Pull s390 updates from Alexander Gordeev:

 - Fix a KVM crash on z12 and older machines caused by a wrong
   assumption that Query AP Configuration Information is always
   available.

 - Lower severity of excessive Hypervisor filesystem error messages
   when booting under KVM.

* tag 's390-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ap: fix crash on older machines based on QCI info missing
  s390/hypfs: avoid error message under KVM

Pull powerpc fixes from Michael Ellerman:

 - Fix atomic sleep warnings at boot due to get_phb_number() taking a
   mutex with a spinlock held on some machines.

 - Add missing PMU selftests to .gitignores.

Thanks to Guenter Roeck and Russell Currey.

* tag 'powerpc-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  selftests/powerpc: Add missing PMU selftests to .gitignores
  powerpc/pci: Fix get_phb_number() locking

Pull rdma fixes from Jason Gunthorpe:
 "A few minor fixes:

   - Fix buffer management in SRP to correct a regression with the login
     authentication feature from v5.17

   - Don't iterate over non-present ports in mlx5

   - Fix an error introduced by the foritify work in cxgb4

   - Two bug fixes for the recently merged ERDMA driver

   - Unbreak RDMA dmabuf support, a regresion from v5.19"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA: Handle the return code from dma_resv_wait_timeout() properly
  RDMA/erdma: Correct the max_qp and max_cq capacities of the device
  RDMA/erdma: Using the key in FMR WR instead of MR structure
  RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl size
  RDMA/mlx5: Use the proper number of ports
  IB/iser: Fix login with authentication

Pull block fixes from Jens Axboe:
 "A few fixes that should go into this release:

   - Small series of patches for ublk (ZiyangZhang)

   - Remove dead function (Yu)

   - Fix for running a block queue in case of resource starvation
     (Yufen)"

* tag 'block-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
  blk-mq: run queue no matter whether the request is the last request
  blk-mq: remove unused function blk_mq_queue_stopped()
  ublk_drv: do not add a re-issued request aborted previously to ioucmd's task_work
  ublk_drv: update comment for __ublk_fail_req()
  ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()
  ublk_drv: update iod->addr for UBLK_IO_NEED_GET_DATA

Pull io_uring fixes from Jens Axboe:
 "A few fixes for regressions in this cycle:

   - Two instances of using the wrong "has async data" helper (Pavel)

   - Fixup zero-copy address import (Pavel)

   - Bump zero-copy notification slot limit (Pavel)"

* tag 'io_uring-6.0-2022-08-19' of git://git.kernel.dk/linux-block:
  io_uring/net: use right helpers for async_data
  io_uring/notif: raise limit on notification slots
  io_uring/net: improve zc addr import error handling
  io_uring/net: use right helpers for async recycle

Pull ATA fixes from Damien Le Moal:

 - Add a missing command name definition for ata_get_cmd_name(), from
   me.

 - A fix to address a performance regression due to the default
   max_sectors queue limit for ATA devices connected to AHCI adapters
   being too small, from John.

* tag 'ata-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata: Set __ATA_BASE_SHT max_sectors
  ata: libata-eh: Add missing command name

Pull MMC host fixes from Ulf Hansson:

 - meson-gx: Fix error handling in ->probe()

 - mtk-sd: Fix a command problem when using cqe off/disable

 - pxamci: Fix error handling in ->probe()

 - sdhci-of-dwcmshc: Fix broken support for the BlueField-3 variant

* tag 'mmc-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-of-dwcmshc: Re-enable support for the BlueField-3 SoC
  mmc: meson-gx: Fix an error handling path in meson_mmc_probe()
  mmc: mtk-sd: Clear interrupts when cqe off/disable
  mmc: pxamci: Fix another error handling path in pxamci_probe()
  mmc: pxamci: Fix an error handling path in pxamci_probe()

Commit 0568e612 ("ata: libata-scsi: cap ata_device->max_sectors
according to shost->max_sectors") inadvertently capped the max_sectors
value for some SATA disks to a value which is lower than we would want.

For a device which supports LBA48, we would previously have request queue
max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively.

For AHCI controllers, the value chosen for shost max sectors comes from
the minimum of the SCSI host default max sectors in
SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit.

