- 08 Jun, 2009 22 commits
-
-
Brian King authored
Bump driver version Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <James.Bottomley@HansenPartnership.com>
-
Brian King authored
There are several scenarios where the ibmvfc driver needs to try to log back into a target on the fabric. Today when these events occur, we simply go through re-discovery for all attached targets, assuming that either the query of the name server or an ADISC will indicate we might need to log back into the target, which doesn't work for all scenarios. Fix this by taking note of the affected target(s) in these conditions and ensuring we try to PLOGI back into the target. Signed-off-by:
-
Brian King authored
For certain scenarios during device rediscovery, we detect we need to log back into a target. Currently we do just that - PLOGI/PRLI back into the target. Change the code to delete and add the target from the FC transport layer as well, to ensure we handle any cases where the target may have changed. Signed-off-by:
-
Brian King authored
The virtual I/O server controlling the NPIV adapter associated with a virtual fibre channel adapter can send a HALT event to the client. When this occurs, the client can no longer send commands until a RESUME is received. By adding support for flush on halt, we will get all of our outstanding commands flushed back before the Virtual I/O server enters the halt state, eliminating potential command timeouts for outstanding commands which might occur if we did not support this feature. Signed-off-by:
-
Brian King authored
This patch adds support for a new command supported by the Virtual I/O Server, NPIV Logout. The command will abort all outstanding commands and log out of the fabric. Currently, the only way to do this is by breaking the CRQ, which can take a fairly long time when lots of commands are outstanding. The NPIV Logout commands provides a mechanism to accomplish virtually the same function, but is much faster. Signed-off-by:
-
Brian King authored
Fixes the following deadlock scenario shown below. We currently allow queuecommand to send commands when the ibmvfc workqueue is scanning for new rports, so we should also allow EH to function at this time as well. scsi_eh_3 D 0000000000000000 12304 1279 2 Call Trace: [c0000002f7257730] [c0000002f72577e0] 0xc0000002f72577e0 (unreliable) [c0000002f7257900] [c0000000000118f4] .__switch_to+0x158/0x1a0 [c0000002f72579a0] [c0000000004f8b40] .schedule+0x8d4/0x9dc [c0000002f7257b60] [c0000000004f8f08] .schedule_timeout+0xa8/0xe8 [c0000002f7257c50] [d0000000001d23e0] .ibmvfc_wait_while_resetting+0xe4/0x140 [ibmvfc] [c0000002f7257d20] [d0000000001d3984] .ibmvfc_eh_abort_handler+0x60/0xe4 [ibmvfc] [c0000002f7257dc0] [d000000000366714] .scsi_error_handler+0x38c/0x674 [scsi_mod] [c0000002f7257f00] [c0000000000a7470] .kthread+0x78/0xc4 [c0000002f7257f90] [c000000000029b8c] .kernel_thread+0x4c/0x68 ibmvfc_3 D 0000000000000000 12432 1280 2 Call Trace: [c0000002f7253540] [c0000002f72535f0] 0xc0000002f72535f0 (unreliable) [c0000002f7253710] [c0000000000118f4] .__switch_to+0x158/0x1a0 [c0000002f72537b0] [c0000000004f8b40] .schedule+0x8d4/0x9dc [c0000002f7253970] [c0000000004f8e98] .schedule_timeout+0x38/0xe8 [c0000002f7253a60] [c0000000004f80cc] .wait_for_common+0x138/0x220 [c0000002f7253b40] [c0000000000a2784] .flush_cpu_workqueue+0xac/0xcc [c0000002f7253c10] [c0000000000a2960] .flush_workqueue+0x58/0xa0 [c0000002f7253ca0] [d0000000000827fc] .fc_flush_work+0x4c/0x64 [scsi_transport_fc] [c0000002f7253d20] [d000000000082db4] .fc_remote_port_add+0x48/0x6c4 [scsi_transport_fc] [c0000002f7253dd0] [d0000000001d7d04] .ibmvfc_work+0x820/0xa7c [ibmvfc] [c0000002f7253f00] [c0000000000a7470] .kthread+0x78/0xc4 [c0000002f7253f90] [c000000000029b8c] .kernel_thread+0x4c/0x68 fc_wq_3 D 0000000000000000 10720 1283 2 Call Trace: [c0000002f559ac30] [c0000002f559ace0] 0xc0000002f559ace0 (unreliable) [c0000002f559ae00] [c0000000000118f4] .__switch_to+0x158/0x1a0 [c0000002f559aea0] [c0000000004f8b40] .schedule+0x8d4/0x9dc [c0000002f559b060] [c0000000004f8e98] .schedule_timeout+0x38/0xe8 [c0000002f559b150] [c0000000004f80cc] .wait_for_common+0x138/0x220 [c0000002f559b230] [c0000000002721c4] .blk_execute_rq+0xb4/0x100 [c0000002f559b360] [d00000000036a1f8] .scsi_execute+0x118/0x194 [scsi_mod] [c0000002f559b420] [d00000000036a32c] .scsi_execute_req+0xb8/0x124 [scsi_mod] [c0000002f559b500] [d0000000000c1330] .sd_sync_cache+0x8c/0x108 [sd_mod] [c0000002f559b5e0] [d0000000000c15b4] .sd_shutdown+0x9c/0x158 [sd_mod] [c0000002f559b660] [d0000000000c16d0] .sd_remove+0x60/0xb4 [sd_mod] [c0000002f559b700] [c000000000392ecc] .__device_release_driver+0xd0/0x118 [c0000002f559b7a0] [c000000000393080] .device_release_driver+0x30/0x54 [c0000002f559b830] [c000000000392108] .bus_remove_device+0x128/0x16c [c0000002f559b8d0] [c00000000038f94c] .device_del+0x158/0x234 [c0000002f559b960] [d00000000036f078] .