- 09 Oct, 2012 40 commits
-
-
Michel Lespinasse authored
Fix an anon_vma locking issue in the following situation: - vma has no anon_vma - next has an anon_vma - vma is being shrunk / next is being expanded, due to an mprotect call We need to take next's anon_vma lock to avoid races with rmap users (such as page migration) while next is being expanded. Signed-off-by:
Michel Lespinasse <walken@google.com> Reviewed-by:
Andrea Arcangeli <aarcange@redhat.com> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xiao Guangrong authored
Since it is called in start_khugepaged Signed-off-by:
Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
-
Xiao Guangrong authored
Use khugepaged_enabled to see whether thp is enabled Signed-off-by:
-
Xiao Guangrong authored
Merge khugepaged_loop into khugepaged Signed-off-by:
-
Xiao Guangrong authored
They are used to abstract the difference between NUMA enabled and NUMA disabled to make the code more readable Signed-off-by:
-
Xiao Guangrong authored
If NUMA is enabled, we can release the page in the page pre-alloc operation, then the CONFIG_NUMA dependent code can be reduced Signed-off-by:
-
Xiao Guangrong authored
There are two pre-alloc operations in these two function, the different is: - it allows to sleep if page alloc fail in khugepaged_loop - it exits immediately if page alloc fail in khugepaged_do_scan Actually, in khugepaged_do_scan, we can allow the pre-alloc to sleep on the first failure, then the operation in khugepaged_loop can be removed Signed-off-by:
-
Xiao Guangrong authored
If NUMA is disabled, hpage is used as page pre-alloc, so there are two cases for hpage: - it is !NULL, means the page is not consumed otherwise, - the page has been consumed If NUMA is enabled, hpage is just used as alloc-fail indicator which is not a real page, NULL means not fail triggered. So, we can release the page only if !IS_ERR_OR_NULL Signed-off-by:
-
Xiao Guangrong authored
Add the check of kthread_should_stop() to the conditions which are used to wakeup on khugepaged_wait, then kthread_stop is enough to let the thread exit Signed-off-by:
-
Xiao Guangrong authored
Now, khugepaged creation and cancel are completely serial under the protection of khugepaged_mutex, it is impossible that many khugepaged entities are running Signed-off-by:
-
Xiao Guangrong authored
Currently, hugepaged_mutex is used really complexly and hard to understand, actually, it is just used to serialize start_khugepaged and khugepaged for these reasons: - khugepaged_thread is shared between them - the thp disable path (echo never > transparent_hugepage/enabled) is nonblocking, so we need to protect khugepaged_thread to get a stable running state These can be avoided by: - use the lock to serialize the thread creation and cancel - thp disable path can not finised until the thread exits Then khugepaged_thread is fully controlled by start_khugepaged, khugepaged will be happy without the lock Signed-off-by:
-
Xiao Guangrong authored
The check is unnecessary since if mm_slot_cache or mm_slots_hash initialize failed, no sysfs interface will be created Signed-off-by:
-
Xiao Guangrong authored
THP_COLLAPSE_ALLOC is double counted if NUMA is disabled since it has already been calculated in khugepaged_alloc_hugepage Signed-off-by:
-
Michel Lespinasse authored
Make sure the #endif that terminates the standard #ifndef / #define / #endif construct gets labeled, and gets positioned at the end of the file as is normally the case. Signed-off-by:
-
Will Deacon authored
The core page allocator ensures that page flags are zeroed when freeing pages via free_pages_check. A number of architectures (ARM, PPC, MIPS) rely on this property to treat new pages as dirty with respect to the data cache and perform the appropriate flushing before mapping the pages into userspace. This can lead to cache synchronisation problems when using hugepages, since the allocator keeps its own pool of pages above the usual page allocator and does not reset the page flags when freeing a page into the pool. This patch adds a new architecture hook, arch_clear_hugepage_flags, so that architectures which rely on the page flags being in a particular state for fresh allocations can adjust the flags accordingly when a page is freed into the pool. Signed-off-by:
