- 14 May, 2019 40 commits
-
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 5f074f3e ] A recent optimization in Clang (r355672) lowers comparisons of the return value of memcmp against zero to comparisons of the return value of bcmp against zero. This helps some platforms that implement bcmp more efficiently than memcmp. glibc simply aliases bcmp to memcmp, but an optimized implementation is in the works. This results in linkage failures for all targets with Clang due to the undefined symbol. For now, just implement bcmp as a tailcail to memcmp to unbreak the build. This routine can be further optimized in the future. Other ideas discussed: * A weak alias was discussed, but breaks for architectures that define their own implementations of memcmp since aliases to declarations are not permitted (only definitions). Arch-specific memcmp implementations typically declare memcmp in C headers, but implement them in assembly. * -ffreestanding also is used sporadically throughout the kernel. * -fno-builtin-bcmp doesn't work when doing LTO. Link: https://bugs.llvm.org/show_bug.cgi?id=41035 Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13 Link: https://github.com/ClangBuiltLinux/linux/issues/416 Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.comSigned-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reported-by:
Nathan Chancellor <natechancellor@gmail.com> Reported-by:
Adhemerval Zanella <adhemerval.zanella@linaro.org> Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
James Y Knight <jyknight@google.com> Suggested-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ac3e233d upstream. GNU linker's -z common-page-size's default value is based on the target architecture. arch/x86/entry/vdso/Makefile sets it to the architecture default, which is implicit and redundant. Drop it. Fixes: 2aae950b ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Reported-by:
Dmitry Golovin <dima@golovin.in> Reported-by:
Bill Wendling <morbo@google.com> Suggested-by:
Rui Ueyama <ruiu@google.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Fangrui Song <maskray@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=38774 Link: https://github.com/ClangBuiltLinux/linux/issues/31Signed-off-by:
-
Alistair Strachan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 379d98dd upstream. The vdso{32,64}.so can fail to link with CC=clang when clang tries to find a suitable GCC toolchain to link these libraries with. /usr/bin/ld: arch/x86/entry/vdso/vclock_gettime.o: access beyond end of merged section (782) This happens because the host environment leaked into the cross compiler environment due to the way clang searches for suitable GCC toolchains. Clang is a retargetable compiler, and each invocation of it must provide --target=<something> --gcc-toolchain=<something> to allow it to find the correct binutils for cross compilation. These flags had been added to KBUILD_CFLAGS, but the vdso code uses CC and not KBUILD_CFLAGS (for various reasons) which breaks clang's ability to find the correct linker when cross compiling. Most of the time this goes unnoticed because the host linker is new enough to work anyway, or is incompatible and skipped, but this cannot be reliably assumed. This change alters the vdso makefile to just use LD directly, which bypasses clang and thus the searching problem. The makefile will just use ${CROSS_COMPILE}ld instead, which is always what we want. This matches the method used to link vmlinux. This drops references to DISABLE_LTO; this option doesn't seem to be set anywhere, and not knowing what its possible values are, it's not clear how to convert it from CC to LD flag. Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
George Rimar authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 927185c1 upstream. The kernel uses the OUTPUT_FORMAT linker script command in it's linker scripts. Most of the time, the -m option is passed to the linker with correct architecture, but sometimes (at least for x86_64) the -m option contradicts the OUTPUT_FORMAT directive. Specifically, arch/x86/boot and arch/x86/realmode/rm produce i386 object files, but are linked with the -m elf_x86_64 linker flag when building for x86_64. The GNU linker manpage doesn't explicitly state any tie-breakers between -m and OUTPUT_FORMAT. But with BFD and Gold linkers, OUTPUT_FORMAT overrides the emulation value specified with the -m option. LLVM lld has a different behavior, however. When supplied with contradicting -m and OUTPUT_FORMAT values it fails with the following error message: ld.lld: error: arch/x86/realmode/rm/header.o is incompatible with elf_x86_64 Therefore, just add the correct -m after the incorrect one (it overrides it), so the linker invocation looks like this: ld -m elf_x86_64 -z max-page-size=0x200000 -m elf_i386 --emit-relocs -T \ realmode.lds header.o trampoline_64.o stack.o reboot.o -o realmode.elf This is not a functional change for GNU ld, because (although not explicitly documented) OUTPUT_FORMAT overrides -m EMULATION. Tested by building x86_64 kernel with GNU gcc/ld toolchain and booting it in QEMU. [ bp: massage and clarify text. ] Suggested-by:
George Rimar <grimar@accesssoftek.com> Signed-off-by:
Tri Vo <trong@android.com> Signed-off-by:
-
