- 03 Feb, 2018 13 commits
-
-
Jesse Chan authored
commit 97b03136 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/gpio/gpio-iop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Jesse Chan <jc@linux.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jesse Chan authored
commit 348c7cf5 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/power/reset/zx-reboot.o see include/linux/module.h for more information This adds the license as "GPL v2", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Aaron Armstrong Skomra authored
commit 791ae273 upstream. Background: ExpressKey Remotes communicate their events via usb dongle. Each dongle can hold up to 5 pairings at one time and one EKR (identified by its serial number) can unfortunately be paired with its dongle more than once. The pairing takes place in a round-robin fashion. Input devices are only created once per EKR, when a new serial number is seen in the list of pairings. However, if a device is created for a "higher" paring index and subsequently a second pairing occurs at a lower pairing index, unpairing the remote with that serial number from any pairing index will currently cause a driver crash. This occurs infrequently, as two remotes are necessary to trigger this bug and most users have only one remote. As an illustration, to trigger the bug you need to have two remotes, and pair them in this order: 1. slot 0 -> remote 1 (input device created for remote 1) 2. slot 1 -> remote 1 (duplicate pairing - no device created) 3. slot 2 -> remote 1 (duplicate pairing - no device created) 4. slot 3 -> remote 1 (duplicate pairing - no device created) 5. slot 4 -> remote 2 (input device created for remote 2) 6. slot 0 -> remote 2 (1 destroyed and recreated at slot 1) 7. slot 1 -> remote 2 (1 destroyed and recreated at slot 2) 8. slot 2 -> remote 2 (1 destroyed and recreated at slot 3) 9. slot 3 -> remote 2 (1 destroyed and not recreated) 10. slot 4 -> remote 2 (2 was already in this slot so no changes) 11. slot 0 -> remote 1 (The current code sees remote 2 was paired over in one of the dongle slots it occupied and attempts to remove all information about remote 2 [1]. It calls wacom_remote_destroy_one for remote 2, but the destroy function assumes the lowest index is where the remote's input device was created. The code "cleans up" the other remote 2 pairings including the one which the input device was based on, assuming they were were just duplicate pairings. However, the cleanup doesn't call the devres release function for the input device that was created in slot 4). This issue is fixed by this commit. [1] Remote 2 should subsequently be re-created on the next packet from the EKR at the lowest numbered slot that it occupies (here slot 1). Fixes: f9036bd4 ("HID: wacom: EKR: use devres groups to manage resources") Signed-off-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Stephan Mueller authored
commit bb30b884 upstream. The user space interface allows specifying the type and mask field used to allocate the cipher. Only a subset of the possible flags are intended for user space. Therefore, white-list the allowed flags. In case the user space caller uses at least one non-allowed flag, EINVAL is returned. Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Ard Biesheuvel authored
commit c013cee9 upstream. Ensure that the input is byte swabbed before injecting it into the SHA3 transform. Use the get_unaligned() accessor for this so that we don't perform unaligned access inadvertently on architectures that do not support that. Fixes: 53964b9e ("crypto: sha3 - Add SHA-3 hash algorithm") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Stephan Mueller authored
commit 9c674e1e upstream. GCM can be invoked with a zero destination buffer. This is possible if the AAD and the ciphertext have zero lengths and only the tag exists in the source buffer (i.e. a source buffer cannot be zero). In this case, the GCM cipher only performs the authentication and no decryption operation. When the destination buffer has zero length, it is possible that no page is mapped to the SG pointing to the destination. In this case, sg_page(req->dst) is an invalid access. Therefore, page accesses should only be allowed if the req->dst->length is non-zero which is the indicator that a page must exist. This fixes a crash that can be triggered by user space via AF_ALG. Signed-off-by:
-
Hauke Mehrtens authored