This means that we would now set the max_sectors_kb and max_hw_sectors_kb
values for a disk which supports LBA48 at 512, ignoring DMA mapping limit.

As report by Oliver at [0], this caused a performance regression.

Fix by picking a large enough max sectors value for ATA host controllers
such that we don't needlessly reduce max_sectors_kb for LBA48 disks.

[0] https://lore.kernel.org/linux-ide/YvsGbidf3na5FpGb@xsang-OptiPlex-9020/T/#m22d9fc5ad15af66066dd9fecf3d50f1b1ef11da3

Fixes: 0568e612 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors")
Reported-by: Oliver Sang <oliver.sang@intel.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

Pull execve fix from Kees Cook:

 - Replace remaining kmap() uses with kmap_local_page() (Fabio M. De
   Francesco)

* tag 'execve-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  exec: Replace kmap{,_atomic}() with kmap_local_page()

Pull hardening fixes from Kees Cook:

 - Also undef LATENT_ENTROPY_PLUGIN for per-file disabling (Andrew
   Donnellan)

 - Return EFAULT on copy_from_user() failures in LoadPin (Kees Cook)

* tag 'hardening-v6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file
  LoadPin: Return EFAULT on copy_from_user() failures

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to make the ISA extension static keys writable after init. This
   manifests at least as a crash when loading modules (including KVM).

 - A fixup for a build warning related to a poorly formed comment in our
   perf driver.

* tag 'riscv-for-linus-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  perf: riscv legacy: fix kerneldoc comment warning
  riscv: Ensure isa-ext static keys are writable

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK

   - Tidy-up handling of AArch32 on asymmetric systems

  x86:

   - Fix 'missing ENDBR' BUG for fastop functions

  Generic:

   - Some cleanup and static analyzer patches

   - More fixes to KVM_CREATE_VM unwind paths"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Drop unnecessary initialization of "ops" in kvm_ioctl_create_device()
  KVM: Drop unnecessary initialization of "npages" in hva_to_pfn_slow()
  x86/kvm: Fix "missing ENDBR" BUG for fastop functions
  x86/kvm: Simplify FOP_SETCC()
  x86/ibt, objtool: Add IBT_NOSEAL()
  KVM: Rename mmu_notifier_* to mmu_invalidate_*
  KVM: Rename KVM_PRIVATE_MEM_SLOTS to KVM_INTERNAL_MEM_SLOTS
  KVM: MIPS: remove unnecessary definition of KVM_PRIVATE_MEM_SLOTS
  KVM: Move coalesced MMIO initialization (back) into kvm_create_vm()
  KVM: Unconditionally get a ref to /dev/kvm module when creating a VM
  KVM: Properly unwind VM creation if creating debugfs fails
  KVM: arm64: Reject 32bit user PSTATE on asymmetric systems
  KVM: arm64: Treat PMCR_EL1.LC as RES1 on asymmetric systems
  KVM: arm64: Fix compile error due to sign extension

Pull btrfs fixes from David Sterba:
 "A few short fixes and a lockdep warning fix (needs moving some code):

   - tree-log replay fixes:
      - fix error handling when looking up extent refs
      - fix warning when setting inode number of links

   - relocation fixes:
      - reset block group read-only status when relocation fails
      - unset control structure if transaction fails when starting
        to process a block group
      - add lockdep annotations to fix a warning during relocation
        where blocks temporarily belong to another tree and can lead
        to reversed dependencies

   - tree-checker verifies that extent items don't overlap"

* tag 'for-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: tree-checker: check for overlapping extent items
  btrfs: fix warning during log replay when bumping inode link count
  btrfs: fix lost error handling when looking up extended ref on log replay
  btrfs: fix lockdep splat with reloc root extent buffers
  btrfs: move lockdep class helpers to locking.c
  btrfs: unset reloc control if transaction commit fails in prepare_to_relocate()
  btrfs: reset RO counter on block group if we fail to relocate

Pull ksmbd server fixes from Steve French:

 - important sparse file fix

 - allocation size fix

 - fix incorrect rc on bad share

 - share config fix

* tag '5.20-rc2-ksmbd-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: don't remove dos attribute xattr on O_TRUNC open
  ksmbd: remove unnecessary generic_fillattr in smb2_open
  ksmbd: request update to stale share config
  ksmbd: return STATUS_BAD_NETWORK_NAME error status if share is not configured

Pull sound fixes from Takashi Iwai:
 "The only significant core change is ASoC DPCM fix for asymmetric
  setup; other remaining changes are device-specific fixes, including
  the hardening of string manipulations.

