Pull fscrypt update from Eric Biggers:
 "Just a small documentation improvement"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: improve the "Encryption modes and usage" section

Pull iomap updates from Darrick Wong:
 "We've got some big changes for this release -- I'm very happy to be
  landing willy's work to enable large folios for the page cache for
  general read and write IOs when the fs can make contiguous space
  allocations, and Ritesh's work to track sub-folio dirty state to
  eliminate the write amplification problems inherent in using large
  folios.

  As a bonus, io_uring can now process write completions in the caller's
  context instead of bouncing through a workqueue, which should reduce
  io latency dramatically. IOWs, XFS should see a nice performance bump
  for both IO paths.

  Summary:

   - Make large writes to the page cache fill sparse parts of the cache
     with large folios, then use large memcpy calls for the large folio.

   - Track the per-block dirty state of each large folio so that a
     buffered write to a single byte on a large folio does not result in
     a (potentially) multi-megabyte writeback IO.

   - Allow some directio completions to be performed in the initiating
     task's context instead of punting through a workqueue. This will
     reduce latency for some io_uring requests"

* tag 'iomap-6.6-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (26 commits)
  iomap: support IOCB_DIO_CALLER_COMP
  io_uring/rw: add write support for IOCB_DIO_CALLER_COMP
  fs: add IOCB flags related to passing back dio completions
  iomap: add IOMAP_DIO_INLINE_COMP
  iomap: only set iocb->private for polled bio
  iomap: treat a write through cache the same as FUA
  iomap: use an unsigned type for IOMAP_DIO_* defines
  iomap: cleanup up iomap_dio_bio_end_io()
  iomap: Add per-block dirty state tracking to improve performance
  iomap: Allocate ifs in ->write_begin() early
  iomap: Refactor iomap_write_delalloc_punch() function out
  iomap: Use iomap_punch_t typedef
  iomap: Fix possible overflow condition in iomap_write_delalloc_scan
  iomap: Add some uptodate state handling helpers for ifs state bitmap
  iomap: Drop ifs argument from iomap_set_range_uptodate()
  iomap: Rename iomap_page to iomap_folio_state and others
  iomap: Copy larger chunks from userspace
  iomap: Create large folios in the buffered write path
  filemap: Allow __filemap_get_folio to allocate large folios
  filemap: Add fgf_t typedef
  ...

Pull erofs updates from Gao Xiang:
 "In this cycle, a xattr bloom filter feature is introduced to speed up
  negative xattr lookups, which was originally suggested by Alexander
  for Composefs use cases.

  Additionally, the DEFLATE algorithm is now supported, which can be
  used together with hardware accelerators for our cloud workloads. Each
  supported compression algorithm can be selected on a per-file basis
  for specific access patterns too.

  There are also some random fixes and cleanups as usual:

   - Support xattr bloom filter to optimize negative xattr lookups

   - Support DEFLATE compression algorithm as an alternative

   - Fix a regression that ztailpacking pclusters don't release properly

   - Avoid warning dedupe and fragments features anymore

   - Some folio conversions and cleanups"

* tag 'erofs-for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: release ztailpacking pclusters properly
  erofs: don't warn dedupe and fragments features anymore
  erofs: adapt folios for z_erofs_read_folio()
  erofs: adapt folios for z_erofs_readahead()
  erofs: get rid of fe->backmost for cache decompression
  erofs: drop z_erofs_page_mark_eio()
  erofs: tidy up z_erofs_do_read_page()
  erofs: move preparation logic into z_erofs_pcluster_begin()
  erofs: avoid obsolete {collector,collection} terms
  erofs: simplify z_erofs_read_fragment()
  erofs: remove redundant erofs_fs_type declaration in super.c
  erofs: add necessary kmem_cache_create flags for erofs inode cache
  erofs: clean up redundant comment and adjust code alignment
  erofs: refine warning messages for zdata I/Os
  erofs: boost negative xattr lookup with bloom filter
  erofs: update on-disk format for xattr name filter
  erofs: DEFLATE compression support

Pull file locking updates from Jeff Layton:

 - new functionality for F_OFD_GETLK: requesting a type of F_UNLCK will
   find info about whatever lock happens to be first in the given range,
   regardless of type.

 - an OFD lock selftest

 - bugfix involving a UAF in a tracepoint

 - comment typo fix

* tag 'filelock-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
  locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock
  fs/locks: Fix typo
  selftests: add OFD lock tests
  fs/locks: F_UNLCK extension for F_OFD_GETLK

Pull procfs fixes from Christian Brauner:
 "Mode changes to files under /proc/<pid>/ aren't supported ever since
  commit 6d76fa58 ("Don't allow chmod() on the /proc/<pid>/ files").

  Due to an oversight in commit 1b3044e3 ("procfs: fix pthread
  cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
  mode changes on /proc/thread-self/comm were accidently allowed.

  Similar, mode changes for all files beneath /proc/<pid>/net/ are
  blocked but mode changes on /proc/<pid>/net itself were accidently
  allowed.

  Both issues come down to not using the generic proc_setattr() helper
  which blocks all mode changes. This is rectified with this pull
  request.

