- 14 May, 2020 40 commits
-
-
Sowjanya Komatineni authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 6fe38aa8 ] Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents are osc, osc_div2, osc_div4 and extern clock. Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4 for PMC clocks. This patch fixes this. Tested-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Claudiu Beznea authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit b0ecf1c6 ] clk_hw_round_rate() may call round rate function of its parents. In case of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are controlled by clk-sam9x60-pll.c driver. The round rate function for this driver is sam9x60_pll_round_rate() which call in turn sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the proper range (rate < characteristics->output[0].min && rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will return a negative number to its caller (called by clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in case a negative number is returned by clk_core_round_rate_nolock(). With this, the USB clock will continue its rate computation even caller of clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60 may not chose the best parent. I detected this after a suspend/resume cycle on SAM9X60. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.comSigned-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Frank Rowand authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 216830d2 ] kmemleak reports several memory leaks from devicetree unittest. This is the fix for problem 2 of 5. of_unittest_platform_populate() left an elevated reference count for grandchild nodes (which are platform devices). Fix the platform device reference counts so that the memory will be freed. Fixes: fb2caa50 ("of/selftest: add testcase for nodes with same name and address") Reported-by: Erhard F. <erhard_f@mailbox.org> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Rob Herring authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit bd82bbf3 ] The ref counting is broken for OF_DYNAMIC when sysfs is disabled because the kobject initialization is skipped. Only the properties add/remove/update should be skipped for !SYSFS config. Tested-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Frank Rowand <frowand.list@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Chris Lew authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit a216000f ] Endianness can vary in the system, add le32_to_cpu when comparing partition sizes from smem. Signed-off-by: Chris Lew <clew@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Mohit Aggarwal authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 83220bf3 ] In order to set time in rtc, need to disable rtc hw before writing into rtc registers. Also fixes disabling of alarm while setting rtc time. Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Dedy Lansky authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 3d6b7272 ] wil_err inside wil_rx_refill can flood the log buffer. Replace it with wil_err_ratelimited. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Subhash Jadavani authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 69a6fff0 ] UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION is only applicable for QCOM UFS host controller version 2.x.y and this has been fixed from version 3.x.y onwards, hence this change removes this quirk for version 3.x.y onwards. [mkp: applied by hand] Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Dedy Lansky authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 6d9eb7eb ] For negative temperatures, "temp" debugfs is showing wrong values. Use signed types so proper calculations is done for sub zero temperatures. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Hamad Kadmany authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 6ccae584 ] Firmware ready event may take longer than current timeout in some scenarios, for example with multiple RFs connected where each requires an initial calibration. Increase the timeout to support these scenarios. Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org> Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Joe Moriarty authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 22a07038 upstream. The Parfait (version 2.1.0) static code analysis tool found the following NULL pointer derefernce problem. - drivers/gpu/drm/drm_dp_mst_topology.c The call to drm_dp_calculate_rad() in function drm_dp_port_setup_pdt() could result in a NULL pointer being returned to port->mstb due to a failure to allocate memory for port->mstb. Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180212195144.98323-3-joe.moriarty@oracle.comSigned-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 864eb1af upstream. Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/video/fbdev/sis/init301.c:851:42: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ~~~~~~~~~~~~~~~~~~~~~~~~^~~~ drivers/video/fbdev/sis/init301.c:851:42: note: remove extraneous parentheses around the comparison to silence this warning } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ~ ^ ~ drivers/video/fbdev/sis/init301.c:851:42: note: use '=' to turn this equality comparison into an assignment } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* || ^~ = 1 warning generated. Remove the parentheses and while we're at it, clean up the commented code, which has been here since the beginning of git history. Link: https://github.com/ClangBuiltLinux/linux/issues/118Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 25faa4bd upstream. At the error path of the firmware loading error, the driver tries to release the card object and set NULL to drvdata. This may be referred badly at the possible PM action, as the driver itself is still bound and the PM callbacks read the card object. Instead, we continue the probing as if it were no option set. This is often a better choice than the forced abort, too. Fixes: 5cb543db ("ALSA: hda - Deferred probing with request_firmware_nowait()") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043 Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Li Bin authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 849f8583 upstream. If the dxfer_len is greater than 256M then the request is invalid and we need to call sg_remove_request in sg_common_write. Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com Fixes: f930c704 ("scsi: sg: only check for dxfer_len greater than 256M") Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Li Bin <huawei.libin@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Xiao Yang authored
tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation BugLink: https://bugs.launchpad.net/bugs/1875905 commit 0bbe7f71 upstream. Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger() or snapshot_count_trigger()) when register_snapshot_trigger() has completed registration but doesn't allocate buffer for 'snapshot' event trigger. In the rare case, 'snapshot' operation always detects the lack of allocated buffer so make register_snapshot_trigger() allocate buffer first. trigger-snapshot.tc in kselftest reproduces the issue on slow vm: ----------------------------------------------------------- cat trace ... ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036 <...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED *** <...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! *** ----------------------------------------------------------- Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com Cc: stable@vger.kernel.org Fixes: 93e31ffb ("tracing: Add 'snapshot' event trigger command") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Borislav Petkov authored
BugLink: https://bugs.launchpad.net/bugs/1875905 The fast SYSCALL exit path returns with SYSRET to userspace after verifying that there's no pending work. MDS mitigation mandates that CPU buffers must be cleared on transition from kernel to userspace so do that here too. Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Jim Mattson authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 396d2e87 upstream. The host reports support for the synthetic feature X86_FEATURE_SSBD when any of the three following hardware features are set: CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] CPUID.80000008H:EBX.AMD_SSBD[bit 24] CPUID.80000008H:EBX.VIRT_SSBD[bit 25] Either of the first two hardware features implies the existence of the IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host. Fixes: 0c54914d ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code") Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Jacob Xu <jacobhxu@google.com> Reviewed-by: Peter Shier <pshier@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 4.x: adjust indentation] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Goldwyn Rodrigues authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 7690e253 ] One can crash dm-flakey by specifying more feature arguments than the number of features supplied. Checking for null in arg_name avoids this. dmsetup create flakey-test --table "0 66076080 flakey /dev/sdb9 0 0 180 2 drop_writes" Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Jan Kara authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 801674f3 upstream. We do not want to create initialized extents beyond end of file because for e2fsck it is impossible to distinguish them from a case of corrupted file size / extent tree and so it complains like: Inode 12, i_size is 147456, should be 163840. Fix? no Code in ext4_ext_convert_to_initialized() and ext4_split_convert_extents() try to make sure it does not create initialized extents beyond inode size however they check against inode->i_size which is wrong. They should instead check against EXT4_I(inode)->i_disksize which is the current inode size on disk. That's what e2fsck is going to see in case of crash before all dirty data is written. This bug manifests as generic/456 test failure (with recent enough fstests where fsx got fixed to properly pass FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock mount option. CC: stable@vger.kernel.org Fixes: 21ca087a ("ext4: Do not zero out uninitialized extents beyond i_size") Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Tuomas Tynkkynen authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 7ea86204 upstream. syzbot reports a warning: precision 33020 too large WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547 kvasprintf+0xb2/0x170 lib/kasprintf.c:22 kasprintf+0xbb/0xf0 lib/kasprintf.c:59 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] ... entry_SYSCALL_64_after_hwframe+0x49/0xbe Thus it seems that kasprintf() with "%.