Skip to content

L
linux
Switch branch/tag
  1. 17 Jun, 2022 2 commits
    • Eric Dumazet's avatar
      net: fix data-race in dev_isalive() · cc26c266
      Eric Dumazet authored 
      dev_isalive() is called under RTNL or dev_base_lock protection.

This means that changes to dev->reg_state should be done with both locks held.

syzbot reported:

BUG: KCSAN: data-race in register_netdevice / type_show

write to 0xffff888144ecf518 of 1 bytes by task 20886 on cpu 0:
register_netdevice+0xb9f/0xdf0 net/core/dev.c:10050
lapbeth_new_device drivers/net/wan/lapbether.c:414 [inline]
lapbeth_device_event+0x4a0/0x6c0 drivers/net/wan/lapbether.c:456
notifier_call_chain kernel/notifier.c:87 [inline]
raw_notifier_call_chain+0x53/0xb0 kernel/notifier.c:455
__dev_notify_flags+0x1d6/0x3a0
dev_change_flags+0xa2/0xc0 net/core/dev.c:8607
do_setlink+0x778/0x2230 net/core/rtnetlink.c:2780
__rtnl_newlink net/core/rtnetlink.c:3546 [inline]
rtnl_newlink+0x114c/0x16a0 net/core/rtnetlink.c:3593
rtnetlink_rcv_msg+0x811/0x8c0 net/core/rtnetlink.c:6089
netlink_rcv_skb+0x13e/0x240 net/netlink/af_netlink.c:2501
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6107
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x58a/0x660 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x661/0x750 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
__sys_sendto+0x21e/0x2c0 net/socket.c:2119
__do_sys_sendto net/socket.c:2131 [inline]
__se_sys_sendto net/socket.c:2127 [inline]
__x64_sys_sendto+0x74/0x90 net/socket.c:2127
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

read to 0xffff888144ecf518 of 1 bytes by task 20423 on cpu 1:
dev_isalive net/core/net-sysfs.c:38 [inline]
netdev_show net/core/net-sysfs.c:50 [inline]
type_show+0x24/0x90 net/core/net-sysfs.c:112
dev_attr_show+0x35/0x90 drivers/base/core.c:2095
sysfs_kf_seq_show+0x175/0x240 fs/sysfs/file.c:59
kernfs_seq_show+0x75/0x80 fs/kernfs/file.c:162
seq_read_iter+0x2c3/0x8e0 fs/seq_file.c:230
kernfs_fop_read_iter+0xd1/0x2f0 fs/kernfs/file.c:235
call_read_iter include/linux/fs.h:2052 [inline]
new_sync_read fs/read_write.c:401 [inline]
vfs_read+0x5a5/0x6a0 fs/read_write.c:482
ksys_read+0xe8/0x1a0 fs/read_write.c:620
__do_sys_read fs/read_write.c:630 [inline]
__se_sys_read fs/read_write.c:628 [inline]
__x64_sys_read+0x3e/0x50 fs/read_write.c:628
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

value changed: 0x00 -> 0x01

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 20423 Comm: udevd Tainted: G W 5.19.0-rc2-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarsyzbot <syzkaller@googlegroups.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cc26c266
    • Claudiu Manoil's avatar
      phy: aquantia: Fix AN when higher speeds than 1G are not advertised · 9b7fd167
      Claudiu Manoil authored 
      Even when the eth port is resticted to work with speeds not higher than 1G,
and so the eth driver is requesting the phy (via phylink) to advertise up
to 1000BASET support, the aquantia phy device is still advertising for 2.5G
and 5G speeds.
Clear these advertising defaults when requested.

Cc: Ondrej Spacek <ondrej.spacek@nxp.com>
Fixes: 09c4c57f ("net: phy: aquantia: add support for auto-negotiation configuration")
Signed-off-by: default avatarClaudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220610084037.7625-1-claudiu.manoil@nxp.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9b7fd167
  3. 16 Jun, 2022 3 commits
  5. 15 Jun, 2022 11 commits
  7. 14 Jun, 2022 11 commits
    • Linus Torvalds's avatar
      netfs: fix up netfs_inode_init() docbook comment · 018ab4fa
      Linus Torvalds authored 
      Commit e81fb419 ("netfs: Further cleanups after struct netfs_inode
wrapper introduced") changed the argument types and names, and actually
updated the comment too (although that was thanks to David Howells, not
me: my original patch only changed the code).

