- 18 Dec, 2012 40 commits
-
-
Afzal Mohammed authored
OMAP RTC IP can have kicker feature. This prevents spurious writes to register. To write to registers kicker lock has to be released. Procedure to do it as follows, 1. write to kick0 register, 0x83e70b13 2. write to kick1 register, 0x95a4f1e0 Writing value other than 0x83e70b13 to kick0 enables write locking, more details about kicker mechanism can be found in section 20.3.3.5.3 of AM335X TRM @www.ti.com/am335x Here id table information is added and is used to distinguish those that require kicker handling and the ones that doesn't need it. There are more features in the newer IP's compared to legacy ones other than kicker, which driver currently doesn't handle, supporting additional features would be easier with the addition of id table. Older IP (of OMAP1) doesn't have revision register as per TRM, so revision register can't be relied always to find features, hence id table is being used. While at it, replace __raw_writeb/__raw_readb with writeb/readb; this driver is used on ARMv7 (AM335X SoC) Signed-off-by:
Afzal Mohammed <afzal@ti.com> Acked-by:
Sekhar Nori <nsekhar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Daniel Mack <zonque@gmail.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alan Cox authored
If elf_core_dump() is called and fill_note_info() fails in the kmalloc() then it returns 0 but has not yet initialised all the needed fields. As a result we do a kfree(randomness) after correctly skipping the thread data. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Joe Perches authored
Store the camelcase variables in a hash and only emit a warning on the first use of each new variable. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Joe Perches authored
Even though the kernel doesn't support using floating point constants, add a regex for them. Support forms like: 0x123p1, 123e-1, 1.23, 1.5e23f Signed-off-by:
-
Joe Perches authored
Hexadecimal values are current found in 2 parts. A hex constant like 0x123456abcdef is found as 0 and then x123456abcdef and later coalesced. Instead, reverse the order of the 2 searches in $Constant to find 0x first, then 0 so that the entire hex constant is found all at once. Signed-off-by:
-
Joe Perches authored
switch default case is sometimes written as "default:;". This can cause new cases added below the default to be defective. Suggest adding a break; after empty default cases to avoid fallthrough defects. Fixed indentation in the other semicolon test above it. Suggested-by:
Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Joe Perches authored
spinlock_t should always be used. Signed-off-by:
"Luis R. Rodriguez" <mcgrof@do-not-panic.com> Signed-off-by:
-
Joe Perches authored
Blank lines around braces are not unnecessary. Emit a message on the use of these blank lines only when using --strict. int foo(int bar) { something or other.... } is generally written in the kernel as: int foo(int bar) { something or other... } Signed-off-by: -
Joe Perches authored
Preprocessor directives and asm statements should be allowed to have a line continuation. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Joe Perches authored
Some projects might want a longer line length so allow a command line --max-line-length=n control over the long line warnings. The default line length is 80. Signed-off-by:
-
Andy Whitcroft authored
Consolidate the if (foo) bar(foo) detectors into a single check. Add debugfs_remove and family. Based on a patch by Constantine Shulyupin. Signed-off-by:
Andy Whitcroft <apw@canonical.com> Cc: Constantine Shulyupin <const@MakeLinux.com>. Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Tao Ma authored
In commit 9c0ece06 ("Get rid of Documentation/feature-removal.txt"), Linus removes feature-removal-schedule.txt from Documentation, but there is still some reference to this file. So remove them. Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Acked-by:
-
Kees Cook authored
This config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, it is being removed. This will discourage future addition of CONFIG_EXPERIMENTAL while it is being phased out. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
When the previous line is not a line continuation and the current line has a line continuation but is not a #define, emit a warning. Signed-off-by:
-
Catalin Marinas authored
This function is used by sparc, powerpc tile and arm64 for compat support. The patch adds a generic implementation with a wrapper for PowerPC to do the u32->int sign extension. The reason for a single patch covering powerpc, tile, sparc and arm64 is to keep it bisectable, otherwise kernel building may fail with mismatched function declarations. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Cong Ding authored
Fix this warning: lib/rbtree_test.c: In function `check': lib/rbtree_test.c:121: warning: `blacks' may be used uninitialized in this function Signed-off-by:
Cong Ding <dinggnu@gmail.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by:
-
Oleg Nesterov authored
Currently only block_dev and uprobes use percpu_rw_semaphore, add the config option selected by BLOCK || UPROBES. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Anton Arapov <anton@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
-
Oleg Nesterov authored
Add lockdep annotations. Not only this can help to find the potential problems, we do not want the false warnings if, say, the task takes two different percpu_rw_semaphore's for reading. IOW, at least ->rw_sem should not use a single class. This patch exposes this internal lock to lockdep so that it represents the whole percpu_rw_semaphore. This way we do not need to add another "fake" ->lockdep_map and lock_class_key. More importantly, this also makes the output from lockdep much more understandable if it finds the problem. In short, with this patch from lockdep pov percpu_down_read() and percpu_up_read() acquire/release ->rw_sem for reading, this matches the actual semantics. This abuses __up_read() but I hope this is fine and in fact I'd like to have down_read_no_lockdep() as well, percpu_down_read_recursive_readers() will need it. Signed-off-by:
-
Oleg Nesterov authored
