- 11 Apr, 2021 11 commits
-
-
Lorenzo Bianconi authored
Enable hw rx-amsdu de-aggregation support available in 7915 devices. This is a preliminary patch to enable rx checksum offload Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Do not try to access the header when receiving them Signed-off-by: -
Arnd Bergmann authored
There are a couple of warnings in this driver when building with W=1: drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_power_set_mode': drivers/net/wireless/intel/iwlegacy/common.c:1195:60: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 1195 | il->chain_noise_data.state); | ^ drivers/net/wireless/intel/iwlegacy/common.c: In function 'il_do_scan_abort': drivers/net/wireless/intel/iwlegacy/common.c:1343:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] Change the empty debug macros to no_printk(), which avoids the warnings and adds useful format string checks. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210322104343.948660-3-arnd@kernel.org
-
Lorenzo Bianconi authored
Notify mac80211 the mt7601u chipset support 802.11 TDLS. The feature has been tested with a mt7610u peer. Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Colin Ian King authored
Currently the expression ~nic_conf1 is always true because nic_conf1 is a u16 and according to 6.5.3.3 of the C standard the ~ operator promotes the u16 to an integer before flipping all the bits. Thus the top 16 bits of the integer result are all set so the expression is always true. If the intention was to flip all the bits of nic_conf1 then casting the integer result back to a u16 is a suitabel fix. Interestingly static analyzers seem to thing a bitwise ! should be used instead of ~ for this scenario, so I think the original intent of the expression may need some extra consideration. Addresses-Coverity: ("Logical vs. bitwise operator") Fixes: c869f77d ("add mt7601u driver") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Signed-off-by:
-
Dan Carpenter authored
The sscanf() function returns the number of matches (0 or 1 in this case). It doesn't return error codes. We should return -EINVAL if the string is invalid Fixes: c376c1fc ("rtw88: add h2c command in debugfs") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Ching-Te Ku authored
While WL scan, WL is more high priority than BT. The packets from AP will be a big interference to A2DP. It will lead to A2DP stutters. Stop answering CTS to AP to decrease AP's packets Tx while WL scan + WL busy. Enable BT AFH feature to make BT leave away from WL channel. Desired BT firmware BT-COEX version: 0x1c Desired WL firmware version: 9.9.x Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Po-Hao Huang authored
Fix power tracking issue by replacing unnecessary IQ calibration with LC calibration. When thermal difference exceeds limitation, let RF circuit adjsut its characteristic to fit in current environment. Signed-off-by:
Po-Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
update tx power limits to RF v40 and apply fix on FCC's channel 12 and 13, so change the patch level to 1. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Zong-Zhe Yang authored
DIG min is expected to be set according to chip. And actually we assigned it under each chip information. However, we didn't use the setting when we did DIG process. It is unexpected, so we fix it. Signed-off-by:
-
Zong-Zhe Yang authored
Though mac queue flushing has been supported, sometimes data may be waiting on interface from host to chip. If it occurs, there may still be data that flows into mac just after we do flush. To avoid that, we add the hci part of flushing. Signed-off-by:
-
- 15 Mar, 2021 7 commits
-
-
Zong-Zhe Yang authored
Although FW crash logs are already supported for dumping in driver, the logs may not be sufficient to analyze field issues. To improve this part, we add a support to dump FW memory. When driver receives FW crash notifications, driver uses DDMA, which is a HW ability, to copy specified FW memory to FW fifo. Driver can then dump these information from FW fifo. With this support, not only FW crash log but also specified FW memory will be dumped while FW crash. Besides, specified registers are also dumped. This feature is implemeted on 8822C first due to difference of FW layouts between ICs. In addition, we add a debugfs to trigger FW crash. It can simulate the process of crash, dump and reset. Through it, we can also check if a reset is ongoing. Signed-off-by:
-
Ajay Singh authored
Use same cookie for request_threaded_irq() & free_irq() to properly free IRQ during module unload. free_irq() already uses *wilc* handler so the changes are required for request_threaded_irq(). Signed-off-by:
Ajay Singh <ajay.kathat@microchip.com> Signed-off-by:
-
Marcus Folkesson authored
Write the value instead of reading it twice. Fixes: c5c77ba1 ("staging: wilc1000: Add SDIO/SPI 802.11 driver") Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by:
-
David Mosberger-Tang authored
chip_allow_sleep() only supported wakeup via SDIO, which made the driver unusable over SPI. This code is a straight forward port from the driver in the linux-at91 repository. Signed-off-by:
David Mosberger-Tang <davidm@egauge.net> Acked-by:
