- 23 Oct, 2018 40 commits
-
-
Sunil Goutham authored
This patch adds support for a RVU PF/VF to change NIX Rx flowkey algorithm index in NPC RX RSS_ACTION. eg: a ethtool command changing RSS algorithm for a netdev interface would trigger this change in NPC. If PF/VF doesn't specify any MCAM entry index then default UCAST entry of the NIXLF attached to PF/VF will be updated with RSS_ACTION and flowkey index. Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sunil Goutham authored
Configure NIX RX flowkey algorithm configuration to support RSS (receive side scaling). Currently support for only L3/L4 2-tuple and 4-tuple hash of IPv4/v6/TCP/UDP/SCTP is added. HW supports upto 32 different flowkey algorithms which SW can define, this patch defines 9. NPC RX ACTION has to point to one of these flowkey indices for RSS to work. The configuration is dependent on NPC parse result's layer info. So if NPC KPU profile changes suchthat LID/LTYPE values of above said protocols change then this configuration will most likely be effected. Signed-off-by:
-
Sunil Goutham authored
Upon NIXLF_ALLOC install a unicast forwarding rule in NPC MCAM like below - Match pkt DMAC with NIXLF attached PF/VF's MAC address. - Ingress channel - Action is UCAST - Forward to PF_FUNC of this NIXLF And broadcast pkt forwarding rule as - Match L2B bit in MCAM search key - Ingress channel - Action is UCAST, for now, later it will be changed to MCAST. Only PFs can install this rule Upon NIXLF_FREE disable all MCAM entries in use by that NIXLF. Signed-off-by:
-
Stanislaw Kardach authored
Add LMAC channel info like Rx/Tx channel base and count to NIXLF_ALLOC mailbox message response. This info is used by NIXLF attached RVU PF/VF to configure SQ's default channel, TL3_TL2_LINKX_CFG and to install MCAM rules in NPC based on matching ingress channel number. Signed-off-by:
Stanislaw Kardach <skardach@marvell.com> Signed-off-by:
Tomasz Duszynski <tduszynski@marvell.com> Signed-off-by:
-
Sunil Goutham authored
This patch adds some minimal configuration for NPC MCAM and LDATA extraction which is sufficient enough to install ucast/bcast/promiscuous forwarding rules. Below is the config done - LDATA extraction config to extract DMAC from pkt to offset 64bit in MCAM search key. - Set MCAM lookup keysize to 224bits - Set MCAM TX miss action to UCAST_DEFAULT - Set MCAM RX miss action to DROP Also inorder to have guaranteed space in MCAM to install ucast forwarding rule for each of RVU PF/VF, reserved one MCAM entry for each of NIXLF for ucast rule. And two entries for each of RVU PF. One for bcast pkt replication and other for promiscuous mode which allows all pkts received on a HW CGX/LBK channel. Signed-off-by:
-
Sunil Goutham authored
Config NPC layer info from KPU profile into protocol checker to identify outer L2/IPv4/TCP/UDP headers in a packet. And enable IPv4 checksum validation. L3/L4 and L4 CSUM validation will be enabled by PF/VF drivers by configuring NIX_AF_LF(0..127)_RX_CFG via mbox i.e 'nix_lf_alloc_req->rx_cfg' Also enable setting of NPC_RESULT_S[L2B] when an outer L2 broadcast address is detected. This will help in installing NPC MCAM rules for broadcast packets. Signed-off-by:
-
Vamsi Attunuru authored
Added support for PF/VF drivers to configure NIX to capture and/or strip VLAN tag from ingress packets. Signed-off-by:
Vamsi Attunuru <vamsi.attunuru@marvell.com> Signed-off-by:
-
Sunil Goutham authored
Upon NIXLF ALLOC/FREE, add or remove corresponding PF_FUNC from the broadcast packet replication list of the CGX LMAC mapped RVU PF. Signed-off-by:
-
Sunil Goutham authored
Allocate memory for mcast/bcast/mirror replication entry contexts, replication buffers (used by HW) and config HW with corresponding memory bases. Added support for installing MCEs via NIX AQ mbox. For now support is restricted to broadcast pkt replication, hence MCE table size and number of replication buffers allocated are less. Each CGX LMAC mapped RVU PF is assigned a MCE table of size 'num VFs of that PF + PF'. Signed-off-by:
-
Geetha sowjanya authored
For each CGX LMAC that is mapped to a RVU PF, allocate a pkind and config the same in CGX. For a received packet at CGX LMAC interface this pkind is used by NPC block to start parsing of packet. Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
-
Sunil Goutham authored