*s" format can not be used for duplicating a string with arbitrary length. Replace it with kstrndup(). Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64, but the code is simpler this way. Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com Cc: stable@kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi [johannes: add note about length limit] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 3507245b upstream. The mapping table may contain also ignore_ctl_error flag for devices that are known to behave wild. Since this flag always writes the card's own ignore_ctl_error flag, it overrides the value already set by the module option, so it doesn't follow user's expectation. Let's fix the code not to clear the flag that has been set by user. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200412081331.4742-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 3025571e upstream. Currently function sst_platform_get_resources always returns zero and error return codes set by the function are never returned. Fix this by returning the error return code in variable ret rather than the hard coded zero. Addresses-Coverity: ("Unused value") Fixes: f533a035 ("ASoC: Intel: mrfld - create separate module for pci part") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit f5e056e1 upstream. The check on p->sink looks bogus, I believe it should be p->source since the following code blocks are related to p->source. Fix this by replacing p->sink with p->source. Fixes: 24c8d141 ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Copy-paste error") Link: https://lore.kernel.org/r/20191119113640.166940-1-colin.king@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Josh Triplett authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit b9c538da upstream. If ext4_fill_super detects an invalid number of inodes per group, the resulting error message printed the number of blocks per group, rather than the number of inodes per group. Fix it to print the correct value. Fixes: cd6bb35b ("ext4: use more strict checks for inodes_per_block on mount") Link: https://lore.kernel.org/r/8be03355983a08e5d4eed480944613454d7e2550.1585434649.git.josh@joshtriplett.orgReviewed-by: Andreas Dilger <adilger@dilger.ca> Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Josh Triplett authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit df41460a upstream. ext4_fill_super doublechecks the number of groups before mounting; if that check fails, the resulting error message prints the group count from the ext4_sb_info sbi, which hasn't been set yet. Print the freshly computed group count instead (which at that point has just been computed in "blocks_count"). Signed-off-by: Josh Triplett <josh@joshtriplett.org> Fixes: 4ec11028 ("ext4: Add sanity checks for the superblock before mounting the filesystem") Link: https://lore.kernel.org/r/8b957cd1513fcc4550fe675c10bcce2175c33a49.1585431964.git.josh@joshtriplett.orgSigned-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
zhangyi (F) authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 780f66e5 upstream. Improve comments in jbd2_journal_commit_transaction() to describe why we don't need to clear the buffer_mapped bit for freeing file mapping buffers whose page mapping is NULL. Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com Fixes: c96dceea ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer") Suggested-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Can Guo authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit c63d6099 upstream. The async version of ufshcd_hold(async == true), which is only called in queuecommand path as for now, is expected to work in atomic context, thus it should not sleep or schedule out. When it runs into the condition that clocks are ON but link is still in hibern8 state, it should bail out without flushing the clock ungate work. Fixes: f2a785ac ("scsi: ufshcd: Fix race between clk scaling and ungate work") Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.orgReviewed-by: Hongwu Su <hongwus@codeaurora.org> Reviewed-by: Asutosh Das <asutoshd@codeaurora.org> Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Tim Stallard authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 03e2a984 ] The behaviour for what is considered an anycast address changed in commit 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception"). This now considers the first address in a subnet where there is a route via a gateway to be an