8 time frame.

  Everything passes our test suite, and with no problems reported please
  merge this for v5.11"

* tag 'audit-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: replace atomic_add_return()
  audit: fix macros warnings
  audit: trigger accompanying records when no rules present
  audit: fix a kernel-doc markup

Pull printk updates from Petr Mladek:

 - Finally allow parallel writes and reads into/from the lockless
   ringbuffer. But it is not a complete solution. Readers are still
   serialized against each other. And nested writes are still prevented
   by printk_safe per-CPU buffers.

 - Use ttynull as the ultimate fallback for /dev/console.

 - Officially allow disabling console output by using console="" or
   console=null

 - A few code cleanups

* tag 'printk-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: remove logbuf_lock writer-protection of ringbuffer
  printk: inline log_output(),log_store() in vprintk_store()
  printk: remove obsolete dead assignment
  printk/console: Allow to disable console output by using console="" or console=null
  init/console: Use ttynull as a fallback when there is no console
  printk: ringbuffer: Reference text_data_ring directly in callees.

Merge tag 'fallthrough-fixes-clang-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux

Pull fallthrough fixes from Gustavo A. R. Silva:
 "Fix many fall-through warnings when building with Clang 12.0.0
  using -Wimplicit-fallthrough.

   - powerpc: boot: include compiler_attributes.h (Nick Desaulniers)

   - Revert "lib: Revert use of fallthrough pseudo-keyword in lib/"
     (Nick Desaulniers)

   - powerpc: fix -Wimplicit-fallthrough (Nick Desaulniers)

   - lib: Fix fall-through warnings for Clang (Gustavo A. R. Silva)"

* tag 'fallthrough-fixes-clang-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
  lib: Fix fall-through warnings for Clang
  powerpc: fix -Wimplicit-fallthrough
  Revert "lib: Revert use of fallthrough pseudo-keyword in lib/"
  powerpc: boot: include compiler_attributes.h

Merge tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kunit updates from Shuah Khan:

 - documentation update and fix to kunit_tool to parse diagnostic
   messages correctly from David Gow

 - Support for Parameterized Testing and fs/ext4 test updates to use
   KUnit parameterized testing feature from Arpitha Raghunandan

 - Helper to derive file names depending on --build_dir argument from
   Andy Shevchenko

* tag 'linux-kselftest-kunit-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  fs: ext4: Modify inode-test.c to use KUnit parameterized testing feature
  kunit: Support for Parameterized Testing
  kunit: kunit_tool: Correctly parse diagnostic messages
  Documentation: kunit: provide guidance for testing many inputs
  kunit: Introduce get_file_path() helper

Merge tag 'linux-kselftest-next-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:

 - Much needed gpio test Makefile cleanup to various problems with test
   dependencies and build errors from Michael Ellerman

 - Enabling vDSO test on non x86 platforms from Vincenzo Frascino

 - Fix intel_pstate to replace deprecated ftime() usages with
   clock_gettime() from Tommi Rantala

 - cgroup test build fix on older releases from Sachin Sant

 - A couple of spelling mistake fixes

* tag 'linux-kselftest-next-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/cgroup: Fix build on older distros
  selftests/run_kselftest.sh: fix dry-run typo
  tool: selftests: fix spelling typo of 'writting'
  selftests/memfd: Fix implicit declaration warnings
  selftests: intel_pstate: ftime() is deprecated
  selftests/gpio: Add to CLEAN rule rather than overriding
  selftests/gpio: Fix build when source tree is read only
  selftests/gpio: Move include of lib.mk up
  selftests/gpio: Use TEST_GEN_PROGS_EXTENDED
  kselftest: Extend vdso correctness test to clock_gettime64
  kselftest: Move test_vdso to the vDSO test suite
  kselftest: Extend vDSO selftest to clock_getres
  kselftest: Extend vDSO selftest
  kselftest: Enable vDSO test on non x86 platforms

Merge tag 'linux-kselftest-fixes-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "Build fixes for clone3 and rseq tests"

* tag 'linux-kselftest-fixes-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/clone3: Fix build error
  rseq/selftests: Fix MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ build error under other arch.