- 09 Oct, 2023 21 commits
-
-
Dmitry Baryshkov authored
The dpu_encoder_phys_cmd_te_rd_ptr_irq() function uses neither hw_intf nor hw_pp data, so we can drop the corresponding check. Reviewed-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Patchwork: https://patchwork.freedesktop.org/patch/555544/ Link: https://lore.kernel.org/r/20230904020454.2945667-8-dmitry.baryshkov@linaro.org
-
Dmitry Baryshkov authored
Replace the only user of the DPU_INTF_TE feature flag with the direct DPU version comparison. Reviewed-by:
-
Dmitry Baryshkov authored
The DPU_INTF_TE bit is set for all INTF blocks on DPU >= 5.0, however only INTF_1 and INTF_2 actually support tearing control (both are INTF_DSI). Rather than trying to limit the DPU_INTF_TE feature bit to those two INTF instances, check for the major && INTF type. Reviewed-by:
-
Dmitry Baryshkov authored
Inline the _setup_intf_ops() function, it makes it easier to handle different conditions involving INTF configuration. Reviewed-by:
-
Dmitry Baryshkov authored
The DPU_PINGPONG_TE flag became unused, we can drop it now. Reviewed-by:
-
Dmitry Baryshkov authored
The DPU_PINGPONG_TE bit is set for all PINGPONG blocks on DPU < 5.0. Rather than checking for the flag, check for the presense of the corresponding interrupt line. Reviewed-by:
-
Dmitry Baryshkov authored
Inline the _setup_pingpong_ops() function, it makes it easier to handle different conditions involving PINGPONG configuration. Reviewed-by:
-
Jani Nikula authored
The DP CTS test for EDID last block checksum expects the checksum for the last block, invalid or not. Skip the validity check. For the most part (*), the EDIDs returned by drm_get_edid() will be valid anyway, and there's the CTS workaround to get the checksum for completely invalid EDIDs. See commit 7948fe12 ("drm/msm/dp: return correct edid checksum after corrupted edid checksum read"). This lets us remove one user of drm_edid_block_valid() with hopes the function can be removed altogether in the future. (*) drm_get_edid() ignores checksum errors on CTA extensions. Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: Stephen Boyd <swboyd@chromium.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/555361/ Link: https://lore.kernel.org/r/20230901142034.580802-1-jani.nikula@intel.comSigned-off-by:
-
Stephen Boyd authored
This function is simply drm_dp_is_branch() so use that instead of open-coding it. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
The function dp_link_parse_sink_count() is really just drm_dp_read_sink_count(). It debug prints out the bit for content protection (DP_SINK_CP_READY), but that is not useful beyond debug because 'link->dp_link.sink_count' is overwritten to only contain the sink_count in this same function. Just use drm_dp_read_sink_count() in the one place this function is called to simplify. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
These are open-coded versions of common functions. Replace them with the common code to improve readability. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
The member 'aux_cfg_update_done' is always false. This is dead code that never runs. Remove it. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
We read the downstream port count and capability info but never use it anywhere. Remove 'ds_port_cnt' and 'ds_cap_info' and any associated code from this driver. Fold the check for 'dfp_present' into a call to drm_dp_is_branch() at the one place it is used to get rid of any member storage related to downstream ports. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
Use the common function drm_dp_read_sink_count() instead of open-coding it. This shrinks the kernel text a tiny bit. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Stephen Boyd authored
This function duplicates the common function drm_dp_read_dpcd_caps(). The array of DPCD registers filled in is one size larger than the function takes, but from what I can tell that extra byte was never used. Resize the array and use the common function to reduce the code here. Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
Jessica Zhang authored
DSI 6G v2.5.x+ supports a data-bus widen mode that allows DSI to send 48 bits of compressed data instead of 24. Enable this mode whenever DSC is enabled for supported chipsets. Signed-off-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Reviewed-by:
-
Jessica Zhang authored
Add a DATABUS_WIDEN bit to the MDP_CTRL2 register to allow DSI to enable databus widen mode. Reviewed-by:
-
Jessica Zhang authored
DPU supports a data-bus widen mode for DSI INTF. Enable this mode for all supported chipsets if widebus is enabled for DSI. Signed-off-by:
-
Jessica Zhang authored
Move the setting of dpu_enc::wide_bus_en to dpu_encoder_virt_atomic_enable() so that it mirrors how dpu_enc::dsc is being set. Since wide bus for DSI is related to DSC, having it mirror how DSC is set in DPU will also make it easier to accommodate for the possibility of DSC for DSI being set during runtime in the future. Reviewed-by:
-
Ruan Jinjie authored
The NULL initialization of the pointers assigned by kzalloc() first is not necessary, because if the kzalloc() failed, the pointers will be assigned NULL, otherwise it works as usual. so remove it. Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by:
-
Dmitry Baryshkov authored
In order to simplify IRQ declarations, shift IRQ indices by 1. This makes 0 the 'no IRQ' value. Thanks to this change, we do no longer have to explicitly set the 'no interrupt' fields in catalog structures. Reviewed-by:
-
- 08 Oct, 2023 6 commits
-
-
Dmitry Baryshkov authored
In preparation to reworking IRQ indcies, stop using raw indices in kernel traces. Instead use a pair of register index and bit. This corresponds closer to the values in HW catalog. Reviewed-by:
-
Dmitry Baryshkov authored
In preparation to reworking IRQ indcies, stop using raw IRQ indices in kernel output (both printk and debugfs). Instead use a pair of register index and bit. This corresponds closer to the values in HW catalog. Signed-off-by:
-
Dmitry Baryshkov authored
