- 24 Jan, 2017 40 commits
-
-
Chen Yu authored
The Hi6220's usb controller is limited in that it does not support "Split Transactions", so it does not support communicating with low-speed and full-speed devices behind a high-speed hub. Thus it requires a quirk so that we can manually drop the usb speed when low/full-speed are attached, and bump back to high speed when they are removed. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by:
Chen Yu <chenyu56@huawei.com> [jstultz: Reworked to simplify the patch, and made commit log to be more specific about the issue] Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com>
-
Chen Yu authored
We've seen failures when switching between host and gadget mode, which was diagnosed as being caused due to the bus being auto-suspended when we switched. So this patch forces a port resume when switching to device mode if the bus is suspended. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by:
-
John Stultz authored
When removing a USB-A to USB-otg adapter cable, we get a change status irq, and then in dwc2_conn_id_status_change, we erroneously see the GOTGCTL_CONID_B flag set. This causes us to get stuck in the "while (!dwc2_is_device_mode(hsotg))" loop, spitting out "Waiting for Peripheral Mode, Mode=Host" warnings until it fails out many seconds later. This patch works around the issue by re-reading the GOTGCTL state to check if the GOTGCTL_CONID_B is still set and if not restarting the change status logic. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Reviewed-by:
Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by:
-
John Stultz authored
Basically when plugging in various cables in different orders, I'm occasionally seeing the following BUG splat: [ 86.215403] BUG: scheduling while atomic: kworker/u16:2/53/0x00000002 [ 86.219164] usb 1-1: USB disconnect, device number 9 [ 86.226845] Preemption disabled at:[ 86.230218] [<ffffff8008673558>] dwc2_conn_id_status_change+0x120/0x250 [ 86.236894] CPU: 0 PID: 53 Comm: kworker/u16:2 Tainted: G W 4.9.0-rc8-00051-gd5a7979-dirty #1702 [ 86.246836] Hardware name: HiKey Development Board (DT) [ 86.252100] Workqueue: dwc2 dwc2_conn_id_status_change [ 86.257279] Call trace: [ 86.259771] [<ffffff8008087c28>] dump_backtrace+0x0/0x1a0 [ 86.265210] [<ffffff8008087ddc>] show_stack+0x14/0x20 [ 86.270308] [<ffffff80084343f0>] dump_stack+0x90/0xb0 [ 86.275401] [<ffffff80080d8d94>] __schedule_bug+0x6c/0xb8 [ 86.280841] [<ffffff8008a07220>] __schedule+0x4f8/0x5b0 [ 86.286099] [<ffffff8008a073e8>] schedule+0x38/0xa0 [ 86.291017] [<ffffff8008a0a6cc>] schedule_hrtimeout_range_clock+0x8c/0xf0 [ 86.297846] [<ffffff8008a0a740>] schedule_hrtimeout_range+0x10/0x18 [ 86.304150] [<ffffff8008a0a4a0>] usleep_range+0x50/0x58 [ 86.309418] [<ffffff800866d8dc>] dwc2_wait_for_mode.isra.4+0x54/0xd0 [ 86.315815] [<ffffff800866f058>] dwc2_core_reset+0xe0/0x168 [ 86.321431] [<ffffff800867e364>] dwc2_hsotg_core_init_disconnected+0x2c/0x310 [ 86.328602] [<ffffff8008673568>] dwc2_conn_id_status_change+0x130/0x250 [ 86.335254] [<ffffff80080ccd48>] process_one_work+0x118/0x370 [ 86.341035] [<ffffff80080ccfe8>] worker_thread+0x48/0x498 [ 86.346473] [<ffffff80080d2eb0>] kthread+0xd0/0xe8 [ 86.351299] [<ffffff8008082e80>] ret_from_fork+0x10/0x50 This seems to be caused by the dwc2_wait_for_mode() calling usleep_range() while the hstog->lock spinlock is held, since we take that before calling dwc2_hsotg_core_init_disconnected(). This patch avoids the issue by adding an extra argument to dwc2_core_reset(), as suggested by John Youn, which allows us to skip the waiting, which should be unnecessary when calling from dwc2_hsotg_core_init_disconnected(). Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: -
John Youn authored
Show the value of dr_mode via a debufs file. Signed-off-by:
-
John Youn authored
Remove debugging prints to show params. Signed-off-by:
-
John Youn authored
Show the core params and hardware params. Signed-off-by:
-
John Youn authored
Further reduce the set of parameters set by platforms. Many of them are unnecessary as they should be reported by hardware. They should only need to be overridden if there is a problem. Signed-off-by:
-
John Youn authored
Check these parameters only for true or false. There is no need to check for greater or less than 0. Signed-off-by:
-
John Youn authored
Remove the platform-specific static param structs and set only those params that are necessary for each platform. Signed-off-by:
-
