- 20 Oct, 2021 5 commits
-
-
Imre Deak authored
If the DPCD sink rate values read from the sink are invalid, the driver will sanitize this in intel_dp_set_common_rates(), by setting a default 162000 link rate in common rates and printing a WARN(). WARN()s should only be triggered by bugs in the code and not by external factors like the above (an invalid DPCD injected maliciously or read from a buggy monitor). So fixup the invalid DPCD sink rate values already and print an error in this case (since it's still a user visible problem). Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211018094154.1407705-6-imre.deak@intel.com
-
Imre Deak authored
Print an error if the DPCD sink max lane count is invalid and fix it up. While at it also add an assert that the link max lane count (derived from intel_dp_max_common_lane_count(), potentially reduced by the LT fallback logic) value is also valid. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Atm until the DPCD for a connector is read the max link rate and lane count params are invalid. If the connector is modeset, in intel_dp_compute_config(), intel_dp_common_len_rate_limit(max_link_rate) will return 0, leading to a intel_dp->common_rates[-1] access. Fix the above by making sure the max link params are always valid. The above access leads to an undefined behaviour by definition, though not causing a user visible problem to my best knowledge, see the previous patch why. Nevertheless it is an undefined behaviour and it triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Imre Deak authored
Atm, there are no sink rate values set for DP (vs. eDP) sinks until the DPCD capabilities are successfully read from the sink. During this time intel_dp->num_common_rates is 0 which can lead to a intel_dp->common_rates[-1] (*) access, which is an undefined behaviour, in the following cases: - In intel_dp_sync_state(), if the encoder is enabled without a sink connected to the encoder's connector (BIOS enabled a monitor, but the user unplugged the monitor until the driver loaded). - In intel_dp_sync_state() if the encoder is enabled with a sink connected, but for some reason the DPCD read has failed. - In intel_dp_compute_link_config() if modesetting a connector without a sink connected on it. - In intel_dp_compute_link_config() if modesetting a connector with a a sink connected on it, but before probing the connector first. To avoid the (*) access in all the above cases, make sure that the sink rate table - and hence the common rate table - is always valid, by setting a default minimum sink rate when registering the connector before anything could use it. I also considered setting all the DP link rates by default, so that modesetting with higher resolution modes also succeeds in the last two cases above. However in case a sink is not connected that would stop working after the first modeset, due to the LT fallback logic. So this would need more work, beyond the scope of this fix. As I mentioned in the previous patch, I don't think the issue this patch fixes is user visible, however it is an undefined behaviour by definition and triggers a BUG() in CONFIG_UBSAN builds, hence CC:stable. v2: Clear the default sink rates, before initializing these for eDP. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4297 References: https://gitlab.freedesktop.org/drm/intel/-/issues/4298Suggested-by:
-
Imre Deak authored
Reading out the DP encoders' DPCD during booting or resume is only required for enabled encoders: such encoders may be modesetted during the initial commit and the link training this involves depends on an initialized DPCD. For DDI encoders reading out the DPCD is skipped, do the same on pre-DDI platforms. Atm, the first DPCD readout without a sink connected - which is a likely scneario if the encoder is disabled - leaves intel_dp->num_common_rates at 0, which resulted in intel_dp_sync_state()->intel_dp_max_common_rate() in a intel_dp->common_rates[-1] access. This by definition results in an undefined behaviour, though to my best knowledge in all HW/compiler configurations it actually results in accessing the array item type value preceding the array. In this case the preceding value happens to be intel_dp->num_common_rates, which is 0, so this issue - by luck - didn't cause a user visible problem. Nevertheless it's still an undefined behaviour and in CONFIG_UBSAN builds leads to a kernel BUG() (which revealed this problem for us), hence CC:stable. A related problem in case the encoder is enabled but the sink is not connected or the DPCD readout fails is fixed by the next patch. v2: Amend the commit message describing the root cause of the CONFIG_UBSAN BUG(). Fixes: a532cde3 ("drm/i915/tc: Fix TypeC port init/resume time sanitization") References: https://gitlab.freedesktop.org/drm/intel/-/issues/4297Reported-and-tested-by:Mat Jonczyk <mat.jonczyk@o2.pl> Cc: Mat Jonczyk <mat.jonczyk@o2.pl> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 19 Oct, 2021 13 commits