Nick Desaulniers authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit ad15006c upstream. This causes an issue when trying to build with `make LD=ld.lld` if ld.lld and the rest of your cross tools aren't in the same directory (ex. /usr/local/bin) (as is the case for Android's build system), as the GCC_TOOLCHAIN_DIR then gets set based on `which $(LD)` which will point where LLVM tools are, not GCC/binutils tools are located. Instead, select the GCC_TOOLCHAIN_DIR based on another tool provided by binutils for which LLVM does not provide a substitute for, such as elfedit. Fixes: 785f11aa ("kbuild: Add better clang cross build support") Link: https://github.com/ClangBuiltLinux/linux/issues/341Suggested-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1828420 commit 9f834ec1 upstream. We used to delay switching to the new credentials until after we had mapped the executable (and possible elf interpreter). That was kind of odd to begin with, since the new executable will actually then _run_ with the new creds, but whatever. The bigger problem was that we also want to make sure that we turn off prof events and tracing before we start mapping the new executable state. So while this is a cleanup, it's also a fix for a possible information leak. Reported-by:
Robert Święcki <robert@swiecki.net> Tested-by:
Peter Zijlstra <peterz@infradead.org> Acked-by:
David Howells <dhowells@redhat.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Andy Lutomirski <luto@amacapital.net> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Ville Syrjälä authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit c978ae9b ] We aren't supposed to force a stop+start between every i2c msg when performing multi message transfers. This should eg. cause the DDC segment address to be reset back to 0 between writing the segment address and reading the actual EDID extension block. To quote the E-DDC spec: "... this standard requires that the segment pointer be reset to 00h when a NO ACK or a STOP condition is received." Since we're going to touch this might as well consult the I2C_M_STOP flag to determine whether we want to force the stop or not. Cc: Brian Vincent <brainn@gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=108081Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928180403.22499-1-ville.syrjala@linux.intel.comReviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Ben Dooks authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit e486df39 ] The dma_desc->bytes_transferred counter tracks the number of bytes moved by the DMA channel. This is then used to calculate the information passed back in the in the tegra_dma_tx_status callback, which is usually fine. When the DMA channel is configured as continous, then the bytes_transferred counter will increase over time and eventually overflow to become negative so the residue count will become invalid and the ALSA sound-dma code will report invalid hardware pointer values to the application. This results in some users becoming confused about the playout position and putting audio data in the wrong place. To fix this issue, always ensure the bytes_transferred field is modulo the size of the request. We only do this for the case of the cyclic transfer done ISR as anyone attempting to move 2GiB of DMA data in one transfer is unlikely. Note, we don't fix the issue that we should /never/ transfer a negative number of bytes so we could make those fields unsigned. Reviewed-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Rafael Ávila de Espíndola authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d071ae09 ] Accessing per-CPU variables is done by finding the offset of the variable in the per-CPU block and adding it to the address of the respective CPU's block. Section 3.10.8 of ld.bfd's documentation states: For expressions involving numbers, relative addresses and absolute addresses, ld follows these rules to evaluate terms: Other binary operations, that is, between two relative addresses not in the same section, or between a relative address and an absolute address, first convert any non-absolute term to an absolute address before applying the operator." Note that LLVM's linker does not adhere to the GNU ld's implementation and as such requires implicitly-absolute terms to be explicitly marked as absolute in the linker script. If not, it fails currently with: ld.lld: error: ./arch/x86/kernel/vmlinux.lds:153: at least one side of the expression must be absolute ld.lld: error: ./arch/x86/kernel/vmlinux.lds:154: at least one side of the expression must be absolute Makefile:1040: recipe for target 'vmlinux' failed This is not a functional change for ld.bfd which converts the term to an absolute symbol anyways as specified above. Based on a previous submission by Tri Vo <trong@android.com>. Reported-by:
Rafael Ávila de Espíndola <rafael@espindo.la> [ Update commit message per Boris' and Michael's suggestions. ] Signed-off-by:
-
Zumeng Chen authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit ba2ffc96 ] Release fw_status, raw_fw_status, and tx_res_if when wl12xx_fetch_firmware failed instead of meaningless goto out to avoid the following memory leak reports(Only the last one listed): unreferenced object 0xc28a9a00 (size 512): comm "kworker/0:4", pid 31298, jiffies 2783204 (age 203.290s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<6624adab>] kmemleak_alloc+0x40/0x74 [<500ddb31>] kmem_cache_alloc_trace+0x1ac/0x270 [<db4d731d>] wl12xx_chip_wakeup+0xc4/0x1fc [wlcore] [<76c5db53>] wl1271_op_add_interface+0x4a4/0x8f4 [wlcore] [<cbf30777>] drv_add_interface+0xa4/0x1a0 [mac80211] [<65bac325>] ieee80211_reconfig+0x9c0/0x1644 [mac80211] [<2817c80e>] ieee80211_restart_work+0x90/0xc8 [mac80211] [<7e1d425a>] process_one_work+0x284/0x42c [<55f9432e>] worker_thread+0x2fc/0x48c [<abb582c6>] kthread+0x148/0x160 [<63144b13>] ret_from_fork+0x14/0x2c [< (null)>] (null) [<1f6e7715>] 0xffffffff Signed-off-by:
Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Axel Lin authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit f01a7beb ] The act8600_sudcdc_voltage_ranges setting does not match the datasheet. The problems in below entry: REGULATOR_LINEAR_RANGE(19000000, 191, 255, 400000), 1. The off-by-one min_sel causes wrong volatage calculation. The min_sel should be 192. 2. According to the datasheet[1] Table 7. (on page 43): The selector 248 (0b11111000) ~ 255 (0b11111111) are 41.400V. Also fix off-by-one for ACT8600_SUDCDC_VOLTAGE_NUM. [1] https://active-semi.com/wp-content/uploads/ACT8600_Datasheet.pdf Fixes: df3a950e ("regulator: act8865: Add act8600 support") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Pawe? Chmiel authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 49710c32 ] Previously when doing format enumeration, it was returning all formats supported by driver, even if they're not supported by hw. Add missing check for fmt_ver_flag, so it'll be fixed and only those supported by hw will be returned. Similar thing is already done in s5p_jpeg_find_format. It was found by using v4l2-compliance tool and checking result of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test and using v4l2-ctl to get list of all supported formats. Tested on s5pv210-galaxys (Samsung i9000 phone). Fixes: bb677f3a ("[media] Exynos4 JPEG codec v4l2 driver") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> [hverkuil-cisco@xs4all.nl: fix a few alignment issues] Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Florian Westphal authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 8e2f311a ] Following command: iptables -D FORWARD -m physdev ... causes connectivity loss in some setups. Reason is that iptables userspace will probe kernel for the module revision of the physdev patch, and physdev has an artificial dependency on br_netfilter (xt_physdev use makes no sense unless a br_netfilter module is loaded). This causes the "phydev" module to be loaded, which in turn enables the "call-iptables" infrastructure. bridged packets might then get dropped by the iptables ruleset. The better fix would be to change the "call-iptables" defaults to 0 and enforce explicit setting to 1, but that breaks backwards compatibility. This does the next best thing: add a request_module call to checkentry. This was a stray '-D ... -m physdev' won't activate br_netfilter anymore. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Anders Roxell authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 9227ab56 ] The warning got introduced by commit 930507c1 ("arm64: add basic Kconfig symbols for i.MX8"). Since it got enabled for arm64. The warning haven't been seen before since size_t was 'unsigned int' when built on arm32. ../drivers/dma/imx-dma.c: In function ‘imxdma_sg_next’: ../include/linux/kernel.h:846:29: warning: comparison of distinct pointer types lacks a cast (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1))) ^~ ../include/linux/kernel.h:860:4: note: in expansion of macro ‘__typecheck’ (__typecheck(x, y) && __no_side_effects(x, y)) ^~~~~~~~~~~ ../include/linux/kernel.h:870:24: note: in expansion of macro ‘__safe_cmp’ __builtin_choose_expr(__safe_cmp(x, y), \ ^~~~~~~~~~ ../include/linux/kernel.h:879:19: note: in expansion of macro ‘__careful_cmp’ #define min(x, y) __careful_cmp(x, y, <) ^~~~~~~~~~~~~ ../drivers/dma/imx-dma.c:288:8: note: in expansion of macro ‘min’ now = min(d->len, sg_dma_len(sg)); ^~~ Rework so that we use min_t and pass in the size_t that returns the minimum of two values, using the specified type. Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Acked-by:
Olof Johansson <olof@lixom.net> Reviewed-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Buland Singh authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 24d48a61 ] Commit '3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes")' introduced a new kernel command line parameter hpet_mmap, that is required to expose the memory map of the HPET registers to user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is broken and never takes effect due to missing '=' character in the __setup() code of hpet_mmap_enable. Before this patch: dmesg output with the kernel command line parameter hpet_mmap=1 [ 0.204152] HPET mmap disabled dmesg output with the kernel command line parameter hpet_mmap=0 [ 0.204192] HPET mmap disabled After this patch: dmesg output with the kernel command line parameter hpet_mmap=1 [ 0.203945] HPET mmap enabled dmesg output with the kernel command line parameter hpet_mmap=0 [ 0.204652] HPET mmap disabled Fixes: 3d035f58 ("drivers/char/hpet.c: allow user controlled mmap for user processes") Signed-off-by:
Buland Singh <bsingh@redhat.com> Signed-off-by:
-