  One change in platform/x86 is the patch I forgot to apply from a
  series for CS35L41 codec"

* tag 'sound-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ALSA: hda/realtek: Add quirk for Clevo NS50PU, NS70PU
  ALSA: info: Fix llseek return value when using callback
  ALSA: hda/cs8409: Support new Dolphin Variants
  platform/x86: serial-multi-instantiate: Add CLSA0101 Laptop
  ALSA: hda/realtek: Add quirk for Lenovo Yoga7 14IAL7
  ALSA: hda: cs35l41: Clarify support for CSC3551 without _DSD Properties
  ALSA: hda/realtek: Add quirks for ASUS Zenbooks using CS35L41
  ASoC: codec: tlv320aic32x4: fix mono playback via I2S
  ASoC: rt5640: Fix the JD voltage dropping issue
  ASoC: tas2770: Fix handling of mute/unmute
  ASoC: tas2770: Drop conflicting set_bias_level power setting
  ASoC: tas2770: Allow mono streams
  ASoC: tas2770: Set correct FSYNC polarity
  ASoC: Intel: fix sof_es8336 probe
  ASoC: DPCM: Don't pick up BE without substream
  ASoC: SOF: ipc3-topology: Fix clang -Wformat warning
  ASoC: sh: rz-ssi: Improve error handling in rz_ssi_probe() error path
  ASoC: SOF: Intel: hda: Fix potential buffer overflow by snprintf()
  ASoC: SOF: debug: Fix potential buffer overflow by snprintf()
  ASoC: Intel: avs: Fix potential buffer overflow by snprintf()
  ...

Pull drm fixes from Dave Airlie:
 "Regular weekly fixes.

  The nouveau patch just enables modesetting on GA103 hw which is like
  other ampere cards that are already supported. amdgpu has 2 weeks of
  fixes, as Alex was away, so a bit larger than usual, otherwise some
  i915 and misc other fixes.

  ttm:
   - NULL ptr dereference

  i915:
   - disable pci resize on 32-bit systems
   - don't leak the ccs state
   - TLB invalidation fixes

  nouveau:
   - GA103 enablement
   - off-by-one fix

  amdgpu:
   - Revert some DML stack changes
   - Rounding fixes in KFD allocations
   - atombios vram info table parsing fix
   - DCN 3.1.4 fixes
   - Clockgating fixes for various new IPs
   - SMU 13.0.4 fixes
   - DCN 3.1.4 FP fixes
   - TMDS fixes for YCbCr420 4k modes
   - DCN 3.2.x fixes
   - USB 4 fixes
   - SMU 13.0 fixes
   - SMU driver unload memory leak fixes
   - Display orientation fix
   - Regression fix for generic fbdev conversion
   - SDMA 6.x fixes
   - SR-IOV fixes
   - IH 6.x fixes
   - Use after free fix in bo list handling
   - Revert pipe1 support
   - XGMI hive reset fix

  amdkfd:
   - Fix potential crach in kfd_create_indirect_link_prop()

  imx:
   - warning fix

  meson:
   - refcounting fix

  lvds-codec:
   - error check fix

  sun4i:
   - underflow fix
   - dt-binding fix"

