- 13 Jan, 2023 2 commits
-
-
Cai Huoqing authored
Commit 399516ab ("MAINTAINERS: Add a bunch of legacy (UMS) DRM drivers") marked i810 driver obsolete 7 years ago. And the mesa UMD of this drm driver already in deprecated list in the link: https://docs.mesa3d.org/systems.html Intel i810-->driver/gpu/drm/i810 It's time to remove this driver. Signed-off-by:
Cai Huoqing <cai.huoqing@linux.dev> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
Dave Airlie <airlied@redhat.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
Remove nouveau's support for legacy contexts and buffers. It was required by libdrm earlier than 2.4.33, released in March 2012. A previous attempt in 2013 to remove the functionality [1] had to be reverted [2] as there were still users left. Libdrm 2.4.33 is now almost 11 years old and it is time for userspace to move on. With the nouveau code gone, we can also remove the driver-feature bit DRIVER_KMS_LEGACY_CONTEXT. Signed-off-by:
Karol Herbst <kherbst@redhat.com> Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7c510133d93dd6f15ca040733ba7b2891ed61fd1 # 1 Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c21eb21cb50d58e7cbdcb8b9e7ff68b85cfa5095 # 2 Link: https://patchwork.freedesktop.org/patch/msgid/20230112133858.17087-1-tzimmermann@suse.de
-
- 12 Jan, 2023 1 commit
-
-
Maíra Canal authored
With commit 359c6649 ("drm/gem: Implement shadow-plane {begin, end}_fb_access with vmap"), the behavior of the shadow-plane helpers changed and the vunmap is now performed at the end of the current pageflip, instead of the end of the following pageflip. By performing the vunmap at the end of the current pageflip, invalid memory is accessed by the vkms during the plane composition, as the data is being unmapped before being used, as reported by the following warning: [ 275.866047] BUG: unable to handle page fault for address: ffffb382814e8002 [ 275.866055] #PF: supervisor read access in kernel mode [ 275.866058] #PF: error_code(0x0000) - not-present page [ 275.866061] PGD 1000067 P4D 1000067 PUD 110a067 PMD 46e3067 PTE 0 [ 275.866066] Oops: 0000 [#1] PREEMPT SMP PTI [ 275.866070] CPU: 2 PID: 49 Comm: kworker/u8:2 Not tainted 6.1.0-rc6-00018-gb357e7ac-dirty #54 [ 275.866074] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 [ 275.866076] Workqueue: vkms_composer vkms_composer_worker [vkms] [ 275.866084] RIP: 0010:XRGB8888_to_argb_u16+0x5c/0xa0 [vkms] [ 275.866092] Code: bf 56 0a 0f af 56 70 48 8b 76 28 01 ca 49 83 f8 02 41 b9 01 00 00 00 4d 0f 43 c8 48 01 f2 48 83 c2 02 31 f6 66 c7 04 f0 ff ff <0f> b6 0c b2 89 cf c1 e7 08 09 cf 66 89 7c f0 02 0f b6 4c b2 ff 89 [ 275.866095] RSP: 0018:ffffb382801b7db0 EFLAGS: 00010246 [ 275.866098] RAX: ffff896336ace000 RBX: ffff896310e293c0 RCX: 0000000000000000 [ 275.866101] RDX: ffffb382814e8002 RSI: 0000000000000000 RDI: ffffb382801b7de8 [ 275.866103] RBP: 0000000000001400 R08: 0000000000000280 R09: 0000000000000280 [ 275.866105] R10: 0000000000000010 R11: ffffffffc011d990 R12: ffff896302a1ece0 [ 275.866107] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000080008001 [ 275.866109] FS: 0000000000000000(0000) GS:ffff89637dd00000(0000) knlGS:0000000000000000 [ 275.866112] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 275.866114] CR2: ffffb382814e8002 CR3: 0000000003bb4000 CR4: 00000000000006e0 [ 275.866120] Call Trace: [ 275.866123] <TASK> [ 275.866124] compose_active_planes+0x1c4/0x380 [vkms] [ 275.866132] vkms_composer_worker+0x9f/0x130 [vkms] [ 275.866139] process_one_work+0x1c0/0x370 [ 275.866160] worker_thread+0x221/0x410 [ 275.866164] ? worker_clr_flags+0x50/0x50 [ 275.866167] kthread+0xe1/0x100 [ 275.866172] ? kthread_blkcg+0x30/0x30 [ 275.866176] ret_from_fork+0x22/0x30 [ 275.866181] </TASK> [ 275.866182] Modules linked in: vkms [ 275.866186] CR2: ffffb382814e8002 [ 275.866191] ---[ end trace 0000000000000000 ]--- Therefore, introduce again prepare_fb and cleanup_fb functions to the vkms, which were previously removed on commit b43e2ec0 ("drm/vkms: Let shadow-plane helpers prepare the plane's FB"). Fixes: 359c6649 ("drm/gem: Implement shadow-plane {begin, end}_fb_access with vmap") Acked-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230111131304.106039-1-mcanal@igalia.com
-
- 11 Jan, 2023 16 commits
-
-
Daniel Vetter authored
The documentation for struct drm_minor already states this, but that's not always that easy to find. Also due to historical reasons we still have the minor-centric interfaces (like drm_debugfs_create_files), but since this is now getting fixed we can put a few more pointers in place as to how this should be done ideally. Note that debugfs isn't there yet for all cases (debugfs files on kms objects like crtc/connector aren't supported, neither debugfs files with full fops), so the debugfs side of this is still rather aspirational and more for new users than converting everything existing. todo.rst covers the additional work needed already. Motivated by some discussion with Rodrigo on irc about how drm/xe should lay out its sysfs interfaces. v2: Make the debugfs situation clearer in the commit message, but don't elaborate more in the actual kerneldoc to avoid distracting from the main message around sysfs (Jani) Also fix some typos. Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Melissa Wen <mwen@igalia.com> Reviewed-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Wambui Karuga <wambui.karugax@gmail.com> Cc: Maíra Canal <mcanal@igalia.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Melissa Wen <mwen@igalia.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230109164604.3860862-1-daniel.vetter@ffwll.ch
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-14-javierm@redhat.com
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
Guido Günther <agx@sigxcpu.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230107191822.3787147-12-javierm@redhat.com