This patch configures all 16 KPUs and iKPU (pkinds) with the KPU parser profile defined in npc_profile.h. Each KPU engine has a 128 entry CAM, only CAM entries which are listed in the profile are enabled and rest are left disabled. Also - Memory is allocated for pkind's bitmap and PFFUNC, interface channel mapping. - Added all CSR offsets of NPC HW block. Signed-off-by:
-
Hao Zheng authored
NPC block is responsible for parsing and forwarding packets to different NIXLFs. NPC has 16 KPU engines (Kangaroo parse engine) and one iKPU which represents pkinds. Each physical port either CGX/LBK is assigned a pkind and upon receiving a packet HW takes that port's pkind and starts parsing as per the KPU engines config. This patch adds header files which contain configuration profile/array for each of the iKPU and 16 KPU engines. Signed-off-by:
Hao Zheng <hao.zheng@marvell.com> Signed-off-by:
-
Vamsi Attunuru authored
This patch adds a new mailbox message to reset a NIXLF's receive and transmit HW stats. Signed-off-by:
-
Sunil Goutham authored
This patch adds support for a PF/VF driver to configure NIX transmit scheduler queues via mbox. Since PF/VF doesn't know the absolute HW index of the NIXLF attached to it, AF traps the register config and overwrites with the correct NIXLF index. HW supports shaping, colouring and policing of packets with these multilevel traffic scheduler queues. Instead of introducing different mbox message formats for different configurations and making both AF & PF/VF driver implementation cumbersome, access to the scheduler queue's CSRs is provided via mbox. AF checks whether the sender PF/VF has the corresponding queue allocated or not and dumps the config to HW. With a single mbox msg 20 registers can be configured. Signed-off-by:
-
Sunil Goutham authored
Added support for a PF/VF to allocate or free NIX transmit scheduler queues via mbox. For setting up pkt transmission priorities between queues, the scheduler queues have to be contiguous w.r.t their HW indices. So both contiguous and non-contiguous allocations are supported. Upon receiving NIX_TXSCH_FREE mbox msg all scheduler queues allocated to sending PFFUNC (PF/VF) will be freed. Selective free is not supported. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
-
Eric Dumazet authored
syzkaller triggered a use-after-free [1], caused by a combination of skb_get() in llc_conn_state_process() and usage of sk_eat_skb() sk_eat_skb() is assuming the skb about to be freed is only used by the current thread. TCP/DCCP stacks enforce this because current thread holds the socket lock. llc_conn_state_process() wants to make sure skb does not disappear, and holds a reference on the skb it manipulates. But as soon as this skb is added to socket receive queue, another thread can consume it. This means that llc must use regular skb_unlink() and kfree_skb() so that both producer and consumer can safely work on the same skb. [1] BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:43 [inline] BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:967 [inline] BUG: KASAN: use-after-free in kfree_skb+0xb7/0x580 net/core/skbuff.c:655 Read of size 4 at addr ffff8801d1f6fba4 by task ksoftirqd/1/18 CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.19.0-rc8+ #295 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c4/0x2b6 lib/dump_stack.c:113 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline] refcount_read include/linux/refcount.h:43 [inline] skb_unref include/linux/skbuff.h:967 [inline] kfree_skb+0xb7/0x580 net/core/skbuff.c:655 llc_sap_state_process+0x9b/0x550 net/llc/llc_sap.c:224 llc_sap_rcv+0x156/0x1f0 net/llc/llc_sap.c:297 llc_sap_handler+0x65e/0xf80 net/llc/llc_sap.c:438 llc_rcv+0x79e/0xe20 net/llc/llc_input.c:208 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 process_backlog+0x218/0x6f0 net/core/dev.c:5829 napi_poll net/core/dev.c:6249 [inline] net_rx_action+0x7c5/0x1950 net/core/dev.c:6315 __do_softirq+0x30c/0xb03 kernel/softirq.c:292 run_ksoftirqd+0x94/0x100 kernel/softirq.c:653 smpboot_thread_fn+0x68b/0xa00 kernel/smpboot.c:164 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413 Allocated by task 18: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc_node+0x144/0x730 mm/slab.c:3644 __alloc_skb+0x119/0x770 net/core/skbuff.c:193 alloc_skb include/linux/skbuff.h:995 [inline] llc_alloc_frame+0xbc/0x370 net/llc/llc_sap.c:54 llc_station_ac_send_xid_r net/llc/llc_station.c:52 [inline] llc_station_rcv+0x1dc/0x1420 net/llc/llc_station.c:111 llc_rcv+0xc32/0xe20 net/llc/llc_input.c:220 