commit b5b90077 upstream. This fixes a typo in the CRYPTO_KPP dependency of CRYPTO_ECDH. Fixes: 3c4b2390 ("crypto: ecdh - Add ECDH software support") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Linus Walleij authored
commit 24bd3efc upstream. The GPIO event descriptor was leaking kernel stack to userspace because we don't zero the variable before use. Ooops. Fix this. Reported-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Bartosz Golaszewski <brgl@bgdev.pl> Reviewed-by:
-
Patrice Chotard authored
commit b888fb6f upstream. Move the workaround from stmpe_gpio_irq_unmask() which is executed in atomic context to stmpe_gpio_irq_sync_unlock() which is not. It fixes the following issue: [ 1.500000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.500000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.15.0-rc2-00020-gbd4301f-dirty #28 [ 1.520000] Hardware name: STM32 (Device Tree Support) [ 1.520000] [<0000bfc9>] (unwind_backtrace) from [<0000b347>] (show_stack+0xb/0xc) [ 1.530000] [<0000b347>] (show_stack) from [<0001fc49>] (__schedule_bug+0x39/0x58) [ 1.530000] [<0001fc49>] (__schedule_bug) from [<00168211>] (__schedule+0x23/0x2b2) [ 1.550000] [<00168211>] (__schedule) from [<001684f7>] (schedule+0x57/0x64) [ 1.550000] [<001684f7>] (schedule) from [<0016a513>] (schedule_timeout+0x137/0x164) [ 1.550000] [<0016a513>] (schedule_timeout) from [<00168b91>] (wait_for_common+0x8d/0xfc) [ 1.570000] [<00168b91>] (wait_for_common) from [<00139753>] (stm32f4_i2c_xfer+0xe9/0xfe) [ 1.580000] [<00139753>] (stm32f4_i2c_xfer) from [<00138545>] (__i2c_transfer+0x111/0x148) [ 1.590000] [<00138545>] (__i2c_transfer) from [<001385cf>] (i2c_transfer+0x53/0x70) [ 1.590000] [<001385cf>] (i2c_transfer) from [<001388a5>] (i2c_smbus_xfer+0x12f/0x36e) [ 1.600000] [<001388a5>] (i2c_smbus_xfer) from [<00138b49>] (i2c_smbus_read_byte_data+0x1f/0x2a) [ 1.610000] [<00138b49>] (i2c_smbus_read_byte_data) from [<00124fdd>] (__stmpe_reg_read+0xd/0x24) [ 1.620000] [<00124fdd>] (__stmpe_reg_read) from [<001252b3>] (stmpe_reg_read+0x19/0x24) [ 1.630000] [<001252b3>] (stmpe_reg_read) from [<0002c4d1>] (unmask_irq+0x17/0x22) [ 1.640000] [<0002c4d1>] (unmask_irq) from [<0002c57f>] (irq_startup+0x6f/0x78) [ 1.650000] [<0002c57f>] (irq_startup) from [<0002b7a1>] (__setup_irq+0x319/0x47c) [ 1.650000] [<0002b7a1>] (__setup_irq) from [<0002bad3>] (request_threaded_irq+0x6b/0xe8) [ 1.660000] [<0002bad3>] (request_threaded_irq) from [<0002d0b9>] (devm_request_threaded_irq+0x3b/0x6a) [ 1.670000] [<0002d0b9>] (devm_request_threaded_irq) from [<001446e7>] (mmc_gpiod_request_cd_irq+0x49/0x8a) [ 1.680000] [<001446e7>] (mmc_gpiod_request_cd_irq) from [<0013d45d>] (mmc_start_host+0x49/0x60) [ 1.690000] [<0013d45d>] (mmc_start_host) from [<0013e40b>] (mmc_add_host+0x3b/0x54) [ 1.700000] [<0013e40b>] (mmc_add_host) from [<00148119>] (mmci_probe+0x4d1/0x60c) [ 1.710000] [<00148119>] (mmci_probe) from [<000f903b>] (amba_probe+0x7b/0xbe) [ 1.720000] [<000f903b>] (amba_probe) from [<001170e5>] (driver_probe_device+0x169/0x1f8) [ 1.730000] [<001170e5>] (driver_probe_device) from [<001171b7>] (__driver_attach+0x43/0x5c) [ 1.740000] [<001171b7>] (__driver_attach) from [<0011618d>] (bus_for_each_dev+0x3d/0x46) [ 1.740000] [<0011618d>] (bus_for_each_dev) from [<001165cd>] (bus_add_driver+0xcd/0x124) [ 1.740000] [<001165cd>] (bus_add_driver) from [<00117713>] (driver_register+0x4d/0x7a) [ 1.760000] [<00117713>] (driver_register) from [<001fc765>] (do_one_initcall+0xbd/0xe8) [ 1.770000] [<001fc765>] (do_one_initcall) from [<001fc88b>] (kernel_init_freeable+0xfb/0x134) [ 1.780000] [<001fc88b>] (kernel_init_freeable) from [<00167ee3>] (kernel_init+0x7/0x9c) [ 1.790000] [<00167ee3>] (kernel_init) from [<00009b65>] (ret_from_fork+0x11/0x2c) Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
-
Joel Stanley authored
commit 1696784e upstream. The GPIO tools build fails when using a buildroot toolchain that uses musl as it's C library: arm-broomstick-linux-musleabi-gcc -Wp,-MD,./.gpio-event-mon.o.d \ -Wp,-MT,gpio-event-mon.o -O2 -Wall -g -D_GNU_SOURCE \ -Iinclude -D"BUILD_STR(s)=#s" -c -o gpio-event-mon.o gpio-event-mon.c gpio-event-mon.c:30:6: error: unknown type name ‘u_int32_t’; did you mean ‘uint32_t’? u_int32_t handleflags, ^~~~~~~~~ uint32_t The glibc headers installed on my laptop include sys/types.h in unistd.h, but it appears that musl does not. Fixes: 97f69747 ("tools/gpio: add the gpio-event-mon tool") Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Max Gurtovoy authored