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macros defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There is a macro for this already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macro defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macros defined in the driver. Signed-off-by:
-
Javier Martinez Canillas authored
There are macros for these already in the <drm/drm_mipi_dsi.h> header, use that instead and delete the custom DSI write macros defined in the driver. Signed-off-by:
-
Abel Vesa authored
Add an eDP panel entry for IVO M133NW4J. Due to lack of documentation, use the delay_200_500_p2e100 timings like some other IVO entries for now. Signed-off-by:
Abel Vesa <abel.vesa@linaro.org> Reviewed-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Abel Vesa authored
The actual name is R133NW4K-R0. Fixes: 0f9fa5f5 ("drm/panel-edp: add IVO M133NW4J-R3 panel entry") Signed-off-by:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
-
- 10 Jan, 2023 21 commits
-
-
Siddh Raman Pant authored
drm_print.h says DRM_DEBUG_LEASE is deprecated in favor of drm_dbg_lease(). Signed-off-by:
Siddh Raman Pant <code@siddh.me> Reviewed-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
-
Siddh Raman Pant authored
drm_print.h says DRM_DEBUG_ATOMIC is deprecated in favor of drm_dbg_atomic(). Signed-off-by:
-
Siddh Raman Pant authored
drm_print.h says DRM_DEBUG_PRIME is deprecated in favor of drm_dbg_prime(). Signed-off-by:
-
Uwe Kleine-König authored
The driver core takes care about removing driver data, so this can be dropped from the driver. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by:
-
Uwe Kleine-König authored
dcss_drv_platform_remove() is only called for a device after dcss_drv_platform_probe() returned 0. In that case dev_set_drvdata() was called with a non-NULL value and so dev_get_drvdata() won't return NULL. Signed-off-by:
-
Maíra Canal authored
The structs drm_debugfs_info and drm_debugfs_entry don't have descriptions for their parameters, which is causing the following warnings: include/drm/drm_debugfs.h:93: warning: Function parameter or member 'name' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:93: warning: Function parameter or member 'show' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:93: warning: Function parameter or member 'driver_features' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:93: warning: Function parameter or member 'data' not described in 'drm_debugfs_info' include/drm/drm_debugfs.h:105: warning: Function parameter or member 'dev' not described in 'drm_debugfs_entry' include/drm/drm_debugfs.h:105: warning: Function parameter or member 'file' not described in 'drm_debugfs_entry' include/drm/drm_debugfs.h:105: warning: Function parameter or member 'list' not described in 'drm_debugfs_entry' Therefore, fix the warnings by adding descriptions to all struct parameters. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230105193039.287677-2-mcanal@igalia.com
-
Maíra Canal authored
Currently, debugfs functions are using symbolic macros as permission bits, but checkpatch reinforces permission bits in the octal form, as they are more readable and easier to understand [1]. Moreover, using the symbolic macro S_IFREG is redundant. Therefore, use octal permission bits in all debugfs functions. [1] https://docs.kernel.org/dev-tools/checkpatch.html#permissionsSuggested-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Javier Martinez Canillas authored
Add myself as maintainer for the driver and devicetree bindings schema. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230102230733.3506624-4-javierm@redhat.com
-
Kamil Trzciński authored
The driver is for panels based on the Himax HX8394 controller, such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that uses a MIPI-DSI interface. Signed-off-by:
Kamil Trzciński <ayufan@ayufan.eu> Co-developed-by:
Ondrej Jirman <megi@xff.cz> Signed-off-by:
Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Tested-by:
Peter Robinson <pbrobinson@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
Add device tree bindings for panels based on the Himax HX8394 controller, such as the HannStar HSD060BHW4 720x1440 TFT LCD panel that is connected through a MIPI-DSI video interface. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Simon Ser authored
The code 'b' is used for dma-buf IOCTLs. Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221128133853.355645-1-contact@emersion.fr
-
Uwe Kleine-König authored
The driver doesn't make use of any symbol provided by <linux/i2c.h>. So drop the include. Signed-off-by:
-
Uwe Kleine-König authored
The listed address doesn't work any more: puck.chen@hisilicon.com host mx5.hisilicon.com [124.71.93.234] SMTP error from remote mail server after RCPT TO:<puck.chen@hisilicon.com>: 551 5.1.1 <puck.chen@hisilicon.com>: Recipient address rejected: Failed recipient validation check.: host 127.0.0.1[127.0.0.1] said: 554 5.7.1 recipient verify from ldap failed (in reply to RCPT TO command) Signed-off-by: -
Uwe Kleine-König authored
While working on a drm driver that doesn't need the i2c algobit stuff I noticed that DRM selects this code even though only 8 drivers actually use it. While also only some drivers use i2c, keep the select for I2C for the next cleanup patch. Still prepare this already by also selecting I2C for the individual drivers. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
Ignoring errors from devm_clk_get() is wrong. To handle not all platforms having an axi clk use devm_clk_get_optional() instead and do proper error handling. Also the clk API handles NULL as a dummy clk (which is also returned by devm_clk_get_optional() if there is no clk) so there is no need to check for NULL before calling clk_prepare_enable() or its counter part. Signed-off-by:
-