  This also removes a strange nolibc test that abused /proc/<pid>/net
  for testing mode changes. Using procfs for this test never made a lot
  of sense given procfs has special semantics for almost everything
  anway.

  Both changes are minor user-visible changes. It is however very
  unlikely that mode changes on proc/<pid>/net and
  /proc/thread-self/comm are something that userspace relies on"

* tag 'v6.6-fs.proc.uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  procfs: block chmod on /proc/thread-self/comm
  proc: use generic setattr() for /proc/$PID/net
  selftests/nolibc: drop test chmod_net

Pull autofs fixes from Christian Brauner:
 "This fixes a memory leak in autofs reported by syzkaller and a missing
  conversion from uninterruptible to interruptible wake up when autofs
  is in catatonic mode"

* tag 'v6.6-vfs.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  autofs: use wake_up() instead of wake_up_interruptible(()
  autofs: fix memory leak of waitqueues in autofs_catatonic_mode

Pull fchmodat2 system call from Christian Brauner:
 "This adds the fchmodat2() system call. It is a revised version of the
  fchmodat() system call, adding a missing flag argument. Support for
  both AT_SYMLINK_NOFOLLOW and AT_EMPTY_PATH are included.

  Adding this system call revision has been a longstanding request but
  so far has always fallen through the cracks. While the kernel
  implementation of fchmodat() does not have a flag argument the libc
  provided POSIX-compliant fchmodat(3) version does. Both glibc and musl
  have to implement a workaround in order to support AT_SYMLINK_NOFOLLOW
  (see [1] and [2]).

  The workaround is brittle because it relies not just on O_PATH and
  O_NOFOLLOW semantics and procfs magic links but also on our rather
  inconsistent symlink semantics.

  This gives userspace a proper fchmodat2() system call that libcs can
  use to properly implement fchmodat(3) and allows them to get rid of
  their hacks. In this case it will immediately benefit them as the
  current workaround is already defunct because of aformentioned
  inconsistencies.

  In addition to AT_SYMLINK_NOFOLLOW, give userspace the ability to use
  AT_EMPTY_PATH with fchmodat2(). This is already possible with
  fchownat() so there's no reason to not also support it for
  fchmodat2().

  The implementation is simple and comes with selftests. Implementation
  of the system call and wiring up the system call are done as separate
  patches even though they could arguably be one patch. But in case
  there are merge conflicts from other system call additions it can be
  beneficial to have separate patches"

Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=17eca54051ee28ba1ec3f9aed170a62630959143;hb=a492b1e5ef7ab50c6fdd4e4e9879ea5569ab0a6c#l35 [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c?id=718f363bc2067b6487900eddc9180c84e7739f80#n28 [2]

* tag 'v6.6-vfs.fchmodat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  selftests: fchmodat2: remove duplicate unneeded defines
  fchmodat2: add support for AT_EMPTY_PATH
  selftests: Add fchmodat2 selftest
  arch: Register fchmodat2, usually as syscall 452
  fs: Add fchmodat2()
  Non-functional cleanup of a "__user * filename"

Pull superblock updates from Christian Brauner:
 "This contains the super rework that was ready for this cycle. The
  first part changes the order of how we open block devices and allocate
  superblocks, contains various cleanups, simplifications, and a new
  mechanism to wait on superblock state changes.

  This unblocks work to ultimately limit the number of writers to a
  block device. Jan has already scheduled follow-up work that will be
  ready for v6.7 and allows us to restrict the number of writers to a
  given block device. That series builds on this work right here.

  The second part contains filesystem freezing updates.

  Overview:

  The generic superblock changes are rougly organized as follows
  (ignoring additional minor cleanups):

   (1) Removal of the bd_super member from struct block_device.

       This was a very odd back pointer to struct super_block with
       unclear rules. For all relevant places we have other means to get
       the same information so just get rid of this.

   (2) Simplify rules for superblock cleanup.

       Roughly, everything that is allocated during fs_context
       initialization and that's stored in fs_context->s_fs_info needs
       to be cleaned up by the fs_context->free() implementation before
       the superblock allocation function has been called successfully.

       After sget_fc() returned fs_context->s_fs_info has been
       transferred to sb->s_fs_info at which point sb->kill_sb() if
       fully responsible for cleanup. Adhering to these rules means that
       cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
       brittle and inconsistent.

       Cleanup shouldn't be duplicated between sb->put_super() as
       sb->put_super() is only called if sb->s_root has been set aka
       when the filesystem has been successfully born (SB_BORN). That
       complexity should be avoided.

       This also means that block devices are to be closed in
       sb->kill_sb() instead of sb->put_super(). More details in the
       lower section.

   (3) Make it possible to lookup or create a superblock before opening
       block devices

       There's a subtle dependency on (2) as some filesystems did rely
       on fill_super() to be called in order to correctly clean up
       sb->s_fs_info. All these filesystems have been fixed.

   (4) Switch most filesystem to follow the same logic as the generic
       mount code now does as outlined in (3).

   (5) Use the superblock as the holder of the block device. We can now
       easily go back from block device to owning superblock.

