- 28 Jan, 2014 40 commits
-
-
Wang Shilong authored
Just wrap same code into one function scrub_blocked_if_needed(). This make a change that we will move waiting (@workers_pending = 0) before we can wake up commiting transaction(atomic_inc(@scrub_paused)), we must take carefully to not deadlock here. Thread 1 Thread 2 |->btrfs_commit_transaction() |->set trans type(COMMIT_DOING) |->btrfs_scrub_paused()(blocked) |->join_transaction(blocked) Move btrfs_scrub_paused() before setting trans type which means we can still join a transaction when commiting_transaction is blocked. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Suggested-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Wang Shilong authored
We came a race condition when scrubbing superblocks, the story is: In commiting transaction, we will update @last_trans_commited after writting superblocks, if scrubber start after writting superblocks and before updating @last_trans_commited, generation mismatch happens! We fix this by checking @scrub_pause_req, and we won't start a srubber until commiting transaction is finished.(after btrfs_scrub_continue() finished.) Reported-by:
Sebastian Ochmann <ochmann@informatik.uni-bonn.de> Signed-off-by:
-
Filipe David Borba Manana authored
fs/btrfs/send.c:2190:9: warning: incorrect type in argument 3 (different base types) fs/btrfs/send.c:2190:9: expected unsigned long long [unsigned] [usertype] value fs/btrfs/send.c:2190:9: got restricted __le64 [usertype] ctransid fs/btrfs/send.c:2195:17: warning: incorrect type in argument 3 (different base types) fs/btrfs/send.c:2195:17: expected unsigned long long [unsigned] [usertype] value fs/btrfs/send.c:2195:17: got restricted __le64 [usertype] ctransid fs/btrfs/send.c:3716:9: warning: incorrect type in argument 3 (different base types) fs/btrfs/send.c:3716:9: expected unsigned long long [unsigned] [usertype] value fs/btrfs/send.c:3716:9: got restricted __le64 [usertype] ctransid Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Filipe David Borba Manana authored
When merging an extent_map with its right neighbor, increment its block_len with the neighbor's block_len. Signed-off-by:
-
Michal Nazarewicz authored
[commit 8185554d: fix incorrect inode acl reset] introduced a dead code by adding a condition which can never be true to an else branch. The condition can never be true because it is already checked by a previous if statement which causes function to return. Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Reviewed-By:
-
Filipe David Borba Manana authored
We were accounting for sizeof(struct btrfs_item) twice, once in the data_size variable and another time in the if statement below. Signed-off-by:
-
Filipe David Borba Manana authored
Currently we do 2 traversals of an inode's extent_io_tree before inserting an extent state structure: 1 to see if a matching extent state already exists and 1 to do the insertion if the fist traversal didn't found such extent state. This change just combines those tree traversals into a single one. While running sysbench tests (random writes) I captured the number of elements in extent_io_tree trees for a while (into a procfs file backed by a seq_list from seq_file module) and got this histogram: Count: 9310 Range: 51.000 - 21386.000; Mean: 11785.243; Median: 18743.500; Stddev: 8923.688 Percentiles: 90th: 20985.000; 95th: 21155.000; 99th: 21369.000 51.000 - 93.933: 693 ######## 93.933 - 172.314: 938 ########## 172.314 - 315.408: 856 ######### 315.408 - 576.646: 95 # 576.646 - 6415.830: 888 ########## 6415.830 - 11713.809: 1024 ########### 11713.809 - 21386.000: 4816 ##################################################### So traversing such trees can take some significant time that can easily be avoided. Ran the following sysbench tests, 5 times each, for sequential and random writes, and got the following results: sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=seqwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync sysbench --test=fileio --file-num=1 --file-total-size=2G \ --file-test-mode=rndwr --num-threads=16 --file-block-size=65536 \ --max-requests=0 --max-time=60 --file-io-mode=sync Before this change: sequential writes: 69.28Mb/sec (average of 5 runs) random writes: 4.14Mb/sec (average of 5 runs) After this change: sequential writes: 69.91Mb/sec (average of 5 runs) random writes: 5.69Mb/sec (average of 5 runs) Signed-off-by: -
