- 09 Aug, 2019 12 commits
-
-
Gustavo A. R. Silva authored
[ Upstream commit ea443e5e ] board is controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/iphase.c:2765 ia_ioctl() warn: potential spectre issue 'ia_dev' [r] (local cap) drivers/atm/iphase.c:2774 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2782 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2816 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2823 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2830 ia_ioctl() warn: potential spectre issue '_ia_dev' [r] (local cap) drivers/atm/iphase.c:2845 ia_ioctl() warn: possible spectre second half. 'iadev' drivers/atm/iphase.c:2856 ia_ioctl() warn: possible spectre second half. 'iadev' Fix this by sanitizing board before using it to index ia_dev and _ia_dev Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Like commit 641114d2 ("RDMA: Directly cast the sockaddr union to sockaddr") we need to quiet gcc 9 from warning about this crazy union. That commit did not fix all of the warnings in 4.19 and older kernels because the logic in roce_resolve_route_from_path() was rewritten between 4.19 and 5.2 when that change happened. Cc: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Sebastian Parschauer authored
commit 49869d2e upstream. The PixArt OEM mice are known for disconnecting every minute in runlevel 1 or 3 if they are not always polled. So add quirk ALWAYS_POLL for this one as well. Jonathan Teh (@jonathan-teh) reported and tested the quirk. Reference: https://github.com/sriemer/fix-linux-mouse/issues/15Signed-off-by:
Sebastian Parschauer <s.parschauer@gmx.de> CC: stable@vger.kernel.org Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Aaron Armstrong Skomra authored
commit 693c3dab upstream. The bit indicating BTN_6 on this device is overshifted by 2 bits, resulting in the incorrect button being reported. Also fix copy-paste mistake in comments. Signed-off-by:
Aaron Armstrong Skomra <aaron.skomra@wacom.com> Reviewed-by:
Ping Cheng <ping.cheng@wacom.com> Link: https://github.com/linuxwacom/xf86-input-wacom/issues/71 Fixes: c7f0522a ("HID: wacom: Slim down wacom_intuos_pad processing") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by:
-
Dan Williams authored
commit ca6bf264 upstream. A multithreaded namespace creation/destruction stress test currently deadlocks with the following lockup signature: INFO: task ndctl:2924 blocked for more than 122 seconds. Tainted: G OE 5.2.0-rc4+ #3382 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ndctl D 0 2924 1176 0x00000000 Call Trace: ? __schedule+0x27e/0x780 schedule+0x30/0xb0 wait_nvdimm_bus_probe_idle+0x8a/0xd0 [libnvdimm] ? finish_wait+0x80/0x80 uuid_store+0xe6/0x2e0 [libnvdimm] kernfs_fop_write+0xf0/0x1a0 vfs_write+0xb7/0x1b0 ksys_write+0x5c/0xd0 do_syscall_64+0x60/0x240 INFO: task ndctl:2923 blocked for more than 122 seconds. Tainted: G OE 5.2.0-rc4+ #3382 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ndctl D 0 2923 1175 0x00000000 Call Trace: ? __schedule+0x27e/0x780 ? __mutex_lock+0x489/0x910 schedule+0x30/0xb0 schedule_preempt_disabled+0x11/0x20 __mutex_lock+0x48e/0x910 ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] ? __lock_acquire+0x23f/0x1710 ? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm] __dax_pmem_probe+0x5e/0x210 [dax_pmem_core] ? nvdimm_bus_probe+0x1d0/0x2c0 [libnvdimm] dax_pmem_probe+0xc/0x20 [dax_pmem] nvdimm_bus_probe+0x90/0x2c0 [libnvdimm] really_probe+0xef/0x390 driver_probe_device+0xb4/0x100 In this sequence an 'nd_dax' device is being probed and trying to take the lock on its backing namespace to validate that the 'nd_dax' device indeed has exclusive access to the backing namespace. Meanwhile, another thread is trying to update the uuid property of that same backing namespace. So one thread is in the probe path trying to acquire the lock, and the other thread has acquired the lock and tries to flush the probe path. Fix this deadlock by not holding the namespace device_lock over the wait_nvdimm_bus_probe_idle() synchronization step. In turn this requires the device_lock to be held on entry to wait_nvdimm_bus_probe_idle() and subsequently dropped internally to wait_nvdimm_bus_probe_idle(). Cc: <stable@vger.kernel.org> Fixes: bf9bccc1 ("libnvdimm: pmem label sets and namespace instantiation") Cc: Vishal Verma <vishal.l.verma@intel.com> Tested-by:
Jane Chu <jane.chu@oracle.com> Link: https://lore.kernel.org/r/156341210094.292348.2384694131126767789.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Williams authored
commit 6de5d06e upstream. In preparation for not holding a lock over the execution of nd_ioctl(), update the implementation to allow multiple threads to be attempting ioctls at the same time. The bus lock still prevents multiple in-flight ->ndctl() invocations from corrupting each other's state, but static global staging buffers are moved to the heap. Reported-by:
Vishal Verma <vishal.l.verma@intel.com> Reviewed-by:
-
Dan Williams authored
commit 700cd033 upstream. Namespace activation expects to be able to reference region badblocks. The following warning sometimes triggers when asynchronous namespace activation races in front of the completion of namespace probing. Move all possible namespace probing after region badblocks initialization. Otherwise, lockdep sometimes catches the uninitialized state of the badblocks seqlock with stack trace signatures like: INFO: trying to register non-static key. pmem2: detected capacity change from 0 to 136365211648 the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 9 PID: 358 Comm: kworker/u80:5 Tainted: G OE 5.2.0-rc4+ #3382 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Workqueue: events_unbound async_run_entry_fn Call Trace: dump_stack+0x85/0xc0 pmem1.12: detected capacity change from 0 to 8589934592 register_lock_class+0x56a/0x570 ? check_object+0x140/0x270 __lock_acquire+0x80/0x1710 ? __mutex_lock+0x39d/0x910 lock_acquire+0x9e/0x180 ? nd_pfn_validate+0x28f/0x440 [libnvdimm] badblocks_check+0x93/0x1f0 ? nd_pfn_validate+0x28f/0x440 [libnvdimm] nd_pfn_validate+0x28f/0x440 [libnvdimm] ? lockdep_hardirqs_on+0xf0/0x180 nd_dax_probe+0x9a/0x120 [libnvdimm] nd_pmem_probe+0x6d/0x180 [nd_pmem] nvdimm_bus_probe+0x90/0x2c0 [libnvdimm] Fixes: 48af2f7e ("libnvdimm, pfn: during init, clear errors...") Cc: <stable@vger.kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by:
-
Dan Williams authored
commit 8aac0e23 upstream. A multithreaded namespace creation/destruction stress test currently fails with signatures like the following: sysfs group 'power' not found for kobject 'dax1.1' RIP: 0010:sysfs_remove_group+0x76/0x80 Call Trace: device_del+0x73/0x370 device_unregister+0x16/0x50 nd_async_device_unregister+0x1e/0x30 [libnvdimm] async_run_entry_fn+0x39/0x160 process_one_work+0x23c/0x5e0 worker_thread+0x3c/0x390 BUG: kernel NULL pointer dereference, address: 0000000000000020 RIP: 0010:klist_put+0x1b/0x6c Call Trace: klist_del+0xe/0x10 device_del+0x8a/0x2c9 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 device_unregister+0x44/0x4f nd_async_device_unregister+0x22/0x2d [libnvdimm] async_run_entry_fn+0x47/0x15a process_one_work+0x1a2/0x2eb worker_thread+0x1b8/0x26e Use the kill_device() helper to atomically resolve the race of multiple threads issuing kill, device_unregister(), requests. Reported-by:
Erwin Tsaur <erwin.tsaur@oracle.com> Fixes: 4d88a97a ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...") Cc: <stable@vger.kernel.org> Link: https://github.com/pmem/ndctl/issues/96Tested-by:
-
Dan Williams authored
commit 00289cd8 upstream. The libnvdimm subsystem arranges for devices to be destroyed as a result of a sysfs operation. Since device_unregister() cannot be called from an actively running sysfs attribute of the same device libnvdimm arranges for device_unregister() to be performed in an out-of-line async context. The driver core maintains a 'dead' state for coordinating its own racing async registration / de-registration requests. Rather than add local 'dead' state tracking infrastructure to libnvdimm device objects, export the existing state tracking via a new kill_device() helper. The kill_device() helper simply marks the device as dead, i.e. that it is on its way to device_del(), or returns that the device was already dead. This can be used in advance of calling device_unregister() for subsystems like libnvdimm that might need to handle multiple user threads racing to delete a device. This refactoring does not change any behavior, but it is a pre-requisite for follow-on fixes and therefore marked for -stable. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Fixes: 4d88a97a ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...") Cc: <stable@vger.kernel.org> Tested-by:
-
Alexander Duyck authored
commit 3451a495 upstream. Add an additional bit flag to the device_private struct named "dead". This additional flag provides a guarantee that when a device_del is executed on a given interface an async worker will not attempt to attach the driver following the earlier device_del call. Previously this guarantee was not present and could result in the device_del call attempting to remove a driver from an interface only to have the async worker attempt to probe the driver later when it finally completes the asynchronous probe call. One additional change added was that I pulled the check for dev->driver out of the __device_attach_driver call and instead placed it in the __device_attach_async_helper call. This was motivated by the fact that the only other caller of this, __device_attach, had already taken the device_lock() and checked for dev->driver. Instead of testing for this twice in this path it makes more sense to just consolidate the dev->dead and dev->driver checks together into one set of checks. Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