* tag 'drm-fixes-2022-08-19' of git://anongit.freedesktop.org/drm/drm: (109 commits)
  Revert "drm/amd/amdgpu: add pipe1 hardware support"
  drm/amdgpu: Fix use-after-free on amdgpu_bo_list mutex
  drm/amdgpu: Fix interrupt handling on ih_soft ring
  drm/amdgpu: Add secure display TA load for Renoir
  drm/amd/display: Include scaling factor for SubVP command
  drm/amdgpu/vcn: Return void from the stop_dbg_mode
  drm/amdgpu: remove useless condition in amdgpu_job_stop_all_jobs_on_sched()
  drm/amdgpu: Add decode_iv_ts helper for ih_v6 block
  drm/amd/display: add chip revision to DCN32
  drm/amd/display: avoid doing vm_init multiple time
  drm/amd/display: Use pitch when calculating size to cache in MALL
  drm/amd/display: Don't set DSC for phantom pipes
  drm/amd/display: Update clock table policy for DCN314
  drm/amd/display: Modify header inclusion pattern
  drm/amd/display: Fix plug/unplug external monitor will hang while playback MPO video
  drm/amd/display: Add debug parameter to retain default clock table
  drm/amdgpu: Increase tlb flush timeout for sriov
  drm/amd/display: do not compare integers of different widths
  drm/amd/display: Add reserved dc_log_type.
  drm/amd/display: Fix pixel clock programming
  ...

Pull bitmap updates from Yury Norov:
 "cpumask: UP optimisation fixes follow-up

  As an older version of the UP optimisation fixes was merged, not all
  review feedback has been implemented.

  This implements the feedback received on the merged version [1], and
  the respin [2], for changes related to <linux/cpumask.h> and
  lib/cpumask.c"

Link: https://lore.kernel.org/lkml/cover.1656777646.git.sander@svanheule.net/ [1]
Link: https://lore.kernel.org/lkml/cover.1659077534.git.sander@svanheule.net/ [2]

It spent for more than a week with no issues.

* tag 'bitmap-6.0-rc2' of https://github.com/norov/linux:
  lib/cpumask: drop always-true preprocessor guard
  lib/cpumask: add inline cpumask_next_wrap() for UP
  cpumask: align signatures of UP implementations

Commit c164fbb4("x86/mm: thread pgprot_t through
init_memory_mapping()") mistakenly used __pgprot() which doesn't respect
__default_kernel_pte_mask when setting PUD mapping.

Fix it by only setting the one bit we actually need (PSE) and leaving
the other bits (that have been properly masked) alone.

Fixes: c164fbb4 ("x86/mm: thread pgprot_t through init_memory_mapping()")
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kvmarm-fixes-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.0, take #1

- Fix unexpected sign extension of KVM_ARM_DEVICE_ID_MASK

- Tidy-up handling of AArch32 on asymmetric systems

The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819021535.483702-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The variable is initialized but it is only used after its assignment.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Message-Id: <20220819022804.483914-1-kunyu@nfschina.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The following BUG was reported:

  traps: Missing ENDBR: andw_ax_dx+0x0/0x10 [kvm]
  ------------[ cut here ]------------
  kernel BUG at arch/x86/kernel/traps.c:253!
  invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
   <TASK>
   asm_exc_control_protection+0x2b/0x30
  RIP: 0010:andw_ax_dx+0x0/0x10 [kvm]
  Code: c3 cc cc cc cc 0f 1f 44 00 00 66 0f 1f 00 48 19 d0 c3 cc cc cc
        cc 0f 1f 40 00 f3 0f 1e fa 20 d0 c3 cc cc cc cc 0f 1f 44 00 00
        <66> 0f 1f 00 66 21 d0 c3 cc cc cc cc 0f 1f 40 00 66 0f 1f 00 21
        d0

   ? andb_al_dl+0x10/0x10 [kvm]
   ? fastop+0x5d/0xa0 [kvm]
   x86_emulate_insn+0x822/0x1060 [kvm]
   x86_emulate_instruction+0x46f/0x750 [kvm]
   complete_emulated_mmio+0x216/0x2c0 [kvm]
   kvm_arch_vcpu_ioctl_run+0x604/0x650 [kvm]
   kvm_vcpu_ioctl+0x2f4/0x6b0 [kvm]
   ? wake_up_q+0xa0/0xa0

The BUG occurred because the ENDBR in the andw_ax_dx() fastop function
had been incorrectly "sealed" (converted to a NOP) by apply_ibt_endbr().

Objtool marked it to be sealed because KVM has no compile-time
references to the function.  Instead KVM calculates its address at
runtime.

Prevent objtool from annotating fastop functions as sealable by creating
throwaway dummy compile-time references to the functions.