Will Deacon <will.deacon@arm.com> Cc: Michal Hocko <mhocko@suse.cz> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Davidlohr Bueso authored
The deprecated /proc/<pid>/oom_adj is scheduled for removal this month. Signed-off-by:
Davidlohr Bueso <dave@gnu.org> Acked-by:
David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Gavin Shan authored
Fix the return value while failing to create the kswapd kernel thread. Also, the error message is prioritized as KERN_ERR. Signed-off-by:
Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by:
-
Gavin Shan authored
While registering MMU notifier, new instance of MMU notifier_mm will be allocated and later free'd if currrent mm_struct's MMU notifier_mm has been initialized. That causes some overhead. The patch tries to elominate that. Signed-off-by:
-
Sagi Grimberg authored
With an RCU based mmu_notifier implementation, any callout to mmu_notifier_invalidate_range_{start,end}() or mmu_notifier_invalidate_page() would not be allowed to call schedule() as that could potentially allow a modification to the mmu_notifier structure while it is currently being used. Since srcu allocs 4 machine words per instance per cpu, we may end up with memory exhaustion if we use srcu per mm. So all mms share a global srcu. Note that during large mmu_notifier activity exit & unregister paths might hang for longer periods, but it is tolerable for current mmu_notifier clients. Signed-off-by:Sagi Grimberg <sagig@mellanox.co.il> Signed-off-by:
-
Xiao Guangrong authored
There is a bug in set_pte_at_notify() which always sets the pte to the new page before releasing the old page in the secondary MMU. At this time, the process will access on the new page, but the secondary MMU still access on the old page, the memory is inconsistent between them The below scenario shows the bug more clearly: at the beginning: *p = 0, and p is write-protected by KSM or shared with parent process CPU 0 CPU 1 write 1 to p to trigger COW, set_pte_at_notify will be called: *pte = new_page + W; /* The W bit of pte is set */ *p = 1; /* pte is valid, so no #PF */ return back to secondary MMU, then the secondary MMU read p, but get: *p == 0; /* * !!!!!! * the host has already set p to 1, but the secondary * MMU still get the old value 0 */ call mmu_notifier_change_pte to release old page in secondary MMU We can fix it by release old page first, then set the pte to the new page. Note, the new page will be firstly used in secondary MMU before it is mapped into the page table of the process, but this is safe because it is protected by the page table lock, there is no race to change the pte [akpm@linux-foundation.org: add comment from Andrea] Signed-off-by: -
Mel Gorman authored
Commit cc9a6c87 ("cpuset: mm: reduce large amounts of memory barrier related damage v3") introduced a potential memory corruption. shmem_alloc_page() uses a pseudo vma and it has one significant unique combination, vma->vm_ops=NULL and vma->policy->flags & MPOL_F_SHARED. get_vma_policy() does NOT increase a policy ref when vma->vm_ops=NULL and mpol_cond_put() DOES decrease a policy ref when a policy has MPOL_F_SHARED. Therefore, when a cpuset update race occurs, alloc_pages_vma() falls in 'goto retry_cpuset' path, decrements the reference count and frees the policy prematurely. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Christoph Lameter <cl@linux.com> Cc: Josh Boyer <jwboyer@gmail.com> Signed-off-by:
-
KOSAKI Motohiro authored
When shared_policy_replace() fails to allocate new->policy is not freed correctly by mpol_set_shared_policy(). The problem is that shared mempolicy code directly call kmem_cache_free() in multiple places where it is easy to make a mistake. This patch creates an sp_free wrapper function and uses it. The bug was introduced pre-git age (IOW, before 2.6.12-rc2). [mgorman@suse.de: Editted changelog] Signed-off-by:
-
Mel Gorman authored