-
Linus Torvalds authored
commit cf676908 upstream. I'm not sure what made gcc warn about this code now. The 'ret' variable does end up initialized in all cases, but it's definitely not obvious, so the compiler is quite reasonable to warn about this. So just add initialization to make it all much more obvious both to compilers and to humans. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hannes Reinecke authored
commit 023358b1 upstream. Gcc-9 complains for a memset across pointer boundaries, which happens as the code tries to allocate a flexible array on the stack. Turns out we cannot do this without relying on gcc-isms, so with this patch we'll embed the fc_rport_priv structure into fcoe_rport, can use the normal 'container_of' outcast, and will only have to do a memset over one structure. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
- 06 Aug, 2019 28 commits
-
-
Greg Kroah-Hartman authored
-
Josh Poimboeuf authored
commit 4c920576 upstream Add documentation to the Spectre document about the new swapgs variant of Spectre v1. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Thomas Gleixner authored
commit f36cf386 upstream Intel provided the following information: On all current Atom processors, instructions that use a segment register value (e.g. a load or store) will not speculatively execute before the last writer of that segment retires. Thus they will not use a speculatively written segment value. That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS entry paths can be excluded from the extra LFENCE if PTI is disabled. Create a separate bug flag for the through SWAPGS speculation and mark all out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs are excluded from the whole mitigation mess anyway. Reported-by:
Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Reviewed-by:
-
Josh Poimboeuf authored
commit 64dbc122 upstream Somehow the swapgs mitigation entry code patch ended up with a JMPQ instruction instead of JMP, where only the short jump is needed. Some assembler versions apparently fail to optimize JMPQ into a two-byte JMP when possible, instead always using a 7-byte JMP with relocation. For some reason that makes the entry code explode with a #GP during boot. Change it back to "JMP" as originally intended. Fixes: 18ec54fd ("x86/speculation: Prepare entry code for Spectre v1 swapgs mitigations") Signed-off-by:
-
Josh Poimboeuf authored
commit a2059825 upstream The previous commit added macro calls in the entry code which mitigate the Spectre v1 swapgs issue if the X86_FEATURE_FENCE_SWAPGS_* features are enabled. Enable those features where applicable. The mitigations may be disabled with "nospectre_v1" or "mitigations=off". There are different features which can affect the risk of attack: - When FSGSBASE is enabled, unprivileged users are able to place any value in GS, using the wrgsbase instruction. This means they can write a GS value which points to any value in kernel space, which can be useful with the following gadget in an interrupt/exception/NMI handler: if (coming from user space) swapgs mov %gs:<percpu_offset>, %reg1 // dependent load or store based on the value of %reg // for example: mov %(reg1), %reg2 If an interrupt is coming from user space, and the entry code speculatively skips the swapgs (due to user branch mistraining), it may speculatively execute the GS-based load and a subsequent dependent load or store, exposing the kernel data to an L1 side channel leak. Note that, on Intel, a similar attack exists in the above gadget when coming from kernel space, if the swapgs gets speculatively executed to switch back to the user GS. On AMD, this variant isn't possible because swapgs is serializing with respect to future GS-based accesses. NOTE: The FSGSBASE patch set hasn't been merged yet, so the above case doesn't exist quite yet. - When FSGSBASE is disabled, the issue is mitigated somewhat because unprivileged users must use prctl(ARCH_SET_GS) to set GS, which restricts GS values to user space addresses only. That means the gadget would need an additional step, since the target kernel address needs to be read from user space first. Something like: if (coming from user space) swapgs mov %gs:<percpu_offset>, %reg1 mov (%reg1), %reg2 // dependent load or store based on the value of %reg2 // for example: mov %(reg2), %reg3 It's difficult to audit for this gadget in all the handlers, so while there are no known instances of it, it's entirely possible that it exists somewhere (or could be introduced in the future). Without tooling to analyze all such code paths, consider it vulnerable. Effects of SMAP on the !FSGSBASE case: - If SMAP is enabled, and the CPU reports RDCL_NO (i.e., not susceptible to Meltdown), the kernel is prevented from speculatively reading user space memory, even L1 cached