Based on viro NE33-seeq8005
	* switched seeq8005 to dynamic allocation
	* seeq8005: embedded ->priv
	* seeq8005: fixed resource leaks on failure exits
	* seeq8005: fixed clobbering on autoprobe
	* seeq8005: fixed jiffies truncation
	* seeq8005: fixed a typo in Kconfig - module is _not_ called ewrk3

Based on viro NE32-at1500
	ROTFL.  The last remnants of CONFIG_AT1500 removed - that was a hell
	of an ancient bug (at1500_probe() was never defined, AFAICS - all
	way back to 0.99.15).

Based on viro NE31-cs89x0
	* switched cs89x0 to dynamic allocation
	* cs89x0: embedded ->priv
	* cs89x0: fixed resource leaks on failure exits
	* cs89x0: fixed clobbering on autoprobe
	* NB: cs89x0 calls request_region() with very odd arguments.  Somebody
	  ought to check WTF is going on there.

Based on viro NE30-at1700
	* switched at1700 to dynamic allocation
	* at1700: embedded ->priv
	* at1700: fixed resource leaks on failure exits
	* at1700: fixed clobbering on autoprobe

Based on viro, NE29-fmv18
	* switched fmv18x to dynamic allocation
	* fmv18x: embedded ->priv
	* fmv18x: fixed resource leaks on failure exits
	* fmv18x: fixed clobbering on autoprobe
	* fmv18x: compile fix - comment is _not_ an empty statement.  The thing
	  had been b0rken since 2.4.3-pre2, BTW...

NE28-eth16i
	* switched eth16i to dynamic allocation
	* eth16i: embedded ->priv
	* eth16i: fixed resource leaks on failure exits

Based on viro NE27-eexpress
	* switched eexpress to dynamic allocation
	* eexpress: embedded ->priv
	* eexpress: fixed clobbering on autoprobe
	* eexpress: fixed IO without request_region()
	* eexpress: fixed resource leaks on failure exits

Patch from viro: NE26-eepro
	* switched eepro to dynamic allocation
	* eepro: embedded ->priv
	* eepro: fixed clobbering on autoprobe
	* eepro: fixed IO before request_region()
	* eepro: fixed resource leaks on failure exits

Convert ewrk3 to dynamic allocation
	* get rid of private device allocation method
	* fix deeply nested function

The new probe code in net-drivers-2.5-exp lost a declaration for the
module case (thanks al).

Fix arlan registration in the net-drivers-2.5-exp repo.
Need to call register_netdev. Found by viro.

Fix auto-probing loop in new probing code for 3c507.
This patch is against net-drivers-2.5-exp repository.
Found by viro.

Convert the SK-NET TMS380 ISA card to the new probe2 format.

Convert proteon token ring driver to new probing.

Convert the SMC tokenring driver to new probing.

Ugh, two patches got crossed. This is the correct first one.

Originally by Al Viro (NE23-82596)
	* switched 82596 to dynamic allocation
	* 82596: fixed resource leaks on failure exits
Updated to apply agains jgarzik/net-drivers-2.5-exp

>From viro NE22-3c501
	* switched 3c501 to dynamic allocation
	* 3c501: embedded ->priv
	* 3c501: fixed clobbering on autoprobe
	* 3c501: fixed resource leaks on failure exits
Additional:
	* probe correctly when no device present
	* fix loop forever bug in probing
	* free_netdev

Original by Al Viro (NE21-wavelan)
	* switched wavelan to dynamic allocation
	* wavelan: embedded ->priv
	* wavelan: fixed clobbering on autoprobe
	* wavelan: fixed IO before request_region()
	* wavelan: fixed resource leaks on failure exits
	* wavelan: fixed order of freeing bugs
Updated to apply agains jgarzik/net-drivers-2.5-exp

Convert arlan driver to new probing.  This meant a rather large
rework of the probing code for this driver since it did a lot ofnon
standard things.

Originally by Al Viro (NE19-3c507)
	* switched 3c507 to dynamic allocation
	* 3c507: embedded ->priv
	* 3c507: fixed clobbering on autoprobe
	* NB: 3c507.c buggers port 0x100 without claiming it.  Most likely it
	  should be doing request_region() there.
Updated to apply agains jgarzik/net-drivers-2.5-exp

from viro NE18-3c505
	* switched 3c505 to dynamic allocation
	* 3c505: embedded ->priv
	* 3c505: fixed use of uninitialized variable
	* 3c505: fixed resource leaks on failure exits
Additional:
	* add free_netdev

from viro NE17-sk16
	* switched sk_g16 to dynamic allocation
	* sk_g16: embedded ->priv
	* sk_g16: fixed buggy check for signature (|| instead of &&, somebody
	  forgot to replace it when inverting the test).
	* sk_g16: fixed use after kfree()
	* sk_g16: fixed init_etherdev() race
Additional:
	* add free_netdev

from viro NE16-ni5010
	* switched ni5010 to dynamic allocation
	* ni5010: embedded ->priv
	* ni5010: fixed clobbering ->irq
	* ni5010: fixed IO before request_region()
Additional:
	* add free_netdev

>From viro NE15-ni52
	* switched ni52 to dynamic allocation
	* ni52: embedded ->priv
	* ni52: fixed clobbering of everything on autoprobe
Additional:
	* add free_netdev

Convert ni65 driver to new probing; patch sequence goes bottom
up on the probe list.

	* switched ni65 to dynamic allocation
	* ni65: fixed ->irq and ->dma clobbering on autoprobe

Rework de620 driver to new dynamic allocation
Originally by Al Viro.
	* switched de620 to dynamic allocation
	* de620: embedded ->priv
	* de620: fixed IO before request_region()

Updated to ~jgarzik/net-drivers-2.5-exp

New infrastructure to allow probing older builtin drivers (like ISA)
Originally by Al Viro, updated to apply agains jgarzik/net-drivers-2.5-exp

The call to dev_get() in wanrouter_device_new_if is racy and redundant and should
be removed.  The later 'register_netdev()' does the same test internally and will
return the appropriate error if the name already exists.

This patch is against 2.6.0-test6.
Resend of earlier patch because it was ignored, or missed.

Compiles ok (with true .o generated, yeah). Please review.

free_netdev() of devices allocated through use of alloc_netdev().
Though baroque, drivers/net/3c515.c now uses alloc_etherdev().


 drivers/net/3c515.c   |   23 ++++++++++++-----------
 drivers/net/defxx.c   |    2 +-
 drivers/net/dummy.c   |    2 +-
 drivers/net/eql.c     |    2 +-
 drivers/net/ns83820.c |    2 +-
 drivers/net/plip.c    |   14 ++++++++++----
 drivers/net/shaper.c  |   11 ++++++++---
 drivers/net/tun.c     |   18 +++++++++---------
 9 files changed, 43 insertions(+), 31 deletions(-)

Resend of LMC driver patch for 2.6.0-test6
  * do proper probing
  * allocate network device with alloc_netdev
  * use standard pci_id's instead of local defines
  * use standard PCI device interface to find and remove devices.

into home.osdl.org:/home/torvalds/v2.5/linux

Spotted by Matteo Croce 

into home.osdl.org:/home/torvalds/v2.5/linux

From Martin Diehl.

From Martin Diehl.

Also, make sir-dev locking compatible with irport.
From Martin Diehl.