But the comment fixup didn't go quite far enough, and didn't change the
argument name in the comment, resulting in

  include/linux/netfs.h:314: warning: Function parameter or member 'ctx' not described in 'netfs_inode_init'
  include/linux/netfs.h:314: warning: Excess function parameter 'inode' description in 'netfs_inode_init'

during htmldoc generation.

Fixes: e81fb419 ("netfs: Further cleanups after struct netfs_inode wrapper introduced")
Reported-by: default avatarStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      018ab4fa
    • Przemyslaw Patynowski's avatar
      ice: Fix memory corruption in VF driver · efe41860
      Przemyslaw Patynowski authored 
      Disable VF's RX/TX queues, when it's disabled. VF can have queues enabled,
when it requests a reset. If PF driver assumes that VF is disabled,
while VF still has queues configured, VF may unmap DMA resources.
In such scenario device still can map packets to memory, which ends up
silently corrupting it.
Previously, VF driver could experience memory corruption, which lead to
crash:
[ 5119.170157] BUG: unable to handle kernel paging request at 00001b9780003237
[ 5119.170166] PGD 0 P4D 0
[ 5119.170173] Oops: 0002 [#1] PREEMPT_RT SMP PTI
[ 5119.170181] CPU: 30 PID: 427592 Comm: kworker/u96:2 Kdump: loaded Tainted: G        W I      --------- -  - 4.18.0-372.9.1.rt7.166.el8.x86_64 #1
[ 5119.170189] Hardware name: Dell Inc. PowerEdge R740/014X06, BIOS 2.3.10 08/15/2019
[ 5119.170193] Workqueue: iavf iavf_adminq_task [iavf]
[ 5119.170219] RIP: 0010:__page_frag_cache_drain+0x5/0x30
[ 5119.170238] Code: 0f 0f b6 77 51 85 f6 74 07 31 d2 e9 05 df ff ff e9 90 fe ff ff 48 8b 05 49 db 33 01 eb b4 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <f0> 29 77 34 74 01 c3 48 8b 07 f6 c4 80 74 0f 0f b6 77 51 85 f6 74
[ 5119.170244] RSP: 0018:ffffa43b0bdcfd78 EFLAGS: 00010282
[ 5119.170250] RAX: ffffffff896b3e40 RBX: ffff8fb282524000 RCX: 0000000000000002
[ 5119.170254] RDX: 0000000049000000 RSI: 0000000000000000 RDI: 00001b9780003203
[ 5119.170259] RBP: ffff8fb248217b00 R08: 0000000000000022 R09: 0000000000000009
[ 5119.170262] R10: 2b849d6300000000 R11: 0000000000000020 R12: 0000000000000000
[ 5119.170265] R13: 0000000000001000 R14: 0000000000000009 R15: 0000000000000000
[ 5119.170269] FS:  0000000000000000(0000) GS:ffff8fb1201c0000(0000) knlGS:0000000000000000
[ 5119.170274] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5119.170279] CR2: 00001b9780003237 CR3: 00000008f3e1a003 CR4: 00000000007726e0
[ 5119.170283] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5119.170286] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5119.170290] PKRU: 55555554
[ 5119.170292] Call Trace:
[ 5119.170298]  iavf_clean_rx_ring+0xad/0x110 [iavf]
[ 5119.170324]  iavf_free_rx_resources+0xe/0x50 [iavf]
[ 5119.170342]  iavf_free_all_rx_resources.part.51+0x30/0x40 [iavf]
[ 5119.170358]  iavf_virtchnl_completion+0xd8a/0x15b0 [iavf]
[ 5119.170377]  ? iavf_clean_arq_element+0x210/0x280 [iavf]
[ 5119.170397]  iavf_adminq_task+0x126/0x2e0 [iavf]
[ 5119.170416]  process_one_work+0x18f/0x420
[ 5119.170429]  worker_thread+0x30/0x370
[ 5119.170437]  ? process_one_work+0x420/0x420
[ 5119.170445]  kthread+0x151/0x170
[ 5119.170452]  ? set_kthread_struct+0x40/0x40
[ 5119.170460]  ret_from_fork+0x35/0x40
[ 5119.170477] Modules linked in: iavf sctp ip6_udp_tunnel udp_tunnel mlx4_en mlx4_core nfp tls vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM ipt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_counter nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support dell_smbios wmi_bmof dell_wmi_descriptor dcdbas kvm_intel kvm irqbypass intel_rapl_common isst_if_common skx_edac irdma nfit libnvdimm x86_pkg_temp_thermal i40e intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ib_uverbs rapl ipmi_ssif intel_cstate intel_uncore mei_me pcspkr acpi_ipmi ib_core mei lpc_ich i2c_i801 ipmi_si ipmi_devintf wmi ipmi_msghandler acpi_power_meter xfs libcrc32c sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ice ahci drm libahci crc32c_intel libata tg3 megaraid_sas
[ 5119.170613]  i2c_algo_bit dm_mirror dm_region_hash dm_log dm_mod fuse [last unloaded: iavf]
[ 5119.170627] CR2: 00001b9780003237