values. This effectively disables the !FSGSBASE attack vector. - If SMAP is enabled, but the CPU *is* susceptible to Meltdown, SMAP still prevents the kernel from speculatively reading user space memory. But it does *not* prevent the kernel from reading the user value from L1, if it has already been cached. This is probably only a small hurdle for an attacker to overcome. Thanks to Dave Hansen for contributing the speculative_smap() function. Thanks to Andrew Cooper for providing the inside scoop on whether swapgs is serializing on AMD. [ tglx: Fixed the USER fence decision and polished the comment as suggested by Dave Hansen ] Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 18ec54fd upstream Spectre v1 isn't only about array bounds checks. It can affect any conditional checks. The kernel entry code interrupt, exception, and NMI handlers all have conditional swapgs checks. Those may be problematic in the context of Spectre v1, as kernel code can speculatively run with a user GS. For example: if (coming from user space) swapgs mov %gs:<percpu_offset>, %reg mov (%reg), %reg1 When coming from user space, the CPU can speculatively skip the swapgs, and then do a speculative percpu load using the user GS value. So the user can speculatively force a read of any kernel value. If a gadget exists which uses the percpu value as an address in another load/store, then the contents of the kernel value may become visible via an L1 side channel attack. A similar attack exists when coming from kernel space. The CPU can speculatively do the swapgs, causing the user GS to get used for the rest of the speculative window. The mitigation is similar to a traditional Spectre v1 mitigation, except: a) index masking isn't possible; because the index (percpu offset) isn't user-controlled; and b) an lfence is needed in both the "from user" swapgs path and the "from kernel" non-swapgs path (because of the two attacks described above). The user entry swapgs paths already have SWITCH_TO_KERNEL_CR3, which has a CR3 write when PTI is enabled. Since CR3 writes are serializing, the lfences can be skipped in those cases. On the other hand, the kernel entry swapgs paths don't depend on PTI. To avoid unnecessary lfences for the user entry case, create two separate features for alternative patching: X86_FEATURE_FENCE_SWAPGS_USER X86_FEATURE_FENCE_SWAPGS_KERNEL Use these features in entry code to patch in lfences where needed. The features aren't enabled yet, so there's no functional change. Signed-off-by:
-
Fenghua Yu authored
commit acec0ce0 upstream It's a waste for the four X86_FEATURE_CQM_* feature bits to occupy two whole feature bits words. To better utilize feature words, re-define word 11 to host scattered features and move the four X86_FEATURE_CQM_* features into Linux defined word 11. More scattered features can be added in word 11 in the future. Rename leaf 11 in cpuid_leafs to CPUID_LNX_4 to reflect it's a Linux-defined leaf. Rename leaf 12 as CPUID_DUMMY which will be replaced by a meaningful name in the next patch when CPUID.7.1:EAX occupies world 12. Maximum number of RMID and cache occupancy scale are retrieved from CPUID.0xf.1 after scattered CQM features are enumerated. Carve out the code into a separate function. KVM doesn't support resctrl now. So it's safe to move the X86_FEATURE_CQM_* features to scattered features word 11 for KVM. Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Borislav Petkov authored
commit 45fc56e6 upstream ... into a separate function for better readability. Split out from a patch from Fenghua Yu <fenghua.yu@intel.com> to keep the mechanical, sole code movement separate for easy review. No functional changes. Signed-off-by:
-
Suganath Prabu authored
commit df9a6061 upstream. Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as per hardware design, if DMA-able range contains all 64-bits set (0xFFFFFFFF-FFFFFFFF) then it results in a firmware fault. E.g. SGE's start address is 0xFFFFFFFF-FFFF000 and data length is 0x1000 bytes. when HBA tries to DMA the data at 0xFFFFFFFF-FFFFFFFF location then HBA will fault the firmware. Driver will set 63-bit DMA mask to ensure the above address will not be used. Cc: <stable@vger.kernel.org> # 4.19.63 Signed-off-by:
Suganath Prabu <suganath-prabu.subramani@broadcom.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Andy Lutomirski authored
commit ff17bbe0 upstream. GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock pages before the vclock mode checks. This creates a path through vclock_gettime() in which no vclock is enabled at all (due to disabled TSC on old CPUs, for example) but the pvclock or hvclock page nevertheless read. This will segfault on bare metal. This fixes commit 459e3a21 ("gcc-9: properly declare the {pv,hv}clock_page storage") in the sense that, before that commit, GCC didn't seem to generate the offending code. There was nothing wrong with that commit per se, and -stable maintainers should backport this to all supported kernels regardless of whether the offending commit was present, since the same crash could just as easily be triggered by the phase of the moon. On GCC 9.1.1, this doesn't seem to affect the generated code at all, so I'm not too concerned about performance regressions from this fix. Cc: stable@vger.kernel.org Cc: x86@kernel.org Cc: Borislav Petkov <bp@alien8.de> Reported-by:
Duncan Roe <duncan_roe@optusnet.com.au> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit 459e3a21 upstream. The pvlock_page and hvclock_page variables are (as the name implies) addresses to pages, created by the linker script. But we declared them as just "extern u8" variables, which _works_, but now that gcc does some more bounds checking, it causes warnings like warning: array subscript 1 is outside array bounds of ‘u8[1]’ when we then access more than one byte from those variables. Fix this by simply making the declaration of the variables match reality, which makes the compiler happy too. Signed-off-by:
-
Josh Poimboeuf authored
commit bcb6fb5d upstream. Starting with GCC 8, a lot of unlikely code was moved out of line to "cold" subfunctions in .text.unlikely. For example, the unlikely bits of: irq_do_set_affinity() are moved out to the following subfunction: irq_do_set_affinity.cold.49() Starting with GCC 9, the numbered suffix has been removed. So in the above example, the cold subfunction is instead: irq_do_set_affinity.cold() Tweak the objtool subfunction detection logic so that it detects both GCC 8 and GCC 9 naming schemes. Reported-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
-
Eugeniy Paltsev authored
commit 493a2f81 upstream. After reworking U-boot args handling code and adding paranoid arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and enable uboot support unconditionally. For JTAG case we can assume that core registers will come up reset value of 0 or in worst case we rely on user passing '-on=clear_regs' to Metaware debugger. Cc: stable@vger.kernel.org Tested-by:
Corentin LABBE <clabbe@baylibre.com> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Jean Delvare authored
commit 25e5ef30 upstream. The integration of the at24 driver into the nvmem framework broke the world-readability of spd EEPROMs. Fix it. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org Fixes: 57d15550 ("eeprom: at24: extend driver to plug into the NVMEM framework") Cc: Andrew Lunn <andrew@lunn.ch> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> [Bartosz: backported to v4.19.y] Signed-off-by:
-
Xiaolin Zhang authored
commit 7366aeb7 upstream. GPU hang observed during the guest OCL conformance test which is caused by THP GTT feature used durning the test. It was observed the same GFN with different size (4K and 2M) requested from the guest in GVT. So during the guest page dma map stage, it is required to unmap first with orginal size and then remap again with requested size. Fixes: b901b252 ("drm/i915/gvt: Add 2M huge gtt support") Cc: stable@vger.kernel.org Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Xiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by:
-
John Fleck authored
commit cd48a820 upstream. The call to alloc_rsm_map_table does not check if the kmalloc fails. Check for a NULL on alloc, and bail if it fails. Fixes: 372cc85a ("IB/hfi1: Extract RSM map table init from QOS") Link: https://lore.kernel.org/r/20190715164521.74174.27047.stgit@awfm-01.aw.intel.com Cc: <stable@vger.kernel.org> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
John Fleck <john.fleck@intel.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
commit b7165bd0 upstream. The specification for the Toeplitz function doesn't require to set the key explicitly to be symmetric. In case a symmetric functionality is required a symmetric key can be simply used. Wrongly forcing the algorithm to symmetric causes the wrong packet distribution and a performance degradation. Link: https://lore.kernel.org/r/20190723065733.4899-7-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.7 Fixes: 28d61370 ("IB/mlx5: Add RSS QP support") Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Reviewed-by:
Alex Vainman <alexv@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
commit b9332dad upstream. Any dma map underlying the MR should only be freed once the MR is fenced at the hardware. As of the above we first destroy the MKEY and just after that can safely call to dma_unmap_single(). Link: https://lore.kernel.org/r/20190723065733.4899-6-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.3 Fixes: 8a187ee5 ("IB/mlx5: Support the new memory registration API") Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
