As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns may be of the type lskcipher, only the common
fields may be accessed.  This was already the case but use the
correct helpers to make this more obvious.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add code to handle an underlying lskcihper object when grabbing
an skcipher spawn.

Fixes: 31865c4c ("crypto: skcipher - Add lskcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As skcipher spawns can be of two different types (skcipher vs.
lskcipher), only the common fields can be accessed.  Add a helper
to return the common algorithm object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace skcipher implementation with lskcipher.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As lskcipher requires the ecb wrapper for the transition add an
explicit dependency on it so that it is always present.  This can
be removed once all simple ciphers have been converted to lskcipher.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 705b52fe ("crypto: cbc - Convert from skcipher to lskcipher")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Create CRYPTO_QAT namespace for symbols exported by the qat_common
module and import those in the QAT drivers. It will reduce the global
namespace crowdedness and potential misuse or the API.

This does not introduce any functional change.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove zlib-deflate test vectors as it no longer exists in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>

Remove the implementation of zlib-deflate because it is completely
unused in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>

Remove the implementation of zlib-deflate because it is completely
unused in the kernel.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>

Remove support for md4 md5 hash and signatures in x.509 certificate
parsers, pkcs7 signature parser, authenticode parser.

All of these are insecure or broken, and everyone has long time ago
migrated to alternative hash implementations.

Also remove md2 & md3 oids which have already didn't have support.

This is also likely the last user of md4 in the kernel, and thus
crypto/md4.c and related tests in tcrypt & testmgr can likely be
removed. Other users such as cifs smbfs ext modpost sumversions have
their own internal implementation as needed.
Signed-off-by: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Correct typo of "destination".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Correct typos of "destination".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add compatible for hardware number generator node for
Amlogic S4-series.
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For some Amlogic SOC's, mechanism to obtain random number
has been changed. For example, S4 now uses status bit waiting algo.
Signed-off-by: Alexey Romanov <avromanov@sberdevices.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the Kunpeng accelerator executes tasks such as encryption
and decryption have minimum requirements on the number of device
queues. If the number of queues does not meet the requirement,
the process initialization will fail. Therefore, the driver checks
the number of queues on the device before registering the algorithm.
If the number does not meet the requirements, the driver does not register
the algorithm to crypto subsystem, the device is still added to the
qm_list.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The type of aeq has only 4bits in dw0 17 to 20bits, but 15bits(17 to
31bits) are read in function qm_aeq_thread(). The remaining 11bits(21
to 31bits) are reserved for aeq, but may not be 0. To avoid getting
incorrect value of type, other bits are cleared.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If the queue isolation feature is enabled, the number of queues
supported by the device changes. When PF is enabled using the
current default number of queues, the default number of queues may
be greater than the number supported by the device. As a result,
the PF fails to be bound to the driver.

After modification, if queue isolation feature is enabled, when
the default queue parameter is greater than the number supported
by the device, the number of enabled queues will be changed to
the number supported by the device, so that the PF and driver
can be properly bound.

Fixes: 8bbecfb4 ("crypto: hisilicon/qm - add queue isolation support for Kunpeng930")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, the alignment of each field in struct aesni_xts_ctx occurs
right before every access. However, it's possible to perform this
alignment ahead of time.

Introduce a helper function that converts struct crypto_skcipher *tfm
to struct aesni_xts_ctx *ctx and returns an aligned address. Utilize
this helper function at the beginning of each XTS function and then
eliminate redundant alignment code.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/ZFWQ4sZEVu%2FLHq+Q@gmail.com/Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, every field in struct aesni_xts_ctx is defined as a byte
array of the same size as struct crypto_aes_ctx. This data type
is obscure and the choice lacks justification.

