- 16 Nov, 2017 25 commits
-
-
Huacai Chen authored
This patch try to fix the building error on MIPS. The reason is MIPS has already defined the LONG macro, which conflicts with the LONG enum in drivers/net/ethernet/fealnx.c. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== 1) Copy policy family in clone_policy, otherwise this can trigger a BUG_ON in af_key. From Herbert Xu. 2) Revert "xfrm: Fix stack-out-of-bounds read in xfrm_state_find." This added a regression with transport mode when no addresses are configured on the policy template. Both patches are stable candidates. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Arvind Yadav says: ==================== isdn: hisax: Fix pnp_irq's error checking The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
pnp_irq() and pnp_port_start() can fail here and we must check its return value. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arvind Yadav authored
The pnp_irq() function returns -1 if an error occurs. pnp_irq() error checking for zero is not correct. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jon Maloy authored
The socket level flow control is based on the assumption that incoming buffers meet the condition (skb->truesize / roundup(skb->len) <= 4), where the latter value is rounded off upwards to the nearest 1k number. This does empirically hold true for the device drivers we know, but we cannot trust that it will always be so, e.g., in a system with jumbo frames and very small packets. We now introduce a check for this condition at packet arrival, and if we find it to be false, we copy the packet to a new, smaller buffer, where the condition will be true. We expect this to affect only a small fraction of all incoming packets, if at all. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
This function is no longer marked 'inline', so we now get a warning when it is unused: net/netfilter/nf_conntrack_netlink.c:536:15: error: 'ctnetlink_proto_size' defined but not used [-Werror=unused-function] We could mark it inline again, mark it __maybe_unused, or add an #ifdef around the definition. I'm picking the third approach here since that seems to be what the rest of the file has. Fixes: 5caaed15 ("netfilter: conntrack: don't cache nlattr_tuple_size result in nla_size") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
Now CPSW driver configures min eth packet size to 60 octets (ETH_ZLEN) which works in most of cases, but when port VLAN is configured on some switch port, it also can be configured to force all egress packets to be VLAN untagged. And in this case, CPSW driver will pad small packets to 60 octets, but final packet size on port egress can became less than 60 octets due to VLAN tag removal and packet will be dropped. Hence, fix it by accounting VLAN header in CPSW min eth packet size. While here, use proper defines for CPSW_MAX_PACKET_SIZE also, instead of open coding. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ahmed Abdelsalam authored
The IPv6 Segment Routing Header (SRH) format has been updated (revision 6 of the SRH ietf draft). The update includes the following SRH fields: (1) The "First Segment" field changed to be "Last Entry" which contains the index, in the Segment List, of the last element of the Segment List. (2) The 16 bit "reserved" field now is used as a "tag" which tags a packet as part of a class or group of packets, e.g.,packets sharing the same set of properties. This patch updates the struct ipv6_sr_hdr, so it complies with the updated SRH draft. The 16 bit "reserved" field is changed to be "tag", In addition a comment is added to the "first_segment" field, showing that it represents the "Last Entry" field of the SRH. Signed-off-by:
Ahmed Abdelsalam <amsalam20@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vitaly Kuznetsov authored