Filipe David Borba Manana authored
When we didn't find a matching extent state, we inserted a new one but didn't cache it in the **cached_state parameter, which makes a subsequent call do a tree lookup to get it. Signed-off-by:
-
Filipe David Borba Manana authored
Before this change, adding an extent map to the extent map tree of an inode required 2 tree nevigations: 1) doing a tree navigation to search for an existing extent map starting at the same offset or an extent map that overlaps the extent map we want to insert; 2) Another tree navigation to add the extent map to the tree (if the former tree search didn't found anything). This change just merges these 2 steps into a single one. While running first few btrfs xfstests I had noticed these trees easily had a few hundred elements, and then with the following sysbench test it reached over 1100 elements very often. Test: sysbench --test=fileio --file-num=32 --file-total-size=10G \ --file-test-mode=seqwr --num-threads=512 --file-block-size=8192 \ --max-requests=1000000 --file-io-mode=sync [prepare|run] (fs created with mkfs.btrfs -l 4096 -f /dev/sdb3 before each sysbench prepare phase) Before this patch: run 1 - 41.894Mb/sec run 2 - 40.527Mb/sec run 3 - 40.922Mb/sec run 4 - 49.433Mb/sec run 5 - 40.959Mb/sec average - 42.75Mb/sec After this patch: run 1 - 48.036Mb/sec run 2 - 50.21Mb/sec run 3 - 50.929Mb/sec run 4 - 46.881Mb/sec run 5 - 53.192Mb/sec average - 49.85Mb/sec Signed-off-by: -
Filipe David Borba Manana authored
Signed-off-by:
-
Filipe David Borba Manana authored
When attempting to move items from our target leaf to its neighbor leaves (right and left), we only need to free data_size - free_space bytes from our leaf in order to add the new item (which has size of data_size bytes). Therefore attempt to move items to the right and left leaves if they have at least data_size - free_space bytes free, instead of data_size bytes free. After 5 runs of the following test, I got a smaller number of btree node splits overall: sysbench --test=fileio --file-num=512 --file-total-size=5G \ --file-test-mode=seqwr --num-threads=512 \ --file-block-size=8192 --max-requests=100000 --file-io-mode=sync Before this change: * 6171 splits (average of 5 test runs) * 61.508Mb/sec of throughput (average of 5 test runs) After this change: * 6036 splits (average of 5 test runs) * 63.533Mb/sec of throughput (average of 5 test runs) An ideal test would not just have multiple threads/processes writing to a file (insertion of file extent items) but also do other operations that result in insertion of items with varied sizes, like file/directory creations, creation of links, symlinks, xattrs, etc. Signed-off-by:
-
Filipe David Borba Manana authored
After an ordered extent completes, don't blindly reset the inode's ordered tree last accessed ordered extent pointer. While running the xfstests I noticed that about 29% of the time the ordered extent to which tree->last pointed was not the same as our just completed ordered extent. After that I ran the following sysbench test (after a prepare phase) and noticed that about 68% of the time tree->last pointed to a different ordered extent too. sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=rndwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --max-requests=0 run Therefore reset tree->last on ordered extent removal only if it pointed to the ordered extent we're removing from the tree. Results from 4 runs of the following test before and after applying this patch: $ sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=seqwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --file-io-mode=sync prepare $ sysbench --test=fileio --file-num=32 --file-total-size=4G \ --file-test-mode=seqwr --num-threads=512 \ --file-block-size=32768 --max-time=60 --file-io-mode=sync run Before this path: run 1 - 64.049Mb/sec run 2 - 63.455Mb/sec run 3 - 64.656Mb/sec run 4 - 63.833Mb/sec After this patch: run 1 - 66.149Mb/sec run 2 - 68.459Mb/sec run 3 - 66.338Mb/sec run 4 - 66.176Mb/sec With random writes (--file-test-mode=rndwr) I had huge fluctuations on the results (+- 35% easily). Signed-off-by: -