John Youn authored
Check that core parameters have valid values and adjust them if they aren't. Signed-off-by:
-
John Youn authored
Group the members by global, host, and gadget params. Formatting and organizational change only. Signed-off-by:
-
John Youn authored
Update the param types to appropriately sized ints and bools. Signed-off-by:
-
John Youn authored
After setting the default core parameter values, read in the device properties and modify core parameter values if needed. Signed-off-by:
-
John Youn authored
Initialize the core parameters to their default, auto-detected values. Remove all the previous dwc2_set_param* methods. Most of what this code is doing is handling defaults for "not set" values and other trivial checks. The checking can be simplified and will be done in a later commit. This allows us to change only those parameters that won't work with default settings. It also allows us to use non-int parameters. Signed-off-by:
-
John Youn authored
The otg_ver parameter only controls the SRP pulsing method and defaults to the 1.3 behavior. It is unused and can be removed. Signed-off-by:
-
Krzysztof Opasiak authored
Since commit: ba1582f2 ("usb: gadget: f_hid: use alloc_ep_req()") we cannot allocate any requests in bind() as we check if we should align request buffer based on endpoint descriptor which is assigned in set_alt(). Allocating request in bind() function causes a NULL pointer dereference. This commit moves allocation of IN request from bind() to set_alt() to prevent this issue. Fixes: ba1582f2 ("usb: gadget: f_hid: use alloc_ep_req()") Cc: stable@vger.kernel.org Tested-by:
David Lechner <david@lechnology.com> Signed-off-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by:
-
Bhumika Goyal authored
Declare usb_ep_ops structures as const as they are only stored in the ops field of an usb_ep structure. This field is of type const, so usb_ep_ops structures having this property can be made const too. Done using Coccinelle( A smaller version of the script) @r disable optional_qualifier@ identifier i; position p; @@ static struct usb_ep_ops i@p={...}; @ok@ identifier r.i; position p; struct mv_ep a; struct mv_u3d_ep b; struct omap_ep c; @@ ( a.ep.ops=&i@p; | b.ep.ops=&i@p; | c.ep.ops=&i@p; ) @bad@ position p!={r.p,ok.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ +const struct usb_ep_ops i; File size details before and after applying the patch. First line of every .o file shows the file size before patching and second line shows the file size after patching. text data bss dec hex filename 7782 384 8 8174 1fee usb/gadget/udc/fotg210-udc.o 7878 296 8 8182 1ff6 usb/gadget/udc/fotg210-udc.o 17866 992 40 18898 49d2 usb/gadget/udc/fsl_udc_core.o 17954 896 40 18890 49ca usb/gadget/udc/fsl_udc_core.o 9646 288 8 9942 26d6 usb/gadget/udc/fusb300_udc.o 9742 192 8 9942 26d6 usb/gadget/udc/fusb300_udc.o 12752 416 8 13176 3378 drivers/usb/gadget/udc/goku_udc.o 12832 328 8 13168 3370 drivers/usb/gadget/udc/goku_udc.o 16541 1696 8 18245 4745 drivers/usb/gadget/udc/gr_udc.o 16637 1600 8 18245 4745 drivers/usb/gadget/udc/gr_udc.o 15798 288 16 16102 3ee6 drivers/usb/gadget/udc/m66592-udc.o 15894 192 16 16102 3ee6 drivers/usb/gadget/udc/m66592-udc.o 17751 3808 16 21575 5447 usb/gadget/udc/mv_u3d_core.o 17839 3712 16 21567 543f usb/gadget/udc/mv_u3d_core.o 17348 1112 24 18484 4834 usb/gadget/udc/mv_udc_core.o 17436 1016 24 18476 482c usb/gadget/udc/mv_udc_core.o 25990 2620 13 28623 6fcf drivers/usb/gadget/udc/net2272.o 26086 2524 13 28623 6fcf drivers/usb/gadget/udc/net2272.o 18409 7312 8 25729 6481 drivers/usb/gadget/udc/pxa27x_udc.o 18505 7208 8 25721 6479 drivers/usb/gadget/udc/pxa27x_udc.o 18644 288 16 18948 4a04 usb/gadget/udc/r8a66597-udc.o 18740 192 16 18948 4a04 usb/gadget/udc/r8a66597-udc.o Files: drivers/usb/gadget/udc/{s3c-hsudc.o/omap_udc.o/fsl_qe_udc.o} did not complie. Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Cristian Birsan authored
This patch updates the usb endpoint allocation scheme for atmel usba driver to make sure all endpoints are allocated in order. This requirement comes from the datasheet of the controller. The allocation scheme is decided by fifo_mode parameter. For fifo_mode = 0 the driver tries to autoconfigure the endpoints fifo size. All other modes contain fixed configurations optimized for different purposes. The idea is somehow similar with the approach used on musb driver. Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by:
-
Vincent Pelletier authored