commit 6e8484c5 upstream. Cache the needed umr_fence and set the wqe ctrl segmennt accordingly. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Acked-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Doug Ledford <dledford@redhat.com> Cc: Marta Rybczynska <mrybczyn@kalray.eu> Signed-off-by:
-
Max Gurtovoy authored
commit 1410a90a upstream. HW can implement UMR wqe re-transmission in various ways. Thus, add HCA cap to distinguish the needed fence for UMR to make sure that the wqe wouldn't fail on mkey checks. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Linus Torvalds authored
commit ae665016 upstream. 范龙飞 reports that KASAN can report a use-after-free in __lock_acquire. The reason is due to insufficient serialization in lo_release(), which will continue to use the loop device even after it has decremented the lo_refcnt to zero. In the meantime, another process can come in, open the loop device again as it is being shut down. Confusion ensues. Reported-by:
范龙飞 <long7573@126.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
- 31 Jan, 2018 27 commits
-
-
Greg Kroah-Hartman authored
-
Ben Hutchings authored
commit 19952667 upstream. Commit bdcf0a42 ("kernel: make groups_sort calling a responsibility group_info allocators") appears to break nfsd rootsquash in a pretty major way. It adds a call to groups_sort() inside the loop that copies/squashes gids, which means the valid gids are sorted along with the following garbage. The net result is that the highest numbered valid gids are replaced with any lower-valued garbage gids, possibly including 0. We should sort only once, after filling in all the gids. Fixes: bdcf0a42 ("kernel: make groups_sort calling a responsibility ...") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
[ upstream commit f37a8cb8 ] Alexei found that verifier does not reject stores into context via BPF_ST instead of BPF_STX. And while looking at it, we also should not allow XADD variant of BPF_STX. The context rewriter is only assuming either BPF_LDX_MEM- or BPF_STX_MEM-type operations, thus reject anything other than that so that assumptions in the rewriter properly hold. Add test cases as well for BPF selftests. Fixes: d691f9e8 ("bpf: allow programs to write to certain skb fields") Reported-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Alexei Starovoitov authored
[ upstream commit 68fda450 ] due to some JITs doing if (src_reg == 0) check in 64-bit mode for div/mod operations mask upper 32-bits of src register before doing the check Fixes: 62258278 ("net: filter: x86: internal BPF JIT") Fixes: 7a12b503 ("sparc64: Add eBPF JIT.") Reported-by: syzbot+48340bb518e88849e2e3@syzkaller.appspotmail.com Signed-off-by:
-
Eric Dumazet authored
[ upstream commit c366287e ] Divides by zero are not nice, lets avoid them if possible. Also do_div() seems not needed when dealing with 32bit operands, but this seems a minor detail. Fixes: bd4cf0ed ("net: filter: rework/optimize internal BPF interpreter's instruction set") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
-
Daniel Borkmann authored
[ upstream commit be95a845 ] In addition to commit b2157399 ("bpf: prevent out-of-bounds speculation") also change the layout of struct bpf_map such that false sharing of fast-path members like max_entries is avoided when the maps reference counter is altered. Therefore enforce them to be placed into separate cachelines. pahole dump after change: struct bpf_map { const struct bpf_map_ops * ops; /* 0 8 */ struct bpf_map * inner_map_meta; /* 8 8 */ void * security; /* 16 8 */ enum bpf_map_type map_type; /* 24 4 */ u32 key_size; /* 28 4 */ u32 value_size; /* 32 4 */ u32 max_entries; /* 36 4 */ u32 map_flags; /* 40 4 */ u32 pages; /* 44 4 */ u32 id; /* 48 4 */ int numa_node; /* 52 4 */ bool unpriv_array; /* 56 1 */ /* XXX 7 bytes hole, try to pack */ /* --- cacheline 1 boundary (64 bytes) --- */ struct user_struct * user; /* 64 8 */ atomic_t refcnt; /* 72 4 */ atomic_t usercnt; /* 76 4 */ struct work_struct work; /* 80 32 */ char name[16]; /* 112 16 */ /* --- cacheline 2 boundary (128 bytes) --- */ /* size: 128, cachelines: 2, members: 17 */ /* sum members: 121, holes: 1, sum holes: 7 */ }; Now all entries in the first cacheline are read only throughout the life time of the map, set up once during map creation. Overall struct size and number of cachelines doesn't change from the reordering. struct bpf_map is