   (6) Export and extend the generic fs_holder_ops and use them as
       holder ops everywhere and remove the filesystem specific holder
       ops.

   (7) Call from the block layer up into the filesystem layer when the
       block device is removed, allowing to shut down the filesystem
       without risk of deadlocks.

   (8) Get rid of get_super().

       We can now easily go back from the block device to owning
       superblock and can call up from the block layer into the
       filesystem layer when the device is removed. So no need to wade
       through all registered superblock to find the owning superblock
       anymore"

Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/

* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
  super: use higher-level helper for {freeze,thaw}
  super: wait until we passed kill super
  super: wait for nascent superblocks
  super: make locking naming consistent
  super: use locking helpers
  fs: simplify invalidate_inodes
  fs: remove get_super
  block: call into the file system for ioctl BLKFLSBUF
  block: call into the file system for bdev_mark_dead
  block: consolidate __invalidate_device and fsync_bdev
  block: drop the "busy inodes on changed media" log message
  dasd: also call __invalidate_device when setting the device offline
  amiflop: don't call fsync_bdev in FDFMTBEG
  floppy: call disk_force_media_change when changing the format
  block: simplify the disk_force_media_change interface
  nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
  xfs use fs_holder_ops for the log and RT devices
  xfs: drop s_umount over opening the log and RT devices
  ext4: use fs_holder_ops for the log device
  ext4: drop s_umount over opening the log device
  ...

Pull misc vfs updates from Christian Brauner:
 "This contains the usual miscellaneous features, cleanups, and fixes
  for vfs and individual filesystems.

  Features:

   - Block mode changes on symlinks and rectify our broken semantics

   - Report file modifications via fsnotify() for splice

   - Allow specifying an explicit timeout for the "rootwait" kernel
     command line option. This allows to timeout and reboot instead of
     always waiting indefinitely for the root device to show up

   - Use synchronous fput for the close system call

  Cleanups:

   - Get rid of open-coded lockdep workarounds for async io submitters
     and replace it all with a single consolidated helper

   - Simplify epoll allocation helper

   - Convert simple_write_begin and simple_write_end to use a folio

   - Convert page_cache_pipe_buf_confirm() to use a folio

   - Simplify __range_close to avoid pointless locking

   - Disable per-cpu buffer head cache for isolated cpus

   - Port ecryptfs to kmap_local_page() api

   - Remove redundant initialization of pointer buf in pipe code

   - Unexport the d_genocide() function which is only used within core
     vfs

   - Replace printk(KERN_ERR) and WARN_ON() with WARN()

  Fixes:

   - Fix various kernel-doc issues

   - Fix refcount underflow for eventfds when used as EFD_SEMAPHORE

   - Fix a mainly theoretical issue in devpts

   - Check the return value of __getblk() in reiserfs

   - Fix a racy assert in i_readcount_dec

   - Fix integer conversion issues in various functions

   - Fix LSM security context handling during automounts that prevented
     NFS superblock sharing"

* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
  cachefiles: use kiocb_{start,end}_write() helpers
  ovl: use kiocb_{start,end}_write() helpers
  aio: use kiocb_{start,end}_write() helpers
  io_uring: use kiocb_{start,end}_write() helpers
  fs: create kiocb_{start,end}_write() helpers
  fs: add kerneldoc to file_{start,end}_write() helpers
  io_uring: rename kiocb_end_write() local helper
  splice: Convert page_cache_pipe_buf_confirm() to use a folio
  libfs: Convert simple_write_begin and simple_write_end to use a folio
  fs/dcache: Replace printk and WARN_ON by WARN
  fs/pipe: remove redundant initialization of pointer buf
  fs: Fix kernel-doc warnings
  devpts: Fix kernel-doc warnings
  doc: idmappings: fix an error and rephrase a paragraph
  init: Add support for rootwait timeout parameter
  vfs: fix up the assert in i_readcount_dec
  fs: Fix one kernel-doc comment
  docs: filesystems: idmappings: clarify from where idmappings are taken
  fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
  vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
  ...

Pull libfs and tmpfs updates from Christian Brauner:
 "This cycle saw a lot of work for tmpfs that required changes to the
  vfs layer. Andrew, Hugh, and I decided to take tmpfs through vfs this
  cycle. Things will go back to mm next cycle.

  Features
  ========

   - By far the biggest work is the quota support for tmpfs. New tmpfs
     quota infrastructure is added to support it and a new QFMT_SHMEM
     uapi option is exposed.

     This offers user and group quotas to tmpfs (project quotas will be
     added later). Similar to other filesystems tmpfs quota are not
     supported within user namespaces yet.

   - Add support for user xattrs. While tmpfs already supports security
     xattrs (security.*) and POSIX ACLs for a long time it lacked
     support for user xattrs (user.*). With this pull request tmpfs will
     be able to support a limited number of user xattrs.

     This is accompanied by a fix (see below) to limit persistent simple
     xattr allocations.

   - Add support for stable directory offsets. Currently tmpfs relies on
     the libfs provided cursor-based mechanism for readdir. This causes
     issues when a tmpfs filesystem is exported via NFS.