anycast address. This breaks path MTU discovery and traceroutes when a host in a remote network uses the address at the start of a prefix (eg 2600:: advertised as 2600::/48 in the DFZ) as ICMP errors will not be sent to anycast addresses. This patch excludes any routes with a gateway, or via point to point links, like the behaviour previously from rt6_is_gw_or_nonexthop in net/ipv6/route.c. This can be tested with: ip link add v1 type veth peer name v2 ip netns add test ip netns exec test ip link set lo up ip link set v2 netns test ip link set v1 up ip netns exec test ip link set v2 up ip addr add 2001:db8::1/64 dev v1 nodad ip addr add 2001:db8:100:: dev lo nodad ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad ip netns exec test ip route add unreachable 2001:db8:1::1 ip netns exec test ip route add 2001:db8:100::/64 via 2001:db8::1 ip netns exec test sysctl net.ipv6.conf.all.forwarding=1 ip route add 2001:db8:1::1 via 2001:db8::2 ping -I 2001:db8::1 2001:db8:1::1 -c1 ping -I 2001:db8:100:: 2001:db8:1::1 -c1 ip addr delete 2001:db8:100:: dev lo ip netns delete test Currently the first ping will get back a destination unreachable ICMP error, but the second will never get a response, with "icmp6_send: acast source" logged. After this patch, both get destination unreachable ICMP replies. Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Tim Stallard <code@timstallard.me.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Taras Chornyi authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 690cc863 ] When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device with autojoin flag or when multicast ip is deleted kernel will crash. steps to reproduce: ip addr add 224.0.0.0/32 dev eth0 ip addr del 224.0.0.0/32 dev eth0 or ip addr add 224.0.0.0/32 dev eth0 autojoin Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 pc : _raw_write_lock_irqsave+0x1e0/0x2ac lr : lock_sock_nested+0x1c/0x60 Call trace: _raw_write_lock_irqsave+0x1e0/0x2ac lock_sock_nested+0x1c/0x60 ip_mc_config.isra.28+0x50/0xe0 inet_rtm_deladdr+0x1a8/0x1f0 rtnetlink_rcv_msg+0x120/0x350 netlink_rcv_skb+0x58/0x120 rtnetlink_rcv+0x14/0x20 netlink_unicast+0x1b8/0x270 netlink_sendmsg+0x1a0/0x3b0 ____sys_sendmsg+0x248/0x290 ___sys_sendmsg+0x80/0xc0 __sys_sendmsg+0x68/0xc0 __arm64_sys_sendmsg+0x20/0x30 el0_svc_common.constprop.2+0x88/0x150 do_el0_svc+0x20/0x80 el0_sync_handler+0x118/0x190 el0_sync+0x140/0x180 Fixes: 93a714d6 ("multicast: Extend ip address command to enable multicast group join/leave on") Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Andy Shevchenko authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit fb945c95 ] While the commit 2b8bd606 ("mfd: dln2: More sanity checking for endpoints") tries to harden the sanity checks it made at the same time a regression, i.e. mixed in and out endpoints. Obviously it should have been not tested on real hardware at that time, but unluckily it didn't happen. So, fix above mentioned typo and make device being enumerated again. While here, introduce an enumerator for magic values to prevent similar issue to happen in the future. Fixes: 2b8bd606 ("mfd: dln2: More sanity checking for endpoints") Cc: Oliver Neukum <oneukum@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 85dc2c65 ] Clang warns when multiple pairs of parentheses are used for a single conditional statement. drivers/misc/echo/echo.c:384:27: warning: equality comparison with extraneous parentheses [-Wparentheses-equality] if ((ec->nonupdate_dwell == 0)) { ~~~~~~~~~~~~~~~~~~~~^~~~ drivers/misc/echo/echo.c:384:27: note: remove extraneous parentheses around the comparison to silence this warning if ((ec->nonupdate_dwell == 0)) { ~ ^ ~ drivers/misc/echo/echo.c:384:27: note: use '=' to turn this equality comparison into an assignment if ((ec->nonupdate_dwell == 0)) { ^~ = 1 warning generated. Remove them and while we're at it, simplify the zero check as '!var' is used more than 'var == 0'. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Laurentiu Tudor authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit aa411334 ] In the current implementation, the call to loadcam_multi() is wrapped between switch_to_as1() and restore_to_as0() calls so, when it tries to create its own temporary AS=1 TLB1 entry, it ends up duplicating the existing one created by switch_to_as1(). Add a check to skip creating the temporary entry if already running in AS=1. Fixes: d9e1831a ("powerpc/85xx: Load all early TLB entries at once") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by: Scott Wood <oss@buserror.