-
-
Jani Nikula authored
Use the new link training delay helpers, fixing the delays for 128b/132b. For existing 8b/10b functionality, this will cause additional 1-byte DPCD reads for LTTPR delays instead of using the cached values. It's just too complicated to combine generic helpers with local caching in a sensible way. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Merge tag 'topic/drm-dp-training-delay-helpers-2021-10-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next Core Changes: - drm dp helpers for figuring out link training delays Merge to drm-intel-next as well after c93ce6a6 ("Merge tag 'topic/drm-dp-training-delay-helpers-2021-10-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next"). Signed-off-by:
-
Jani Nikula authored
Reuse the 8b/10b link training delay helpers. Functionally this skips the check for invalid values for DPCD 1.4 and later at clock recovery delay (as it's a fixed delay and bypasses the rd_interval) but the same value will be checked and invalid values reported at channel equalization. Reviewed-by:
-
Jani Nikula authored
The link training delays are different and/or available in different DPCD offsets depending on: - Clock recovery vs. channel equalization - DPRX vs. LTTPR - 128b/132b vs. 8b/10b - DPCD 1.4+ vs. earlier Add helpers to get the correct delays in us, reading DPCD if necessary. This is more straightforward than trying to retrofit the existing helpers to take 128b/132b into account. Having to pass in the DPCD receiver cap field seems unavoidable, because reading it involves checking the revision and reading extended receiver cap. So unfortunately the interface is mixed cached and read as needed. v2: Remove delay_us < 0 check and the whole local var (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
Let's add lpt_pch_disable() as the counterpart to lpt_pch_enable(). Note that unlike the ilk+ code the fdi_link_train() and fdi_disable() calls are still left directly in intel_crt.c. If we wanted to move those we'd need to add lpt_pch_pre_enable(). But the two fdi direct fdi calls are pretry symmetric so it doesn't seem too bad to just keep them as is. v2: Make lpt_disable_pch_transcoder() static (lkp@intel.com) Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Ville Syrjälä authored
Reanme intel_ddi_fdi_post_disable() to hsw_fdi_disable() and relocate it next to all the other code dealing with FDI_RX. intel_ddi.c has now been cleansed of FDI_RX. In order to avoid exposing intel_disable_ddi_buf() outside intel_ddi.c we can just open code the DDI_BUF_CTL write. The enable side already has all that stuff open coded so this actually is more symmetric. But we do need to remeber to bring the intel_wait_ddi_buf_idle() call over from inside intel_disable_ddi_buf(). Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Hoover the remaining open coded PCH modeset sequence bits out from ilk_crtc_disable(). Somewhat annoyingly the enable vs. disable is a bit asymmetric so we need two functions for the disable case. Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Move the lpt_get_iclkip() call from hsw_crt_get_config() since that's where we have the lpt_program_iclkip() call as well. Tehcnically this isn't perhaps quite right since iCLKIP is providing the CRT dotclock. So one can argue all of it should be directly in intel_crt.c. But since the CRT port is the only one on the PCH sticking it all into the PCH code seems OK. Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Pull the ilk+ PCH state readout into its own function and relocate to the appropriate file. The clock readout parts are perhaps a bit iffy since we depend on the gmch DPLL readout code. But we can think about the clock readout big picture later. Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Nuke the hsw_get_ddi_port_state() eyesore by putting the readout code into intel_pch_display.c, and calling it directly from hsw_crt_get_config(). Note that the nuked TRANS_DDI_FUNC_CTL readout from hsw_get_ddi_port_state() is now etirely redundant since we get called from the encoder->get_config() so we already know we're dealing with the correct DDI port. Previously the code was called from a place where that wasn't known so it had to checked manually. v2: Clarify the TRANS_DDI_FUNC_CTL change (Dave) Nuke the now unused *TRANS_DDI_FUNC_CTL_VAL_TO_PORT() (Dave) Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Ville Syrjälä authored
