- 15 May, 2020 27 commits
-
-
Vlad Buslov authored
Extend tcf_action_dump() with boolean argument 'terse' that is used to request terse-mode action dump. In terse mode only essential data needed to identify particular action (action kind, cookie, etc.) and its stats is put to resulting skb and everything else is omitted. Implement tcf_exts_terse_dump() helper in cls API that is intended to be used to request terse dump of all exts (actions) attached to the filter. Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vlad Buslov authored
Add new TCA_DUMP_FLAGS attribute and use it in cls API to request terse filter output from classifiers with TCA_DUMP_FLAGS_TERSE flag. This option is intended to be used to improve performance of TC filter dump when userland only needs to obtain stats and not the whole classifier/action data. Extend struct tcf_proto_ops with new terse_dump() callback that must be defined by supporting classifier implementations. Support of the options in specific classifiers and actions is implemented in following patches in the series. Signed-off-by:
-
Tobias Waldekranz authored
The assumption that a device node is associated either with the netdev's device, or the parent of that device, does not hold for all drivers. E.g. Freescale's DPAA has two layers of platform devices above the netdev. Instead, recursively walk up the tree from the netdev, allowing any parent to match against the sought after node. Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-05-14 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Merged tag 'perf-for-bpf-2020-05-06' from tip tree that includes CAP_PERFMON. 2) support for narrow loads in bpf_sock_addr progs and additional helpers in cg-skb progs, from Andrey. 3) bpf benchmark runner, from Andrii. 4) arm and riscv JIT optimizations, from Luke. 5) bpf iterator infrastructure, from Yonghong. ==================== Signed-off-by: -
Alexei Starovoitov authored
Andrey Ignatov says: ==================== v2->v3: - better documentation for bpf_sk_cgroup_id in uapi (Yonghong Song) - save/restore errno in network helpers (Yonghong Song) - cleanup leftover after switching selftest to skeleton (Yonghong Song) - switch from map to skel->bss in selftest (Yonghong Song) v1->v2: - switch selftests to skeleton. This patch set allows a bunch of existing sk lookup and skb cgroup id helpers, and adds two new bpf_sk_{,ancestor_}cgroup_id helpers to be used in cgroup skb programs. It fills the gap to cover a use-case to apply intra-host cgroup-bpf network policy based on a source cgroup a packet comes from. For example, there can be multiple containers A, B, C running on a host. Every such container runs in its own cgroup that can have multiple sub-cgroups. But all these containers can share some IP addresses. At the same time container A wants to have a policy for a server S running in it so that only clients from this same container can connect to S, but not from other containers (such as B, C). Source IP address can't be used to decide whether to allow or deny a packet, but it looks reasonable to filter by cgroup id. The patch set allows to implement the following policy: * when an ingress packet comes to container's cgroup, lookup peer (client) socket this packet comes from; * having peer socket, get its cgroup id; * compare peer cgroup id with self cgroup id and allow packet only if they match, i.e. it comes from same cgroup; * the "sub-cgroup" part of the story can be addressed by getting not direct cgroup id of the peer socket, but ancestor cgroup id on specified level, similar to existing "ancestor" flavors of cgroup id helpers. A newly introduced selftest implements such a policy in its basic form to provide a better idea on the use-case. Patch 1 allows existing sk lookup helpers in cgroup skb. Patch 2 allows skb_ancestor_cgroup_id in cgrou skb. Patch 3 introduces two new helpers to get cgroup id of socket. Patch 4 extends network helpers to use them in the next patch. Patch 5 adds selftest / example of use-case. ==================== Signed-off-by:Alexei Starovoitov <ast@kernel.org>
-
Andrey Ignatov authored