Jeff Mahoney authored
Filipe noticed that we were leaking the features attribute group after umount. His fix of just calling sysfs_remove_group() wasn't enough since that removes just the supported features and not the unsupported features. This patch changes the unknown feature handling to add them individually so we can skip the kmalloc and uses the same iteration to tear them down later. We also fix the error handling during mount so that we catch the failing creation of the per-super kobject, and handle proper teardown of a half-setup sysfs context. Tested properly with kmemleak enabled this time. Reported-by:
Jeff Mahoney <jeffm@suse.com> Tested-by:
-
Jeff Mahoney authored
This patch fixes the following warnings: fs/btrfs/extent-tree.c:6201:12: sparse: symbol 'get_raid_name' was not declared. Should it be static? fs/btrfs/extent-tree.c:8430:9: error: format not a string literal and no format arguments [-Werror=format-security] get_raid_name(index)); Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Filipe David Borba Manana authored
The inode eviction can be very slow, because during eviction we tell the VFS to truncate all of the inode's pages. This results in calls to btrfs_invalidatepage() which in turn does calls to lock_extent_bits() and clear_extent_bit(). These calls result in too many merges and splits of extent_state structures, which consume a lot of time and cpu when the inode has many pages. In some scenarios I have experienced umount times higher than 15 minutes, even when there's no pending IO (after a btrfs fs sync). A quick way to reproduce this issue: $ mkfs.btrfs -f /dev/sdb3 $ mount /dev/sdb3 /mnt/btrfs $ cd /mnt/btrfs $ sysbench --test=fileio --file-num=128 --file-total-size=16G \ --file-test-mode=seqwr --num-threads=128 \ --file-block-size=16384 --max-time=60 --max-requests=0 run $ time btrfs fi sync . FSSync '.' real 0m25.457s user 0m0.000s sys 0m0.092s $ cd .. $ time umount /mnt/btrfs real 1m38.234s user 0m0.000s sys 1m25.760s The same test on ext4 runs much faster: $ mkfs.ext4 /dev/sdb3 $ mount /dev/sdb3 /mnt/ext4 $ cd /mnt/ext4 $ sysbench --test=fileio --file-num=128 --file-total-size=16G \ --file-test-mode=seqwr --num-threads=128 \ --file-block-size=16384 --max-time=60 --max-requests=0 run $ sync $ cd .. $ time umount /mnt/ext4 real 0m3.626s user 0m0.004s sys 0m3.012s After this patch, the unmount (inode evictions) is much faster: $ mkfs.btrfs -f /dev/sdb3 $ mount /dev/sdb3 /mnt/btrfs $ cd /mnt/btrfs $ sysbench --test=fileio --file-num=128 --file-total-size=16G \ --file-test-mode=seqwr --num-threads=128 \ --file-block-size=16384 --max-time=60 --max-requests=0 run $ time btrfs fi sync . FSSync '.' real 0m26.774s user 0m0.000s sys 0m0.084s $ cd .. $ time umount /mnt/btrfs real 0m1.811s user 0m0.000s sys 0m1.564s Signed-off-by: -
Wang Shilong authored
We hit a forever loop when doing balance relocation,the reason is that we firstly reserve 4M(node size is 16k).and within transaction we will try to add extra reservation for snapshot roots,this will return -EAGAIN if there has been a thread flushing space to reserve space.We will do this again and again with filesystem becoming nearly full. If the above '-EAGAIN' case happens, we try to refill reservation more outsize of transaction, and this will return eariler in enospc case,however, this dosen't really hurt because it makes no sense doing balance relocation with the filesystem nearly full. Miao Xie helped a lot to track this issue, thanks. Signed-off-by:
-
Filipe David Borba Manana authored