To rectify this, update the field type in struct aesni_xts_ctx to
match its actual structure.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/ZFWQ4sZEVu%2FLHq+Q@gmail.com/Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The address alignment code has been duplicated for each mode. Instead
of duplicating the same code, refactor the alignment code and simplify
the alignment helpers.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Link: https://lore.kernel.org/all/20230526065414.GB875@sol.localdomain/Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The ASN.1 module in RFC 5280 appendix A.1 uses EXPLICIT TAGS whereas the
one in appendix A.2 uses IMPLICIT TAGS.

The kernel's simplified asn1_compiler.c always uses EXPLICIT TAGS, hence
definitions from appendix A.2 need to be annotated as IMPLICIT for the
compiler to generate RFC-compliant code.

In particular, GeneralName is defined in appendix A.2:

GeneralName ::= CHOICE {
        otherName                       [0] OtherName,
        ...
        dNSName                         [2] IA5String,
        x400Address                     [3] ORAddress,
        directoryName                   [4] Name,
        ...
        }

Because appendix A.2 uses IMPLICIT TAGS, the IA5String tag (0x16) of a
dNSName is not rendered.  Instead, the string directly succeeds the
[2] tag (0x82).

Likewise, the SEQUENCE tag (0x30) of an OtherName is not rendered.
Instead, only the constituents of the SEQUENCE are rendered:  An OID tag
(0x06), a [0] tag (0xa0) and an ANY tag.  That's three consecutive tags
instead of a single encompassing tag.

The situation is different for x400Address and directoryName choices:
They reference ORAddress and Name, which are defined in appendix A.1,
therefore use EXPLICIT TAGS.

The AKID ASN.1 module is missing several IMPLICIT annotations, hence
isn't RFC-compliant.  In the unlikely event that an AKID contains other
elements beside a directoryName, users may see parse errors.

Add the missing annotations but do not tag this commit for stable as I
am not aware of any issue reports.  Fixes are only eligible for stable
if they're "obviously correct" and with ASN.1 there's no such thing.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

i.MX27 has only one Sahara interrupt. i.MX53 has two.

Describe this difference.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Describe the clocks (ipg and ahb) needed by Sahara block to operate.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

In the title, there is no need to mention "included in some i.MX chips"
as it is too vague.

Remove it to make it simpler.

While at it, also remove the extra space in the first reg entry.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

All callers ignore the return value, so simplify by not providing one.

Note that crypto_engine_exit() is typically called in a device driver's
remove path (or the error path in probe), where errors cannot be handled
anyhow.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Returning an error code in the remove function of a platform device has
no effect (compared to returning zero) apart from an error message, that
the error is ignored. Then the device is removed irrespective of the
returned value.

As kmb_ocs_hcu_remove is only called after kmb_ocs_hcu_probe() returned
successfully, platform_get_drvdata() never returns NULL and so the
respective check can just be dropped.

crypto_engine_exit() might return an error code but already emits an
error message in that case, so better return zero in
kmb_ocs_hcu_remove() even in this case to suppress another error
message. All other crypto drivers also ignore the return value of
crypto_engine_exit().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).

As found with Coccinelle[1], add __counted_by for struct adf_fw_counters.

[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci

Cc: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Adam Guerin <adam.guerin@intel.com>
Cc: Lucas Segarra Fernandez <lucas.segarra.fernandez@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: qat-linux@intel.com
Cc: linux-crypto@vger.kernel.org
Cc: llvm@lists.linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Increase the size of the buffers used for composing the names used for
the transport debugfs entries and the vector name to avoid a potential
truncation.

This resolves the following errors when compiling the driver with W=1
and KCFLAGS=-Werror on GCC 12.3.1:

    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c: In function ‘adf_ring_debugfs_add’:
    drivers/crypto/intel/qat/qat_common/adf_transport_debug.c:100:60: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
    drivers/crypto/intel/qat/qat_common/adf_isr.c: In function ‘adf_isr_resource_alloc’:
    drivers/crypto/intel/qat/qat_common/adf_isr.c:197:47: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 5 [-Werror=format-truncation=]

Fixes: a672a9dc ("crypto: qat - Intel(R) QAT transport code")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: d6bbd4ee ("crypto: caam/jr - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The oversampling rate used by the Jitter RNG allows the configuration of
the heuristically implied entropy in one timing measurement. This
entropy rate is (1 / OSR) bits of entropy per time stamp.