It is allowed by the USB specification to enabled same-address, opposite- direction endpoints simultaneously, which means 30 non-zero endpoints are allowed. So double eps_addrmap length to 30. The original code only accepted 14 descriptors out of a likely intended 15 (as there are 15 endpoint addresses, ignoring direction), because the first eps_addrmap entry is unused (it is a placeholder for endpoint zero). So increase eps_addrmap length by one to 31. Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by:
-
Vincent Pelletier authored
Endpoint descriptors come in 2 sizes, struct usb_endpoint_descriptor being the largest. Use bLength to stop on endpoint descriptor boundary, and not 2 bytes too far. Signed-off-by:
-
Baolin Wang authored
Since the set_power callback did not do anything for power setting, then remove it. Signed-off-by:
Baolin Wang <baolin.wang@linaro.org> Signed-off-by:
-
Baolin Wang authored
Since it will not set the PMIC current drawn from USB configuration by set_power callback, then remove it. Signed-off-by:
-
Baolin Wang authored
There are no users will use the vbus_draw variable set by set_power() callback to set the vbus current. Thus we can remove it. Signed-off-by:
-
Sevak Arakelyan authored
Add programming of GDFIFOCFG register in device mode. It must contain start address for EP Info block and total FIFO depth. Signed-off-by:
Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by:
-
Peter Chen authored
There are only two requests for uac2, it may not be enough at high loading system which usb interrupt handler can't be serviced on time, then the data will be lost since it is isoc transfer for audio. In this patch, we introduce a parameter for the number for usb request, and the user can override it if current number for request is not enough for his/her use case. Besides, update this parameter for legacy audio gadget and documentation. Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
John Youn authored
Take the sizeof '*req' instead of 'struct dwc2_hsotg_req'. Signed-off-by:
-
John Youn authored
The function returns void so a return is unnecessary. Signed-off-by:
-
John Youn authored
The indent should be only one tab. Signed-off-by:
-
John Youn authored
Fix lines over 80 characters. Signed-off-by:
-
John Youn authored
* Remove braces for one-line statements * Add missing braces where another arm in if-statement uses braces Signed-off-by:
-
John Youn authored
Fix the formatting of logical statements to end the line with the logical operator. Signed-off-by:
-
John Youn authored
Fix misaligned and over 80-character comments. Signed-off-by:
-
John Youn authored
Fixes checkpatch warning: WARNING: function definition argument 'struct dwc2_hsotg *' should also have an identifier name Signed-off-by:
-
John Youn authored
This commmit is the result of running checkpatch --fix. The results were verified for correctness. Some of the fixes result in line over 80 char which we will fix manually later. The following is a summary of what was done by checkpatch: * Remove externs on function prototypes. * Replace symbolic permissions with octal. * Align code to open parens. * Replace 'unsigned' with 'unsigned int'. * Remove unneccessary blank lines. * Add blank lines after declarations. * Add spaces around operators. * Remove unnecessary spaces after casts. * Replace 'x == NULL' with '!x'. * Replace kzalloc() with kcalloc(). * Concatenate multi-line strings. * Use the BIT() macro. Signed-off-by:
-
Krzysztof Opasiak authored
As IN request has to be allocated in set_alt() and released in disable() we cannot use mutex to protect it as we cannot sleep in those funcitons. Let's replace this mutex with a spinlock. Cc: stable@vger.kernel.org Tested-by:
-
Krzysztof Opasiak authored
When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory. To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Cc: stable@vger.kernel.org Tested-by:
-
Krzysztof Opasiak authored
Requests for out endpoint are allocated in bind() function but never released. This commit ensures that all pending requests are released when we disable out endpoint. Fixes: 99c51500 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Cc: stable@vger.kernel.org Tested-by:
-
Felipe Balbi authored
Without SS descriptors, we have no possibility of running on SS controllers such as DWC3. Signed-off-by: -
Felipe Balbi authored
_BSD_SOURCE is deprecated and gives a build warning. Let's use _DEFAULT_SOURCE instead. Signed-off-by:
-