     NFS clients do not open directories. Instead, each server-side
     readdir operation opens the directory, reads it, and then closes
     it. Since the cursor state for that directory is associated with
     the opened file it is discarded after each readdir operation. Such
     directory offsets are not just cached by NFS clients but also
     various userspace libraries based on these clients.

     As it stands there is no way to invalidate the caches when
     directory offsets have changed and the whole application depends on
     unchanging directory offsets.

     At LSFMM we discussed how to solve this problem and decided to
     support stable directory offsets. libfs now allows filesystems like
     tmpfs to use an xarrary to map a directory offset to a dentry. This
     mechanism is currently only used by tmpfs but can be supported by
     others as well.

  Fixes
  =====

   - Change persistent simple xattrs allocations in libfs from
     GFP_KERNEL to GPF_KERNEL_ACCOUNT so they're subject to memory
     cgroup limits. Since this is a change to libfs it affects both
     tmpfs and kernfs.

   - Correctly verify {g,u}id mount options.

     A new filesystem context is created via fsopen() which records the
     namespace that becomes the owning namespace of the superblock when
     fsconfig(FSCONFIG_CMD_CREATE) is called for filesystems that are
     mountable in namespaces. However, fsconfig() calls can occur in a
     namespace different from the namespace where fsopen() has been
     called.

     Currently, when fsconfig() is called to set {g,u}id mount options
     the requested {g,u}id is mapped into a k{g,u}id according to the
     namespace where fsconfig() was called from. The resulting k{g,u}id
     is not guaranteed to be resolvable in the namespace of the
     filesystem (the one that fsopen() was called in).

     This means it's possible for an unprivileged user to create files
     owned by any group in a tmpfs mount since it's possible to set the
     setid bits on the tmpfs directory.

     The contract for {g,u}id mount options and {g,u}id values in
     general set from userspace has always been that they are translated
     according to the caller's idmapping. In so far, tmpfs has been
     doing the correct thing. But since tmpfs is mountable in
     unprivileged contexts it is also necessary to verify that the
     resulting {k,g}uid is representable in the namespace of the
     superblock to avoid such bugs.

     The new mount api's cross-namespace delegation abilities are
     already widely used. Having talked to a bunch of userspace this is
     the most faithful solution with minimal regression risks"

* tag 'v6.6-vfs.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  tmpfs,xattr: GFP_KERNEL_ACCOUNT for simple xattrs
  mm: invalidation check mapping before folio_contains
  tmpfs: trivial support for direct IO
  tmpfs,xattr: enable limited user extended attributes
  tmpfs: track free_ispace instead of free_inodes
  xattr: simple_xattr_set() return old_xattr to be freed
  tmpfs: verify {g,u}id mount options correctly
  shmem: move spinlock into shmem_recalc_inode() to fix quota support
  libfs: Remove parent dentry locking in offset_iterate_dir()
  libfs: Add a lock class for the offset map's xa_lock
  shmem: stable directory offsets
  shmem: Refactor shmem_symlink()
  libfs: Add directory operations for stable offsets
  shmem: fix quota lock nesting in huge hole handling
  shmem: Add default quota limit mount options
  shmem: quota support
  shmem: prepare shmem quota infrastructure
  quota: Check presence of quota operation structures instead of ->quota_read and ->quota_write callbacks
  shmem: make shmem_get_inode() return ERR_PTR instead of NULL
  shmem: make shmem_inode_acct_block() return error

Pull vfs timestamp updates from Christian Brauner:
 "This adds VFS support for multi-grain timestamps and converts tmpfs,
  xfs, ext4, and btrfs to use them. This carries acks from all relevant
  filesystems.

  The VFS always uses coarse-grained timestamps when updating the ctime
  and mtime after a change. This has the benefit of allowing filesystems
  to optimize away a lot of metadata updates, down to around 1 per
  jiffy, even when a file is under heavy writes.

  Unfortunately, this has always been an issue when we're exporting via
  NFSv3, which relies on timestamps to validate caches. A lot of changes
  can happen in a jiffy, so timestamps aren't sufficient to help the
  client decide to invalidate the cache.

  Even with NFSv4, a lot of exported filesystems don't properly support
  a change attribute and are subject to the same problems with timestamp
  granularity. Other applications have similar issues with timestamps
  (e.g., backup applications).

  If we were to always use fine-grained timestamps, that would improve
  the situation, but that becomes rather expensive, as the underlying
  filesystem would have to log a lot more metadata updates.

  This introduces fine-grained timestamps that are used when they are
  actively queried.

  This uses the 31st bit of the ctime tv_nsec field to indicate that
  something has queried the inode for the mtime or ctime. When this flag
  is set, on the next mtime or ctime update, the kernel will fetch a
  fine-grained timestamp instead of the usual coarse-grained one.

  As POSIX generally mandates that when the mtime changes, the ctime
  must also change the kernel always stores normalized ctime values, so
  only the first 30 bits of the tv_nsec field are ever used.

  Filesytems can opt into this behavior by setting the FS_MGTIME flag in
  the fstype. Filesystems that don't set this flag will continue to use
  coarse-grained timestamps.