rndis_filter_device_add() is called both from netvsc_probe() when we initially create the device and from set channels/mtu/ringparam routines where we basically remove the device and add it back. hw_features is reset in rndis_filter_device_add() and filled with host data. However, we lose all additional flags which are set outside of the driver, e.g. register_netdevice() adds NETIF_F_SOFT_FEATURES and many others. Unfortunately, calls to rndis_{query_hwcaps(), _set_offload_params()} calls cannot be avoided on every RNDIS reset: host expects us to set required features explicitly. Moreover, in theory hardware capabilities can change and we need to reflect the change in hw_features. Reset net->hw_features bits according to host data in rndis_netdev_set_hwcaps(), clear corresponding feature bits from net->features in case some features went missing (will never happen in real life I guess but let's be consistent). Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Replace kmalloc followed by a memset with kzalloc Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Ariel Elior <aelior@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kubecek authored
According to the description, first argument of genlmsg_nlhdr() points to what genlmsg_put() returns, i.e. beginning of user header. Therefore we should only subtract size of genetlink header and netlink message header, not user header. This also means we don't need to pass the pointer to genetlink family and the same is true for genl_dump_check_consistent() which is the only caller of genlmsg_nlhdr(). (Note that at the moment, these functions are only used for families which do not have user header so that they are not affected.) Fixes: 670dc283 ("netlink: advertise incomplete dumps") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now when resetting stream, if both in and out flags are set, the info len can reach: sizeof(struct sctp_strreset_outreq) + SCTP_MAX_STREAM(65535) + sizeof(struct sctp_strreset_inreq) + SCTP_MAX_STREAM(65535) even without duplicated stream no, this value is far greater than the chunk's max size. _sctp_make_chunk doesn't do any check for this, which would cause the skb it allocs is huge, syzbot even reported a crash due to this. This patch is to check stream reset info len before making reconf chunk and return EINVAL if the len exceeds chunk's capacity. Thanks Marcelo and Neil for making this clear. v1->v2: - move the check into sctp_send_reset_streams instead. Fixes: cc16f00f ("sctp: add support for generating stream reconf ssn reset request chunk") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Commit dfcb9f4f ("sctp: deny peeloff operation on asocs with threads sleeping on it") fixed the race between peeloff and wait sndbuf by checking waitqueue_active(&asoc->wait) in sctp_do_peeloff(). But it actually doesn't work, as even if waitqueue_active returns false the waiting sndbuf thread may still not yet hold sk lock. After asoc is peeled off, sk is not asoc->base.sk any more, then to hold the old sk lock couldn't make assoc safe to access. This patch is to fix this by changing to hold the new sk lock if sk is not asoc->base.sk, meanwhile, also set the sk in sctp_sendmsg with the new sk. With this fix, there is no more race between peeloff and waitbuf, the check 'waitqueue_active' in sctp_do_peeloff can be removed. Thanks Marcelo and Neil for making this clear. v1->v2: fix it by changing to lock the new sock instead of adding a flag in asoc. Suggested-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
Now in sctp_sendmsg sctp_wait_for_sndbuf could schedule out without holding sock sk. It means the current asoc can be freed elsewhere, like when receiving an abort packet. If the asoc is just created in sctp_sendmsg and sctp_wait_for_sndbuf returns err, the asoc will be freed again due to new_asoc is not nil. An use-after-free issue would be triggered by this. This patch is to fix it by setting new_asoc with nil if the asoc is already dead when cpu schedules back, so that it will not be freed again in sctp_sendmsg. v1->v2: set new_asoc as nil in sctp_sendmsg instead of sctp_wait_for_sndbuf. Suggested-by:
Neil Horman <nhorman@tuxdriver.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 15 Nov, 2017 15 commits
-
-
git://github.com/cminyard/linux-ipmiLinus Torvalds authored