usually first member and embedded in map structs in specific map implementations, so also avoid those members to sit at the end where it could potentially share the cacheline with first map values e.g. in the array since remote CPUs could trigger map updates just as well for those (easily dirtying members like max_entries intentionally as well) while having subsequent values in cache. Quoting from Google's Project Zero blog [1]: Additionally, at least on the Intel machine on which this was tested, bouncing modified cache lines between cores is slow, apparently because the MESI protocol is used for cache coherence [8]. Changing the reference counter of an eBPF array on one physical CPU core causes the cache line containing the reference counter to be bounced over to that CPU core, making reads of the reference counter on all other CPU cores slow until the changed reference counter has been written back to memory. Because the length and the reference counter of an eBPF array are stored in the same cache line, this also means that changing the reference counter on one physical CPU core causes reads of the eBPF array's length to be slow on other physical CPU cores (intentional false sharing). While this doesn't 'control' the out-of-bounds speculation through masking the index as in commit b2157399, triggering a manipulation of the map's reference counter is really trivial, so lets not allow to easily affect max_entries from it. Splitting to separate cachelines also generally makes sense from a performance perspective anyway in that fast-path won't have a cache miss if the map gets pinned, reused in other progs, etc out of control path, thus also avoids unintentional false sharing. [1] https://googleprojectzero.blogspot.ch/2018/01/reading-privileged-memory-with-side.htmlSigned-off-by:
-
Daniel Borkmann authored
[ upstream commit 7891a87e ] The following snippet was throwing an 'unknown opcode cc' warning in BPF interpreter: 0: (18) r0 = 0x0 2: (7b) *(u64 *)(r10 -16) = r0 3: (cc) (u32) r0 s>>= (u32) r0 4: (95) exit Although a number of JITs do support BPF_ALU | BPF_ARSH | BPF_{K,X} generation, not all of them do and interpreter does neither. We can leave existing ones and implement it later in bpf-next for the remaining ones, but reject this properly in verifier for the time being. Fixes: 17a52670 ("bpf: verifier (add verifier core)") Reported-by: syzbot+93c4904c5c70348a6890@syzkaller.appspotmail.com Signed-off-by:
-
Alexei Starovoitov authored
[ upstream commit 290af866 ] The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715. A quote from goolge project zero blog: "At this point, it would normally be necessary to locate gadgets in the host kernel code that can be used to actually leak data by reading from an attacker-controlled location, shifting and masking the result appropriately and then using the result of that as offset to an attacker-controlled address for a load. But piecing gadgets together and figuring out which ones work in a speculation context seems annoying. So instead, we decided to use the eBPF interpreter, which is built into the host kernel - while there is no legitimate way to invoke it from inside a VM, the presence of the code in the host kernel's text section is sufficient to make it usable for the attack, just like with ordinary ROP gadgets." To make attacker job harder introduce BPF_JIT_ALWAYS_ON config option that removes interpreter from the kernel in favor of JIT-only mode. So far eBPF JIT is supported by: x64, arm64, arm32, sparc64, s390, powerpc64, mips64 The start of JITed program is randomized and code page is marked as read-only. In addition "constant blinding" can be turned on with net.core.bpf_jit_harden v2->v3: - move __bpf_prog_ret0 under ifdef (Daniel) v1->v2: - fix init order, test_bpf and cBPF (Daniel's feedback) - fix offloaded bpf (Jakub's feedback) - add 'return 0' dummy in case something can invoke prog->bpf_func - retarget bpf tree. For bpf-next the patch would need one extra hunk. It will be sent when the trees are merged back to net-next Considered doing: int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT; but it seems better to land the patch as-is and in bpf-next remove bpf_jit_enable global variable from all JITs, consolidate in one place and remove this jit_init() function. Signed-off-by:
-
Alexei Starovoitov authored