shared_policy_replace() use of sp_alloc() is unsafe. 1) sp_node cannot be dereferenced if sp->lock is not held and 2) another thread can modify sp_node between spin_unlock for allocating a new sp node and next spin_lock. The bug was introduced before 2.6.12-rc2. Kosaki's original patch for this problem was to allocate an sp node and policy within shared_policy_replace and initialise it when the lock is reacquired. I was not keen on this approach because it partially duplicates sp_alloc(). As the paths were sp->lock is taken are not that performance critical this patch converts sp->lock to sp->mutex so it can sleep when calling sp_alloc(). [kosaki.motohiro@jp.fujitsu.com: Original patch] Signed-off-by:
-
KOSAKI Motohiro authored
Dave Jones' system call fuzz testing tool "trinity" triggered the following bug error with slab debugging enabled ============================================================================= BUG numa_policy (Not tainted): Poison overwritten ----------------------------------------------------------------------------- INFO: 0xffff880146498250-0xffff880146498250. First byte 0x6a instead of 0x6b INFO: Allocated in mpol_new+0xa3/0x140 age=46310 cpu=6 pid=32154 __slab_alloc+0x3d3/0x445 kmem_cache_alloc+0x29d/0x2b0 mpol_new+0xa3/0x140 sys_mbind+0x142/0x620 system_call_fastpath+0x16/0x1b INFO: Freed in __mpol_put+0x27/0x30 age=46268 cpu=6 pid=32154 __slab_free+0x2e/0x1de kmem_cache_free+0x25a/0x260 __mpol_put+0x27/0x30 remove_vma+0x68/0x90 exit_mmap+0x118/0x140 mmput+0x73/0x110 exit_mm+0x108/0x130 do_exit+0x162/0xb90 do_group_exit+0x4f/0xc0 sys_exit_group+0x17/0x20 system_call_fastpath+0x16/0x1b INFO: Slab 0xffffea0005192600 objects=27 used=27 fp=0x (null) flags=0x20000000004080 INFO: Object 0xffff880146498250 @offset=592 fp=0xffff88014649b9d0 The problem is that the structure is being prematurely freed due to a reference count imbalance. In the following case mbind(addr, len) should replace the memory policies of both vma1 and vma2 and thus they will become to share the same mempolicy and the new mempolicy will have the MPOL_F_SHARED flag. +-------------------+-------------------+ | vma1 | vma2(shmem) | +-------------------+-------------------+ | | addr addr+len alloc_pages_vma() uses get_vma_policy() and mpol_cond_put() pair for maintaining the mempolicy reference count. The current rule is that get_vma_policy() only increments refcount for shmem VMA and mpol_conf_put() only decrements refcount if the policy has MPOL_F_SHARED. In above case, vma1 is not shmem vma and vma->policy has MPOL_F_SHARED! The reference count will be decreased even though was not increased whenever alloc_page_vma() is called. This has been broken since commit [52cd3b07: mempolicy: rework mempolicy Reference Counting] in 2008. There is another serious bug with the sharing of memory policies. Currently, mempolicy rebind logic (it is called from cpuset rebinding) ignores a refcount of mempolicy and override it forcibly. Thus, any mempolicy sharing may cause mempolicy corruption. The bug was introduced by commit [68860ec1: cpusets: automatic numa mempolicy rebinding]. Ideally, the shared policy handling would be rewritten to either properly handle COW of the policy structures or at least reference count MPOL_F_SHARED based exclusively on information within the policy. However, this patch takes the easier approach of disabling any policy sharing between VMAs. Each new range allocated with sp_alloc will allocate a new policy, set the reference count to 1 and drop the reference count of the old policy. This increases the memory footprint but is not expected to be a major problem as mbind() is unlikely to be used for fine-grained ranges. It is also inefficient because it means we allocate a new policy even in cases where mbind_range() could use the new_policy passed to it. However, it is more straight-forward and the change should be invisible to the user. [mgorman@suse.de: Edited changelog] Reported-by: Dave Jones <davej@redhat.com>, Cc: Christoph Lameter <cl@linux.com>, Reviewed-by: -
KOSAKI Motohiro authored
Commit 05f144a0 ("mm: mempolicy: Let vma_merge and vma_split handle vma->vm_policy linkages") removed vma->vm_policy updates code but it is the purpose of mbind_range(). Now, mbind_range() is virtually a no-op and while it does not allow memory corruption it is not the right fix. This patch is a revert. [mgorman@suse.de: Edited changelog] Signed-off-by:
-
Mel Gorman authored
While compaction is migrating pages to free up large contiguous blocks for allocation it races with other allocation requests that may steal these blocks or break them up. This patch alters direct compaction to capture a suitable free page as soon as it becomes available to reduce this race. It uses similar logic to split_free_page() to ensure that watermarks are still obeyed. Signed-off-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
-
Mel Gorman authored
If allocation fails after compaction then compaction may be deferred for a number of allocation attempts. If there are subsequent failures, compact_defer_shift is increased to defer for longer periods. This patch uses that information to scale the number of pages reclaimed with compact_defer_shift until allocations succeed again. The rationale is that reclaiming the normal number of pages still allowed compaction to fail and its success depends on the number of pages. If it's failing, reclaim more pages until it succeeds again. Note that this is not implying that VM reclaim is not reclaiming enough pages or that its logic is broken. try_to_free_pages() always asks for SWAP_CLUSTER_MAX pages to be reclaimed regardless of order and that is what it does. Direct reclaim stops normally with this check. if (sc->nr_reclaimed >= sc->nr_to_reclaim) goto out; should_continue_reclaim delays when that check is made until a minimum number of pages for reclaim/compaction are reclaimed. It is possible that this patch could instead set nr_to_reclaim in try_to_free_pages() and drive it from there but that's behaves differently and not necessarily for the better. If driven from do_try_to_free_pages(), it is also possible that priorities will rise. When they reach DEF_PRIORITY-2, it will also start stalling and setting pages for immediate reclaim which is more disruptive than not desirable in this case. That is a more wide-reaching change that could cause another regression related to THP requests causing interactive jitter. [akpm@linux-foundation.org: fix build] Signed-off-by:
-
Mel Gorman authored
Allocation success rates have been far lower since 3.4 due to commit fe2c2a10 ("vmscan: reclaim at order 0 when compaction is enabled"). This commit was introduced for good reasons and it was known in advance that the success rates would suffer but it was justified on the grounds that the high allocation success rates were achieved by aggressive reclaim. Success rates are expected to suffer even more in 3.6 due to commit 7db8889a ("mm: have order > 0 compaction start off where it left") which testing has shown to severely reduce allocation success rates under load - to 0% in one case. This series aims to improve the allocation success rates without regressing the benefits of commit fe2c2a10. The series is based on latest mmotm and takes into account the __GFP_NO_KSWAPD flag is going away. Patch 1 updates a stale comment seeing as I was in the general area. Patch 2 updates reclaim/compaction to reclaim pages scaled on the number of recent failures. Patch 3 captures suitable high-order pages freed by compaction to reduce races with parallel allocation requests. Patch 4 fixes the upstream commit [7db8889a: mm: have order > 0 compaction start off where it left] to enable compaction again Patch 5 identifies when compacion is taking too long due to contention and aborts. STRESS-HIGHALLOC 3.6-rc1-akpm full-series Pass 1 36.00 ( 0.00%) 51.00 (15.00%) Pass 2 42.00 ( 0.00%) 63.00 (21.00%) while Rested 86.00 ( 0.00%) 86.00 ( 0.00%) From http://www.csn.ul.ie/~mel/postings/mmtests-20120424/global-dhp__stress-highalloc-performance-ext3/hydra/comparison.html I know that the allocation success rates in 3.3.6 was 78% in comparison to 36% in in the current akpm tree. With the full series applied, the success rates are up to around 51% with some variability in the results. This is not as high a success rate but it does not reclaim excessively which is a key point. MMTests Statistics: vmstat Page Ins 3050912 3078892 Page Outs 8033528 8039096 Swap Ins 0 0 Swap Outs 0 0 Note that swap in/out rates remain at 0. In 3.3.6 with 