Fixes: 6649fa87 ("x86/ibt,kvm: Add ENDBR to fastops")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Debugged-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <0d4116f90e9d0c1b754bb90c585e6f0415a1c508.1660837839.git.jpoimboe@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

SETCC_ALIGN and FOP_ALIGN are both 16.  Remove the special casing for
FOP_SETCC() and just make it a normal fastop.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <7c13d94d1a775156f7e36eed30509b274a229140.1660837839.git.jpoimboe@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a macro which prevents a function from getting sealed if there are
no compile-time references to it.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Message-Id: <20220818213927.e44fmxkoq4yj6ybn@treble>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The motivation of this renaming is to make these variables and related
helper functions less mmu_notifier bound and can also be used for non
mmu_notifier based page invalidation. mmu_invalidate_* was chosen to
better describe the purpose of 'invalidating' a page that those
variables are used for.

  - mmu_notifier_seq/range_start/range_end are renamed to
    mmu_invalidate_seq/range_start/range_end.

  - mmu_notifier_retry{_hva} helper functions are renamed to
    mmu_invalidate_retry{_hva}.

  - mmu_notifier_count is renamed to mmu_invalidate_in_progress to
    avoid confusion with mn_active_invalidate_count.

  - While here, also update kvm_inc/dec_notifier_count() to
    kvm_mmu_invalidate_begin/end() to match the change for
    mmu_notifier_count.

No functional change intended.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-3-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM_INTERNAL_MEM_SLOTS better reflects the fact those slots are KVM
internally used (invisible to userspace) and avoids confusion to future
private slots that can have different meaning.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Message-Id: <20220816125322.1110439-2-chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

KVM_PRIVATE_MEM_SLOTS defaults to zero, so it is not necessary to
define it in MIPS's asm/kvm_host.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Invoke kvm_coalesced_mmio_init() from kvm_create_vm() now that allocating
and initializing coalesced MMIO objects is separate from registering any
associated devices.  Moving coalesced MMIO cleans up the last oddity
where KVM does VM creation/initialization after kvm_create_vm(), and more
importantly after kvm_arch_post_init_vm() is called and the VM is added
to the global vm_list, i.e. after the VM is fully created as far as KVM
is concerned.

Originally, kvm_coalesced_mmio_init() was called by kvm_create_vm(), but
the original implementation was completely devoid of error handling.
Commit 6ce5a090 ("KVM: coalesced_mmio: fix kvm_coalesced_mmio_init()'s
error handling" fixed the various bugs, and in doing so rightly moved the
call to after kvm_create_vm() because kvm_coalesced_mmio_init() also
registered the coalesced MMIO device.  Commit 2b3c246a ("KVM: Make
coalesced mmio use a device per zone") cleaned up that mess by having
each zone register a separate device, i.e. moved device registration to
its logical home in kvm_vm_ioctl_register_coalesced_mmio().  As a result,
kvm_coalesced_mmio_init() is now a "pure" initialization helper and can
be safely called from kvm_create_vm().

Opportunstically drop the #ifdef, KVM provides stubs for
kvm_coalesced_mmio_{init,free}() when CONFIG_KVM_MMIO=n (s390).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Unconditionally get a reference to the /dev/kvm module when creating a VM
instead of using try_get_module(), which will fail if the module is in
the process of being forcefully unloaded.  The error handling when
try_get_module() fails doesn't properly unwind all that has been done,
e.g. doesn't call kvm_arch_pre_destroy_vm() and doesn't remove the VM
from the global list.  Not removing VMs from the global list tends to be
fatal, e.g. leads to use-after-free explosions.

The obvious alternative would be to add proper unwinding, but the
justification for using try_get_module(), "rmmod --wait", is completely
bogus as support for "rmmod --wait", i.e. delete_module() without
O_NONBLOCK, was removed by commit 3f2b9c9c ("module: remove rmmod
--wait option.") nearly a decade ago.

It's still possible for try_get_module() to fail due to the module dying
(more like being killed), as the module will be tagged MODULE_STATE_GOING
by "rmmod --force", i.e. delete_module(..., O_TRUNC), but playing nice
with forced unloading is an exercise in futility and gives a falsea sense
of security.  Using try_get_module() only prevents acquiring _new_
references, it doesn't magically put the references held by other VMs,
and forced unloading doesn't wait, i.e. "rmmod --force" on KVM is all but
guaranteed to cause spectacular fireworks; the window where KVM will fail
try_get_module() is tiny compared to the window where KVM is building and
running the VM with an elevated module refcount.