[ upstream commit 90caccdd ] - bpf prog_array just like all other types of bpf array accepts 32-bit index. Clarify that in the comment. - fix x64 JIT of bpf_tail_call which was incorrectly loading 8 instead of 4 bytes - tighten corresponding check in the interpreter to stay consistent The JIT bug can be triggered after introduction of BPF_F_NUMA_NODE flag in commit 96eabe7a in 4.14. Before that the map_flags would stay zero and though JIT code is wrong it will check bounds correctly. Hence two fixes tags. All other JITs don't have this problem. Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Eric Dumazet authored
[ upstream commit 84ccac6e ] Saves 4 bytes replacing following instructions : lea rax, [rsi + rdx * 8 + offsetof(...)] mov rax, qword ptr [rax] cmp rax, 0 by : mov rax, [rsi + rdx * 8 + offsetof(...)] test rax, rax Signed-off-by:
-
Thomas Gleixner authored
commit d5421ea4 upstream. The hrtimer interrupt code contains a hang detection and mitigation mechanism, which prevents that a long delayed hrtimer interrupt causes a continous retriggering of interrupts which prevent the system from making progress. If a hang is detected then the timer hardware is programmed with a certain delay into the future and a flag is set in the hrtimer cpu base which prevents newly enqueued timers from reprogramming the timer hardware prior to the chosen delay. The subsequent hrtimer interrupt after the delay clears the flag and resumes normal operation. If such a hang happens in the last hrtimer interrupt before a CPU is unplugged then the hang_detected flag is set and stays that way when the CPU is plugged in again. At that point the timer hardware is not armed and it cannot be armed because the hang_detected flag is still active, so nothing clears that flag. As a consequence the CPU does not receive hrtimer interrupts and no timers expire on that CPU which results in RCU stalls and other malfunctions. Clear the flag along with some other less critical members of the hrtimer cpu base to ensure starting from a clean state when a CPU is plugged in. Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the root cause of that hard to reproduce heisenbug. Once understood it's trivial and certainly justifies a brown paperbag. Fixes: 41d2e494 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Sewior <bigeasy@linutronix.de> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801261447590.2067@nanosSigned-off-by:
-
Jia Zhang authored
commit 7e702d17 upstream. Commit b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") reduced the impact of erratum BDF90 for Broadwell model 79. The impact can be reduced further by checking the size of the last level cache portion per core. Tony: "The erratum says the problem only occurs on the large-cache SKUs. So we only need to avoid the update if we are on a big cache SKU that is also running old microcode." For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. Fixes: b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") Signed-off-by:
Jia Zhang <zhang.jia@linux.alibaba.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.comSigned-off-by:
-
Xiao Liang authored
commit 40d4071c upstream. The AMD power module can be loaded on non AMD platforms, but unload fails with the following Oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: __list_del_entry_valid+0x29/0x90 Call Trace: perf_pmu_unregister+0x25/0xf0 amd_power_pmu_exit+0x1c/0xd23 [power] SyS_delete_module+0x1a8/0x2b0 ? exit_to_usermode_loop+0x8f/0xb0 entry_SYSCALL_64_fastpath+0x20/0x83 Return -ENODEV instead of 0 from the module init function if the CPU does not match. Fixes: c7ab62bf ("perf/x86/amd/power: Add AMD accumulated power reporting mechanism") Signed-off-by:
Xiao Liang <xiliang@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d0c081b4 ] syzbot reported yet another crash [1] that is caused by insufficient validation of DODGY packets. Two bugs are happening here to trigger the crash. 1) Flow dissection leaves with incorrect thoff field. 