Pull IPMI updates from Corey Minyard: "This is a fairly large rework of the IPMI code, along with a bunch of smaller fixes. The major changes have been in the next tree for a couple of months, so they should be good to do in. - Some users had IPMI systems where the GUID of the IPMI controller could change. So rescanning of the GUID was added. The naming of some sysfs things was dependent on the GUID, however, so this resulted in the sysfs interface code in IPMI changing to remove that dependency and name the IPMI BMCs like other sysfs devices. - The ipmi_si_intf.c code was fairly bloated with all the different discovery methods (PCI, ACPI, SMBIOS, OF, platform, module parameters, hot add). The structure of how the interfaces were added was redone to make them more modular, then the individual methods were pulled out into their own files" * tag 'ipmi-for-4.15' of git://github.com/cminyard/linux-ipmi: (48 commits) ipmi_si: Delete an error message for a failed memory allocation in try_smi_init() ipmi_si: fix memory leak on new_smi ipmi: remove redundant initialization of bmc ipmi: pr_err() strings should end with newlines ipmi: Clean up some print operations ipmi: Make the DMI probe into a generic platform probe ipmi: Make the IPMI proc interface configurable ipmi_ssif: Add device attrs for the things in proc ipmi_si: Add device attrs for the things in proc ipmi_si: remove ipmi_smi_alloc() function ipmi_si: Move port and mem I/O handling to their own files ipmi_si: Get rid of unused spacing and port fields ipmi_si: Move PARISC handling to another file ipmi_si: Move PCI setup to another file ipmi_si: Move platform device handling to another file ipmi_si: Move hardcode handling to a separate file. ipmi_si: Move the hotmod handling to another file. ipmi_si: Change ipmi_si_add_smi() to take just I/O info ipmi_si: Move io setup into io structure ipmi_si: Move irq setup handling into the io struct ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI updates from Bjorn Helgaas: - detach driver before tearing down procfs/sysfs (Alex Williamson) - disable PCIe services during shutdown (Sinan Kaya) - fix ASPM oops on systems with no Root Ports (Ard Biesheuvel) - fix ASPM LTR_L1.2_THRESHOLD programming (Bjorn Helgaas) - fix ASPM Common_Mode_Restore_Time computation (Bjorn Helgaas) - fix portdrv MSI/MSI-X vector allocation (Dongdong Liu, Bjorn Helgaas) - report non-fatal AER errors only to the affected endpoint (Gabriele Paoloni) - distribute bus numbers, MMIO, and I/O space among hotplug bridges to allow more devices to be hot-added (Mika Westerberg) - fix pciehp races during initialization and surprise link down (Mika Westerberg) - handle surprise-removed devices in PME handling (Qiang) - support resizable BARs for large graphics devices (Christian König) - expose SR-IOV offset, stride, and VF device ID via sysfs (Filippo Sironi) - create SR-IOV virtfn/physfn sysfs links before attaching driver (Stuart Hayes) - fix SR-IOV "ARI Capable Hierarchy" restore issue (Tony Nguyen) - enforce Kconfig IOV/REALLOC dependency (Sascha El-Sharkawy) - avoid slot reset if bridge itself is broken (Jan Glauber) - clean up pci_reset_function() path (Jan H. Schönherr) - make pci_map_rom() fail if the option ROM is invalid (Changbin Du) - convert timers to timer_setup() (Kees Cook) - move PCI_QUIRKS to PCI bus Kconfig menu (Randy Dunlap) - constify pci_dev_type and intel_mid_pci_ops (Bhumika Goyal) - remove unnecessary pci_dev, pci_bus, resource, pcibios_set_master() declarations (Bjorn Helgaas) - fix endpoint framework overflows and BUG()s (Dan Carpenter) - fix endpoint framework issues (Kishon Vijay Abraham I) - avoid broken Cavium CN8xxx bus reset behavior (David Daney) - extend Cavium ACS capability quirks (Vadim Lomovtsev) - support Synopsys DesignWare RC in ECAM mode (Ard Biesheuvel) - turn off dra7xx clocks cleanly on shutdown (Keerthy) - fix Faraday probe error path (Wei Yongjun) - support HiSilicon STB SoC PCIe host controller (Jianguo Sun) - fix Hyper-V interrupt affinity issue (Dexuan Cui) - remove useless ACPI warning for Hyper-V pass-through devices (Vitaly Kuznetsov) - support multiple MSI on iProc (Sandor Bodo-Merle) - support Layerscape LS1012a and LS1046a PCIe host controllers (Hou Zhiqiang) - fix Layerscape default error response (Minghuan Lian) - support MSI on Tango host controller (Marc Gonzalez) - support Tegra186 PCIe host controller (Manikanta Maddireddy) - use generic accessors on Tegra when possible (Thierry Reding) - support V3 Semiconductor PCI host controller (Linus Walleij) * tag 'pci-v4.