  Various preparatory changes, fixes and cleanups are included:

   - Fixup all relevant places where POSIX requires updating ctime
     together with mtime. This is a wide-range of places and all
     maintainers provided necessary Acks.

   - Add new accessors for inode->i_ctime directly and change all
     callers to rely on them. Plain accesses to inode->i_ctime are now
     gone and it is accordingly rename to inode->__i_ctime and commented
     as requiring accessors.

   - Extend generic_fillattr() to pass in a request mask mirroring in a
     sense the statx() uapi. This allows callers to pass in a request
     mask to only get a subset of attributes filled in.

   - Rework timestamp updates so it's possible to drop the @now
     parameter the update_time() inode operation and associated helpers.

   - Add inode_update_timestamps() and convert all filesystems to it
     removing a bunch of open-coding"

* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
  btrfs: convert to multigrain timestamps
  ext4: switch to multigrain timestamps
  xfs: switch to multigrain timestamps
  tmpfs: add support for multigrain timestamps
  fs: add infrastructure for multigrain timestamps
  fs: drop the timespec64 argument from update_time
  xfs: have xfs_vn_update_time gets its own timestamp
  fat: make fat_update_time get its own timestamp
  fat: remove i_version handling from fat_update_time
  ubifs: have ubifs_update_time use inode_update_timestamps
  btrfs: have it use inode_update_timestamps
  fs: drop the timespec64 arg from generic_update_time
  fs: pass the request_mask to generic_fillattr
  fs: remove silly warning from current_time
  gfs2: fix timestamp handling on quota inodes
  fs: rename i_ctime field to __i_ctime
  selinux: convert to ctime accessor functions
  security: convert to ctime accessor functions
  apparmor: convert to ctime accessor functions
  sunrpc: convert to ctime accessor functions
  ...

Pull mount API updates from Christian Brauner:
 "This introduces FSCONFIG_CMD_CREATE_EXCL which allows userspace to
  implement something like

      $ mount -t ext4 --exclusive /dev/sda /B

  which fails if a superblock for the requested filesystem does already
  exist instead of silently reusing an existing superblock.

  Without it, in the sequence

      $ move-mount -f xfs -o       source=/dev/sda4 /A
      $ move-mount -f xfs -o noacl,source=/dev/sda4 /B

  the initial mounter will create a superblock. The second mounter will
  reuse the existing superblock, creating a bind-mount (see [1] for the
  source of the move-mount binary).

  The problem is that reusing an existing superblock means all mount
  options other than read-only and read-write will be silently ignored
  even if they are incompatible requests. For example, the second mount
  has requested no POSIX ACL support but since the existing superblock
  is reused POSIX ACL support will remain enabled.

  Such silent superblock reuse can easily become a security issue.

  After adding support for FSCONFIG_CMD_CREATE_EXCL to mount(8) in
  util-linux this can be fixed:

      $ move-mount -f xfs --exclusive -o       source=/dev/sda4 /A
      $ move-mount -f xfs --exclusive -o noacl,source=/dev/sda4 /B
      Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed

  This requires the new mount api. With the old mount api it would be
  necessary to plumb this through every legacy filesystem's
  file_system_type->mount() method. If they want this feature they are
  most welcome to switch to the new mount api"

Link: https://github.com/brauner/move-mount-beneath [1]
Link: https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Link: https://lore.kernel.org/lkml/20230824-anzog-allheilmittel-e8c63e429a79@brauner/

* tag 'v6.6-vfs.fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
  fs: add FSCONFIG_CMD_CREATE_EXCL
  fs: add vfs_cmd_reconfigure()
  fs: add vfs_cmd_create()
  super: remove get_tree_single_reconf()

Pull SCSI fixes from James Bottomley:
 "Three small driver fixes and one larger unused function set removal in
  the raid class (so no external impact)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: snic: Fix double free in snic_tgt_create()
  scsi: core: raid_class: Remove raid_component_add()
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
  scsi: ufs: mcq: Fix the search/wrap around logic

Pull x86 fixes from Ingo Molnar:
 "Fix an FPU invalidation bug on exec(), and fix a performance
  regression due to a missing setting of X86_FEATURE_OSXSAVE"

* tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4
  x86/fpu: Invalidate FPU state correctly on exec()

Pull irq fix from Thomas Gleixner:
 "A last minute fix for a regression introduced in the v6.5 merge
  window.

  The conversion of the software based interrupt resend mechanism to
  hlist missed to add a check whether the descriptor is already enqueued
  and dropped the interrupt descriptor lookup for nested interrupts.

  The missing check whether the descriptor is already queued causes
  hlist corruption and can be observed in the wild. The dropped parent
  descriptor lookup has not yet caused problems, but it would result in
  stale interrupt line in the worst case.

  Add the missing enqueued check and bring the descriptor lookup back to
  cure this"

* tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Fix software resend lockup and nested resend

Merge tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and
  some trivial cleanups"

* tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Fix hw_breakpoint_control() for watchpoints
  LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
  LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
  LoongArch: Add identifier names to arguments of die() declaration
  LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
  LoongArch: Remove <asm/export.h>
  LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
  LoongArch: Remove unneeded #include <asm/export.h>
  LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
  LoongArch: Remove redundant "source drivers/firmware/Kconfig"

The switch to using hlist for managing software resend of interrupts
broke resend in at least two ways:

First, unconditionally adding interrupt descriptors to the resend list can
corrupt the list when the descriptor in question has already been
added. This causes the resend tasklet to loop indefinitely with interrupts
disabled as was recently reported with the Lenovo ThinkPad X13s after
threaded NAPI was disabled in the ath11k WiFi driver.