Timo Alho authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 51294bf6 ] On cases where device tree entries for fuse and clock provider are in different order, fuse driver needs to defer probing. This leads to freeing incorrect IO base address as the fuse->base variable gets overwritten once during first probe invocation. This leads to the following spew during boot: [ 3.082285] Trying to vfree() nonexistent vm area (00000000cfe8fd94) [ 3.082308] WARNING: CPU: 5 PID: 126 at /hdd/l4t/kernel/stable/mm/vmalloc.c:1511 __vunmap+0xcc/0xd8 [ 3.082318] Modules linked in: [ 3.082330] CPU: 5 PID: 126 Comm: kworker/5:1 Tainted: G S 4.19.7-tegra-gce119d3 #1 [ 3.082340] Hardware name: quill (DT) [ 3.082353] Workqueue: events deferred_probe_work_func [ 3.082364] pstate: 40000005 (nZcv daif -PAN -UAO) [ 3.082372] pc : __vunmap+0xcc/0xd8 [ 3.082379] lr : __vunmap+0xcc/0xd8 [ 3.082385] sp : ffff00000a1d3b60 [ 3.082391] x29: ffff00000a1d3b60 x28: 0000000000000000 [ 3.082402] x27: 0000000000000000 x26: ffff000008e8b610 [ 3.082413] x25: 0000000000000000 x24: 0000000000000009 [ 3.082423] x23: ffff000009221a90 x22: ffff000009f6d000 [ 3.082432] x21: 0000000000000000 x20: 0000000000000000 [ 3.082442] x19: ffff000009f6d000 x18: ffffffffffffffff [ 3.082452] x17: 0000000000000000 x16: 0000000000000000 [ 3.082462] x15: ffff0000091396c8 x14: 0720072007200720 [ 3.082471] x13: 0720072007200720 x12: 0720072907340739 [ 3.082481] x11: 0764076607380765 x10: 0766076307300730 [ 3.082491] x9 : 0730073007300730 x8 : 0730073007280720 [ 3.082501] x7 : 0761076507720761 x6 : 0000000000000102 [ 3.082510] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.082519] x3 : ffffffffffffffff x2 : ffff000009150ff8 [ 3.082528] x1 : 3d95b1429fff5200 x0 : 0000000000000000 [ 3.082538] Call trace: [ 3.082545] __vunmap+0xcc/0xd8 [ 3.082552] vunmap+0x24/0x30 [ 3.082561] __iounmap+0x2c/0x38 [ 3.082569] tegra_fuse_probe+0xc8/0x118 [ 3.082577] platform_drv_probe+0x50/0xa0 [ 3.082585] really_probe+0x1b0/0x288 [ 3.082593] driver_probe_device+0x58/0x100 [ 3.082601] __device_attach_driver+0x98/0xf0 [ 3.082609] bus_for_each_drv+0x64/0xc8 [ 3.082616] __device_attach+0xd8/0x130 [ 3.082624] device_initial_probe+0x10/0x18 [ 3.082631] bus_probe_device+0x90/0x98 [ 3.082638] deferred_probe_work_func+0x74/0xb0 [ 3.082649] process_one_work+0x1e0/0x318 [ 3.082656] worker_thread+0x228/0x450 [ 3.082664] kthread+0x128/0x130 [ 3.082672] ret_from_fork+0x10/0x18 [ 3.082678] ---[ end trace 0810fe6ba772c1c7 ]--- Fix this by retaining the value of fuse->base until driver has successfully probed. Signed-off-by:
Timo Alho <talho@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
David Tolnay authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit aef027db ] The virtio-rng driver uses a completion called have_data to wait for a virtio read to be fulfilled by the hypervisor. The completion is reset before placing a buffer on the virtio queue and completed by the virtio callback once data has been written into the buffer. Prior to this commit, the driver called init_completion on this completion both during probe as well as when registering virtio buffers as part of a hwrng read operation. The second of these init_completion calls should instead be reinit_completion because the have_data completion has already been inited by probe. As described in Documentation/scheduler/completion.txt, "Calling init_completion() twice on the same completion object is most likely a bug". This bug was present in the initial implementation of virtio-rng in f7f510ec ("virtio: An entropy device, as suggested by hpa"). Back then the have_data completion was a single static completion rather than a member of one of potentially multiple virtrng_info structs as implemented later by 08e53fbd ("virtio-rng: support multiple virtio-rng devices"). The original driver incorrectly used init_completion rather than INIT_COMPLETION to reset have_data during read. Tested by running `head -c48 /dev/random | hexdump` within crosvm, the Chrome OS virtual machine monitor, and confirming that the virtio-rng driver successfully produces random bytes from the host. Signed-off-by:
David Tolnay <dtolnay@gmail.com> Tested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Akinobu Mita authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 29856308 ] This driver sets initial frame width and height to 0x0, which is invalid. So set it to selection rectangle bounds instead. This is detected by v4l2-compliance detected. Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Manfred Schlaegl authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 7ab57b76 ] We increase the default limit for buffer memory allocation by a factor of 10 to 640K to prevent data loss when using fast serial interfaces. For example when using RS485 without flow-control at speeds of 1Mbit/s an upwards we've run into problems such as applications being too slow to read out this buffer (on embedded devices based on imx53 or imx6). If you want to write transmitted data to a slow SD card and thus have realtime requirements, this limit can become a problem. That shouldn't be the case and 640K buffers fix such problems for us. This value is a maximum limit for allocation only. It has no effect on systems that currently run fine. When transmission is slow enough applications and hardware can keep up and increasing this limit doesn't change anything. It only _allows_ to allocate more than 2*64K in cases we currently fail to allocate memory despite having some. Signed-off-by:
Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by:
Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by:
-