-
wengjianfeng authored
The variable ret is defined at the beginning and initialized to 0 until the function returns ret, and the variable ret is not reassigned.Therefore, we do not need to define the variable ret, just return 0 directly at the end of the function. Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Signed-off-by:
-
Ping-Ke Shih authored
Clear WL/BT on/off bit in scoreboard register that is used to exchange WL/BT status. Since the status is preserved after warm reboot, we must clear it when WL is going to down. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.13. Major changes: ath11k * add initial support for QCN9074, but not enabled yet due to firmware problems * enable radar detection for 160MHz secondary segment * handle beacon misses in station mode
-
- 14 Mar, 2021 22 commits
-
-
David S. Miller authored
Ido Schimmel says: ==================== psample: Add additional metadata attributes This series extends the psample module to expose additional metadata to user space for packets sampled via act_sample. The new metadata (e.g., transit delay) can then be consumed by applications such as hsflowd [1] for better network observability. netdevsim is extended with a dummy psample implementation that periodically reports "sampled" packets to the psample module. In addition to testing of the psample module, it enables the development and demonstration of user space applications (e.g., hsflowd) that are interested in the new metadata even without access to specialized hardware (e.g., Spectrum ASIC) that can provide it. mlxsw is also extended to provide the new metadata to psample. A Wireshark dissector for psample netlink packets [2] will be submitted upstream after the kernel patches are accepted. In addition, a libpcap capture module for psample is currently in the works. Eventually, users should be able to run: # tshark -i psample In order to consume sampled packets along with their metadata. Series overview: Patch #1 makes it easier to extend the metadata provided to psample Patch #2 adds the new metadata attributes to psample Patch #3 extends netdevsim to periodically report "sampled" packets to psample. Various debugfs knobs are added to control the reporting Patch #4 adds a selftest over netdevsim Patches #5-#10 gradually add support for the new metadata in mlxsw Patch #11 adds a selftest over mlxsw [1] https://sflow.org/draft4_sflow_transit.txt [2] https://gitlab.com/amitcohen1/wireshark/-/commit/3d711143024e032aef1b056dd23f0266c54fab56 ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Test that packets are sampled when tc-sample is used and that reported metadata is correct. Two sets of hosts (with and without LAG) are used, since metadata extraction in mlxsw is a bit different when LAG is involved. # ./tc_sample.sh TEST: tc sample rate (forward) [ OK ] TEST: tc sample rate (local receive) [ OK ] TEST: tc sample maximum rate [ OK ] TEST: tc sample group conflict test [ OK ] TEST: tc sample iif [ OK ] TEST: tc sample lag iif [ OK ] TEST: tc sample oif [ OK ] TEST: tc sample lag oif [ OK ] TEST: tc sample out-tc [ OK ] TEST: tc sample out-tc-occ [ OK ] Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
Make use of the previously added metadata and report it to the psample module. The metadata is read from the skb's control block, which was initialized by the bus driver (i.e., 'mlxsw_pci') after decoding the packet's Completion Queue Element (CQE). Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
The function resolves the psample sampling group from the Rx port because this is the only form of sampling the driver currently supports. Subsequent patches are going to add support for Tx-based and policy-based sampling, in which case the sampling group would not be resolved from the Rx port. Therefore, move this code to the Rx-specific sampling listener. Signed-off-by:
-
Ido Schimmel authored
Since commit 7d8e8f34 ("mlxsw: core: Increase scope of RCU read-side critical section"), all Rx handlers are called from an RCU read-side critical section. Remove the unnecessary rcu_read_lock() / rcu_read_unlock(). Signed-off-by:
-
Ido Schimmel authored
Packets that are mirrored / sampled to the CPU have extra metadata encoded in their corresponding Completion Queue Element (CQE). Retrieve this metadata from the CQE and set it in the skb control block so that it could be accessed by the switch driver (i.e., 'mlxsw_spectrum'). Signed-off-by:
-
Ido Schimmel authored
Next patch will need to encode more Rx metadata in the skb control block, so create a dedicated field for it and move the cookie index there. Signed-off-by:
-
Ido Schimmel authored
The Completion Queue Element version 2 (CQEv2) includes various metadata fields for packets that are mirrored / sampled to the CPU. Add these fields so that they could be used by a later patch. Signed-off-by:
-
Ido Schimmel authored
Test various aspects of psample functionality over netdevsim and in particular test that the psample module correctly reports the provided metadata. Example: # ./psample.sh TEST: psample enable / disable [ OK ] TEST: psample group number [ OK ] TEST: psample metadata [ OK ] Signed-off-by:
-
Ido Schimmel authored
