Skip to content

L
linux
Switch branch/tag
  1. 05 Oct, 2015 2 commits
  3. 04 Oct, 2015 26 commits
  5. 03 Oct, 2015 12 commits
    • Eric Dumazet's avatar
      tcp/dccp: add SLAB_DESTROY_BY_RCU flag for request sockets · e96f78ab
      Eric Dumazet authored 
      Before letting request sockets being put in TCP/DCCP regular
ehash table, we need to add either :

- SLAB_DESTROY_BY_RCU flag to their kmem_cache
- add RCU grace period before freeing them.

Since we carefully respected the SLAB_DESTROY_BY_RCU protocol
like ESTABLISH and TIMEWAIT sockets, use it here.

req_prot_init() being only used by TCP and DCCP, I did not add
a new slab_flags into their rsk_prot, but reuse prot->slab_flags

Since all reqsk_alloc() users are correctly dealing with a failure,
add the __GFP_NOWARN flag to avoid traces under pressure.

Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e96f78ab
    • David S. Miller's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue · 4236e2a1
      David S. Miller authored 
      Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2015-09-30

This series contains updates to i40e and i40evf only.

Vasily Averin provides a couple of rtnl lock/unlock fixes for both i40e
and i40evf.

Shannon provides several updates and fixes, first fixes up a type clash
in i40e_aq_rc_to_posix(), where the error codes are signed values, so we
need to treat them as such.  Then fixes up a padding issue where an
extra byte is added in i40e_aqc_get_cee_dcb_cfg_v1_resp to directly
acknowledge the padding.  Updated i40e to keep debugfs register read
and writes from accessing outside of the io-remapped space.  Added
support and device id for another 20 GbE device.

Jesse fixes the transmit hand workaround code for ARM that was causing
Tx hangs to still occur occasionally when there really was no hang.  Then
fixed the receive dropped counter to show up in netstat interface.
Refactor the interrupt enable function since it was always making the
caller add the base_vector from the VSI struct which is already passed
to the function.  Fix kbuild warnings found in 0day build infrastructure
by adding a harmless cast to a dev_info(), also fix 32 bit build
warnings found by sparse.

Greg fixed a configuration error that results if a port VLAN is set
for a VF before the VF driver is loaded, so that when the VF driver is
loaded the port VLAN is ignored.

Mitch fixes the use of QOS field consistently in
i40e_ndo_set_vf_port_vlan().  Modified the init timing of the driver
to increase stability on load/unload and SR-IOV enable/disable cycles.

Anjali updates i40e to not collect VEB stats if they are disabled in the
hardware for performance reasons.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4236e2a1
    • David S. Miller's avatar
      Merge branch 'ravb-r8a7795' · 28117b08
      David S. Miller authored 
      Simon Horman says:

====================
ravb: Add support for r8a7795 SoC

please consider this series for net-next.
It enhances the ravb driver to support the r8a7795 SoC.

Changes:

* Dropped RFC prefix
* Details in changelog of individual patches

Base:

* net-next/master

Availability:

To aid review of this in conjunction with other EtherAVB changes
the following branches are available in my renesas tree on kernel.org.

* me/r8a7795-ravb-driver-v4: this series
* me/r8a7795-ravb-pfc-v2: r8a7795 sh-pfc update for EthernetAVB
* me/r8a7795-ravb-integration-v4: enable EthernetAVB on r8a7795
* me/r8a7795-ravb-driver-and-integration-v4.runtime:
      the above three branches with their runtime dependencies
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      28117b08
    • Kazuya Mizuguchi's avatar
      ravb: Add support for r8a7795 SoC · 22d4df8f
      Kazuya Mizuguchi authored 
      This patch supports the r8a7795 SoC by:
- Using two interrupts
  + One for E-MAC
  + One for everything else
  + Both can be handled by the existing common interrupt handler, which
    affords a simpler update to support the new SoC. In future some
    consideration may be given to implementing multiple interrupt handlers
- Limiting the phy speed to 100Mbit/s for the new SoC;
  at this time it is not clear how this restriction may be lifted
  but I hope it will be possible as more information comes to light
Signed-off-by: default avatarKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
[horms: reworked]
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      22d4df8f
    • Kazuya Mizuguchi's avatar
      ravb: Document binding for r8a7795 SoC · 619f3bd2
      Kazuya Mizuguchi authored 
      This patch updates the ravb binding to support the r8a7795 SoC by:
- Adding a compat string for the new hardware
- Adding 25 named interrupts to binding for the new SoC;
  older SoCs continue to use a single multiplexed interrupt

The example is also updated to reflect the r8a7795 as this is the
more complex case.