Addressing KVM's inability to play nice with "rmmod --force" is firmly
out-of-scope.  Forcefully unloading any module taints kernel (for obvious
reasons)  _and_ requires the kernel to be built with
CONFIG_MODULE_FORCE_UNLOAD=y, which is off by default and comes with the
amusing disclaimer that it's "mainly for kernel developers and desperate
users".  In other words, KVM is free to scoff at bug reports due to using
"rmmod --force" while VMs may be running.

Fixes: 5f6de5cb ("KVM: Prevent module exit until all VMs are freed")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220816053937.2477106-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Properly unwind VM creation if kvm_create_vm_debugfs() fails.  A recent
change to invoke kvm_create_vm_debug() in kvm_create_vm() was led astray
by buggy try_get_module() handling adding by commit 5f6de5cb ("KVM:
Prevent module exit until all VMs are freed").  The debugfs error path
effectively inherits the bad error path of try_module_get(), e.g. KVM
leaves the to-be-free VM on vm_list even though KVM appears to do the
right thing by calling module_put() and falling through.

Opportunistically hoist kvm_create_vm_debugfs() above the call to
kvm_arch_post_init_vm() so that the "post-init" arch hook is actually
invoked after the VM is initialized (ignoring kvm_coalesced_mmio_init()
for the moment).  x86 is the only non-nop implementation of the post-init
hook, and it doesn't allocate/initialize any objects that are reachable
via debugfs code (spawns a kthread worker for the NX huge page mitigation).

Leave the buggy try_get_module() alone for now, it will be fixed in a
separate commit.

Fixes: b74ed7a6 ("KVM: Actually create debugfs in kvm_create_vm()")
Reported-by: syzbot+744e173caec2e1627ee0@syzkaller.appspotmail.com
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220816053937.2477106-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from netfilter.

  Current release - regressions:

   - tcp: fix cleanup and leaks in tcp_read_skb() (the new way BPF
     socket maps get data out of the TCP stack)

   - tls: rx: react to strparser initialization errors

   - netfilter: nf_tables: fix scheduling-while-atomic splat

   - net: fix suspicious RCU usage in bpf_sk_reuseport_detach()

  Current release - new code bugs:

   - mlxsw: ptp: fix a couple of races, static checker warnings and
     error handling

  Previous releases - regressions:

   - netfilter:
      - nf_tables: fix possible module reference underflow in error path
      - make conntrack helpers deal with BIG TCP (skbs > 64kB)
      - nfnetlink: re-enable conntrack expectation events

   - net: fix potential refcount leak in ndisc_router_discovery()

  Previous releases - always broken:

   - sched: cls_route: disallow handle of 0

   - neigh: fix possible local DoS due to net iface start/stop loop

   - rtnetlink: fix module refcount leak in rtnetlink_rcv_msg

   - sched: fix adding qlen to qcpu->backlog in gnet_stats_add_queue_cpu

   - virtio_net: fix endian-ness for RSS

   - dsa: mv88e6060: prevent crash on an unused port

   - fec: fix timer capture timing in `fec_ptp_enable_pps()`

   - ocelot: stats: fix races, integer wrapping and reading incorrect
     registers (the change of register definitions here accounts for
     bulk of the changed LoC in this PR)"

* tag 'net-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  net: moxa: MAC address reading, generating, validity checking
  tcp: handle pure FIN case correctly
  tcp: refactor tcp_read_skb() a bit
  tcp: fix tcp_cleanup_rbuf() for tcp_read_skb()
  tcp: fix sock skb accounting in tcp_read_skb()
  igb: Add lock to avoid data race
  dt-bindings: Fix incorrect "the the" corrections
  net: genl: fix error path memory leak in policy dumping
  stmmac: intel: Add a missing clk_disable_unprepare() call in intel_eth_pci_remove()
  net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
  net/mlx5e: Allocate flow steering storage during uplink initialization
  net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
  net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
  net: mscc: ocelot: make struct ocelot_stat_layout array indexable
  net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
  net: mscc: ocelot: turn stats_lock into a spinlock
  net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
  net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
  net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
  net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
  ...