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (85 commits) PCI/ASPM: Add L1 Substates definitions PCI/ASPM: Reformat ASPM register definitions PCI/ASPM: Use correct capability pointer to program LTR_L1.2_THRESHOLD PCI/ASPM: Account for downstream device's Port Common_Mode_Restore_Time PCI: xgene: Rename xgene_pcie_probe_bridge() to xgene_pcie_probe() PCI: xilinx: Rename xilinx_pcie_link_is_up() to xilinx_pcie_link_up() PCI: altera: Rename altera_pcie_link_is_up() to altera_pcie_link_up() PCI: Fix kernel-doc build warning PCI: Fail pci_map_rom() if the option ROM is invalid PCI: Move pci_map_rom() error path PCI: Move PCI_QUIRKS to the PCI bus menu alpha/PCI: Make pdev_save_srm_config() static PCI: Remove unused declarations PCI: Remove redundant pci_dev, pci_bus, resource declarations PCI: Remove redundant pcibios_set_master() declarations PCI/PME: Handle invalid data when reading Root Status PCI: hv: Use effective affinity mask PCI: pciehp: Do not clear Presence Detect Changed during initialization PCI: pciehp: Fix race condition handling surprise link down PCI: Distribute available resources to hotplug-capable bridges ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdmaLinus Torvalds authored
Pull rdma updates from Doug Ledford: "This is a fairly plain pull request. Lots of driver updates across the stack, a huge number of static analysis cleanups including a close to 50 patch series from Bart Van Assche, and a number of new features inside the stack such as general CQ moderation support. Nothing really stands out, but there might be a few conflicts as you take things in. In particular, the cleanups touched some of the same lines as the new timer_setup changes. Everything in this pull request has been through 0day and at least two days of linux-next (since Stephen doesn't necessarily flag new errors/warnings until day2). A few more items (about 30 patches) from Intel and Mellanox showed up on the list on Tuesday. I've excluded those from this pull request, and I'm sure some of them qualify as fixes suitable to send any time, but I still have to review them fully. If they contain mostly fixes and little or no new development, then I will probably send them through by the end of the week just to get them out of the way. There was a break in my acceptance of patches which coincides with the computer problems I had, and then when I got things mostly back under control I had a backlog of patches to process, which I did mostly last Friday and Monday. So there is a larger number of patches processed in that timeframe than I was striving for. Summary: - Add iWARP support to qedr driver - Lots of misc fixes across subsystem - Multiple update series to hns roce driver - Multiple update series to hfi1 driver - Updates to vnic driver - Add kref to wait struct in cxgb4 driver - Updates to i40iw driver - Mellanox shared pull request - timer_setup changes - massive cleanup series from Bart Van Assche - Two series of SRP/SRPT changes from Bart Van Assche - Core updates from Mellanox - i40iw updates - IPoIB updates - mlx5 updates - mlx4 updates - hns updates - bnxt_re fixes - PCI write padding support - Sparse/Smatch/warning cleanups/fixes - CQ moderation support - SRQ support in vmw_pvrdma" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (296 commits) RDMA/core: Rename kernel modify_cq to better describe its usage IB/mlx5: Add CQ moderation capability to query_device IB/mlx4: Add CQ moderation capability to query_device IB/uverbs: Add CQ moderation capability to query_device IB/mlx5: Exposing modify CQ callback to uverbs layer IB/mlx4: Exposing modify CQ callback to uverbs layer IB/uverbs: Allow CQ moderation with modify CQ iw_cxgb4: atomically flush the qp iw_cxgb4: only call the cq comp_handler when the cq is armed iw_cxgb4: Fix possible circular dependency locking warning RDMA/bnxt_re: report vlan_id and sl in qp1 recv completion IB/core: Only maintain real QPs in the security lists IB/ocrdma_hw: remove unnecessary code in ocrdma_mbx_dealloc_lkey RDMA/core: Make function rdma_copy_addr return void RDMA/vmw_pvrdma: Add shared receive queue support RDMA/core: avoid uninitialized variable warning in create_udata RDMA/bnxt_re: synchronize poll_cq and req_notify_cq verbs RDMA/bnxt_re: Flush CQ notification Work Queue before destroying QP RDMA/bnxt_re: Set QP state in case of response completion errors RDMA/bnxt_re: Add memory barriers when processing CQ/EQ entries ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup updates from Tejun Heo: "Cgroup2 cpu controller support is