- 10 Nov, 2005 40 commits
-
-
Tony Luck authored
-
Tony Luck authored
-
Tony Luck authored
-
Tony Luck authored
-
Igor Popik authored
The i82365 driver does not release all the resources when the device is not found. This can cause an oops when reading /proc/ioports after module unload. Signed-off-by: Igor Popik <igor.popik@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Marcelo Tosatti authored
Kconfig entry: dependency on 8xx Makefile: fix whitespace breakage m8xx_pcmcia.c: - asm/segment.h is gone - use generic PCMCIA suspend/resume methods Signed-off-by: Marcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
Ralf Baechle authored
Add rsp. remove the inclusion of <linux/config.h> as needed. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
-
-
Stephen Rothwell authored
Only MULTIPLATFORM has phbs_remap_io. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Paul Mackerras authored
For now, we need these declarations that we moved from C code in the asm-ppc64 versions of these headers as well as the asm-powerpc versions. The asm-ppc64 versions will be disappearing shortly. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
19-rpaphp-crashing.patch This patch fixes a bug related to dlpar PHB add, after a PHB removal. -- The crash was due to the PHB not having a pci_dn structure yet, when the phb is being added. This code survived testing, of adding and removeig the PHB and all slots underneath it, 17 times so far, as of this writing. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linas Vepstas authored
17-eeh-slot-marking-bug.patch A device that experiences a PCI outage may be just one deivce out of many that was affected. In order to avoid repeated reports of a failure, the entire tree of affected devices should be marked as failed. This patch marks up the entire tree. Signed-off-by: Linas Vepstas <linas@linas.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
-
Paul Mackerras authored
This also make klimit have the same type on 32-bit as on 64-bit, namely unsigned long, and defines and initializes it in one place. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
David Gibson authored
This patch moves a bunch more files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: hvcall.h proc_ppc64.c sysfs.c lparcfg.c rtas_pci.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
phbs_remap_io(), which maps the PCI IO space into the kernel virtual space, is called too early on powermac, and thus doesn't work. This fixes it by removing the call from all platforms and putting it back into the ppc64 common code where it belongs, after the actual probing of the bus. That means that before that call, only the ISA IO space (if any) is mapped, any PIO access (from quirks for example) will fail. This happens not to be a problem for now, but we'll have to rework that code if it becomes one in the future. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
That DART (U3 iommu) code didn't properly scale the number of entries when using !4k pages. That caused crashes when booting G5s with more than 2Gb of RAM. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Benjamin Herrenschmidt authored
This patch makes the kernel use a different kmem cache for PMD pages as they are smaller than PTE pages. Avoids waste of memory. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Linus Torvalds authored
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
-
Linus Torvalds authored
-
Trond Myklebust authored
If the call to xprt_transmit() fails due to socket buffer space exhaustion, we do not need to re-encode the RPC message when we loop back through call_transmit. Re-encoding can actually end up triggering the WARN_ON() in call_decode() if we re-encode something like a read() request and auth->au_rslack has changed. It can also cause us to increment the RPCSEC_GSS sequence number beyond the limits of the allowed window. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Paul Mackerras authored
This makes the memory examine/change command print the address as 8 digits instead of 16, and makes the memory dump command print 4 4-byte values per line instead of 2 8-byte values. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This is at the request of the glibc folks, who want to use these bits to select libraries optimized for the microarchitecture and new instructions in these processors. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
We were getting the last_jiffy per-cpu variable set ahead of the current timebase in smp_space_timers on SMP machines. This caused the loop in timer_interrupt to loop virtually forever, since tb_ticks_since assumes that it will never be called with the timebase behind the last_jiffy value. Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
A couple of bugs crept in with the merge of smp.c... Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Gcc 4 doesn't like being told to inline a recursive function... Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
Signed-off-by: Paul Mackerras <paulus@samba.org>
-
Paul Mackerras authored
This patch merges platform codes. systemcfg->platform is no longer used, systemcfg use in general is deprecated as much as possible (and renamed _systemcfg before it gets completely moved elsewhere in a future patch), _machine is now used on ppc64 along as ppc32. Platform codes aren't gone yet but we are getting a step closer. A bunch of asm code in head[_64].S is also turned into C code. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
This patch consolidates macros used to generate assembly for compatibility across different CPUs or configs. A new header, asm-powerpc/asm-compat.h contains the main compatibility macros. It uses some preprocessor magic to make the macros suitable both for use in .S files, and in inline asm in .c files. Headers (bitops.h, uaccess.h, atomic.h, bug.h) which had their own such compatibility macros are changed to use asm-compat.h. ppc_asm.h is now for use in .S files *only*, and a #error enforces that. As such, we're a lot more careless about namespace pollution here than in asm-compat.h. While we're at it, this patch adds a call to the PPC405_ERR77 macro in futex.h which should have had it already, but didn't. Built and booted on pSeries, Maple and iSeries (ARCH=powerpc). Built for 32-bit powermac (ARCH=powerpc) and Walnut (ARCH=ppc). Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
scanlog.c is only compiled on pSeries. Thus, this patch moves it to platforms/pseries. Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64). Built for iSeries (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
David Gibson authored
The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
-
-
Thomas Graf authored
The generic netlink family builds on top of netlink and provides simplifies access for the less demanding netlink users. It solves the problem of protocol numbers running out by introducing a so called controller taking care of id management and name resolving. Generic netlink modules register themself after filling out their id card (struct genl_family), after successful registration the modules are able to register callbacks to command numbers by filling out a struct genl_ops and calling genl_register_op(). The registered callbacks are invoked with attributes parsed making life of simple modules a lot easier. Although generic netlink modules can request static identifiers, it is recommended to use GENL_ID_GENERATE and to let the controller assign a unique identifier to the module. Userspace applications will then ask the controller and lookup the idenfier by the module name. Due to the current multicast implementation of netlink, the number of generic netlink modules is restricted to 1024 to avoid wasting memory for the per socket multiacst subscription bitmask. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Introduces netlink_run_queue() to handle the receive queue of a netlink socket in a generic way. Processes as much as there was in the queue upon entry and invokes a callback function for each netlink message found. The callback function may refuse a message by returning a negative error code but setting the error pointer to 0 in which case netlink_run_queue() will return with a qlen != 0. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-