Russell King authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 5388a5b8 ] machine_crash_nonpanic_core() does this: while (1) cpu_relax(); because the kernel has crashed, and we have no known safe way to deal with the CPU. So, we place the CPU into an infinite loop which we expect it to never exit - at least not until the system as a whole is reset by some method. In the absence of erratum 754327, this code assembles to: b . In other words, an infinite loop. When erratum 754327 is enabled, this becomes: 1: dmb b 1b It has been observed that on some systems (eg, OMAP4) where, if a crash is triggered, the system tries to kexec into the panic kernel, but fails after taking the secondary CPU down - placing it into one of these loops. This causes the system to livelock, and the most noticable effect is the system stops after issuing: Loading crashdump kernel... to the system console. The tested as working solution I came up with was to add wfe() to these infinite loops thusly: while (1) { cpu_relax(); wfe(); } which, without 754327 builds to: 1: wfe b 1b or with 754327 is enabled: 1: dmb wfe b 1b Adding "wfe" does two things depending on the environment we're running under: - where we're running on bare metal, and the processor implements "wfe", it stops us spinning endlessly in a loop where we're never going to do any useful work. - if we're running in a VM, it allows the CPU to be given back to the hypervisor and rescheduled for other purposes (maybe a different VM) rather than wasting CPU cycles inside a crashed VM. However, in light of erratum 794072, Will Deacon wanted to see 10 nops as well - which is reasonable to cover the case where we have erratum 754327 enabled _and_ we have a processor that doesn't implement the wfe hint. So, we now end up with: 1: wfe b 1b when erratum 754327 is disabled, or: 1: dmb nop nop nop nop nop nop nop nop nop nop wfe b 1b when erratum 754327 is enabled. We also get the dmb + 10 nop sequence elsewhere in the kernel, in terminating loops. This is reasonable - it means we get the workaround for erratum 794072 when erratum 754327 is enabled, but still relinquish the dead processor - either by placing it in a lower power mode when wfe is implemented as such or by returning it to the hypervisior, or in the case where wfe is a no-op, we use the workaround specified in erratum 794072 to avoid the problem. These as two entirely orthogonal problems - the 10 nops addresses erratum 794072, and the wfe is an optimisation that makes the system more efficient when crashed either in terms of power consumption or by allowing the host/other VMs to make use of the CPU. I don't see any reason not to use kexec() inside a VM - it has the potential to provide automated recovery from a failure of the VMs kernel with the opportunity for saving a crashdump of the failure. A panic() with a reboot timeout won't do that, and reading the libvirt documentation, setting on_reboot to "preserve" won't either (the documentation states "The preserve action for an on_reboot event is treated as a destroy".) Surely it has to be a good thing to avoiding having CPUs spinning inside a VM that is doing no useful work. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Stanislaw Gruszka authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 3bd1505f ] As reported by Michael eeprom 0d is supported and work with the driver. Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param with 0d EEPORM looks like this: RSSI offset: 0 0 Reference temp: f9 LNA gain: 8 Reg channels: 1-14 Per rate power: raw:05 bw20:05 bw40:05 raw:05 bw20:05 bw40:05 raw:03 bw20:03 bw40:03 raw:03 bw20:03 bw40:03 raw:04 bw20:04 bw40:04 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:02 bw20:02 bw40:02 raw:00 bw20:00 bw40:00 Per channel power: tx_power ch1:09 ch2:09 tx_power ch3:0a ch4:0a tx_power ch5:0a ch6:0a tx_power ch7:0b ch8:0b tx_power ch9:0b ch10:0b tx_power ch11:0b ch12:0b tx_power ch13:0b ch14:0b Reported-and-tested-by:
Michael <ZeroBeat@gmx.de> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Alexey Khoroshilov authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 8cd09a3d ] If of_platform_populate() fails in gsbi_probe(), gsbi->hclk is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Andy Gross <andy.gross@linaro.org> Signed-off-by:
-
wen yang authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 11907e9d ] The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by:
Wen Yang <yellowriver2010@hotmil.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit f25191bb ] The following traceback is sometimes seen when booting an image in qemu: [ 54.608293] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 54.611085] Fusion MPT base driver 3.04.20 [ 54.611877] Copyright (c) 1999-2008 LSI Corporation [ 54.616234] Fusion MPT SAS Host driver 3.04.20 [ 54.635139] sysctl duplicate entry: /dev/cdrom//info [ 54.639578] CPU: 0 PID: 266 Comm: kworker/u4:5 Not tainted 5.0.0-rc5 #1 [ 54.639578] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 54.641273] Workqueue: events_unbound async_run_entry_fn [ 54.641273] Call Trace: [ 54.641273] dump_stack+0x67/0x90 [ 54.641273] __register_sysctl_table+0x50b/0x570 [ 54.641273] ? rcu_read_lock_sched_held+0x6f/0x80 [ 54.641273] ? kmem_cache_alloc_trace+0x1c7/0x1f0 [ 54.646814] __register_sysctl_paths+0x1c8/0x1f0 [ 54.646814] cdrom_sysctl_register.part.7+0xc/0x5f [ 54.646814] register_cdrom.cold.24+0x2a/0x33 [ 54.646814] sr_probe+0x4bd/0x580 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] really_probe+0xd6/0x260 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] driver_probe_device+0x4a/0xb0 [ 54.646814] ? __driver_attach+0xd0/0xd0 [ 54.646814] bus_for_each_drv+0x73/0xc0 [ 54.646814] __device_attach+0xd6/0x130 [ 