The size of the irq table is static, it has MDP_INTR_MAX * 32 interrupt entries. Provide the fixed length and drop struct_size() statement. Reviewed-by:
-
Dmitry Baryshkov authored
In preparation to reworking IRQ indices, move irq_tbl access to a separate helper. Reviewed-by:
-
Dmitry Baryshkov authored
In preparation to reworking IRQ indices, move irq_idx validation to a separate helper. Reviewed-by:
-
Dmitry Baryshkov authored
There is no point in passing the IRQ index to IRQ callbacks, no function uses that. Drop it at last. Reviewed-by:
-
- 05 Oct, 2023 1 commit
-
-
Abhinav Kumar authored
Currently, dpu_plane_atomic_check() does not check whether the plane can process the image without exceeding the per chipset limits for MDP clock. This leads to underflow issues because the SSPP is not able to complete the processing for the data rate of the display. Fail the dpu_plane_atomic_check() if the SSPP cannot process the image without exceeding the MDP clock limits. changes in v2: - use crtc_state's adjusted_mode instead of mode Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
-
- 20 Sep, 2023 6 commits
-
-
Stephen Boyd authored
These debug printks are missing newlines, causing drm debug logs to be hard to read. Add newlines so that the messages are on their own line. Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Cc: Vinod Polimera <quic_vpolimer@quicinc.com> Signed-off-by:
-
Abhinav Kumar authored
_dpu_plane_calc_bw() uses integer variables to calculate the bandwidth used during plane bandwidth calculations. However for high resolution displays this overflows easily and leads to below errors [dpu error]crtc83 failed performance check -7 Promote the intermediate variables to u64 to avoid overflow. changes in v2: - change to u64 where actually needed in the math Fixes: c33b7c03 ("drm/msm/dpu: add support for clk and bw scaling for display") Reviewed-by:
Nia Espera <nespera@igalia.com> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/32Tested-by:
-
Dan Carpenter authored
The irq_of_parse_and_map() function returns zero on error. It never returns negative error codes. Fix the check. Fixes: a689554b ("drm/msm: Initial add DSI connector support") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Abhinav Kumar authored
dsi_wait4video_done() API waits for the DSI video mode engine to become idle so that we can transmit the DCS commands in the beginning of BLLP. However, with the current sequence, the MDP timing engine is turned on after the panel's pre_enable() callback which can send out the DCS commands needed to power up the panel. During those cases, this API will always timeout and print out the error spam leading to long bootup times and log flooding. Fix this by checking if the DSI video engine was actually busy before waiting for it to become idle otherwise this is a redundant wait. changes in v2: - move the reg read below the video mode check - minor fixes in commit text Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/34 Fixes: a689554b ("drm/msm: Initial add DSI connector support") Signed-off-by:
-
Dmitry Baryshkov authored
According to the vendor DT files, msm8998 has highest-bank-bit equal to 2. Update the data accordingly. Fixes: 6f410b24 ("drm/msm/mdss: populate missing data") Signed-off-by:
-
Kuogee Hsieh authored
DP PHY re-initialization done using dp_ctrl_reinitialize_mainlink() will cause PLL unlocked initially and then PLL gets locked at the end of initialization. PLL_UNLOCKED interrupt will fire during this time if the interrupt mask is enabled. However currently DP driver link training implementation incorrectly re-initializes PHY unconditionally during link training as the PHY was already configured in dp_ctrl_enable_mainlink_clocks(). Fix this by re-initializing the PHY only if the previous link training failed. [drm:dp_aux_isr] *ERROR* Unexpected DP AUX IRQ 0x01000000 when not busy Fixes: c943b494 ("drm/msm/dp: add displayPort driver support") Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/30Signed-off-by:
-
- 17 Sep, 2023 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix an UV boot crash - Skip spurious ENDBR generation on _THIS_IP_ - Fix ENDBR use in putuser() asm methods - Fix corner case boot crashes on 5-level paging - and fix a false positive WARNING on LTO kernels" * tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/purgatory: Remove LTO flags x86/boot/compressed: Reserve more memory for page tables x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*() x86/ibt: Suppress spurious ENDBR x86/platform/uv: Use alternate source for socket to node data
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Fix a performance regression on large SMT systems, an Intel SMT4 balancing bug, and a topology setup bug on (Intel) hybrid processors" * tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain sched/fair: Fix SMT4 group_smt_balance handling sched/fair: Optimize should_we_balance() for large SMT systems
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool fix from Ingo Molnar: "Fix a cold functions related false-positive objtool warning that triggers on Clang" * tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix _THIS_IP_ detection for cold functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull WARN fix from Ingo Molnar: "Fix a missing preempt-enable in the WARN() slowpath" * tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: panic: Reenable preemption in WARN slowpath
-
Linus Torvalds authored
The choose_32_64() macros were added to deal with an odd inconsistency between the 32-bit and 64-bit layout of 'struct stat' way back when in commit a52dd971 ("vfs: de-crapify "cp_new_stat()" function"). Then a decade later Mikulas noticed that said inconsistency had been a mistake in the early x86-64 port, and shouldn't have existed in the first place. So commit 932aba1e ("stat: fix inconsistency between struct stat and struct compat_stat") removed the uses of the helpers. But the helpers remained around, unused. Get rid of them. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