commit 9ec4483a upstream. Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which can't be accessed by userspace. This ensures that nothing can continue to access the MR once it has been placed in the kernels cache for reuse. MRs in the cache continue to have their HW state, including DMA tables, present. Even though the MR has been invalidated, changing the PD provides an additional layer of protection against use of the MR. Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org Cc: <stable@vger.kernel.org> # 3.10 Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
-
Yishai Hadas authored
commit afd14174 upstream. Use a direct firmware command to destroy the mkey in case the unreg UMR operation has failed. This prevents a case that a mkey will leak out from the cache post a failure to be destroyed by a UMR WR. In case the MR cache limit didn't reach a call to add another entry to the cache instead of the destroyed one is issued. In addition, replaced a warn message to WARN_ON() as this flow is fatal and can't happen unless some bug around. Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org Cc: <stable@vger.kernel.org> # 4.10 Fixes: 49780d42 ("IB/mlx5: Expose MR cache for mlx5_ib") Signed-off-by:
-
Yishai Hadas authored
commit 6a053953 upstream. Fix unreg_umr to ignore the mkey state and do not fail if was freed. This prevents a case that a user space application already changed the mkey state to free and then the UMR operation will fail leaving the mkey in an inappropriate state. Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org Cc: <stable@vger.kernel.org> # 3.19 Fixes: 968e78dd ("IB/mlx5: Enhance UMR support to allow partial page table update") Signed-off-by:
-
Juergen Gross authored
commit 50f6393f upstream. The condition in xen_swiotlb_free_coherent() for deciding whether to call xen_destroy_contiguous_region() is wrong: in case the region to be freed is not contiguous calling xen_destroy_contiguous_region() is the wrong thing to do: it would result in inconsistent mappings of multiple PFNs to the same MFN. This will lead to various strange crashes or data corruption. Instead of calling xen_destroy_contiguous_region() in that case a warning should be issued as that situation should never occur. Cc: stable@vger.kernel.org Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Munehisa Kamata authored
commit 2b5c8f00 upstream. Commit abbbdf12 ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc0 ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc0 ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Munehisa Kamata <kamatam@amazon.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Will Deacon authored
commit 147b9635 upstream. If CTR_EL0.{CWG,ERG} are 0b0000 then they must be interpreted to have their architecturally maximum values, which defeats the use of FTR_HIGHER_SAFE when sanitising CPU ID registers on heterogeneous machines. Introduce FTR_HIGHER_OR_ZERO_SAFE so that these fields effectively saturate at zero. Fixes: 3c739b57 ("arm64: Keep track of CPU feature registers") Cc: <stable@vger.kernel.org> # 4.4.x- Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
commit 849adec4 upstream. Commit d968d2b8 ("ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses") changed the validation requirements for hardware watchpoints on arch/arm/. Update our compat layer to implement the same relaxation. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Will Deacon authored
commit 0d7fd70f upstream. Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM notifier code incorrectly skips restoration of the counters. Fix the logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT. Cc: <stable@vger.kernel.org> Fixes: da4e4f18 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Reported-by:
Anders Roxell <anders.roxell@linaro.org> Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Helge Deller authored
commit 3fe6c873 upstream. With debug info enabled (CONFIG_DEBUG_INFO=y) the resulting vmlinux may get that huge that we need to increase the start addresss for the decompression text section otherwise one will face a linker error. Reported-by:
Sven Schnelle <svens@stackframe.org> Tested-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Chris Down authored
commit b59b1baa upstream. On my laptop most memcg kselftests were being skipped because it claimed cgroup v2 hierarchy wasn't mounted, but this isn't correct. Instead, it seems current systemd HEAD mounts it with the name "cgroup2" instead of "cgroup": % grep cgroup /proc/mounts cgroup2 /sys/fs/cgroup cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate 0 0 I can't think of a reason to need to check fs_spec explicitly since it's arbitrary, so we can just rely on fs_vfstype. After these changes, `make TARGETS=cgroup kselftest` actually runs the cgroup v2 tests in more cases. Link: http://lkml.kernel.org/r/20190723210737.GA487@chrisdown.nameSigned-off-by:
Chris Down <chris@chrisdown.name> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