This bug is easily fixed by restoring the old semantics of irq_sw_resend()
so that it can be called also for descriptors that have already been marked
for resend.

Second, the offending commit also broke software resend of nested
interrupts by simply discarding the code that made sure that such
interrupts are retriggered using the parent interrupt.

Add back the corresponding code that adds the parent descriptor to the
resend list.

Fixes: bc06a9e0 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/
Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org

In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the
MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to
add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally.

Otherwise we can't set read watchpoint and write watchpoint separately.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

This is a port of commit 379eb01c ("riscv: Ensure the value
of FP registers in the core dump file is up to date").

The values of FP/SIMD registers in the core dump file come from the
thread.fpu. However, kernel saves the FP/SIMD registers only before
scheduling out the process. If no process switch happens during the
exception handling, kernel will not have a chance to save the latest
values of FP/SIMD registers. So it may cause their values in the core
dump file incorrect. To solve this problem, force fpr_get()/simd_get()
to save the FP/SIMD registers into the thread.fpu if the target task
equals the current task.

Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull clk fixes from Stephen Boyd:
 "One clk driver fix and two clk framework fixes:

   - Fix an OOB access when devm_get_clk_from_child() is used and
     devm_clk_release() casts the void pointer to the wrong type

   - Move clk_rate_exclusive_{get,put}() within the correct ifdefs in
     clk.h so that the stubs are used when CONFIG_COMMON_CLK=n

   - Register the proper clk provider function depending on the value of
     #clock-cells in the TI keystone driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Fix slab-out-of-bounds error in devm_clk_release()
  clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'
  clk: keystone: syscon-clk: Fix audio refclk

The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.

But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.

This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.

This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:

 a) Some architectures have assembly instructions to count the bits and
    which are used instead of calling __clzdi2(), e.g. on x86 the bsr
    instruction and on ppc cntlz is used. On such architectures the
    wrong __clzdi2() implementation isn't used and as such the bug has
    no effect and won't be noticed.

 b) Some architectures link to libgcc.a, and the in-kernel weak
    functions get replaced by the correct 64-bit variants from libgcc.a.

 c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
    places in the kernel, and most likely only in uncritical functions,
    e.g. when printing hex values via seq_put_hex_ll(). The wrong return
    value will still print the correct number, but just in a wrong
    formatting (e.g. with too many leading zeroes).

 d) 32-bit kernels aren't used that much any longer, so they are less
    tested.

A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:

Here the kernel uses a correct implementation of __clzdi2():

  root@debian:~# cat /proc/self/maps
  00010000-00019000 r-xp 00000000 08:05 787324     /usr/bin/cat
  00019000-0001a000 rwxp 00009000 08:05 787324     /usr/bin/cat
  0001a000-0003b000 rwxp 00000000 00:00 0          [heap]
  f7551000-f770d000 r-xp 00000000 08:05 794765     /usr/lib/hppa-linux-gnu/libc.so.6
  ...

and this kernel uses the broken implementation of __clzdi2():

  root@debian:~# cat /proc/self/maps
  0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324  /usr/bin/cat
  0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324  /usr/bin/cat
  000000001a000-000000003b000 rwxp 00000000 00:00 0  [heap]
  00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765  /usr/lib/hppa-linux-gnu/libc.so.6
  ...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
  issues or aren't considered suitable for a -stable backport"

* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  shmem: fix smaps BUG sleeping while atomic
  selftests: cachestat: catch failing fsync test on tmpfs
  selftests: cachestat: test for cachestat availability
  maple_tree: disable mas_wr_append() when other readers are possible
  madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
  madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
  madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
  mm: multi-gen LRU: don't spin during memcg release
  mm: memory-failure: fix unexpected return value in soft_offline_page()
  radix tree: remove unused variable
  mm: add a call to flush_cache_vmap() in vmap_pfn()
  selftests/mm: FOLL_LONGTERM need to be updated to 0x100
  nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
  mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
  selftests: cgroup: fix test_kmem_basic less than error
  mm: enable page walking API to lock vmas during the walk
  smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
  mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT

Pull RISC-V fixes from Palmer Dabbelt:
 "This is obviously not ideal, particularly for something this late in
  the cycle.

  Unfortunately we found some uABI issues in the vector support while
  reviewing the GDB port, which has triggered a revert -- probably a
  good sign we should have reviewed GDB before merging this, I guess I
  just dropped the ball because I was so worried about the context
  extension and libc suff I forgot. Hence the late revert.

  There's some risk here as we're still exposing the vector context for
  signal handlers, but changing that would have meant reverting all of
  the vector support. The issues we've found so far have been fixed
  already and they weren't absolute showstoppers, so we're essentially
  just playing it safe by holding ptrace support for another release (or
  until we get through a proper userspace code review).