Test bpf_sk_lookup_tcp, bpf_sk_release, bpf_sk_cgroup_id and bpf_sk_ancestor_cgroup_id helpers from cgroup skb program. The test creates a testing cgroup, starts a TCPv6 server inside the cgroup and creates two client sockets: one inside testing cgroup and one outside. Then it attaches cgroup skb program to the cgroup that checks all TCP segments coming to the server and allows only those coming from the cgroup of the server. If a segment comes from a peer outside of the cgroup, it'll be dropped. Finally the test checks that client from inside testing cgroup can successfully connect to the server, but client outside the cgroup fails to connect by timeout. The main goal of the test is to check newly introduced bpf_sk_{,ancestor_}cgroup_id helpers. It also checks a couple of socket lookup helpers (tcp & release), but lookup helpers were introduced much earlier and covered by other tests. Here it's mostly checked that they can be called from cgroup skb. Signed-off-by:Andrey Ignatov <rdna@fb.com> Signed-off-by:
Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/171f4c5d75e8ff4fe1c4e8c1c12288b5240a4549.1589486450.git.rdna@fb.com
-
Andrey Ignatov authored
Add two new network helpers. connect_fd_to_fd connects an already created client socket fd to address of server fd. Sometimes it's useful to separate client socket creation and connecting this socket to a server, e.g. if client socket has to be created in a cgroup different from that of server cgroup. Additionally connect_to_fd is now implemented using connect_fd_to_fd, both helpers don't treat EINPROGRESS as an error and let caller decide how to proceed with it. connect_wait is a helper to work with non-blocking client sockets so that if connect_to_fd or connect_fd_to_fd returned -1 with errno == EINPROGRESS, caller can wait for connect to finish or for connection timeout. The helper returns -1 on error, 0 on timeout (1sec, hard-coded), and positive number on success. Signed-off-by:
-
Andrey Ignatov authored
With having ability to lookup sockets in cgroup skb programs it becomes useful to access cgroup id of retrieved sockets so that policies can be implemented based on origin cgroup of such socket. For example, a container running in a cgroup can have cgroup skb ingress program that can lookup peer socket that is sending packets to a process inside the container and decide whether those packets should be allowed or denied based on cgroup id of the peer. More specifically such ingress program can implement intra-host policy "allow incoming packets only from this same container and not from any other container on same host" w/o relying on source IP addresses since quite often it can be the case that containers share same IP address on the host. Introduce two new helpers for this use-case: bpf_sk_cgroup_id() and bpf_sk_ancestor_cgroup_id(). These helpers are similar to existing bpf_skb_{,ancestor_}cgroup_id helpers with the only difference that sk is used to get cgroup id instead of skb, and share code with them. See documentation in UAPI for more details. Signed-off-by: -
Andrey Ignatov authored
cgroup skb programs already can use bpf_skb_cgroup_id. Allow bpf_skb_ancestor_cgroup_id as well so that container policies can be implemented for a container that can have sub-cgroups dynamically created, but policies should still be implemented based on cgroup id of container itself not on an id of a sub-cgroup. Signed-off-by:
-
Andrey Ignatov authored
Currently sk lookup helpers are allowed in tc, xdp, sk skb, and cgroup sock_addr programs. But they would be useful in cgroup skb as well so that for example cgroup skb ingress program can lookup a peer socket a packet comes from on same host and make a decision whether to allow or deny this packet based on the properties of that socket, e.g. cgroup that peer socket belongs to. Allow the following sk lookup helpers in cgroup skb: * bpf_sk_lookup_tcp; * bpf_sk_lookup_udp; * bpf_sk_release; * bpf_skc_lookup_tcp. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in an error message, fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Andrii Nakryiko authored
task_seq_get_next might stop prematurely if get_pid_task() fails to get task_struct. Failure to do so doesn't mean that there are no more tasks with higher pids. Procfs's iteration algorithm (see next_tgid in fs/proc/base.c) does a retry in such case. After this fix, instead of stopping prematurely after about 300 tasks on my server, bpf_iter program now returns >4000, which sounds much closer to reality. Fixes: eaaacd23 ("bpf: Add task and task/file iterator targets") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
-
Andrey Ignatov authored
Test 1,2,4-byte loads from bpf_sock_addr.user_port in sock_addr programs. Signed-off-by:
-
Andrey Ignatov authored
bpf_sock_addr.user_port supports only 4-byte load and it leads to ugly code in BPF programs, like: volatile __u32 user_port = ctx->user_port; __u16 port = bpf_ntohs(user_port); Since otherwise clang may optimize the load to be 2-byte and it's rejected by verifier. Add support for 1- and 2-byte loads same way as it's supported for other fields in bpf_sock_addr like user_ip4, msg_src_ip4, etc. Signed-off-by:
-
Lorenzo Bianconi authored
xdp_redirect_cpu is currently failing in bpf_prog_load_xattr() allocating cpu_map map if CONFIG_NR_CPUS is less than 64 since cpu_map_alloc() requires max_entries to be less than NR_CPUS. Set cpu_map max_entries according to NR_CPUS in xdp_redirect_cpu_kern.c and get currently running cpus in xdp_redirect_cpu_user.c Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Heiner Kallweit authored
93882c6f ("r8169: switch from netif_xxx message functions to netdev_xxx") removed the last module parameter from the driver, therefore there's no need any longer to include linux/moduleparam.h. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
After 9de5d235 ("net: phy: fix aneg restart in phy_ethtool_set_eee") we don't need the check for aneg being enabled any longer, and as discussed with Russell configuring the EEE advertisement should be supported even if we're in a half-duplex mode currently. Signed-off-by:
-
Colin Ian King authored
Currently burst is clamping on rate and not burst, the assignment of burst from the clamping discards the previous assignment of burst. This looks like a cut-n-paste error from the previous clamping calculation on ramp. Fix this by replacing ramp with burst. Addresses-Coverity: ("Unused value") Fixes: 0fbabf87 ("net: dsa: felix: add support Credit Based Shaper(CBS) for hardware offload") Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Bartosz Golaszewski authored
mdio-moxart doesn't use regulators in the driver code. We can remove the regulator include. Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
Dan Murphy authored
Convert the dp83867 binding to yaml. Signed-off-by:
Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Dan Murphy authored
Add BSD 2 Clause to the licensing. CC: Rob Herring <robh@kernel.org> Signed-off-by:
-
Luo bin authored
update huawei ethernet driver maintainer from aviad to Bin luo Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
Luo bin authored
support to change TX/RX queue depth with ethtool -G Signed-off-by:
-
Jakub Kicinski authored
Clean up after recent fixes, move address calculations around and change the variable init, so that we can have just one start_offset == end_offset check. Make the check a little stricter to preserve the -EINVAL error if requested start offset is larger than the region itself. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Murali Karicheri says: ==================== am65-cpsw: add taprio/EST offload support AM65 CPSW h/w supports Enhanced Scheduled Traffic (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018) configuration. EST allows express queue traffic to be scheduled (placed) on the wire at specific repeatable time intervals. In Linux kernel, EST configuration is done through tc command and the taprio scheduler in the net core implements a software only scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration, user indicate "flag 2" in the command which is then parsed by taprio scheduler in net core and indicate that the command is to be offloaded to h/w. taprio then offloads the command to the driver by calling ndo_setup_tc() ndo ops. This patch implements ndo_setup_tc() as well as other changes required to offload EST configuration to CPSW h/w For more details please refer patch 2/2. This series is based on original work done by Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> to add taprio offload support to AM65 CPSW 2G. 1. Example configuration 3 Gates ifconfig eth0 down ethtool -L eth0 tx 3 ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off ifconfig eth0 192.168.2.20 tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 3 \ map 0 0 1 2 0 0 0 0 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 \ base-time 0000 \ sched-entry S 4 125000 \ sched-entry S 2 125000 \ sched-entry S 1 250000 \ flags 2 2. Example configuration 8 Gates ifconfig eth0 down ethtool -L eth0 tx 8 ethtool --set-priv-flags eth0 p0-rx-ptype-rrobin off ifconfig eth0 192.168.2.20 tc qdisc replace dev eth0 parent root handle 100 taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0000 \ sched-entry S 80 125000 \ sched-entry S 40 125000 \ sched-entry S 20 125000 \ sched-entry S 10 125000 \ sched-entry S 08 125000 \ sched-entry S 04 125000 \ sched-entry S 02 125000 \ sched-entry S 01 125000 \ flags 2 Classify frames to particular priority using skbedit so that they land at a specific queue in cpsw h/w which is