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023 process_backlog+0x218/0x6f0 net/core/dev.c:5829 napi_poll net/core/dev.c:6249 [inline] net_rx_action+0x7c5/0x1950 net/core/dev.c:6315 __do_softirq+0x30c/0xb03 kernel/softirq.c:292 Freed by task 16383: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x83/0x290 mm/slab.c:3756 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642 sk_eat_skb include/net/sock.h:2366 [inline] llc_ui_recvmsg+0xec2/0x1610 net/llc/af_llc.c:882 sock_recvmsg_nosec net/socket.c:794 [inline] sock_recvmsg+0xd0/0x110 net/socket.c:801 ___sys_recvmsg+0x2b6/0x680 net/socket.c:2278 __sys_recvmmsg+0x303/0xb90 net/socket.c:2390 do_sys_recvmmsg+0x181/0x1a0 net/socket.c:2466 __do_sys_recvmmsg net/socket.c:2484 [inline] __se_sys_recvmmsg net/socket.c:2480 [inline] __x64_sys_recvmmsg+0xbe/0x150 net/socket.c:2480 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801d1f6fac0 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 228 bytes inside of 232-byte region [ffff8801d1f6fac0, ffff8801d1f6fba8) The buggy address belongs to the page: page:ffffea000747dbc0 count:1 mapcount:0 mapping:ffff8801d9be7680 index:0xffff8801d1f6fe80 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0007346e88 ffffea000705b108 ffff8801d9be7680 raw: ffff8801d1f6fe80 ffff8801d1f6f0c0 000000010000000b 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801d1f6fa80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff8801d1f6fb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8801d1f6fb80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ^ ffff8801d1f6fc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801d1f6fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Mathias Thore authored
Extract error information from rx and tx buffer descriptors, and update error counters. Signed-off-by:
Mathias Thore <mathias.thore@infinera.com> Signed-off-by:
-
Wolfram Sang authored
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Wolfram Sang authored
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Arthur Kiyanovski authored
linux/prefetch.h is never explicitly included in ena_com, although functions from it, such as prefetchw(), are used throughout ena_com. This is an inclusion bug, and we fix it here by explicitly including linux/prefetch.h. The bug was exposed when the driver was compiled for the xtensa architecture. Fixes: 689b2bda ("net: ena: add functions for handling Low Latency Queues in ena_com") Fixes: 8c590f97 ("ena: Fix Kconfig dependency on X86") Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Vito Caputo authored
Replace spurious spaces with a tab and remove superfluous tab from unix_sock struct. Signed-off-by:
Vito Caputo <vcaputo@pengaru.com> Signed-off-by:
-
Dan Carpenter authored
FDB_MAX_CHAIN is three. We wanted to allocate enough memory to hold four structs but there are missing parentheses so we only allocate enough memory for three structs and the first byte of the fourth one. Fixes: 328edb49 ("net/mlx5: Split FDB fast path prio to multiple namespaces") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
David S. Miller authored
Davide Caratti says: ==================== net/sched: forbid 'goto_chain' on fallback actions the following command: # tc actions add action police rate 1mbit burst 1k conform-exceed \ > pass / goto chain 42 generates a NULL pointer dereference when packets exceed the configured rate. Similarly, the following command: # tc actions add action pass random determ goto chain 42 2 makes the kernel crash with NULL dereference when the first packet does not match the 'pass' action. gact and police allow users to specify a fallback control action, that is stored in the action private data. 'goto chain x' never worked for these cases, since a->goto_chain handle was never initialized. There is only one goto_chain handle per TC action, and it is designed to be non-NULL only if tcf_action contains a 'goto chain' command. So, let's forbid 'goto chain' on fallback actions. Patch 1/4 and 2/4 change the .init() functions of police and gact, to let them return an error when users try to set 'goto chain x' in the fallback action. Patch 3/4 and 4/4 add TDC selftest coverage to this new behavior. ==================== Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Davide Caratti authored
add test to verify if act_police forbids 'goto chain' control actions for 'exceed' traffic. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