__scsi_remove_device+0x5c/0xd4 [scsi_mod] [c0000002f559b9f0] [d00000000036f124] .scsi_remove_device+0x34/0x58 [scsi_mod] [c0000002f559ba80] [d00000000036f204] .__scsi_remove_target+0xb4/0x120 [scsi_mod] [c0000002f559bb10] [d00000000036f338] .__remove_child+0x2c/0x44 [scsi_mod] [c0000002f559bb90] [c00000000038f11c] .device_for_each_child+0x54/0xb4 [c0000002f559bc50] [d00000000036f2e0] .scsi_remove_target+0x70/0x9c [scsi_mod] [c0000002f559bce0] [d000000000083454] .fc_starget_delete+0x24/0x3c [scsi_transport_fc] [c0000002f559bd70] [c0000000000a2368] .run_workqueue+0x118/0x208 [c0000002f559be30] [c0000000000a2580] .worker_thread+0x128/0x154 [c0000002f559bf00] [c0000000000a7470] .kthread+0x78/0xc4 [c0000002f559bf90] [c000000000029b8c] .kernel_thread+0x4c/0x68 Signed-off-by:
-
Brian King authored
The ibmvfc driver currently logs errors during discovery for several transient fabric errors, which generally get retried. If retries do not work, we see multiple errors in the log. If retries do work, we see errors in the log which may be confusing since the retry worked. This patch enhances the discovery time error logging to only log errors for command failures during discovery if all allowed retries have been used up. The existing behavior of logging all failures can be restored by setting the hosts log_level to a value of 3 or greater. Signed-off-by:
-
Brian King authored
Use DEVICE_ATTR macro for defining device sysfs attributes. Signed-off-by:
-
Brian King authored
Since target allocations can occur while resetting the virtual adapter, we shouldn't be using GFP_KERNEL for them as it could hang. Switch to use GFP_NOIO. Signed-off-by:
-
Brian King authored
Fix an obvious bug in processing error responses for SCSI commands which can result in successful responses being incorrectly returned with DID_ERROR. Signed-off-by:
-
James Bottomley authored
The async split up of probing in sd.c created a potential failure case where something goes wrong with device_add(), but which we don't recover properly. Since, in general, asynchronous error handling is hard, move the device_add() into the asynchronous path (it should be fast) and make sure all the deferred processing cannot fail. Signed-off-by: -
James Bottomley authored
The Documentation is incorrect (we removed some functions referred to), and none of the bug warnings now apply. Additionally remove the spurious check on the return from blk_get_request() which can't fail if __GFP_WAIT is passed in. Signed-off-by: -
Bartlomiej Zolnierkiewicz authored
Signed-off-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by:
-
James Smart authored
Signed-off-by:
James Smart <james.smart@emulex.com> Signed-off-by:
-
James Smart authored
Add support for persistent vport definitions at creation at boot time Also includes a few misc fixes for: - conversion to vpi name from vport slang name - couple of small mailbox references - some additional discovery mods Signed-off-by:
-
James Smart authored
Miscellaneous Changes: - Convert from SLI2_ACTIVE flag to more correct SLI_ACTIVE (generic) flag - Reposition log verbose messaging definitions - Update naming for vpi object name from vport slang name - Handle deferred error attention condition - Add 10G link support - Small bug fixup Signed-off-by:
-
James Smart authored
Update of copyrights on modified files Signed-off-by:
-
James Smart authored
SLI4 supports both FC and FCOE, with some extended topology objects. This patch adss support for the objects, and updates the disovery engines for their use. Signed-off-by:
-
James Smart authored
The mailbox commands themselves are the same, or very similar to their SLI3 counterparts. This patch genericizes mailbox command handling and adds support for the new SLI4 mailbox queue. Signed-off-by:
-
James Smart authored
Adds support for the new queues in the SLI-4 interface. There are : - Work Queues - host-to-adapter for fast-path traffic - Mailbox Queues - host-to-adapter for control (slow-path) - Buffer Queues - host-to-adapter for posting buffers for async receive - Completion Queues - adapter-to-host for posting async events, completions for fast or slow patch work, receipt of async receive traffic - Event Queues - tied to MSI-X vectors, binds completion queues with interrupts These patches add the all the support code to tie into command submission and response paths, updates the interrupt handling, etc. Signed-off-by: -
James Smart authored
Adds new hardware and interface definitions. Adds new interface routines - utilizing the reorganized layout of the driver. Adds SLI-4 specific functions for attachment, initialization, teardown, etc. Signed-off-by:
-
James Smart authored