finally merged. - Basic cpu statistics support to allow monitoring by default without the CPU controller enabled. - cgroup2 cpu controller support. - /sys/kernel/cgroup files to help dealing with new / optional features" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: export list of cgroups v2 features using sysfs cgroup: export list of delegatable control files using sysfs cgroup: mark @cgrp __maybe_unused in cpu_stat_show() MAINTAINERS: relocate cpuset.c cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat sched: Implement interface for cgroup unified hierarchy sched: Misc preps for cgroup unified hierarchy interface sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE cgroup: statically initialize init_css_set->dfl_cgrp cgroup: Implement cgroup2 basic CPU usage accounting cpuacct: Introduce cgroup_account_cputime[_field]() sched/cputime: Expose cputime_adjust()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpuLinus Torvalds authored
Pull percpu update from Tejun Heo: "Another minor pull request. It only contains one commit which can reclaim a bit of memory wasted during boot on UP" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: don't forget to free the temporary struct pcpu_alloc_info
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue updates from Tejun Heo: "There was a commit to make unbound kworkers respect cpu isolation but it conflicted with the restructuring of cpu isolation and got reverted, so the only thing left is the trivial comment fix. Will retry the cpu isolation change after this merge window" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Fix comment for unbound workqueue's attrbutes Revert "workqueue: respect isolated cpus when queueing an unbound work" workqueue: respect isolated cpus when queueing an unbound work
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata updates from Tejun Heo: "Nothing too interesting or alarming. Other than a new power saving mode addition to ahci and crash fix on a tracepoint, all changes are trivial or device-specific" * 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode. ata: sata_dwc_460ex: Propagate platform device ID to DMA driver ata: fixes kernel crash while tracing ata_eh_link_autopsy event ata: pata_pdc2027x: Fix space before '[' error. libata: fix spelling mistake: 'ambigious' -> 'ambiguous' ata: ceva: Add SMMU support for SATA IP ata: ceva: Correct the suspend and resume logic for SATA ata: ceva: Correct the AXI bus configuration for SATA ports ata: ceva: Add CCI support for SATA if CCI is enabled ata: ceva: Make RxWaterMark value as module parameter ata: ceva: Disable Device Sleep capability ata: ceva: Add gen 3 mode support in driver ata: ceva: Move sata port phy oob settings to device-tree devicetree: bindings: Add sata port phy config parameters in ahci-ceva ata: mark expected switch fall-throughs ata: sata_mv: remove a redundant assignment to pointer ehi ahci: Add support for Cavium's fifth generation SATA controller ata: sata_rcar: Use of_device_get_match_data() helper libata: make ata_port_type const libata: make static arrays const, reduces object code size ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linuxLinus Torvalds authored
Pull module updates from Jessica Yu: "Summary of modules changes for the 4.15 merge window: - treewide module_param_call() cleanup, fix up set/get function prototype mismatches, from Kees Cook - minor code cleanups" * tag 'modules-for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Do not paper over type mismatches in module_param_call() treewide: Fix function prototypes for module_param_call() module: Prepare to convert all module_param_call() prototypes kernel/module: Delete an error message for a failed memory allocation in add_module_usage()
-
git://git.linaro.org/landing-teams/working/fujitsu/integrationLinus Torvalds authored
Pull mailbox updates from Jassi Brar: "Change to POLL api and fixes for FlexRM and OMAP driver. Summary: - Core: Prefer ACK method over POLL, if both supported - Test: use flag instead of special character - FlexRM: Usual driver internal minor churn - Omap: fix error path" * tag 'mailbox-v4.15' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/omap: unregister mbox class mailbox: mailbox-test: don't rely on rx_buffer content to signal data ready mailbox: reset txdone_method TXDONE_BY_POLL if client knows_txdone mailbox: Build Broadcom FlexRM driver as loadable module for iProc SOCs mailbox: bcm-flexrm-mailbox: Use common GPL comment header mailbox: bcm-flexrm-mailbox: add depends on ARCH_BCM_IPROC mailbox: bcm-flexrm-mailbox: Print ring number in errors and warnings mailbox: bcm-flexrm-mailbox: Fix FlexRM ring flush sequence