add test to verify if act_gact forbids 'goto chain' control actions on 'random' traffic in gact.json. Signed-off-by:
-
Davide Caratti authored
in the following command: # tc action add action police rate <r> burst <b> conform-exceed <c1>/<c2> 'goto chain x' is allowed only for c1: setting it for c2 makes the kernel crash with NULL pointer dereference, since TC core doesn't initialize the chain handle. Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Davide Caratti authored
in the following command: # tc action add action <c1> random <rand_type> <c2> <rand_param> 'goto chain x' is allowed only for c1: setting it for c2 makes the kernel crash with NULL pointer dereference, since TC core doesn't initialize the chain handle. Signed-off-by:
-
Andrew Lunn authored
When indicating the MAC supports Symmetric Pause, clear the Asymmetric Pause bit, which could of been already set is the PHY supports it. Reported-by:
Labbe Corentin <clabbe@baylibre.com> Fixes: c306ad36 ("net: ethernet: Add helper for MACs which support pause") Signed-off-by:
-
Olivier Brunel authored
Signed-off-by:
Olivier Brunel <jjk@jjacky.com> Signed-off-by:
-
Olivier Brunel authored
User mode helpers were spawned without a command line, and because an empty command line is used by many tools to identify processes as kernel threads, this could cause some issues. Notably during killing spree on shutdown, since such helper would then be skipped (i.e. not killed) which would result in the process remaining alive, and thus preventing unmouting of the rootfs (as experienced with the bpfilter umh). Fixes: 449325b5 ("umh: introduce fork_usermode_blob() helper") Signed-off-by:
-
Dan Carpenter authored
These functions are supposed to return one on failure and zero on success. Returning a zero here could cause uninitialized variable bugs in several of the callers. For example: drivers/scsi/cxgbi/cxgb4i/cxgb4i.c:1660 get_iscsi_dcb_priority() error: uninitialized symbol 'caps'. Fixes: 48365e48 ("qlcnic: dcb: Add support for CEE Netlink interface.") Signed-off-by: -
David S. Miller authored
David Ahern says: ==================== net: Add support for dumping addresses for a specific device Use the recently added kernel side filter infrastructure to add support for dumping addresses only for a specific device. Patch 1 creates an IPv4 version similar to IPv6's in6_dump_addrs function. Patch 2 simplifies in6_dump_addrs by moving index tracking of IP addresses from inet6_dump_addr to in6_dump_addrs. Patches 3 and 4 use the device-based address dump helpers to limit a dump to just the addresses on a specific device. ==================== Signed-off-by: -
David Ahern authored
If an RTM_GETADDR dump request has ifa_index set in the ifaddrmsg header, then return only the addresses for that device. Since inet6_dump_addr is reused for multicast and anycast addresses, this adds support for device specfic dumps of RTM_GETMULTICAST and RTM_GETANYCAST as well. Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
If an RTM_GETADDR dump request has ifa_index set in the ifaddrmsg header, then return only the addresses for that device. Signed-off-by:
-
David Ahern authored
ip_idx is always 0 going into in6_dump_addrs; it is passed as a pointer to save the last good index into cb. Since cb is already argument to in6_dump_addrs, just save the value there. Signed-off-by:
-
David Ahern authored
Similar to IPv6 move the logic that walks over the ipv4 address list for a device into a helper. Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Adds support of RAS Error Handling in HNS3 Driver This patch-set adds support related to RAS Error handling to the HNS3 Ethernet PF Driver. Set of errors occurred in the HNS3 hardware are reported to the driver through the PCIe AER interface. The received error information is then used to classify the received errors and then decide the appropriate receovery action depending on the type of error. ==================== Signed-off-by: -
Shiju Jose authored
This patch enables and process hw errors of TM scheduler and QCN(Quantized Congestion Control). Signed-off-by:
Shiju Jose <shiju.jose@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Shiju Jose authored
This patch enables and process hw errors from the PPP(Programmable Packet Process) block. Signed-off-by:
-
Shiju Jose authored
This patch adds enable and processing of hw errors from IGU(Ingress Unit), EGU(Egress Unit) and NCSI(Network Controller Sideband Interface). Signed-off-by:
-