Merge tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:

 - fix landlock test build regression

* tag 'linux-kselftest-next-6.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/landlock: fix broken include of linux/landlock.h

Pull rtla tool fixes from Steven Rostedt:
 "Fixes for the Real-Time Linux Analysis tooling:

   - Fix tracer name in comments and prints

   - Fix setting up symlinks

   - Allow extra flags to be set in build

   - Consolidate and show all necessary libraries not found in build
     error"

* tag 'trace-rtla-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  rtla: Consolidate and show all necessary libraries that failed for building
  tools/rtla: Build with EXTRA_{C,LD}FLAGS
  tools/rtla: Fix command symlinks
  rtla: Fix tracer name

Merge tag 'amd-drm-fixes-6.0-2022-08-17' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.0-2022-08-17:

amdgpu:
- Revert some DML stack changes
- Rounding fixes in KFD allocations
- atombios vram info table parsing fix
- DCN 3.1.4 fixes
- Clockgating fixes for various new IPs
- SMU 13.0.4 fixes
- DCN 3.1.4 FP fixes
- TMDS fixes for YCbCr420 4k modes
- DCN 3.2.x fixes
- USB 4 fixes
- SMU 13.0 fixes
- SMU driver unload memory leak fixes
- Display orientation fix
- Regression fix for generic fbdev conversion
- SDMA 6.x fixes
- SR-IOV fixes
- IH 6.x fixes
- Use after free fix in bo list handling
- Revert pipe1 support
- XGMI hive reset fix

amdkfd:
- Fix potential crach in kfd_create_indirect_link_prop()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220818025206.6463-1-alexander.deucher@amd.com

Fix the warning:
drivers/perf/riscv_pmu_legacy.c:76: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Fixes: 9b3e150e ("RISC-V: Add a simple platform driver for RISC-V legacy perf")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220812143532.1962623-1-conor.dooley@microchip.comSigned-off-by: Palmer Dabbelt <palmer@rivosinc.com>

This device does not remember its MAC address, so add a possibility
to get it from the platform. If it fails, generate a random address.
This will provide a MAC address early during boot without user space
being involved.

Also remove extra calls to is_valid_ether_addr().

Made after suggestions by Andrew Lunn:
1) Use eth_hw_addr_random() to assign a random MAC address during probe.
2) Remove is_valid_ether_addr() from moxart_mac_open()
3) Add a call to platform_get_ethdev_address() during probe
4) Remove is_valid_ether_addr() from moxart_set_mac_address(). The core does this

v1 -> v2:
Handle EPROBE_DEFER returned from platform_get_ethdev_address().
Move MAC reading code to the beginning of the probe function.
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
CC: Yang Yingliang <yangyingliang@huawei.com>
CC: Pavel Skripkin <paskripkin@gmail.com>
CC: Guobin Huang <huangguobin4@huawei.com>
CC: Yang Wei <yang.wei9@zte.com.cn>
CC: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220818092317.529557-1-saproj@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cong Wang says:

====================
tcp: some bug fixes for tcp_read_skb()

This patchset contains 3 bug fixes and 1 minor refactor patch for
tcp_read_skb(). V1 only had the first patch, as Eric prefers to fix all
of them together, I have to group them together.
====================

Link: https://lore.kernel.org/r/20220817195445.151609-1-xiyou.wangcong@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When skb->len==0, the recv_actor() returns 0 too, but we also use 0
for error conditions. This patch amends this by propagating the errors
to tcp_read_skb() so that we can distinguish skb->len==0 case from
error cases.

Fixes: 04919bed ("tcp: Introduce tcp_read_skb()")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As tcp_read_skb() only reads one skb at a time, the while loop is
unnecessary, we can turn it into an if. This also simplifies the
code logic.

Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

tcp_cleanup_rbuf() retrieves the skb from sk_receive_queue, it
assumes the skb is not yet dequeued. This is no longer true for
tcp_read_skb() case where we dequeue the skb first.

Fix this by introducing a helper __tcp_cleanup_rbuf() which does
not require any skb and calling it in tcp_read_skb().

Fixes: 04919bed ("tcp: Introduce tcp_read_skb()")
Cc: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>