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.comSigned-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 32830a05 ] The wait_event() function is used to detect command completion. When send_guid_cmd() returns an error, smi_send() has not been called to send data. Therefore, wait_event() should not be used on the error path, otherwise it will cause the following warning: [ 1361.588808] systemd-udevd D 0 1501 1436 0x00000004 [ 1361.588813] ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40 [ 1361.677952] ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010 [ 1361.767077] 00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000 [ 1361.856199] Call Trace: [ 1361.885578] [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780 [ 1361.951406] [<ffffffff8173cfb6>] schedule+0x36/0x80 [ 1362.010979] [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler] [ 1362.091281] [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100 [ 1362.168533] [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler] [ 1362.258337] [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si] [ 1362.334521] [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si] [ 1362.411701] [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si] [ 1362.487917] [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si] [ 1362.568219] [<ffffffff810021a0>] do_one_initcall+0x50/0x180 [ 1362.636109] [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190 [ 1362.714330] [<ffffffff811b2ae1>] do_init_module+0x5f/0x200 [ 1362.781208] [<ffffffff81123ca8>] load_module+0x1898/0x1de0 [ 1362.848069] [<ffffffff811202e0>] ? __symbol_put+0x60/0x60 [ 1362.913886] [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80 [ 1362.998514] [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120 [ 1363.068463] [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120 [ 1363.140513] [<ffffffff811244be>] SyS_finit_module+0xe/0x10 [ 1363.207364] [<ffffffff81003c04>] do_syscall_64+0x74/0x180 Fixes: 50c812b2 ("[PATCH] ipmi: add full sysfs support") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Corey Minyard <minyard@acm.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: openipmi-developer@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # 2.6.17- Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Lyude Paul authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit 8732fe46 ] The issues caused by: commit 64e62bdf ("drm/dp_mst: Remove VCPI while disabling topology mgr") Prompted me to take a closer look at how we clear the payload state in general when disabling the topology, and it turns out there's actually two subtle issues here. The first is that we're not grabbing &mgr.payload_lock when clearing the payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical lock order is &mgr.payload_lock -> &mgr.lock (because we always want &mgr.lock to be the inner-most lock so topology validation always works), this makes perfect sense. It also means that -technically- there could be racing between someone calling drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a modeset occurring that's modifying the payload state at the same time. The second is the more obvious issue that Wayne Lin discovered, that we're not clearing proposed_payloads when disabling the topology. I actually can't see any obvious places where the racing caused by the first issue would break something, and it could be that some of our higher-level locks already prevent this by happenstance, but better safe then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst() first grabs &mgr.payload_lock followed by &mgr.lock so that we never race when modifying the payload state. Then, we also clear proposed_payloads to fix the original issue of enabling a new topology with a dirty payload state. This doesn't clear any of the drm_dp_vcpi structures, but those are getting destroyed along with the ports anyway. Changes since v1: * Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead - vsyrjala Cc: Sean Paul <sean@poorly.run> Cc: Wayne Lin <Wayne.Lin@amd.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.comSigned-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1875905 [ Upstream commit f0cc2cd7 ] During unmount we can have a job from the delayed inode items work queue still running, that can lead to at least two bad things: 1) A crash, because the worker can try to create a transaction just after the fs roots were freed; 2) A transaction leak, because the worker can create a transaction before the fs roots are freed and just after we committed the last transaction and after we stopped the transaction kthread. A stack trace example of the crash: [79011.691214] kernel BUG at lib/radix-tree.c:982! [79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G W 5.6.0-rc2-btrfs-next-54 #2 (...) [79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs] [79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170 (...) [79011.702014] RSP: 0018:ffffb3c84a317ca0 EFLAGS: 00010293 [79011.702949] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [79011.704202] RDX: ffffb3c84a317cb0 RSI: ffffb3c84a317ca8 RDI: ffff8db3931340a0 [79011.705463] RBP: 0000000000000005 R08: 0000000000000005 R09: ffffffff974629d0 [79011.706756] R10: ffffb3c84a317bc0 R11: 0000000000000001 R12: ffff8db393134000 [79011.708010] R13: ffff8db3931340a0 R14: ffff8db393134068 R15: 0000000000000001 [79011.709270] FS: 0000000000000000(0000) GS:ffff8db3b6a00000(0000) knlGS:0000000000000000 [79011.710699] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [79011.711710] CR2: 