percpu_rw_semaphore->writer_mutex was only added to simplify the initial rewrite, the only thing it protects is clear_fast_ctr() which otherwise could be called by multiple writers. ->rw_sem is enough to serialize the writers. Kill this mutex and add "atomic_t write_ctr" instead. The writers increment/decrement this counter, the readers check it is zero instead of mutex_is_locked(). Move atomic_add(clear_fast_ctr(), slow_read_ctr) under down_write() to avoid the race with other writers. This is a bit sub-optimal, only the first writer needs this and we do not need to exclude the readers at this stage. But this is simple, we do not want another internal lock until we add more features. And this speeds up the write-contended case. Before this patch the racing writers sleep in synchronize_sched_expedited() sequentially, with this patch multiple synchronize_sched_expedited's can "overlap" with each other. Note: we can do more optimizations, this is only the first step. Signed-off-by:
-
Oleg Nesterov authored
Currently the writer does msleep() plus synchronize_sched() 3 times to acquire/release the semaphore, and during this time the readers are blocked completely. Even if the "write" section was not actually started or if it was already finished. With this patch down_write/up_write does synchronize_sched() twice and down_read/up_read are still possible during this time, just they use the slow path. percpu_down_write() first forces the readers to use rw_semaphore and increment the "slow" counter to take the lock for reading, then it takes that rw_semaphore for writing and blocks the readers. Also. With this patch the code relies on the documented behaviour of synchronize_sched(), it doesn't try to pair synchronize_sched() with barrier. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Jan Beulich authored
This is another step towards better standard conformance. Rather than adding a local buffer to store the specified portion of the string (with the need to enforce an arbitrary maximum supported width to limit the buffer size), do a maximum width conversion and then drop as much of it as is necessary to meet the caller's request. Also fail on negative field widths. Uses the deprecated simple_strto*() functions because kstrtoXX() fail on non-zero terminated strings. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
[yongjun_wei@trendmicro.com.cn: remove duplicated include] Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Andy Shevchenko authored
Remove the custom implementation of the functionality similar to kbasename(). Signed-off-by:
-
Andy Shevchenko authored
There are several places in the kernel that use functionality like basename(3) with the exception: in case of '/foo/bar/' we expect to get an empty string. Let's do it common helper for them. Signed-off-by:
-
Kim, Milo authored
Signed-off-by:
Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Marko Katic authored
Changing backlight intensity on an Akita (Sharp Zaurus C-1000) triggers WARN_ON message: WARNING: at drivers/gpio/gpiolib.c:1672 __gpio_set_value+0x38/0xa4() Modules linked in: Backtrace: corgi_bl_set_intensity+0x0/0x74 corgi_bl_update_status+0x0/0x64 corgi_lcd_probe+0x0/0x258 spi_drv_probe+0x0/0x24 driver_probe_device+0x0/0x208 __driver_attach+0x0/0x94 bus_for_each_dev+0x0/0x90 driver_attach+0x0/0x28 bus_add_driver+0x0/0x22c driver_register+0x0/0x134 spi_register_driver+0x0/0x60 corgi_lcd_driver_init+0x0/0x1c do_one_initcall+0x0/0x174 kernel_init+0x0/0x2a8 Akita machines have backlight controls hooked to a gpio expander chip, max7310 using i2c transfers which can sleep. In this case, pca953x_gpio_set_value() can be called to control gpio, and pca953x_setup_gpio() sets can_sleep flag. Therefore, gpio_set_value_cansleep() should be used in order to avoid WARN_ON on akita machines. Akita is the only exception in this case since other users of corgi_lcd access backlight gpio controls through a different gpio expander which does not set the can_sleep flag. Signed-off-by:Marko Katic <dromede@gmail.com> Signed-off-by:
-
Jingoo Han authored
GPIOF_DIR_OUT and GPIOF_DIR_IN are defined as below: GPIOF_DIR_OUT (0 << 0) GPIOF_DIR_IN (1 << 0) So, when !pdata->reset_inverted is 1, the gpio pin can be set as input, instead of output. To prevent this problem, GPIOF_INIT flag should be used when using devm_gpio_request_one(). Signed-off-by:
-
Jingoo Han authored
Previously, when ops functions cannot be called, lcd_show_contrast() and lcd_store_contrast() returned 0, instead of ENXIO. Thus, in this case, a local variable 'rc' for return value should be initialized as ENXIO, after kstrtoul() is called. Signed-off-by:
-
Jingoo Han authored
Remove an unnecessary line continuation in pm860x_backlight_probe(). Also, a checkpatch warning is fixed as below: WARNING: Avoid unnecessary line continuations [akpm@linux-foundation.org: remove newline] Signed-off-by:
-
Peter Ujfalusi authored
TWL_MODULE_PWM is defined as: #define TWL_MODULE_PWM TWL4030_MODULE_PWM0 Use the common module ID define here which will facilitate the upcoming twl-core cleanup. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
-
Thierry Reding authored
This function finds the struct backlight_device for a given device tree node. A dummy function is provided so that it safely compiles out if OF support is disabled. [akpm@linux-foundation.org: Don't use IS_ENABLED(CONFIG_OF)] Signed-off-by:
Thierry Reding <thierry.reding@avionic-design.de> Acked-by:
-
Axel Lin authored
We don't need the sysfs file to be world writable or group writable. This file is write-only, change it to S_IWUSR (0200). Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
"G.Shark Jeong" <gshark.jeong@gmail.com> Signed-off-by:
-
Jingoo Han authored
devm_kfree() allocates memory that is released when a driver detaches. Thus, there is no reason to explicitly call devm_kfree in probe or remove functions. Signed-off-by:
-
Jingoo Han authored
devm_kfree() allocates memory that is released when a driver detaches. Thus, there is no reason to explicitly call devm_kfree() in probe or remove functions. Signed-off-by:
-
Jingoo Han authored
Remove unnecessary cast of void pointer for platform data in probe function. Signed-off-by:
-
Jingoo Han authored
Add 'const' to static array that was missing it in its definition. Also, 'const' is added to ili9320_write_regs(), because it is called by vgg2432a4 driver. Signed-off-by:
-
Jingoo Han authored
Add 'const' to static array that was missing it in its definition. Signed-off-by:
-