Fixes: ec4f5a43 ("ice: Check if VF is disabled for Opcode and other operations")
Signed-off-by: default avatarPrzemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Co-developed-by: default avatarSlawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: default avatarSlawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: default avatarMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      efe41860
    • Przemyslaw Patynowski's avatar
      ice: Fix queue config fail handling · be2af714
      Przemyslaw Patynowski authored 
      Disable VF's RX/TX queues, when VIRTCHNL_OP_CONFIG_VSI_QUEUES fail.
Not disabling them might lead to scenario, where PF driver leaves VF
queues enabled, when VF's VSI failed queue config.
In this scenario VF should not have RX/TX queues enabled. If PF failed
to set up VF's queues, VF will reset due to TX timeouts in VF driver.
Initialize iterator 'i' to -1, so if error happens prior to configuring
queues then error path code will not disable queue 0. Loop that
configures queues will is using same iterator, so error path code will
only disable queues that were configured.

Fixes: 77ca27c4 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Suggested-by: default avatarSlawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: default avatarPrzemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: default avatarMateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: default avatarKonrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      be2af714
    • Roman Storozhenko's avatar
      ice: Sync VLAN filtering features for DVM · 9542ef4f
      Roman Storozhenko authored 
      VLAN filtering features, that is C-Tag and S-Tag, in DVM mode must be
both enabled or disabled.
In case of turning off/on only one of the features, another feature must
be turned off/on automatically with issuing an appropriate message to
the kernel log.

Fixes: 1babaf77 ("ice: Advertise 802.1ad VLAN filtering and offloads for PF netdev")
Signed-off-by: default avatarRoman Storozhenko <roman.storozhenko@intel.com>
Co-developed-by: default avatarAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Signed-off-by: default avatarAnatolii Gerasymenko <anatolii.gerasymenko@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      9542ef4f
    • Michal Michalik's avatar
      ice: Fix PTP TX timestamp offset calculation · 71a579f0
      Michal Michalik authored 
      The offset was being incorrectly calculated for E822 - that led to
collisions in choosing TX timestamp register location when more than
one port was trying to use timestamping mechanism.

In E822 one quad is being logically split between ports, so quad 0 is
having trackers for ports 0-3, quad 1 ports 4-7 etc. Each port should
have separate memory location for tracking timestamps. Due to error for
example ports 1 and 2 had been assigned to quad 0 with same offset (0),
while port 1 should have offset 0 and 1 offset 16.

Fix it by correctly calculating quad offset.

Fixes: 3a749623 ("ice: implement basic E822 PTP support")
Signed-off-by: default avatarMichal Michalik <michal.michalik@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: default avatarTony Nguyen <anthony.l.nguyen@intel.com>
      71a579f0
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 24625f7d
      Linus Torvalds authored 
      Pull kvm fixes from Paolo Bonzini:
 "While last week's pull request contained miscellaneous fixes for x86,
  this one covers other architectures, selftests changes, and a bigger
  series for APIC virtualization bugs that were discovered during 5.20
  development. The idea is to base 5.20 development for KVM on top of
  this tag.