Allow netdevsim to report "sampled" packets to the psample module by periodically generating packets from a work queue. The behavior can be enabled / disabled (default) and the various meta data attributes can be controlled via debugfs knobs. This implementation enables both testing of the psample module with all the optional attributes as well as development of user space applications on top of psample such as hsflowd and a Wireshark dissector for psample generic netlink packets. Signed-off-by:
-
Ido Schimmel authored
Extend psample to report the following attributes when available: * Output traffic class as a 16-bit value * Output traffic class occupancy in bytes as a 64-bit value * End-to-end latency of the packet in nanoseconds resolution * Software timestamp in nanoseconds resolution (always available) * Packet's protocol. Needed for packet dissection in user space (always available) Signed-off-by:
-
Ido Schimmel authored
Currently, callers of psample_sample_packet() pass three metadata attributes: Ingress port, egress port and truncated size. Subsequent patches are going to add more attributes (e.g., egress queue occupancy), which also need an indication whether they are valid or not. Encapsulate packet metadata in a struct in order to keep the number of arguments reasonable. Signed-off-by:
-
David S. Miller authored
Alexander Lobakin says: ==================== skbuff: micro-optimize flow dissection This little number makes all of the flow dissection functions take raw input data pointer as const (1-5) and shuffles the branches in __skb_header_pointer() according to their hit probability. The result is +20 Mbps per flow/core with one Flow Dissector pass per packet. This affects RPS (with software hashing), drivers that use eth_get_headlen() on their Rx path and so on. From v2 [1]: - reword some commit messages as a potential fix for NIPA; - no functional changes. From v1 [0]: - rebase on top of the latest net-next. This was super-weird, but I double-checked that the series applies with no conflicts, and then on Patchwork it didn't; - no other changes. [0] https://lore.kernel.org/netdev/20210312194538.337504-1-alobakin@pm.me [1] https://lore.kernel.org/netdev/20210313113645.5949-1-alobakin@pm.me ==================== Signed-off-by:
-
Alexander Lobakin authored
{,__}skb_header_pointer() helpers exist mainly for preventing accesses-beyond-end of the linear data. In the vast majorify of cases, they bail out on the first condition. All code going after is mostly a fallback. Mark the most common branch as 'likely' one to move it in-line. Also, skb_copy_bits() can return negative values only when the input arguments are invalid, e.g. offset is greater than skb->len. It can be safely marked as 'unlikely' branch, assuming that hotpath code provides sane input to not fail here. These two bump the throughput with a single Flow Dissector pass on every packet (e.g. with RPS or driver that uses eth_get_headlen()) on 20 Mbps per flow/core. Signed-off-by:Alexander Lobakin <alobakin@pm.me> Signed-off-by:
-
Alexander Lobakin authored
It's used only for flow dissection, which now takes constant data pointers. Signed-off-by:
-
Alexander Lobakin authored
Caught by the text editor. Fix it separately from the actual changes. Signed-off-by:
-
Alexander Lobakin authored
Flow Dissector code never modifies the input buffer, neither skb nor raw data. Make 'data' argument const for all of the Flow dissector's functions. Signed-off-by:
-
Alexander Lobakin authored
The function never modifies the input buffer, so 'data' argument can be marked as const. This implies one harmless cast-away. Signed-off-by:
-
Alexander Lobakin authored
BPF Flow dissection programs are read-only and don't touch input buffers. Mark 'data' and 'data_end' in struct bpf_flow_dissector as const in preparation for global input constifying. Signed-off-by:
-
David S. Miller authored
Alexander Lobakin says: ==================== gro: micro-optimize dev_gro_receive() This random series addresses some of suboptimal constructions used in the main GRO entry point. The main body is gro_list_prepare() simplification and pointer usage optimization in dev_gro_receive() itself. Being mostly cosmetic, it gives like +10 Mbps on my setup to both TCP and UDP (both single- and multi-flow). Since v1 [0]: - drop the replacement of bucket index calculation with reciprocal_scale() since it makes absolutely no sense (Eric); - improve stack usage in dev_gro_receive() (Eric); - reverse the order of patches to avoid changes superseding. [0] https://lore.kernel.org/netdev/20210312162127.239795-1-alobakin@pm.me ==================== Signed-off-by:
-
Alexander Lobakin authored
'hash' stores not the flow hash, but the index of the GRO bucket corresponding to it. Change its name to 'bucket' to avoid confusion while reading lines like '__set_bit(hash, &napi->gro_bitmask)'. Signed-off-by:
-
Alexander Lobakin authored
GRO bucket index doesn't change through the entire function. Store a pointer to the corresponding bucket instead of its member and use it consistently through the function. It is performance-safe since &gro_list->list == gro_list. Misc: remove superfluous braces around single-line branches. Signed-off-by:
-