Based on work by Kazuya Mizuguchi and others.
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Acked-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      619f3bd2
    • Kazuya Mizuguchi's avatar
      ravb: Provide dev parameter to DMA API · e2dbb33a
      Kazuya Mizuguchi authored 
      This patch is in preparation for using this driver on arm64 where the
implementation of __dma_alloc_coherent fails if a device parameter is not
provided.
Signed-off-by: default avatarKazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: default avatarYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: default avatarMasaru Nagai <masaru.nagai.vx@renesas.com>
[horms: squashed into a single patch]
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2dbb33a
    • Simon Horman's avatar
      phylib: Add phy_set_max_speed helper · f3a6bd39
      Simon Horman authored 
      Add a helper to allow ethernet drivers to limit the speed of a phy
(that they are attached to).

This mainly involves factoring out the business-end of
of_set_phy_supported() and exporting a new symbol.

This code seems to be open coded in several places, in several different
variants.

It is is envisaged that this will be used in situations where setting the
"max-speed" property in DT is not appropriate, e.g. because the maximum
speed is not a property of the phy hardware.
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f3a6bd39
    • David S. Miller's avatar
      Merge branch 'bpf-updates' · f8e1100a
      David S. Miller authored 
      Daniel Borkmann says:

====================
BPF updates

Some minor updates to {cls,act}_bpf to retrieve routing realms
and to make skb->priority writable.

Thanks!

v1 -> v2:
 - Dropped preclassify patch for now from the series as the
   rest is pretty much independent of it
 - Rest unchanged, only rebased and already posted Acked-by's kept
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8e1100a
    • Daniel Borkmann's avatar
      sched, bpf: make skb->priority writable · 754f1e6a
      Daniel Borkmann authored 
      {cls,act}_bpf can now set the skb->priority from an eBPF program based
on various critera, so that for example classful qdiscs like multiq can
update the skb's priority during enqueue time and further push it down
into subsequent qdiscs.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      754f1e6a
    • Daniel Borkmann's avatar
      sched, bpf: add helper for retrieving routing realms · c46646d0
      Daniel Borkmann authored 
      Using routing realms as part of the classifier is quite useful, it
can be viewed as a tag for one or multiple routing entries (think of
an analogy to net_cls cgroup for processes), set by user space routing
daemons or via iproute2 as an indicator for traffic classifiers and
later on processed in the eBPF program.

Unlike actions, the classifier can inspect device flags and enable
netif_keep_dst() if necessary. tc actions don't have that possibility,
but in case people know what they are doing, it can be used from there
as well (e.g. via devs that must keep dsts by design anyway).

If a realm is set, the handler returns the non-zero realm. User space
can set the full 32bit realm for the dst.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c46646d0
    • Daniel Borkmann's avatar
      ebpf: migrate bpf_prog's flags to bitfield · a91263d5
      Daniel Borkmann authored 
      As we need to add further flags to the bpf_prog structure, lets migrate
both bools to a bitfield representation. The size of the base structure
(excluding insns) remains unchanged at 40 bytes.

Add also tags for the kmemchecker, so that it doesn't throw false
positives. Even in case gcc would generate suboptimal code, it's not
being accessed in performance critical paths.
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Acked-by: default avatarAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a91263d5
    • David S. Miller's avatar
      Merge branch 'switchdev-obj' · bd8762be
      David S. Miller authored 
      Jiri Pirko says:

====================
switchdev: bring back switchdev_obj

Second version of the patch extends to a patchset. Basically this patchset
brings object structure back which disappeared with recent Vivien's patchset.
Also it does a bit of naming changes in order to get the things in line.
Also, object id is put back into object structure.
Thanks to Scott and Vivien for review and suggestions.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bd8762be
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7