  ARM64:

   - Properly reset the SVE/SME flags on vcpu load

   - Fix a vgic-v2 regression regarding accessing the pending state of a
     HW interrupt from userspace (and make the code common with vgic-v3)

   - Fix access to the idreg range for protected guests

   - Ignore 'kvm-arm.mode=protected' when using VHE

   - Return an error from kvm_arch_init_vm() on allocation failure

   - A bunch of small cleanups (comments, annotations, indentation)

  RISC-V:

   - Typo fix in arch/riscv/kvm/vmid.c

   - Remove broken reference pattern from MAINTAINERS entry

  x86-64:

   - Fix error in page tables with MKTME enabled

   - Dirty page tracking performance test extended to running a nested
     guest

   - Disable APICv/AVIC in cases that it cannot implement correctly"

[ This merge also fixes a misplaced end parenthesis bug introduced in
  commit 3743c2f0 ("KVM: x86: inhibit APICv/AVIC on changes to APIC
  ID or APIC base") pointed out by Sean Christopherson ]

Link: https://lore.kernel.org/all/20220610191813.371682-1-seanjc@google.com/

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
  KVM: selftests: Restrict test region to 48-bit physical addresses when using nested
  KVM: selftests: Add option to run dirty_log_perf_test vCPUs in L2
  KVM: selftests: Clean up LIBKVM files in Makefile
  KVM: selftests: Link selftests directly with lib object files
  KVM: selftests: Drop unnecessary rule for STATIC_LIBS
  KVM: selftests: Add a helper to check EPT/VPID capabilities
  KVM: selftests: Move VMX_EPT_VPID_CAP_AD_BITS to vmx.h
  KVM: selftests: Refactor nested_map() to specify target level
  KVM: selftests: Drop stale function parameter comment for nested_map()
  KVM: selftests: Add option to create 2M and 1G EPT mappings
  KVM: selftests: Replace x86_page_size with PG_LEVEL_XX
  KVM: x86: SVM: fix nested PAUSE filtering when L0 intercepts PAUSE
  KVM: x86: SVM: drop preempt-safe wrappers for avic_vcpu_load/put
  KVM: x86: disable preemption around the call to kvm_arch_vcpu_{un|}blocking
  KVM: x86: disable preemption while updating apicv inhibition
  KVM: x86: SVM: fix avic_kick_target_vcpus_fast
  KVM: x86: SVM: remove avic's broken code that updated APIC ID
  KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base
  KVM: x86: document AVIC/APICv inhibit reasons
  KVM: x86/mmu: Set memory encryption "value", not "mask", in shadow PDPTRs
  ...
      24625f7d
    • Linus Torvalds's avatar
      Merge tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 8e8afafb
      Linus Torvalds authored 
      Pull x86 MMIO stale data fixes from Thomas Gleixner:
 "Yet another hw vulnerability with a software mitigation: Processor
  MMIO Stale Data.

  They are a class of MMIO-related weaknesses which can expose stale
  data by propagating it into core fill buffers. Data which can then be
  leaked using the usual speculative execution methods.

  Mitigations include this set along with microcode updates and are
  similar to MDS and TAA vulnerabilities: VERW now clears those buffers
  too"

* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/speculation/mmio: Print SMT warning
  KVM: x86/speculation: Disable Fill buffer clear within guests
  x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
  x86/speculation/srbds: Update SRBDS mitigation selection
  x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
  x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
  x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
  x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
  x86/speculation: Add a common function for MD_CLEAR mitigation update
  x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
  Documentation: Add documentation for Processor MMIO Stale Data
      8e8afafb
    • Petr Machata's avatar
      mlxsw: spectrum_cnt: Reorder counter pools · 4b7a632a
      Petr Machata authored 
      Both RIF and ACL flow counters use a 24-bit SW-managed counter address to
communicate which counter they want to bind.

In a number of Spectrum FW releases, binding a RIF counter is broken and
slices the counter index to 16 bits. As a result, on Spectrum-2 and above,
no more than about 410 RIF counters can be effectively used. This
translates to 205 netdevices for which L3 HW stats can be enabled. (This
does not happen on Spectrum-1, because there are fewer counters available
overall and the counter index never exceeds 16 bits.)