  Summary:

   - The vector ucontext extension has been extended with vlenb

   - The vector registers ELF core dump note type has been changed to
     avoid aliasing with the CSR type used in embedded systems

   - Support for accessing vector registers via ptrace() has been
     reverted

   - Another build fix for the ISA spec changes around Zifencei/Zicsr
     that manifests on some systems built with binutils-2.37 and
     gcc-11.2"

* tag 'riscv-for-linus-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Fix build errors using binutils2.37 toolchains
  RISC-V: vector: export VLENB csr in __sc_riscv_v_state
  RISC-V: Remove ptrace support for vectors

Pull gpio fixes from Bartosz Golaszewski:

 - fix an irq mapping leak in gpio-sim

 - associate the GPIO device's software node with the irq domain in
   gpio-sim

* tag 'gpio-fixes-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: sim: pass the GPIO device's software node to irq domain
  gpio: sim: dispose of irq mappings before destroying the irq_sim domain

Pull pin control fixes from Linus Walleij:
 "Here are some Renesas and AMD driver fixes, the AMD fix affects
  important laptops in the wild so this one is pretty important. It
  seems a bit tough to get this right.

   - Fix DT parsing and related locking in the Renesas driver.

   - Fix wakeup IRQs in the AMD driver once again. Really tricky this
     one"

* tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: amd: Mask wake bits on probe again
  pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}
  pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map()
  pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()

Pull sound fixes from Takashi Iwai:
 "Hopefully the last bits for 6.5. It's slightly higher LOCs than
  wished, but it doesn't look scary.

  The biggest change is MAINTAINERS update for TI; it's good to have the
  update before the final release, so that people can contact to the
  right persons for bug reports (which shouldn't happen of course!)

  The rest are all device-specific fixes and quirks, most for various
  ASoC platforms"

* tag 'sound-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ
  ALSA: ymfpci: Fix the missing snd_card_free() call at probe error
  ASoC: cs35l41: Correct amp_gain_tlv values
  ASoC: amd: yc: Add VivoBook Pro 15 to quirks list for acp6x
  ASoC: tas2781: fixed register access error when switching to other chips
  ASoC: cs35l56: Add an ACPI match table
  ASoC: cs35l56: Read firmware uuid from a device property instead of _SUB
  ASoC: SOF: ipc4-pcm: fix possible null pointer deference
  MAINTAINERS: Add entries for TEXAS INSTRUMENTS ASoC DRIVERS

The initial aim is to silence the following objtool warning:

arch/loongarch/kernel/process.o: warning: objtool: arch_cpu_idle_dead() falls through to next function start_thread()

According to tools/objtool/Documentation/objtool.txt, this is because
the last instruction of arch_cpu_idle_dead() is a call to a noreturn
function play_dead(). In order to silence the warning, one simple way
is to add the noreturn function play_dead() to objtool's hard-coded
global_noreturns array, that is to say, just put "NORETURN(play_dead)"
into tools/objtool/noreturns.h, it works well.

But I noticed that play_dead() is only defined once and only called by
arch_cpu_idle_dead(), so put the body of play_dead() into the caller
arch_cpu_idle_dead(), then remove the noreturn function play_dead() is
an alternative way which can reduce the overhead of the function call
at the same time.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Add identifier names to arguments of die() declaration in ptrace.h
to fix the following checkpatch warnings:

  WARNING: function definition argument 'const char *' should also have an identifier name
  WARNING: function definition argument 'struct pt_regs *' should also have an identifier name
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

After the call to oops_exit(), it should not panic or execute
the crash kernel if the oops is to be suppressed.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

If notify_die() returns NOTIFY_STOP, honor the return value from the
handler chain invocation in die() and return without killing the task
as, through a debugger, the fault may have been fixed. It makes sense
even if ignoring the event will make the system unstable: by allowing
access through a debugger it has been compromised already anyway. It
makes our port consistent with x86, arm64, riscv and csky.

Commit 20c0d2d4 ("[PATCH] i386: pass proper trap numbers to die
chain handlers") may be the earliest of similar changes.

Link: https://lore.kernel.org/r/43DDF02E.76F0.0078.0@novell.com/Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

All *.S files under arch/loongarch/ have been converted to include
<linux/export.h> instead of <asm/export.h>.

Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Commit ddb5cdba ("kbuild: generate KSYMTAB entries by modpost")
deprecated <asm/export.h>, which is now a wrapper of <linux/export.h>.

Replace #include <asm/export.h> with #include <linux/export.h>.

After all the <asm/export.h> lines are converted, <asm/export.h> and
<asm-generic/export.h> will be removed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

There is no EXPORT_SYMBOL() line there, hence #include <asm/export.h>
is unneeded.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

As explained by Nick in the original issue: the kernel usually does a
good job of providing library helpers that have similar semantics as
their ordinary userspace libc equivalents, but -ffreestanding disables
such libcall optimization and other related features in the compiler,
which can lead to unexpected things such as CONFIG_FORTIFY_SOURCE not
working (!).