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supplyLinus Torvalds authored
Pull power supply and reset updates from Sebastian Reichel: - misc minor fixes * tag 'for-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power: supply: cpcap-charger: fix incorrect return value check power: supply: replace pr_* with dev_* power: supply: pcf50633-charger: remove redundant variable charging_start power: supply: generic-adc-battery: remove redundant variable pdata power: supply: max8997: Improve a size determination in probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsiLinus Torvalds authored
Pull HSI updates from Sebastian Reichel: - add HSI OMAP4 bindings - misc small fixes * tag 'hsi-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: dt-bindings: hsi: add omap4 hsi controller bindings HSI: hsi_char: pr_err() strings should end with newlines HSI: omap_ssi_core: fix kilo to be "k" not "K"
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull SELinux updates from Paul Moore: "Seven SELinux patches for v4.15, although five of the seven are small build fixes and cleanups. Of the remaining two patches, the only one worth really calling out is Eric's fix for the SELinux filesystem xattr set/remove code; the other patch simply converts the SELinux hash table implementation to use kmem_cache. Eric's setxattr/removexattr tweak converts SELinux back to calling the commoncap implementations when the xattr is not SELinux related. The immediate win is to fixup filesystem capabilities in user namespaces, but it makes things a bit saner overall; more information in the commit description" * tag 'selinux-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: remove extraneous initialization of slots_used and max_chain_len selinux: remove redundant assignment to len selinux: remove redundant assignment to str selinux: fix build warning selinux: fix build warning by removing the unused sid variable selinux: Perform both commoncap and selinux xattr checks selinux: Use kmem_cache for hashtab_node
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/auditLinus Torvalds authored
Pull audit updates from Paul Moore: "Another relatively small pull request for audit, nine patches total. The only real new bit of functionality is the patch from Richard which adds the ability to filter records based on the filesystem type. The remainder are bug fixes and cleanups; the bug fix highlights include: - ensuring that we properly audit init/PID-1 (me) - allowing the audit daemon to shutdown the kernel/auditd connection cleanly by setting the audit PID to zero (Steve)" * tag 'audit-pr-20171113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: filter PATH records keyed on filesystem magic Audit: remove unused audit_log_secctx function audit: Allow auditd to set pid to 0 to end auditing audit: Add new syscalls to the perm=w filter audit: use audit_set_enabled() in audit_enable() audit: convert audit_ever_enabled to a boolean audit: don't use simple_strtol() anymore audit: initialize the audit subsystem as early as possible audit: ensure that 'audit=1' actually enables audit for PID 1
-
Jann Horn authored
This matters at least for the mincore syscall, which will otherwise copy uninitialized memory from the page allocator to userspace. It is probably also a correctness error for /proc/$pid/pagemap, but I haven't tested that. Removing the `walk->hugetlb_entry` condition in walk_hugetlb_range() has no effect because the caller already checks for that. This only reports holes in hugetlb ranges to callers who have specified a hugetlb_entry callback. This issue was found using an AFL-based fuzzer. v2: - don't crash on ->pte_hole==NULL (Andrew Morton) - add Cc stable (Andrew Morton) Fixes: 1e25a271 ("mincore: apply page table walker on do_mincore()") Signed-off-by:
Jann Horn <jannh@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds authored
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
-