2) skb_probe_transport_header() sets transport header to this invalid thoff, even if pointing after skb valid data. 3) qdisc_pkt_len_init() reads out-of-bound data because it trusts tcp_hdrlen(skb) Possible fixes : - Full flow dissector validation before injecting bad DODGY packets in the stack. This approach was attempted here : https://patchwork.ozlabs.org/patch/ 861874/ - Have more robust functions in the core. This might be needed anyway for stable versions. This patch fixes the flow dissection issue. [1] CPU: 1 PID: 3144 Comm: syzkaller271204 Not tainted 4.15.0-rc4-mm1+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:355 [inline] kasan_report+0x23b/0x360 mm/kasan/report.c:413 __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:432 __tcp_hdrlen include/linux/tcp.h:35 [inline] tcp_hdrlen include/linux/tcp.h:40 [inline] qdisc_pkt_len_init net/core/dev.c:3160 [inline] __dev_queue_xmit+0x20d3/0x2200 net/core/dev.c:3465 dev_queue_xmit+0x17/0x20 net/core/dev.c:3554 packet_snd net/packet/af_packet.c:2943 [inline] packet_sendmsg+0x3ad5/0x60a0 net/packet/af_packet.c:2968 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 sock_write_iter+0x31a/0x5d0 net/socket.c:907 call_write_iter include/linux/fs.h:1776 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 34fad54c ("net: __skb_flow_dissect() must cap its return value") Fixes: a6e544b0 ("flow_dissector: Jump to exit code in __skb_flow_dissect") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 4df0bfc7 ] tfile->tun could be detached before we close the tun fd, via tun_detach_all(), so it should not be used to check for tfile->tx_array. As Jason suggested, we probably have to clean it up unconditionally both in __tun_deatch() and tun_detach_all(), but this requires to check if it is initialized or not. Currently skb_array_cleanup() doesn't have such a check, so I check it in the caller and introduce a helper function, it is a bit ugly but we can always improve it in net-next. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d986 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Yuval Mintz authored
[ Upstream commit 1ecdaea0 ] Driver periodically samples all neighbors configured in device in order to update the kernel regarding their state. When finding an entry configured in HW that doesn't show in neigh_lookup() driver logs an error message. This introduces a race when removing multiple neighbors - it's possible that a given entry would still be configured in HW as its removal is still being processed but is already removed from the kernel's neighbor tables. Simply remove the error message and gracefully accept such events. Fixes: c723c735 ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by:
Yuval Mintz <yuvalm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 121d57af ] Validate gso_type during segmentation as SKB_GSO_DODGY sources may pass packets where the gso_type does not match the contents. Syzkaller was able to enter the SCTP gso handler with a packet of gso_type SKB_GSO_TCPV4. On entry of transport layer gso handlers, verify that the gso_type matches the transport protocol. Fixes: 90017acc ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Alexey Kodanev authored
[ Upstream commit 128bb975 ] Commit b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") moved dev->mtu initialization from ip6gre_tunnel_setup() to ip6gre_tunnel_init(), as a result, the previously set values, before ndo_init(), are reset in the following cases: * rtnl_create_link() can update dev->mtu from IFLA_MTU parameter. * ip6gre_tnl_link_config() is invoked before ndo_init() in netlink and ioctl setup, so ndo_init() can reset MTU adjustments with the lower device MTU as well, dev->mtu and dev->hard_header_len. Not applicable for ip6gretap because it has one more call to ip6gre_tnl_link_config(tunnel, 1) in ip6gre_tap_init(). Fix the first case by updating dev->mtu with 'tb[IFLA_MTU]' parameter if a user sets it manually on a device creation, and fix the second one by moving ip6gre_tnl_link_config() call after register_netdevice(). Fixes: b05229f4 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Fixes: db2ec95d ("ip6_gre: Fix MTU setting") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by:
-
Ivan Vecera authored
[ Upstream commit 52acf064 ] The commit 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") modified be_update_queues() so the IFACE (HW representation of the netdevice) is destroyed and then re-created. This causes a regression because potential promiscuous mode is not restored properly during be_open() because the driver thinks that the HW has promiscuous mode already enabled. Note that Lancer is not affected by this bug because RX-filter flags are disabled during be_close() for this chipset. Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 62219066 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 0171c418 ] ppp_dev_uninit(), which is the .ndo_uninit() handler of PPP devices, needs to lock pn->all_ppp_mutex. Therefore we mustn't call register_netdevice() with pn->all_ppp_mutex already locked, or we'd deadlock in case register_netdevice() fails and calls .ndo_uninit(). Fortunately, we can unlock pn->all_ppp_mutex before calling register_netdevice(). This lock protects pn->units_idr, which isn't used in the device registration process. However, keeping pn->all_ppp_mutex locked during device registration did ensure that no device in transient state would be published in pn->units_idr. In practice, unlocking it before calling register_netdevice() doesn't change this property: ppp_unit_register() is called with 'ppp_mutex' locked and all searches done in pn->units_idr hold this lock too. Fixes: 8cb775bc ("ppp: fix device unregistration upon netns deletion") Reported-and-tested-by: syzbot+367889b9c9e279219175@syzkaller.appspotmail.com Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Jim Westfall authored
[ Upstream commit cd9ff4de ] Map all lookup neigh keys to INADDR_ANY for loopback/point-to-point devices to avoid making an entry for every remote ip the device needs to talk to. This used the be the old behavior but became broken in a263b309 (ipv4: Make neigh lookups directly in output packet path) and later removed in 0bb4087c (ipv4: Fix neigh lookup keying over loopback/point-to-point devices) because it was broken. Signed-off-by:
Jim Westfall <jwestfall@surrealistic.net> Signed-off-by:
-
Jim Westfall authored
[ Upstream commit 096b9854 ] Use n->primary_key instead of pkey to account for the possibility that a neigh constructor function may have modified the primary_key value. Signed-off-by:
-
Neil Horman authored
[ Upstream commit 848b1598 ] with the introduction of commit b0eb57cb, it appears that rq->buf_info is improperly handled. While it is heap allocated when an rx queue is setup, and freed when torn down, an old line of code in vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0] being set to NULL prior to its being freed, causing a memory leak, which eventually exhausts the system on repeated create/destroy operations (for example, when the mtu of a vmxnet3 interface is changed frequently. Fix is pretty straight forward, just move the NULL set to after the free. Tested by myself with successful results Applies to net, and should likely be queued for stable, please Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: David S. Miller <davem@davemloft.net> Acked-by:
Shrikrishna Khare <skhare@vmware.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 59b36613 ] When tipc_node_find_by_name() fails, the nlmsg is not freed. While on it, switch to a goto label to properly free it. Fixes: be9c086715c ("tipc: narrow down exposure of struct tipc_node") Reported-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit a0ff6600 ] After commit cea0cc80 ("sctp: use the right sk after waking up from wait_buf sleep"), it may change to lock another sk if the asoc has been peeled off in sctp_wait_for_sndbuf. However, the asoc's new sk could be already closed elsewhere, as it's in the sendmsg context of the old sk that can't avoid the new sk's closing. If the sk's last one refcnt is held by this asoc, later on after putting this asoc, the new sk will be freed, while under it's own lock. This patch is to revert that commit, but fix the old issue by returning error under the old sk's lock. Fixes: cea0cc80 ("sctp: use the right sk after waking up from wait_buf sleep") Reported-by: syzbot+ac6ea7baa4432811eb50@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
-
Xin Long authored
[ Upstream commit c5006b8a ] The check in sctp_sockaddr_af is not robust enough to forbid binding a v4mapped v6 addr on a v4 socket. The worse thing is that v4 socket's bind_verify would not convert this v4mapped v6 addr to a v4 addr. syzbot even reported a crash as the v4 socket bound a v6 addr. This patch is to fix it by doing the common sa.sa_family check first, then AF_INET check for v4mapped v6 addrs. Fixes: 7dab83de ("sctp: Support ipv6only AF_INET6 sockets.") Reported-by: syzbot+7b7b518b1228d2743963@syzkaller.appspotmail.com Acked-by:
-
Francois Romieu authored
[ Upstream commit a78e9366 ] Hardware statistics retrieval hurts in tight invocation loops. Avoid extraneous write and enforce strict ordering of writes targeted to the tally counters dump area address registers. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Tested-by:
Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by:
-