Use the clean "atomic_state+crtc" approach of passing arguments to the top level PCH modeset code. And while at it we can also just pass the whole crtc to ilk_disable_pch_transcoder(). v2: Elimiate double space between function args (Dave) Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Start moving the code for PCH modeset sequence/etc. to its own file. Still not sure about the file name though... Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
Move the PCH refclk stuff (including all the LPT/WPT iCLKIP/CLKOUT_DP things) to its own file. We also suck in the mPHY programming from intel_fdi.c since we're the only caller. Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 18 Oct, 2021 7 commits
-
-
Rodrigo Vivi authored
There's no such thing as gen13. It is either display 13 or graphics 13. Don't propagate the gen12 confusion further. Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
We should stop using the gen name and the "+" to reference the newer platforms. And on this case specifically we can simplify the debug message even further. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Ville Syrjälä authored
intel_load_plane_csc_black() is specific to icl+ so deserves a name reflecting that fact. Also rename the variables to standard form so I won't get confused reading the code. v2: icl+ not glk+ Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Juston Li <juston.li@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:
Juston Li <juston.li@intel.com>
-
Ville Syrjälä authored
We are inside the vblank evade critical section here, racing against the raster beam. There is no time to print debug messages. Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Juston Li <juston.li@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
There's lots of expensive stuff inserted between the PLANE_CTL and PLANE_SURF writes even though the comment before the PLANE_CTL write says not to put stuff there. Move it all to a more apporiate place. There's also a weird PLANE_COLOR_CTL RMW in there. I guess because force_black was computed way too late originally, but that is now sorted. Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Juston Li <juston.li@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by:
-
Ville Syrjälä authored
No real reason to have this pxp state computation in intel_atomic_check_planes(). Just stuff it into skl_plane_check(). There was also some funny state copying being done from the old plane state to the new plane state when the plane is anyway disabled. The one thing we presumably must remember to do is copy over the decrypt state when assigning a Y plane for planar YCbCr scanout, so that the Y plane's PLANE_SURF will get the appropriate bit set. The force_black thing should not matter as I'm pretty sure all that stuff is ignored for the Y plane. I suppose this was the reason for the odd placement for the state computation, but I see no reason to deviate from the standard way of doing these things. This also guarantees that we don't calculate things differently between the linked UV and Y plane. v2: Only do stuff for icl+ since 'force_black' depends on the plane CSC which is an icl+ feature Cc: Anshuman Gupta <anshuman.gupta@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Juston Li <juston.li@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Signed-off-by: -
Nathan Chancellor authored
A new warning in clang points out a place in this file where a bitwise OR is being used with boolean types: drivers/gpu/drm/i915/intel_pm.c:3066:12: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] changed = ilk_increase_wm_latency(dev_priv, dev_priv->wm.pri_latency, 12) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This construct is intentional, as it allows every one of the calls to ilk_increase_wm_latency() to occur (instead of short circuiting with logical OR) while still caring about the result of each call. To make this clearer to the compiler, use the '|=' operator to assign the result of each ilk_increase_wm_latency() call to changed, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Link: https://github.com/ClangBuiltLinux/linux/issues/1473Reported-by:Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Suggested-by:
Dávid Bolvanský <david.bolvansky@gmail.com> Reviewed-by:
-
- 15 Oct, 2021 2 commits
-
-
Rodrigo Vivi authored