00007f22c2a0a000 CR3: 0000000232ad4005 CR4: 00000000003606e0 [79011.712958] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [79011.714205] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [79011.715448] Call Trace: [79011.715925] record_root_in_trans+0x72/0xf0 [btrfs] [79011.716819] btrfs_record_root_in_trans+0x4b/0x70 [btrfs] [79011.717925] start_transaction+0xdd/0x5c0 [btrfs] [79011.718829] btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs] [79011.719915] btrfs_work_helper+0xaa/0x720 [btrfs] [79011.720773] process_one_work+0x26d/0x6a0 [79011.721497] worker_thread+0x4f/0x3e0 [79011.722153] ? process_one_work+0x6a0/0x6a0 [79011.722901] kthread+0x103/0x140 [79011.723481] ? kthread_create_worker_on_cpu+0x70/0x70 [79011.724379] ret_from_fork+0x3a/0x50 (...) The following diagram shows a sequence of steps that lead to the crash during ummount of the filesystem: CPU 1 CPU 2 CPU 3 btrfs_punch_hole() btrfs_btree_balance_dirty() btrfs_balance_delayed_items() --> sees fs_info->delayed_root->items with value 200, which is greater than BTRFS_DELAYED_BACKGROUND (128) and smaller than BTRFS_DELAYED_WRITEBACK (512) btrfs_wq_run_delayed_node() --> queues a job for fs_info->delayed_workers to run btrfs_async_run_delayed_root() btrfs_async_run_delayed_root() --> job queued by CPU 1 --> starts picking and running delayed nodes from the prepare_list list close_ctree() btrfs_delete_unused_bgs() btrfs_commit_super() btrfs_join_transaction() --> gets transaction N btrfs_commit_transaction(N) --> set transaction state to TRANTS_STATE_COMMIT_START btrfs_first_prepared_delayed_node() --> picks delayed node X through the prepared_list list btrfs_run_delayed_items() btrfs_first_delayed_node() --> also picks delayed node X but through the node_list list __btrfs_commit_inode_delayed_items() --> runs all delayed items from this node and drops the node's item count to 0 through call to btrfs_release_delayed_inode() --> finishes running any remaining delayed nodes --> finishes transaction commit --> stops cleaner and transaction threads btrfs_free_fs_roots() --> frees all roots and removes them from the radix tree fs_info->fs_roots_radix btrfs_join_transaction() start_transaction() btrfs_record_root_in_trans() record_root_in_trans() radix_tree_tag_set() --> crashes because the root is not in the radix tree anymore If the worker is able to call btrfs_join_transaction() before the unmount task frees the fs roots, we end up leaking a transaction and all its resources, since after the call to btrfs_commit_super() and stopping the transaction kthread, we don't expect to have any transaction open anymore. When this situation happens the worker has a delayed node that has no more items to run, since the task calling btrfs_run_delayed_items(), which is doing a transaction commit, picks the same node and runs all its items first. We can not wait for the worker to complete when running delayed items through btrfs_run_delayed_items(), because we call that function in several phases of a transaction commit, and that could cause a deadlock because the worker calls btrfs_join_transaction() and the task doing the transaction commit may have already set the transaction state to TRANS_STATE_COMMIT_DOING. Also it's not possible to get into a situation where only some of the items of a delayed node are added to the fs/subvolume tree in the current transaction and the remaining ones in the next transaction, because when running the items of a delayed inode we lock its mutex, effectively waiting for the worker if the worker is running the items of the delayed node already. Since this can only cause issues when unmounting a filesystem, fix it in a simple way by waiting for any jobs on the delayed workers queue before calling btrfs_commit_supper() at close_ctree(). This works because at this point no one can call btrfs_btree_balance_dirty() or btrfs_balance_delayed_items(), and if we end up waiting for any worker to complete, btrfs_commit_super() will commit the transaction created by the worker. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit c7def7fb upstream. In restore_tm_sigcontexts() we take the trap value directly from the user sigcontext with no checking: err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]); This means we can be in the kernel with an arbitrary regs->trap value. Although that's not immediately problematic, there is a risk we could trigger one of the uses of CHECK_FULL_REGS(): #define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1) It can also cause us to unnecessarily save non-volatile GPRs again in save_nvgprs(), which shouldn't be problematic but is still wrong. It's also possible it could trick the syscall restart machinery, which relies on regs->trap not being == 0xc00 (see 9a81c16b ("powerpc: fix double syscall restarts")), though I haven't been able to make that happen. Finally it doesn't match the behaviour of the non-TM case, in restore_sigcontext() which zeroes regs->trap. So change restore_tm_sigcontexts() to zero regs->trap. This was discovered while testing Nick's upcoming rewrite of the syscall entry path. In that series the call to save_nvgprs() prior to signal handling (do_notify_resume()) is removed, which leaves the low-bit of regs->trap uncleared which can then trigger the FULL_REGS() WARNs in setup_tm_sigcontexts(). Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.auSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 8305f72f upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Simon Gander authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit 25efb2ff upstream. When removing files containing extended attributes, the hfsplus driver may remove the wrong entries from the attributes b-tree, causing major filesystem damage and in some cases even kernel crashes. To remove a file, all its extended attributes have to be removed as well. The driver does this by looking up all keys in the attributes b-tree with the cnid of the file. Each of these entries then gets deleted using the key used for searching, which doesn't contain the attribute's name when it should. Since the key doesn't contain the name, the deletion routine will not find the correct entry and instead remove the one in front of it. If parent nodes have to be modified, these become corrupt as well. This causes invalid links and unsorted entries that not even macOS's fsck_hfs is able to fix. To fix this, modify the search key before an entry is deleted from the attributes b-tree by copying the found entry's key into the search key, therefore ensuring that the correct entry gets removed from the tree. Signed-off-by: Simon Gander <simon@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Anton Altaparmakov <anton@tuxera.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit d7d27cfc upstream. Patch series "module autoloading fixes and cleanups", v5. This series fixes a bug where request_module() was reporting success to kernel code when module autoloading had been completely disabled via 'echo > /proc/sys/kernel/modprobe'. It also addresses the issues raised on the original thread (https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u) bydocumenting the modprobe sysctl, adding a self-test for the empty path case, and downgrading a user-reachable WARN_ONCE(). This patch (of 4): It's long been possible to disable kernel module autoloading completely (while still allowing manual module insertion) by setting /proc/sys/kernel/modprobe to the empty string. This can be preferable to setting it to a nonexistent file since it avoids the overhead of an attempted execve(), avoids potential deadlocks, and avoids the call to security_kernel_module_request() and thus on SELinux-based systems eliminates the need to write SELinux rules to dontaudit module_request. However, when module autoloading is disabled in this way, request_module() returns 0. This is broken because callers expect 0 to mean that the module was successfully loaded. Apparently this was never noticed because this method of disabling module autoloading isn't used much, and also most callers don't use the return value of request_module() since it's always necessary to check whether the module registered its functionality or not anyway. But improperly returning 0 can indeed confuse a few callers, for example get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit: if (!fs && (request_module("fs-%.*s", len, name) == 0)) { fs = __get_fs_type(name, len); WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name); } This is easily reproduced with: echo > /proc/sys/kernel/modprobe mount -t NONEXISTENT none / It causes: request_module fs-NONEXISTENT succeeded, but still no fs? WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0 [...] This should actually use pr_warn_once() rather than WARN_ONCE(), since it's also user-reachable if userspace immediately unloads the module. Regardless, request_module() should correctly return an error when it fails. So let's make it return -ENOENT, which matches the error when the modprobe binary doesn't exist. I've also sent patches to document and test this case. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Jessica Yu <jeyu@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Ben Hutchings <benh@debian.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Hans de Goede authored
BugLink: https://bugs.launchpad.net/bugs/1875905 commit ebc68ced upstream. The Acer Aspire 5738z has a button to disable (and re-enable) the touchpad next to the touchpad. When this button is pressed a LED underneath indicates that the touchpad is disabled (and an event is send to userspace and GNOME shows its touchpad enabled / disable OSD thingie). So far so good, but after re-enabling the touchpad it no longer works. The laptop does not have an external ps2 port, so mux mode is not needed and disabling mux mode fixes the touchpad no longer working after toggling it off and back on again, so lets add this laptop model to the nomux list. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ian May <ian.may@canonical.com> Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-