Preps the organization of the driver so that the bottom half, which interacts with the hardware, can share common code sequences for attachment, detachment, initialization, teardown, etc with new hardware. For very common code sections, which become specific to the interface type, the driver uses an indirect function call. The function is set at initialization. For less common sections, such as initialization, the driver looks at the interface type and calls the routines relative to the interface. Signed-off-by:
-
- 23 May, 2009 18 commits
-
-
Abhijeet Joglekar authored
This allows fnic to configure number of retries for lport and rport separately. Signed-off-by:
Abhijeet Joglekar <abjoglek@cisco.com> Acked-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Eric Moore authored
Bump driver version. Signed-off-by:
Eric Moore <eric.moore@lsi.com> Signed-off-by:
-
Eric Moore authored
This fix's is for all local function so their name has the "_" preceeding the module name, then function name. Most the code is already is using this naming convention. Signed-off-by:
-
Eric Moore authored
This patch will find an active mid for a query_task request via the ioctl path. This code is already there for task_abort, so this patch combining code using the same fuction _ctl_set_task_mid(), previously _ctl_do_task_abort(). Signed-off-by:
-
Eric Moore authored
Adding new eh_target_reset_handler for target reset. Change the eh_device_reset_handler so its sending MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, instead of MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET. Add new function _scsih_scsi_lookup_find_by_lun as a sanity check to insure I_T_L commands are completed upon completing lun reset. Signed-off-by:
-
Eric Moore authored
This add support for type 1 and 3 DIF support per the Oracle API. Signed-off-by:
-
Christof Schmitt authored
Keep the information about the device and model id in zfcp_ccw. This requires an additional helper function to check for the privileged cfdc subchannel, but it allows the removal of the redundant defines from the zfcp_def header file. Reviewed-by:
Swen Schillig <swen@vnet.ibm.com> Signed-off-by:
Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by:
-
Swen Schillig authored
If the destination ID (D_ID) of a remote storage port changed, e.g. re-plugged cable on the switch in a different switch port, the port was never (re-)attached within Linux. This patch fixes the broken mapping between the WWPN and the D_ID. Signed-off-by:
-
Martin Petermann authored
In rare cases, open port request might timeout, erp calls zfcp_port_put, port gets dequeued. Now, the late returning (or dismissed) fsf-port-open calls the fsf_port_open_handler that tries to reference the port data structure leading to a kernel oops. Signed-off-by:
Martin Petermann <martin.petermann@de.ibm.com> Signed-off-by:
-
Christof Schmitt authored
Add comments where there is a deliberate fall through in switch/case statements. This makes some code checkers happy and makes it clear that there is no missing break statement. Reviewed-by:
-
Christof Schmitt authored
enum dma_data_direction only has the 4 values DMA_BIDIRECTIONAL, DMA_TO_DEVICE, DMA_FROM_DEVICE and DMA_NONE. No need to have the default case. While changing this, setup sbtype in one place to make sparse happy. The default value of retval is already -EIO, so remove the additional assignment for these two cases. Reviewed-by:
-
Christof Schmitt authored
zfcp did always set the queue_depth for SCSI devices to 32, not allowing to change this. Introduce a kernel parameter zfcp.queue_depth and the change_queue_depth callback to allow changing the queue_depth when it is required. Reviewed-by:
-
Christof Schmitt authored
Update the newly introduced message for the boxed status to conform to match the style of s390 and zfcp messages. Reviewed-by:
-
Christof Schmitt authored
The zfcp traces used the fsf_req address in place of the req_id. Change this to save the correct req_id. Reviewed-by:
-
Andy Yan authored
Signed-off-by:
Ying Chu <jasonchu@marvell.com> Signed-off-by:
Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com Signed-off-by:
-
Mike Christie authored
This patch just adds some debug statements for the abort and completion paths. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
Mike Christie authored
If a task did not complete normally due to a TMF, libiscsi will now complete the task with the state ISCSI_TASK_ABRT_TMF. Drivers like bnx2i that need to free resources if a command did not complete normally can then check the task state. If a driver does not need to send a special command if we have dropped the session then they can check for ISCSI_TASK_ABRT_SESS_RECOV. Signed-off-by:
-
Mike Christie authored
Instead of having libiscsi check if the offload bit is set, have it check if the lld created a work queue. I think this is more clear. Signed-off-by:
-