54.646814] bus_probe_device+0x9a/0xb0 [ 54.646814] device_add+0x40c/0x670 [ 54.646814] ? __pm_runtime_resume+0x4f/0x80 [ 54.646814] scsi_sysfs_add_sdev+0x81/0x290 [ 54.646814] scsi_probe_and_add_lun+0x888/0xc00 [ 54.646814] ? scsi_autopm_get_host+0x21/0x40 [ 54.646814] __scsi_add_device+0x116/0x130 [ 54.646814] ata_scsi_scan_host+0x93/0x1c0 [ 54.646814] async_run_entry_fn+0x34/0x100 [ 54.646814] process_one_work+0x237/0x5e0 [ 54.646814] worker_thread+0x37/0x380 [ 54.646814] ? rescuer_thread+0x360/0x360 [ 54.646814] kthread+0x118/0x130 [ 54.646814] ? kthread_create_on_node+0x60/0x60 [ 54.646814] ret_from_fork+0x3a/0x50 The only sensible explanation is that cdrom_sysctl_register() is called twice, once from the module init function and once from register_cdrom(). cdrom_sysctl_register() is not mutex protected and may happily execute twice if the second call is made before the first call is complete. Use a static atomic to ensure that the function is executed exactly once. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Manfred Schlaegl authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit a5399db1 ] There is no clipping on the x or y axis for logos larger that the framebuffer size. Therefore: a logo bigger than screen size leads to invalid memory access: [ 1.254664] Backtrace: [ 1.254728] [<c02714e0>] (cfb_imageblit) from [<c026184c>] (fb_show_logo+0x620/0x684) [ 1.254763] r10:00000003 r9:00027fd8 r8:c6a40000 r7:c6a36e50 r6:00000000 r5:c06b81e4 [ 1.254774] r4:c6a3e800 [ 1.254810] [<c026122c>] (fb_show_logo) from [<c026c1e4>] (fbcon_switch+0x3fc/0x46c) [ 1.254842] r10:c6a3e824 r9:c6a3e800 r8:00000000 r7:c6a0c000 r6:c070b014 r5:c6a3e800 [ 1.254852] r4:c6808c00 [ 1.254889] [<c026bde8>] (fbcon_switch) from [<c029c8f8>] (redraw_screen+0xf0/0x1e8) [ 1.254918] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:c070d5a0 r5:00000080 [ 1.254928] r4:c6808c00 [ 1.254961] [<c029c808>] (redraw_screen) from [<c029d264>] (do_bind_con_driver+0x194/0x2e4) [ 1.254991] r9:00000000 r8:00000000 r7:00000014 r6:c070d5a0 r5:c070d5a0 r4:c070d5a0 So prevent displaying a logo bigger than screen size and avoid invalid memory access. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 596b5a5d ] Currently sysfs_strtoul_clamp() is defined as, 82 #define sysfs_strtoul_clamp(file, var, min, max) \ 83 do { \ 84 if (attr == &sysfs_ ## file) \ 85 return strtoul_safe_clamp(buf, var, min, max) \ 86 ?: (ssize_t) size; \ 87 } while (0) The problem is, if bit width of var is less then unsigned long, min and max may not protect var from integer overflow, because overflow happens in strtoul_safe_clamp() before checking min and max. To fix such overflow in sysfs_strtoul_clamp(), to make min and max take effect, this patch adds an unsigned long variable, and uses it to macro strtoul_safe_clamp() to convert an unsigned long value in range defined by [min, max]. Then assign this value to var. By this method, if bit width of var is less than unsigned long, integer overflow won't happen before min and max are checking. Now sysfs_strtoul_clamp() can properly handle smaller data type like unsigned int, of cause min and max should be defined in range of unsigned int too. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 8c27a395 ] People may set sequential_cutoff of a cached device via sysfs file, but current code does not check input value overflow. E.g. if value 4294967295 (UINT_MAX) is written to file sequential_cutoff, its value is 4GB, but if 4294967296 (UINT_MAX + 1) is written into, its value will be 0. This is an unexpected behavior. This patch replaces d_strtoi_h() by sysfs_strtoul_clamp() to convert input string to unsigned integer value, and limit its range in [0, UINT_MAX]. Then the input overflow can be fixed. Signed-off-by:
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit a91fbda4 ] Cache set sysfs entry io_error_halflife is used to set c->error_decay. c->error_decay is in type unsigned int, and it is converted by strtoul_or_return(), therefore overflow to c->error_decay is possible for a large input value. This patch fixes the overflow by using strtoul_safe_clamp() to convert input string to an unsigned long value in range [0, UINT_MAX], then divides by 88 and set it to c->error_decay. Signed-off-by:
-
Ranjani Sridharan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit d9c0b2af ] BE dai links only have internal PCM's and their substream ops may not be set. Suspending these PCM's will result in their ops->trigger() being invoked and cause a kernel oops. So skip suspending PCM's if their ops are NULL. [ NOTE: this change is required now for following the recent PCM core change to get rid of snd_pcm_suspend() call. Since DPCM BE takes the runtime carried from FE while keeping NULL ops, it can hit this bug. See details at: https://github.com/thesofproject/linux/pull/582 -- tiwai ] Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Nathan Chancellor authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit de9c0d49 ] While building arm32 allyesconfig, I ran into the following errors: arch/arm/lib/xor-neon.c:17:2: error: You should compile this file with '-mfloat-abi=softfp -mfpu=neon' In file included from lib/raid6/neon1.c:27: /home/nathan/cbl/prebuilt/lib/clang/8.0.0/include/arm_neon.h:28:2: error: "NEON support not enabled" Building V=1 showed NEON_FLAGS getting passed along to Clang but __ARM_NEON__ was not getting defined. Ultimately, it boils down to Clang only defining __ARM_NEON__ when targeting armv7, rather than armv6k, which is the '-march' value for allyesconfig. >From lib/Basic/Targets/ARM.cpp in the Clang source: // This only gets set when Neon instructions are actually available, unlike // the VFP define, hence the soft float and arch check. This is subtly // different from gcc, we follow the intent which was that it should be set // when Neon instructions are actually available. if ((FPU & NeonFPU) && !SoftFloat && ArchVersion >= 7) { Builder.defineMacro("__ARM_NEON", "1"); Builder.defineMacro("__ARM_NEON__"); // current AArch32 NEON implementations do not support double-precision // floating-point even when it is present in VFP. Builder.defineMacro("__ARM_NEON_FP", "0x" + Twine::utohexstr(HW_FP & ~HW_FP_DP)); } Ard Biesheuvel recommended explicitly adding '-march=armv7-a' at the beginning of the NEON_FLAGS definitions so that __ARM_NEON__ always gets definined by Clang. This doesn't functionally change anything because that code will only run where NEON is supported, which is implicitly armv7. Link: https://github.com/ClangBuiltLinux/linux/issues/287Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Andrea Righi authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 02106f88 ] Since kprobe breakpoing handler is using bsearch(), probing on this routine can cause recursive breakpoint problem. int3 ->do_int3() ->ftrace_int3_handler() ->ftrace_location() ->ftrace_location_range() ->bsearch() -> int3 Prohibit probing on bsearch(). Signed-off-by:
Andrea Righi <righi.andrea@gmail.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/154998813406.31052.8791425358974650922.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michal Kazior authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 5ddb0869 ] I've stumbled upon a kernel crash and the logs pointed me towards the lp5562 driver: > <4>[306013.841294] lp5562 0-0030: Direct firmware load for lp5562 failed with error -2 > <4>[306013.894990] lp5562 0-0030: Falling back to user helper > ... > <3>[306073.924886] lp5562 0-0030: firmware request failed > <1>[306073.939456] Unable to handle kernel NULL pointer dereference at virtual address 00000000 > <4>[306074.251011] PC is at _raw_spin_lock+0x1c/0x58 > <4>[306074.255539] LR is at release_firmware+0x6c/0x138 > ... After taking a look I noticed firmware_release() could be called with either NULL or a dangling pointer. Fixes: 10c06d17 ("leds-lp55xx: support firmware interface") Signed-off-by:
Michal Kazior <michal@plume.com> Signed-off-by:
-
Ezequiel Garcia authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 8d20dcef ] Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Ezequiel Garcia authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 30fa627b ] Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 4a88f898 ] Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Ezequiel Garcia authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 43c14519 ] Fix the assigned type of mem2mem buffer handling API. Namely, these functions: v4l2_m2m_next_buf v4l2_m2m_last_buf v4l2_m2m_buf_remove v4l2_m2m_next_src_buf v4l2_m2m_next_dst_buf v4l2_m2m_last_src_buf v4l2_m2m_last_dst_buf v4l2_m2m_src_buf_remove v4l2_m2m_dst_buf_remove return a struct vb2_v4l2_buffer, and not a struct vb2_buffer. Fixing this is necessary to fix the mem2mem buffer handling API, changing the return to the correct struct vb2_v4l2_buffer instead of a void pointer. Signed-off-by:
-
Wen Yang authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 8fa857da ] The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Detected by coccinelle with the following warnings: ./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device; call of_find_device_by_node on line 105, but without a corresponding object release within this function. ./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device; call of_find_device_by_node on line 105, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <yellowriver2010@hotmail.com> Cc: Timur Tabi <timur@kernel.org> Cc: Nicolin Chen <nicoleotsuka@gmail.com> Cc: Xiubo Li <Xiubo.Lee@gmail.com> Cc: Fabio Estevam <festevam@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: alsa-devel@alsa-project.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Thomas Richter authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 03d30971 ] Commit 489338a7 ("perf tests evsel-tp-sched: Fix bitwise operator") causes test case 14 "Parse sched tracepoints fields" to fail on s390. This test succeeds on x86. In fact this test now fails on all architectures with type char treated as type unsigned char. The root cause is the signed-ness of character arrays in the tracepoints sched_switch for structure members prev_comm and next_comm. On s390 the output of: [root@m35lp76 perf]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 287 format: field:unsigned short common_type; offset:0; size:2; signed:0; ... field:char prev_comm[16]; offset:8; size:16; signed:0; ... field:char next_comm[16]; offset:40; size:16; signed:0; reveals the character arrays prev_comm and next_comm are per default unsigned char and have values in the range of 0..255. On x86 both fields are signed as this output shows: [root@f29]# cat /sys/kernel/debug/tracing/events/sched/sched_switch/format name: sched_switch ID: 287 format: field:unsigned short common_type; offset:0; size:2; signed:0; ... field:char prev_comm[16]; offset:8; size:16; signed:1; ... field:char next_comm[16]; offset:40; size:16; signed:1; and