If the ordered extent's last byte was 1 less than our region's start byte, we would unnecessarily wait for the completion of that ordered extent, because it doesn't intersect our target range. Signed-off-by:
-
Miao Xie authored
When we ran sysbench on the fs with compression, the following WARN_ONs were triggered: fs/btrfs/inode.c:7829 WARN_ON(BTRFS_I(inode)->outstanding_extents); fs/btrfs/inode.c:7830 WARN_ON(BTRFS_I(inode)->reserved_extents); fs/btrfs/inode.c:7832 WARN_ON(BTRFS_I(inode)->csum_bytes); Steps to reproduce: # mkfs.btrfs -f <dev> # mount -o compress <dev> <mnt> # cd <mnt> # sysbench --test=fileio --num-threads=8 --file-total-size=8G \ > --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \ > --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \ > --file-test-mode=sync prepare # cd - # umount <mnt> # mount -o compress <dev> <mnt> # cd <mnt> # sysbench --test=fileio --num-threads=8 --file-total-size=8G \ > --file-block-size=32K --file-io-mode=rndwr --file-fsync-freq=0 \ > --file-fsync-end=no --max-requests=300000 --file-extra-flags=direct \ > --file-test-mode=sync run # cd - # umount <mnt> The reason of this problem is: Task0 Task1 btrfs_direct_IO unlock(&inode->i_mutex) lock(&inode->i_mutex) reserve_space() prepare_pages() lock_extent() clear_extent() unlock_extent() lock_extent() test_extent(uptodate) return false copy_data() set_delalloc_extent() extent need compress go back to buffered write clear_extent(DELALLOC | DIRTY) unlock_extent() Task 0 and 1 wrote the same place, and task0 cleared the delalloc flag which was set by task1, it made the dirty pages in that extents couldn't be flushed into the disk, so the reserved space for that extent was not released at the end. This patch fixes the above bug by unlocking the extent after the delalloc. Signed-off-by: -
Miao Xie authored
- the caller has gotten the inode object, needn't pass the file object. And if so, we needn't define a inode pointer variant. - the position should be aligned by the page size not sector size, so we also needn't pass the root object into prepare_pages(). Signed-off-by:
-
David Sterba authored
We don't need to crash hard here, it's just reading a sysfs file. The values considered in switch are from a fixed set, the default case should not happen at all. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
David Sterba authored
Added in patch "btrfs: add ability to change features via sysfs", modifications to superblock don't need to reserve metadata blocks when starting a transaction. Signed-off-by:
-
Frank Holton authored
The kernel macro pr_debug is defined as a empty statement when DEBUG is not defined. Make btrfs_debug match pr_debug to avoid spamming the kernel log with debug messages Signed-off-by:
Frank Holton <fholton@gmail.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
-
Sergei Trofimovich authored
Found by uselex.rb: > btrfs_get_inode_ref_index: [R]: exported from: fs/btrfs/inode-item.o fs/btrfs/btrfs.o fs/btrfs/built-in.o Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Reviewed-by:
-
Liu Bo authored
Flag BTRFS_ORDERED_TRUNCATED is a new one, update the tracepoint to support it. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Liu Bo authored
We use set_bit() to assign ordered extent's flags, but in the related tracepoint we don't do the same thing, which makes the trace output not to parse flags correctly. Also, since the flags are bits stuff, we change to use __print_flags with a 'delim' instead of __print_symbolic. Signed-off-by:
-
Kelley Nielsen authored
This is the third step in bootstrapping the btrfs_find_item interface. The function find_orphan_item(), in orphan.c, is similar to the two functions already replaced by the new interface. It uses two parameters, which are already present in the interface, and is nearly identical to the function brought in in the previous patch. Replace the two calls to find_orphan_item() with calls to btrfs_find_item(), with the defined objectid and type that was used internally by find_orphan_item(), a null path, and a null key. Add a test for a null path to btrfs_find_item, and if it passes, allocate and free the path. Finally, remove find_orphan_item(). Signed-off-by:
Kelley Nielsen <kelleynnn@gmail.com> Signed-off-by:
-
Kelley Nielsen authored
This patch is the second step in bootstrapping the btrfs_find_item interface. The btrfs_find_root_ref() is similar to the former __inode_info(); it accepts four of its parameters, and duplicates the first half of its functionality. Replace the one former call to btrfs_find_root_ref() with a call to btrfs_find_item(), along with the defined key type that was used internally by btrfs_find_root ref, and a null found key. In btrfs_find_item(), add a test for the null key at the place where the functionality of btrfs_find_root_ref() ends; btrfs_find_item() then returns if the test passes. Finally, remove btrfs_find_root_ref(). Signed-off-by:
Zach Brown <zab@redhat.com> Reviewed-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
-
Kelley Nielsen authored
There are many btrfs functions that manually search the tree for an item. They all reimplement the same mechanism and differ in the conditions that they use to find the item. __inode_info() is one such example. Zach Brown proposed creating a new interface to take the place of these functions. This patch is the first step to creating the interface. A new function, btrfs_find_item, has been added to ctree.c and prototyped in ctree.h. It is identical to __inode_info, except that the order of the parameters has been rearranged to more closely those of similar functions elsewhere in the code (now, root and path come first, then the objectid, offset and type, and the key to be filled in last). __inode_info's callers have been set to call this new function instead, and __inode_info itself has been removed. Signed-off-by:
-
Valentina Giusti authored
Use otherwise unused local variables slot in update_qgroup_limit_item and in update_qgroup_info_item, and remove unused variable ins from btrfs_qgroup_account_ref. Signed-off-by:
Valentina Giusti <valentina.giusti@microon.de> Signed-off-by:
-
Valentina Giusti authored
Signed-off-by:
-
Valentina Giusti authored
Signed-off-by:
-
Valentina Giusti authored
The variable window_start in setup_cluster_no_bitmap is not used since commit 1bb91902 (Btrfs: revamp clustered allocation logic) Signed-off-by:
-
Valentina Giusti authored
Remove unused variables: * tree from end_bio_extent_writepage, * item from extent_fiemap. Signed-off-by:
-
Valentina Giusti authored
The variable found_uncached_bg in find_free_extent is not used since commit 285ff5af (Btrfs: remove the ideal caching code) Signed-off-by:
-
Valentina Giusti authored
Remove unused variables: * tree from csum_dirty_buffer, * tree from btree_readpage_end_io_hook, * tree from btree_writepages, * bytenr from btrfs_create_tree, * fs_info from end_workqueue_fn. Signed-off-by:
-
Valentina Giusti authored
Variable owner in btrfs_new_inode is unused since commit d82a6f1d (Btrfs: kill BTRFS_I(inode)->block_group) Signed-off-by:
-
Jeff Mahoney authored
This adds a writeable attribute which describes the label. Signed-off-by:
-
Jeff Mahoney authored
Now that we have the infrastructure for per-super attributes, we can publish device membership in /sys/fs/btrfs/<fsid>/devices. The information is published as symlinks to the block devices. Signed-off-by:
-
Jeff Mahoney authored
While trying to debug ENOSPC issues, it's helpful to understand what the kernel's view of the available space is. We export this information via ioctl, but sysfs files are more easily used. Signed-off-by:
-
Jeff Mahoney authored
btrfs filesystem df output will show the size of the metadata space and how much of it is used, and the user assumes that the difference is all usable space. Since that's not actually the case due to the global metadata reservation, we should provide the full picture to the user. This patch adds an ioctl that exports the size of the global metadata reservation so that btrfs filesystem df can report it. Signed-off-by:
-