78% success rates there were 71881 pages swapped out. Direct pages scanned 70942 122976 Kswapd pages scanned 1366300 1520122 Kswapd pages reclaimed 1366214 1484629 Direct pages reclaimed 70936 105716 Kswapd efficiency 99% 97% Kswapd velocity 1072.550 1182.615 Direct efficiency 99% 85% Direct velocity 55.690 95.672 The kswapd velocity changes very little as expected. kswapd velocity is around the 1000 pages/sec mark where as in kernel 3.3.6 with the high allocation success rates it was 8140 pages/second. Direct velocity is higher as a result of patch 2 of the series but this is expected and is acceptable. The direct reclaim and kswapd velocities change very little. If these get accepted for merging then there is a difficulty in how they should be handled. 7db8889a ("mm: have order > 0 compaction start off where it left") is broken but it is already in 3.6-rc1 and needs to be fixed. However, if just patch 4 from this series is applied then Jim Schutt's workload is known to break again as his workload also requires patch 5. While it would be preferred to have all these patches in 3.6 to improve compaction in general, it would at least be acceptable if just patches 4 and 5 were merged to 3.6 to fix a known problem without breaking compaction completely. On the face of it, that would force __GFP_NO_KSWAPD patches to be merged at the same time but I can do a version of this series with __GFP_NO_KSWAPD change reverted and then rebase it on top of this series. That might be best overall because I note that the __GFP_NO_KSWAPD patch should have removed deferred_compaction from page_alloc.c but it didn't but fixing that causes collisions with this series. This patch: The comment about order applied when the check was order > PAGE_ALLOC_COSTLY_ORDER which has not been the case since c5a73c3d ("thp: use compaction for all allocation orders"). Fixing the comment while I'm in the general area. Signed-off-by:
-
Hugh Dickins authored
People get confused by find_vma_prepare(), because it doesn't care about what it returns in its output args, when its callers won't be interested. Clarify by passing in end-of-range address too, and returning failure if any existing vma overlaps the new range: instead of returning an ambiguous vma which most callers then must check. find_vma_links() is a clearer name. This does revert 2.6.27's dfe195fb ("mm: fix uninitialized variables for find_vma_prepare callers"), but it looks like gcc 4.3.0 was one of those releases too eager to shout about uninitialized variables: only copy_vma() warns with 4.5.1 and 4.7.1, which a BUG on error silences. [hughd@google.com: fix warning, remove BUG()] Signed-off-by:
Hillf Danton <dhillf@gmail.com> Signed-off-by:
-
Robin Dong authored
When writing a new file with 2048 bytes buffer, such as write(fd, buffer, 2048), it will call generic_perform_write() twice for every page: write_begin mark_page_accessed(page) write_end write_begin mark_page_accessed(page) write_end Pages 1-13 will be added to lru-pvecs in write_begin() and will *NOT* be added to active_list even they have be accessed twice because they are not PageLRU(page). But when page 14th comes, all pages in lru-pvecs will be moved to inactive_list (by __lru_cache_add() ) in first write_begin(), now page 14th *is* PageLRU(page). And after second write_end() only page 14th will be in active_list. In Hadoop environment, we do comes to this situation: after writing a file, we find out that only 14th, 28th, 42th... page are in active_list and others in inactive_list. Now kswapd works, shrinks the inactive_list, the file only have 14th, 28th...pages in memory, the readahead request size will be broken to only 52k (13*4k), system's performance falls dramatically. This problem can also replay by below steps (the machine has 8G memory): 1. dd if=/dev/zero of=/test/file.out bs=1024 count=1048576 2. cat another 7.5G file to /dev/null 3. vmtouch -m 1G -v /test/file.out, it will show: /test/file.out [oooooooooooooooooooOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO] 187847/262144 the 'o' means same pages are in memory but same are not. The solution for this problem is simple: the 14th page should be added to lru_add_pvecs before mark_page_accessed() just as other pages. [akpm@linux-foundation.org: tweak comment] [akpm@linux-foundation.org: grab better comment from the v3 patch] Signed-off-by:
Robin Dong <sanbai@taobao.com> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
-
Konstantin Khlebnikov authored
A long time ago, in v2.4, VM_RESERVED kept swapout process off VMA, currently it lost original meaning but still has some effects: | effect | alternative flags -+------------------------+--------------------------------------------- 1| account as reserved_vm | VM_IO 2| skip in core dump | VM_IO, VM_DONTDUMP 3| do not merge or expand | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP 4| do not mlock | VM_IO, VM_DONTEXPAND, VM_HUGETLB, VM_PFNMAP This patch removes reserved_vm counter from mm_struct. Seems like nobody cares about it, it does not exported into userspace directly, it only reduces total_vm showed in proc. Thus VM_RESERVED can be replaced with VM_IO or pair VM_DONTEXPAND | VM_DONTDUMP. remap_pfn_range() and io_remap_pfn_range() set VM_IO|VM_DONTEXPAND|VM_DONTDUMP. remap_vmalloc_range() set VM_DONTEXPAND | VM_DONTDUMP. [akpm@linux-foundation.org: drivers/vfio/pci/vfio_pci.c fixup] Signed-off-by:
Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by:
-
Konstantin Khlebnikov authored
Rename VM_NODUMP into VM_DONTDUMP: this name matches other negative flags: VM_DONTEXPAND, VM_DONTCOPY. Currently this flag used only for sys_madvise. The next patch will use it for replacing the outdated flag VM_RESERVED. Also forbid madvise(MADV_DODUMP) for special kernel mappings VM_SPECIAL (VM_IO | VM_DONTEXPAND | VM_RESERVED | VM_PFNMAP) Signed-off-by:
-
Konstantin Khlebnikov authored
Currently the kernel sets mm->exe_file during sys_execve() and then tracks number of vmas with VM_EXECUTABLE flag in mm->num_exe_file_vmas, as soon as this counter drops to zero kernel resets mm->exe_file to NULL. Plus it resets mm->exe_file at last mmput() when mm->mm_users drops to zero. VMA with VM_EXECUTABLE flag appears after mapping file with flag MAP_EXECUTABLE, such vmas can appears only at sys_execve() or after vma splitting, because sys_mmap ignores this flag. Usually binfmt module sets mm->exe_file and mmaps executable vmas with this file, they hold mm->exe_file while task is running. comment from v2.6.25-6245-g925d1c40 ("procfs task exe symlink"), where all this stuff was introduced: > The kernel implements readlink of /proc/pid/exe by getting the file from > the first executable VMA. Then the path to the file is reconstructed and > reported as the result. > > Because of the VMA walk the code is slightly different on nommu systems. > This patch avoids separate /proc/pid/exe code on nommu systems. Instead of > walking the VMAs to find the first executable file-backed VMA we store a > reference to the exec'd file in the mm_struct. > > That reference would prevent the filesystem holding the executable file > from being unmounted even after unmapping the VMAs. So we track the number > of VM_EXECUTABLE VMAs and drop the new reference when the last one is > unmapped. This avoids pinning the mounted filesystem. exe_file's vma accounting is hooked into every file mmap/unmmap and vma split/merge just to fix some hypothetical pinning fs from umounting by mm, which already unmapped all its executable files, but still alive. Seems like currently nobody depends on this behaviour. We can try to remove this logic and keep mm->exe_file until final mmput(). mm->exe_file is still protected with mm->mmap_sem, because we want to change it via new sys_prctl(PR_SET_MM_EXE_FILE). Also via this syscall task can change its mm->exe_file and unpin mountpoint explicitly. Signed-off-by:
-
Konstantin Khlebnikov authored
Some security modules and oprofile still uses VM_EXECUTABLE for retrieving a task's executable file. After this patch they will use mm->exe_file directly. mm->exe_file is protected with mm->mmap_sem, so locking stays the same. Signed-off-by:
James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by:
-
Konstantin Khlebnikov authored