Considering that the Jitter RNG now support APT/RCT health tests for
different OSRs, allow this value to be configured at compile time to
support systems with limited amount of entropy in their timer.

The allowed range of OSR values complies with the APT/RCT cutoff health
test values which range from 1 through 15.

The default value of the OSR selection support is left at 1 which is the
current default. Thus, the addition of the configuration support does
not alter the default Jitter RNG behavior.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The memory size consumed by the Jitter RNG is one contributing factor in
the amount of entropy that is gathered. As the amount of entropy
directly correlates with the distance of the memory from the CPU, the
caches that are possibly present on a given system have an impact on the
collected entropy.

Thus, the kernel compile time should offer a means to configure the
amount of memory used by the Jitter RNG. Although this option could be
turned into a runtime option (e.g. a kernel command line option), it
should remain a compile time option as otherwise adminsitrators who may
not have performed an entropy assessment may select a value that is
inappropriate.

The default value selected by the configuration is identical to the
current Jitter RNG value. Thus, the patch should not lead to any change
in the Jitter RNG behavior.

To accommodate larger memory buffers, kvzalloc / kvfree is used.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The oversampling rate (OSR) value specifies the heuristically implied
entropy in the recorded data - H_submitter = 1/osr. A different entropy
estimate implies a different APT/RCT cutoff value. This change adds
support for OSRs 1 through 15. This OSR can be selected by the caller
of the Jitter RNG.

For this patch, the caller still uses one hard-coded OSR. A subsequent
patch allows this value to be configured.

In addition, the power-up self test is adjusted as follows:

* It allows the caller to provide an oversampling rate that should be
tested with - commonly it should be the same as used for the actual
runtime operation. This makes the power-up testing therefore consistent
with the runtime operation.

* It calls now jent_measure_jitter (i.e. collects the full entropy
that can possibly be harvested by the Jitter RNG) instead of only
jent_condition_data (which only returns the entropy harvested from
the conditioning component). This should now alleviate reports where
the Jitter RNG initialization thinks there is too little entropy.

* The power-up test now solely relies on the (enhanced) APT and RCT
test that is used as a health test at runtime.

The code allowing the different OSRs as well as the power-up test
changes are present in the user space version of the Jitter RNG 3.4.1
and thus was already in production use for some time.

Reported-by "Ospan, Abylay" <aospan@amazon.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

key buffer is not copied in chachapoly_setkey function,
results in wrong output for encryption/decryption operation.

fix this by memcpy the key in caam_ctx key arrary

Fixes: c10a5336 ("crypto: caam/qi2 - add support for Chacha20 + Poly1305")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Implement stm32_rng_suspend()/stm32_rng_resume() low-power APIs
called when the hardware block context will be lost.

There is no need to save the RNG_CR register in
stm32_rng_runtime_suspend() as the context is not lost. Therefore,
only enable/disable the RNG in the runtime sequences.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

If "st,rng-lock-conf" DT binding property is set for a stm32-rng node,
the RNG configuration will be locked until next hardware block reset
or platform reset.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

For NIST certification the noise source sampling may need to be
restrained.

This change implements an algorithm that gets the rate of the RNG
clock and apply the correct value in CLKDIV field in RNG_CR register
to force the RNG clock rate to be "max_clock_rate" maximum.

As it is platform-specific, implement it as a compat data.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Try to conceal seed errors when possible. If, despite the error
concealing tries, a seed error is still present, then return an error.

A clock error does not compromise the hardware block and data can
still be read from RNG_DR. Just warn that the RNG clock is too slow
and clear RNG_SR.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The RNG driver should be capable of recovering from an error. Implement
an error concealment API. This avoids irrecoverable RNG state.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>