However, due to the desire for better control over unaligned accesses
with respect to CONFIG_ARCH_STRICT_ALIGN, and also for avoiding the
GCC bug https://gcc.gnu.org/PR109465, we do want to still disable
optimizations for the memory libcalls (memcpy, memmove and memset for
now). Use finer-grained -fno-builtin-* toggles to achieve this without
losing source fortification and other libcall optimizations.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1897Reported-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

In drivers/Kconfig, drivers/firmware/Kconfig is sourced for all ports so
there is no need to source it in the port-specific Kconfig file.  And
sourcing it here also caused the "Firmware Drivers" menu appeared two
times: one in the "Device Drivers" menu, another in the toplevel menu.
This is really puzzling so remove it.
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>

Pull drm fixes from Dave Airlie:
 "A bit bigger than I'd care for, but it's mostly a single vmwgfx fix
  and a fix for an i915 hotplug probing. Otherwise misc i915, bridge,
  panfrost and dma-buf fixes.

  core:
   - add a HPD poll helper

  i915:
   - fix regression in i915 polling
   - fix docs build warning
   - fix DG2 idle power consumption

  bridge:
   - samsung-dsim: init fix

  panfrost:
   - fix speed binning issue

  dma-buf:
   - fix recursive lock in fence signal

  vmwgfx:
   - fix shader stage validation
   - fix NULL ptr derefs in gem put"

* tag 'drm-fixes-2023-08-25' of git://anongit.freedesktop.org/drm/drm:
  drm/i915: Fix HPD polling, reenabling the output poll work as needed
  drm: Add an HPD poll helper to reschedule the poll work
  drm/vmwgfx: Fix possible invalid drm gem put calls
  drm/vmwgfx: Fix shader stage validation
  dma-buf/sw_sync: Avoid recursive lock during fence signal
  drm/i915: fix Sphinx indentation warning
  drm/i915/dgfx: Enable d3cold at s2idle
  drm/display/dp: Fix the DP DSC Receiver cap size
  drm/panfrost: Skip speed binning on EOPNOTSUPP
  drm: bridge: samsung-dsim: Fix init during host transfer

Merge tag 'asoc-fix-v6.5-rc7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Quirk for v6.5

One additional fix for v6.5, an additional quirk.  As with the other
fixes this could wait for the merge window.

Pull tracing fixes from Steven Rostedt:

 - Fix ring buffer being permanently disabled due to missed
   record_disabled()

   Changing the trace cpu mask will disable the ring buffers for the
   CPUs no longer in the mask. But it fails to update the snapshot
   buffer. If a snapshot takes place, the accounting for the ring buffer
   being disabled is corrupted and this can lead to the ring buffer
   being permanently disabled.

 - Add test case for snapshot and cpu mask working together

 - Fix memleak by the function graph tracer not getting closed properly.

   The iterator is used to read the ring buffer. When it opens, it calls
   the open function of a tracer, and when it is closed, it calls the
   close iteration. While a trace is being read, it is still possible to
   change the tracer.

   If this happens between the function graph tracer and the wakeup
   tracer (which uses function graph tracing), the tracers are not
   closed properly during when the iterator sees the switch, and the
   wakeup function did not initialize its private pointer to NULL, which
   is used to know if the function graph tracer was the last tracer. It
   could be fooled in thinking it is, but then on exit it does not call
   the close function of the function graph tracer to clean up its data.

 - Fix synthetic events on big endian machines, by introducing a union
   that does the conversions properly.

 - Fix synthetic events from printing out the number of elements in the
   stacktrace when it shouldn't.

 - Fix synthetic events stacktrace to not print a bogus value at the
   end.

 - Introduce a pipe_cpumask that prevents the trace_pipe files from
   being opened by more than one task (file descriptor).

   There was a race found where if splice is called, the iter->ent could
   become stale and events could be missed. There's no point reading a
   producer/consumer file by more than one task as they will corrupt
   each other anyway. Add a cpumask that keeps track of the per_cpu
   trace_pipe files as well as the global trace_pipe file that prevents
   more than one open of a trace_pipe file that represents the same ring
   buffer. This prevents the race from happening.

 - Fix ftrace samples for arm64 to work with older compilers.

* tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  samples: ftrace: Replace bti assembly with hint for older compiler
  tracing: Introduce pipe_cpumask to avoid race on trace_pipes
  tracing: Fix memleak due to race between current_tracer and trace
  tracing/synthetic: Allocate one additional element for size
  tracing/synthetic: Skip first entry for stack traces
  tracing/synthetic: Use union instead of casts
  selftests/ftrace: Add a basic testcase for snapshot
  tracing: Fix cpu buffers unavailable due to 'record_disabled' missed

Commit 41320b18 ("scsi: snic: Fix possible memory leak if device_add()
fails") fixed the memory leak caused by dev_set_name() when device_add()
failed. However, it did not consider that 'tgt' has already been released
when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path
to avoid double free of 'tgt' and move put_device(&tgt->dev) after the
removed kfree(tgt) to avoid a use-after-free.

Fixes: 41320b18 ("scsi: snic: Fix possible memory leak if device_add() fails")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230819083941.164365-1-wangzhu9@huawei.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>