the character arrays prev_comm and next_comm are per default signed char and have values in the range of -1..127. The implementation of type char is architecture specific. Since the character arrays in both tracepoints sched_switch and sched_wakeup should contain ascii characters, simply omit the check for signedness in the test case. Output before: [root@m35lp76 perf]# ./perf test -F 14 14: Parse sched tracepoints fields : --- start --- sched:sched_switch: "prev_comm" signedness(0) is wrong, should be 1 sched:sched_switch: "next_comm" signedness(0) is wrong, should be 1 sched:sched_wakeup: "comm" signedness(0) is wrong, should be 1 ---- end ---- 14: Parse sched tracepoints fields : FAILED! [root@m35lp76 perf]# Output after: [root@m35lp76 perf]# ./perf test -Fv 14 14: Parse sched tracepoints fields : --- start --- ---- end ---- Parse sched tracepoints fields: Ok [root@m35lp76 perf]# Fixes: 489338a7 ("perf tests evsel-tp-sched: Fix bitwise operator") Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190219153639.31267-1-tmricht@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jason Yan authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit bcf3b67d ] when create DMA pool for cmd frames failed, we should return -ENOMEM, instead of 0. In some case in: megasas_init_adapter_fusion() -->megasas_alloc_cmds() -->megasas_create_frame_pool create DMA pool failed, --> megasas_free_cmds() [1] -->megasas_alloc_cmds_fusion() failed, then goto fail_alloc_cmds. -->megasas_free_cmds() [2] we will call megasas_free_cmds twice, [1] will kfree cmd_list, [2] will use cmd_list.it will cause a problem: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ffffffc000f70000 [00000000] *pgd=0000001fbf893003, *pud=0000001fbf893003, *pmd=0000001fbf894003, *pte=006000006d000707 Internal error: Oops: 96000005 [#1] SMP Modules linked in: CPU: 18 PID: 1 Comm: swapper/0 Not tainted task: ffffffdfb9290000 ti: ffffffdfb923c000 task.ti: ffffffdfb923c000 PC is at megasas_free_cmds+0x30/0x70 LR is at megasas_free_cmds+0x24/0x70 ... Call trace: [<ffffffc0005b779c>] megasas_free_cmds+0x30/0x70 [<ffffffc0005bca74>] megasas_init_adapter_fusion+0x2f4/0x4d8 [<ffffffc0005b926c>] megasas_init_fw+0x2dc/0x760 [<ffffffc0005b9ab0>] megasas_probe_one+0x3c0/0xcd8 [<ffffffc0004a5abc>] local_pci_probe+0x4c/0xb4 [<ffffffc0004a5c40>] pci_device_probe+0x11c/0x14c [<ffffffc00053a5e4>] driver_probe_device+0x1ec/0x430 [<ffffffc00053a92c>] __driver_attach+0xa8/0xb0 [<ffffffc000538178>] bus_for_each_dev+0x74/0xc8 [<ffffffc000539e88>] driver_attach+0x28/0x34 [<ffffffc000539a18>] bus_add_driver+0x16c/0x248 [<ffffffc00053b234>] driver_register+0x6c/0x138 [<ffffffc0004a5350>] __pci_register_driver+0x5c/0x6c [<ffffffc000ce3868>] megasas_init+0xc0/0x1a8 [<ffffffc000082a58>] do_one_initcall+0xe8/0x1ec [<ffffffc000ca7be8>] kernel_init_freeable+0x1c8/0x284 [<ffffffc0008d90b8>] kernel_init+0x1c/0xe4 Signed-off-by:
Jason Yan <yanaijie@huawei.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Håkon Bugge authored
BugLink: https://bugs.launchpad.net/bugs/1828420 [ Upstream commit 2612d723 ] Using CX-3 virtual functions, either from a bare-metal machine or pass-through from a VM, MAD packets are proxied through the PF driver. Since the VF drivers have separate name spaces for MAD Transaction Ids (TIDs), the PF driver has to re-map the TIDs and keep the book keeping in a cache. Following the RDMA Connection Manager (CM) protocol, it is clear when an entry has to evicted form the cache. But life is not perfect, remote peers may die or be rebooted. Hence, it's a timeout to wipe out a cache entry, when the PF driver assumes the remote peer has gone. During workloads where a high number of QPs are destroyed concurrently, excessive amount of CM DREQ retries has been observed The problem can be demonstrated in a bare-metal environment, where two nodes have instantiated 8 VFs each. This using dual ported HCAs, so we have 16 vPorts per physical server. 64 processes are associated with each vPort and creates and destroys one QP for each of the remote 64 processes. That is, 1024 QPs per vPort, all in all 16K QPs. The QPs are created/destroyed using the CM. When tearing down these 16K QPs, excessive CM DREQ retries (and duplicates) are observed. With some cat/paste/awk wizardry on the infiniband_cm sysfs, we observe as sum of the 16 vPorts on one of the nodes: cm_rx_duplicates: dreq 2102 cm_rx_msgs: drep 1989 dreq 6195 rep 3968 req 4224 rtu 4224 cm_tx_msgs: drep 4093 dreq 27568 rep 4224 req 3968 rtu 3968 cm_tx_retries: dreq 23469 Note that the active/passive side is equally distributed between the two nodes. Enabling pr_debug in cm.c gives tons of: [171778.814239] <mlx4_ib> mlx4_ib_multiplex_cm_handler: id{slave: 1,sl_cm_id: 0xd393089f} is NULL! By increasing the CM_CLEANUP_CACHE_TIMEOUT from 5 to 30 seconds, the tear-down phase of the application is reduced from approximately 90 to 50 seconds. Retries/duplicates are also significantly reduced: cm_rx_duplicates: dreq 2460 [] cm_tx_retries: dreq 3010 req 47 Increasing the timeout further didn't help, as these duplicates and retries stems from a too short CMA timeout, which was 20 (~4 seconds) on the systems. By increasing the CMA timeout to 22 (~17 seconds), the numbers fell down to about 10 for both of them. Adjustment of the CMA timeout is not part of this commit. Signed-off-by:
Håkon Bugge <haakon.bugge@oracle.com> Acked-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