During the review I focused on stop the using of the "+" to reference the newer platforms, but I forgot that we are in a process of making things more clear and differentiate graphics and display versions. So, let me to clean up this a bit. Also, we don't need any version mentioned in the config menu entry, only in the help. Cc: Alan Previn <alan.previn.teres.alexis@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211015090916.82968-1-rodrigo.vivi@intel.com
-
Matt Roper authored
The I915_TILING_* values in our uapi header are intended solely for use with the old get_tiling/set_tiling ioctls that operate on hardware de-tiling fences; all other uapi communication about tiling types is done via framebuffer modifiers rather than with these old values. On newer Intel platforms detiling fences no longer exist so the old get_tiling/set_tiling ioctls are no longer usable and will always return -EOPNOTSUPP. This means there's no reason to add new tiling types (such as the Tile4 format introduced by Xe_HP) to the uapi header here. Any kernel-internal code that needs to represent tiling format should either rely on framebuffer modifiers (as the display code does) or use some kind of non-uapi enum (as the GEM blt selftest now does). References: https://patchwork.freedesktop.org/patch/456656/?series=95308 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Caz Yokoyama <caz.yokoyama@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211012221245.2609670-1-matthew.d.roper@intel.com
-
- 14 Oct, 2021 12 commits
-
-
Ville Syrjälä authored
We don't have hpd support on i8xx/i915 which means hotplug_funcs==NULL. Let's not oops when loading the driver on one those machines. v2: Drop the redundant function pointer check (Jani) Cc: Dave Airlie <airlied@redhat.com> Cc: Jani Nikula <jani.nikula@intel.com> Fixes: cd030c7c ("drm/i915: constify hotplug function vtable.") Signed-off-by:
-
José Roberto de Souza authored
This memory frequency calculated is only used to check if it is zero, what is not useful as it will never actually be zero. Also the calculation is wrong, we should be checking other bit to select the appropriate frequency multiplier while this code is stuck with a fixed multiplier. So here dropping it as whole. v2: - Also remove memory frequency calculation for gen9 LP platforms Cc: Yakui Zhao <yakui.zhao@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Fixes: 5d0c938e ("drm/i915/gen11+: Only load DRAM information from pcode") Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Add the FOO_LN() register macros for all the icl combo phy registers. Also get rid of the semi-pointless FOO_LN0() variants and just use the parametrized version. Signed-off-by:
-
Ville Syrjälä authored
Pull the convoluted loadgen calculation into a small helper. Signed-off-by:
-
Ville Syrjälä authored
DKL_TX_LOADGEN_SHARING_PMD_DISABLE doesn't even seem to exist, also the spec says to skip all loadgen stuff. The code was dead anyway since it wasn't actually writing the value anywhere. Signed-off-by:
-
Ville Syrjälä authored
Use <4 instead of <=3 as the terminating condition for the loops over the 4 lanes. Signed-off-by:
-
Ville Syrjälä authored
All the values we have in {icl_mg,tgl_dkl}_phy_ddi_buf_trans fit into u8. Shrink the types accordingly. Signed-off-by: -
Ville Syrjälä authored
The struct itself already has sufficient namespace. No need to duplicate it in the members. Signed-off-by:
-
Jani Nikula authored
Now that intel_sideband.[ch] has been decluttered, it's pure lpt/wpt iosf sideband. Let's call it intel_sbi, following the function naming. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Jani Nikula authored
The snb+ pcode mailbox code is not sideband, so split it out to a separate file. As can be seen from the #include changes, very few places use both sideband and pcode. Code movement only. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
For the time being, neither the power sequencer nor the backlight code properly support two eDP panels simultaneously. While the software states will be independent, the same sets of registers will be used for both eDP panels, clobbering the hardware state and leading to errors. Gracefully disable dual eDP until proper support has been added. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Swati Sharma <swati2.sharma@intel.com> Reviewed-by:
Swati Sharma <swati2.sharma@intel.com> Signed-off-by:
-
Jani Nikula authored
The VLV/CHV sideband code is pretty distinct from the rest of the sideband code. Split it out to new vlv_sideband.[ch]. Pure code movement with relevant #include changes, and a tiny checkpatch fix on top. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
-
- 12 Oct, 2021 1 commit
-
-
Lucas De Marchi authored
Nothing from intel-mid.h and this is only available on x86, so remove it as we prepare support for other architectures. Signed-off-by:
-