Gated by the EST gate which opens based on the sched-entry. tc qdisc add dev eth0 clsact In the below for example an iperf3 session with destination port 5007 will go through Q7. tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5007 0xffff action skbedit priority 7 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5006 0xffff action skbedit priority 6 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5005 0xffff action skbedit priority 5 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5004 0xffff action skbedit priority 4 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5003 0xffff action skbedit priority 3 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5002 0xffff action skbedit priority 2 tc filter add dev eth0 egress protocol ip prio 1 u32 match ip dport 5001 0xffff action skbedit priority 1 iperf3 -c 192.168.2.10 -u -l1470 -b32M -t1 -p 5007 Testing was done by capturing frames at the PC using wireshark and checking for the bust interval or cycle time of UDP frames with a specific port number. Verified that the distance between first frame of a burst (cycle-time) is 1 milli second and burst duration is within 125 usec based on the received packet timestamp shown in wireshark packet display. ==================== Signed-off-by: -
Ivan Khoronzhuk authored
AM65 CPSW h/w supports Enhanced Scheduled Traffic (EST – defined in P802.1Qbv/D2.2 that later got included in IEEE 802.1Q-2018) configuration. EST allows express queue traffic to be scheduled (placed) on the wire at specific repeatable time intervals. In Linux kernel, EST configuration is done through tc command and the taprio scheduler in the net core implements a software only scheduler (SCH_TAPRIO). If the NIC is capable of EST configuration, user indicate "flag 2" in the command which is then parsed by taprio scheduler in net core and indicate that the command is to be offloaded to h/w. taprio then offloads the command to the driver by calling ndo_setup_tc() ndo ops. This patch implements ndo_setup_tc() to offload EST configuration to CPSW h/w. Currently driver supports only SetGateStates operation. EST operates on a repeating time interval generated by the CPTS EST function generator. Each Ethernet port has a global EST fetch RAM that can be configured as 2 buffers, each of 64 locations or one large buffer of 128 locations. In 2 buffer configuration, a ping pong mechanism is used to hold the active schedule (oper) in one buffer and new (admin) command in the other. Each 22-bit fetch command consists of a 14-bit fetch count (14 MSB’s) and an 8-bit priority fetch allow (8 LSB’s) that will be applied for the fetch count time in wireside clocks. Driver process each of the sched-entry in the offload command and update the fetch RAM. Driver configures duration in sched-entry into the fetch count and Gate mask into the priority fetch bits of the RAM. Then configures the CPTS EST function generator to activate the schedule. Currently driver supports only 2 buffer configuration which means driver supports a max cycle time of ~8 msec. CPSW supports a configurable number of priority queues (up to 8) and needs to be switched to this mode from the default round robin mode before EST can be offloaded. User configures these through ethtool commands (-L for changing number of queues and --set-priv-flags to disable round robin mode). Driver doesn't enable EST if pf_p0_rx_ptype_rrobin privat flag is set. The flag is common for all ports, and so can't be just overridden by taprio configuration w/o user involvement. Command fails if pf_p0_rx_ptype_rrobin is already set in the driver. Scheds (commands) configuration depends on interface speed so driver translates the duration to the fetch count based on link speed. Each schedule can be constructed with several command entries in fetch RAM depending on interval. For example if each sched has timer interval < ~130us on 1000 Mb link then each sched consumes one command and have 1:1 mapping. When Ethernet link goes down, driver purge the configuration if link is down for more than 1 second. The patch allows to update the timer and scheds memory only if it's really needed, and skip cases required the user to stop timer by configuring only shceds memory. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
-
Ivan Khoronzhuk authored
TAPRIO/EST offload support in CPSW2G requires EST scheduler function enabled in CPTS. So this patch add a function to set cycle time for EST scheduler. It also add a function for getting time in ns of PHC clock for taprio qdisc configuration. Mostly to verify if timer update is needed or to get actual state of oper/admin schedule. Signed-off-by:
-
- 14 May, 2020 13 commits
-
-
David S. Miller authored
Igor Russkikh says: ==================== net: qed/qede: critical hw error handling FastLinQ devices as a complex systems may observe various hardware level error conditions, both severe and recoverable. Driver is able to detect and report this, but so far it only did trace/dmesg based reporting. Here we implement an extended hw error detection, service task handler captures a dump for the later analysis. I also resubmit a patch from Denis Bolotin on tx timeout handler, addressing David's comment regarding recovery procedure as an extra reaction on this event. v2: Removing the patch with ethtool dump and udev magic. Its quite isolated, I'm working on devlink based logic for this separately. v1: https://patchwork.ozlabs.org/project/netdev/cover/cover.1588758463.git.irusskikh@marvell.com/ ==================== Signed-off-by:
-
Igor Russkikh authored
On some adjacent code, fix bad code formatting Signed-off-by:
Ariel Elior <ariel.elior@marvell.com> Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Igor Russkikh authored
MCP may signal driver about generic critical failure. Driver has to collect mdump information (get_retain), it pushes that to logs and triggers generic notification on "hardware attention" event. Signed-off-by:
-
Igor Russkikh authored
Fan failure is sent by firmware, driver reacts on this error with newly introduced notification path. It will collect dump and shut down the device to prevent physical breakage Signed-off-by:
-
Denis Bolotin authored
Upon tx timeout detection we do disable carrier and print TX queue info on TX timeout. We then raise hw error condition and trigger service task to handle this. This handler will capture extra debug info and then optionally trigger recovery procedure to try restore function. Signed-off-by:
Denis Bolotin <dbolotin@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Igor Russkikh authored
Driver has an ability to initiate a recovery process as a reaction to detected errors. But the codepath (recovery_process) was disabled and never active. Here we add ethtool private flag to allow user have the recovery procedure activated. We still do not enable this by default though, since in some configurations this is not desirable. E.g. this may impact other PFs/VFs. Signed-off-by:
-
Igor Russkikh authored
On different hardware events we have to respond differently, on some of hardware indications hw attention (error condition) should be cleared by the driver to continue normal functioning. Here we introduce attention clear flags, and put them on some important events (in aeu_descs). Signed-off-by:
-
Igor Russkikh authored
Thats probably a legacy code had double declaration of some fields. Cleanup this, removing copy and fixing references. Signed-off-by:
-
Igor Russkikh authored
On various critical errors, notification handler should also report the err information into the management firmware. MFW can interact with server/motherboard backend agents - these are used by server manufacturers to monitor server HW health. Thus, it is important for driver to report on any faulty conditions Signed-off-by:
-
Igor Russkikh authored
In a number of critical places not only debug trace should be printed, but the appropriate hw error condition should be raised and error handling/recovery should start. Introduce our new qed_hw_err_notify invocation in these places to record and indicate critical error conditions in hardware. Signed-off-by:
-
Igor Russkikh authored
qede (ethernet level driver) registers a callback handler. This handler maintains eth dev state flags/bits to track error processing. It implements in place processing part for nonsleeping context (WARN_ON trigger), and a deferred (delayed work) part which triggers recovery process for recoverable errors. In later patches this atomic handler will come with more meat. We introduce err_flags on ethdevice structure, its being used to record error handling properties. Signed-off-by:
-
Igor Russkikh authored
Here we introduce qed device error tracking flags and error types. qed_hw_err_notify is an entrace point to report errors. It'll notify higher level drivers (qede/qedr/etc) to handle and recover the error. List of posible errors comes from hardware interfaces, but could be extended in future. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some cleanups for -next This patchset adds some cleanups for the HNS3 ethernet driver. ==================== Signed-off-by:
-