Move actual pte filling for non-linear file mappings into the new special vma operation: ->remap_pages(). Filesystems must implement this method to get non-linear mapping support, if it uses filemap_fault() then generic_file_remap_pages() can be used. Now device drivers can implement this method and obtain nonlinear vma support. Signed-off-by:
-
Konstantin Khlebnikov authored
Merge VM_INSERTPAGE into VM_MIXEDMAP. VM_MIXEDMAP VMA can mix pure-pfn ptes, special ptes and normal ptes. Now copy_page_range() always copies VM_MIXEDMAP VMA on fork like VM_PFNMAP. If driver populates whole VMA at mmap() it probably not expects page-faults. This patch removes special check from vma_wants_writenotify() which disables pages write tracking for VMA populated via vm_instert_page(). BDI below mapped file should not use dirty-accounting, moreover do_wp_page() can handle this. vm_insert_page() still marks vma after first usage. Usually it is called from f_op->mmap() handler under mm->mmap_sem write-lock, so it able to change vma->vm_flags. Caller must set VM_MIXEDMAP at mmap time if it wants to call this function from other places, for example from page-fault handler. Signed-off-by:
-
Konstantin Khlebnikov authored
Combine several arch-specific vma flags into one. before patch: 0x00000200 0x01000000 0x20000000 0x40000000 x86 VM_NOHUGEPAGE VM_HUGEPAGE - VM_PAT powerpc - - VM_SAO - parisc VM_GROWSUP - - - ia64 VM_GROWSUP - - - nommu - VM_MAPPED_COPY - - others - - - - after patch: 0x00000200 0x01000000 0x20000000 0x40000000 x86 - VM_PAT VM_HUGEPAGE VM_NOHUGEPAGE powerpc - VM_SAO - - parisc - VM_GROWSUP - - ia64 - VM_GROWSUP - - nommu - VM_MAPPED_COPY - - others - VM_ARCH_1 - - And voila! One completely free bit. Signed-off-by: -
Konstantin Khlebnikov authored
Replace the generic vma-flag VM_PFN_AT_MMAP with x86-only VM_PAT. We can toss mapping address from remap_pfn_range() into track_pfn_vma_new(), and collect all PAT-related logic together in arch/x86/. This patch also restores orignal frustration-free is_cow_mapping() check in remap_pfn_range(), as it was before commit v2.6.28-rc8-88-g3c8bb73a ("x86: PAT: store vm_pgoff for all linear_over_vma_region mappings - v3") is_linear_pfn_mapping() checks can be removed from mm/huge_memory.c, because it already handled by VM_PFNMAP in VM_NO_THP bit-mask. [suresh.b.siddha@intel.com: Reset the VM_PAT flag as part of untrack_pfn_vma()] Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Cc: Venkatesh Pallipadi <venki@google.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Ingo Molnar <mingo@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Eric Paris <eparis@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Venkatesh Pallipadi <venki@google.com> Acked-by:
-
Suresh Siddha authored
With PAT enabled, vm_insert_pfn() looks up the existing pfn memory attribute and uses it. Expectation is that the driver reserves the memory attributes for the pfn before calling vm_insert_pfn(). remap_pfn_range() (when called for the whole vma) will setup a new attribute (based on the prot argument) for the specified pfn range. This addresses the legacy usage which typically calls remap_pfn_range() with a desired memory attribute. For ranges smaller than the vma size (which is typically not the case), remap_pfn_range() will use the existing memory attribute for the pfn range. Expose two different API's for these different behaviors. track_pfn_insert() for tracking the pfn attribute set by vm_insert_pfn() and track_pfn_remap() for the remap_pfn_range(). This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear checks in track_pfn_remap()] [akpm@linux-foundation.org: tweak a few comments] Signed-off-by:
-
Suresh Siddha authored
'pfn' argument for track_pfn_vma_new() can be used for reserving the attribute for the pfn range. No need to depend on 'vm_pgoff' Similarly, untrack_pfn_vma() can depend on the 'pfn' argument if it is non-zero or can use follow_phys() to get the starting value of the pfn range. Also the non zero 'size' argument can be used instead of recomputing it from vma. This cleanup also prepares the ground for the track/untrack pfn vma routines to take over the ownership of setting PAT specific vm_flag in the 'vma'. [khlebnikov@openvz.org: Clear pfn to paddr conversion] Signed-off-by:
-