Binding counters to ACLs does not have this issue. Therefore reorder the
counter allocation scheme so that RIF counters come first and therefore get
lower indices that are below the 16-bit barrier.

Fixes: 98e60dce ("Merge branch 'mlxsw-Introduce-initial-Spectrum-2-support'")
Reported-by: default avatarMaksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: default avatarPetr Machata <petrm@nvidia.com>
Signed-off-by: default avatarIdo Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220613125017.2018162-1-idosch@nvidia.comSigned-off-by: default avatarPaolo Abeni <pabeni@redhat.com>
      4b7a632a
    • Christian Brauner's avatar
      fs: account for group membership · 168f9128
      Christian Brauner authored 
      When calling setattr_prepare() to determine the validity of the
attributes the ia_{g,u}id fields contain the value that will be written
to inode->i_{g,u}id. This is exactly the same for idmapped and
non-idmapped mounts and allows callers to pass in the values they want
to see written to inode->i_{g,u}id.

When group ownership is changed a caller whose fsuid owns the inode can
change the group of the inode to any group they are a member of. When
searching through the caller's groups we need to use the gid mapped
according to the idmapped mount otherwise we will fail to change
ownership for unprivileged users.

Consider a caller running with fsuid and fsgid 1000 using an idmapped
mount that maps id 65534 to 1000 and 65535 to 1001. Consequently, a file
owned by 65534:65535 in the filesystem will be owned by 1000:1001 in the
idmapped mount.

The caller now requests the gid of the file to be changed to 1000 going
through the idmapped mount. In the vfs we will immediately map the
requested gid to the value that will need to be written to inode->i_gid
and place it in attr->ia_gid. Since this idmapped mount maps 65534 to
1000 we place 65534 in attr->ia_gid.

When we check whether the caller is allowed to change group ownership we
first validate that their fsuid matches the inode's uid. The
inode->i_uid is 65534 which is mapped to uid 1000 in the idmapped mount.
Since the caller's fsuid is 1000 we pass the check.

We now check whether the caller is allowed to change inode->i_gid to the
requested gid by calling in_group_p(). This will compare the passed in
gid to the caller's fsgid and search the caller's additional groups.

Since we're dealing with an idmapped mount we need to pass in the gid
mapped according to the idmapped mount. This is akin to checking whether
a caller is privileged over the future group the inode is owned by. And
that needs to take the idmapped mount into account. Note, all helpers
are nops without idmapped mounts.

New regression test sent to xfstests.

Link: https://github.com/lxc/lxd/issues/10537
Link: https://lore.kernel.org/r/20220613111517.2186646-1-brauner@kernel.org
Fixes: 2f221d6f ("attr: handle idmapped mounts")
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org # 5.15+
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: default avatarSeth Forshee <sforshee@digitalocean.com>
Signed-off-by: default avatarChristian Brauner (Microsoft) <brauner@kernel.org>
      168f9128
    • Jonathan Neuschäfer's avatar
      docs: networking: phy: Fix a typo · 9cc8ea99
      Jonathan Neuschäfer authored 
      Write "to be operated" instead of "to be operate".
Signed-off-by: default avatarJonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220610072809.352962-1-j.neuschaefer@gmx.netSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9cc8ea99
    • Jean-Philippe Brucker's avatar
      amd-xgbe: Use platform_irq_count() · 884c65e4
      Jean-Philippe Brucker authored 
      The AMD XGbE driver currently counts the number of interrupts assigned
to the device by inspecting the pdev->resource array. Since commit
a1a2b712 ("of/platform: Drop static setup of IRQ resource from DT
core") removed IRQs from this array, the driver now attempts to get all
interrupts from 1 to -1U and gives up probing once it reaches an invalid
interrupt index.

Obtain the number of IRQs with platform_irq_count() instead.

Fixes: a1a2b712 ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: default avatarJean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: default avatarRob Herring <robh@kernel.org>
Acked-by: default avatarTom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20220609161457.69614-1-jean-philippe@linaro.orgSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      884c65e4
  9. 13 Jun, 2022 13 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7