After commmit 692f66f2 ("crash: move crashkernel parsing and vmcore
related code under CONFIG_CRASH_CORE") the KEXEC_NOTE_BYTES macro is not
used anymore and for s390 we create the ELF header in the new kernel
anyway. Therefore remove the macro.
Reported-by: Xunlei Pang <xpang@redhat.com>
Reviewed-by: Mikhail Zaslonko <zaslonko@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

On some debug feature invocations the newline was missing.
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

The Prefix CCW is not mandatory and raw I/O can also be issued without
it. Check whether the Prefix CCW is supported and if not use the
combination of Define Extent and Locate Record Extended instead.

While at it, sort the variable declarations, replace the gotos with
early exits, and remove an error check at the end which is irrelevant.
Also, remove the XRC check as it is not relevant for raw I/O.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Rename dasd_raw_build_cp() to dasd_eckd_build_cp_raw() to fit the
scheme.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

We already have define_extent() that prepares necessary data for the
Define Extent CCW. The exact same thing is done in prefix_LRE().

Remove the duplicate code and move commands that were only used in
combination with the Prefix command to define_extent(). One of these
commands needs the blocksize to be specified. Add the blksize parameter
to define_extent() to account for that.

In addition, the check_XRC() function can be made more generic. Do this
and remove the Prefix-specific check_XRC_on_prefix() function.

Furthermore, prefix_LRE() uses fill_LRE_data() to prepare Locate Record
Extended data. Rename the function to fit the scheme better and make it
usable outside of the Prefix context by adding the corresponding CCW
command.
Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Pull ARM SoC 64-bit updates from Arnd Bergmann:
 "Changes to platform code for 64-bit ARM platforms.

  Andreas Färber adds two new platforms with initial code: Realtek
  RTD1295 and Action Semi S900. Both are fairly similar chips, used
  mainly in set-top-boxes, but with other possible applications, and
  additional members in the respective product families that could be
  added in the future. The code here is fairly minimal, as all the
  interesting parts are in device drivers and dts files.

  The Broadcom Vulcan platform gets dropped, as no products ever became
  available, and Cavium integrated the platform under a new name.

  Among some other defconfig changes, Timur Tabi enables a number of
  options that are typically required for server platforms"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: defconfig: remove duplicate entry
  arm64: defconfig: enable Qualcomm Technologies EMAC and some PHY drivers
  arm64: defconfig: enable QCOM_L2_PMU and QCOM_L3_PMU
  arm64: defconfig: enable EDAC options
  arm64: defconfig: enable APEI and GHES features
  arm64: defconfig: enable support for PCIe hotplug
  arm64: defconfig: enable EFI_CAPSULE_LOADER
  arm64: defconfig: enable BLK_DEV_NVME
  arm64: defconfig: enable ACPI_CPPC_CPUFREQ
  arm64: marvell: enable ICU and GICP drivers
  arm64: marvell: enable the Armada 7K/8K pinctrl driver
  arm64: Prepare Actions Semi S900
  ARM64: defconfig: enable meson SPICC as module
  ARM64: defconfig: enable IR core, decoders and Meson IR device
  arm64: defconfig: enable Simple Sound Card support
  arm64: defconfig: Enable ARCH_BRCMSTB
  arm64: defconfig: drop ARCH_VULCAN
  arm64: disable Broadcom Vulcan platform
  MAINTAINERS: Add Realtek section
  ARM64: Prepare Realtek RTD1295

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "Device-tree updates for arm64 platforms. For the first time I can
  remember, this is actually larger than the corresponding branch for
  32-bit platforms overall, though that has more individual changes.

  A significant portion this time is due to added machine support:

   - Initial support for the Realtek RTD1295 SoC, along with the Zidoo
     X9S set-top-box

   - Initial support for Actions Semi S900 and the Bubblegum-96
     single-board-cёmputer.

   - Rockchips support for the rk3399-Firefly single-board-computer gets
     added, this one stands out for being relatively fast, affordable
     and well₋supported, compared to many boards that only fall into one
     or two of the above categories.

   - Mediatek gains support for the mt6797 mobile-phone SoC platform and
     corresponding evaluation board.

   - Amlogic board support gets added for the NanoPi K2 and S905x
     LibreTech CC single-board computers and the R-Box Pro set-top-box

   - Allwinner board support gets added for the OrangePi Win, Orangepi
     Zero Plus 2, NanoPi NEO2 and Orange Pi Prime single board computers
     and the SoPine system-on-module.

   - Renesas board support for Salvator-XS and H3ULCB automotive
     development systems.

   - Socionext Uniphier board support for LD11-global and LD20-global,
     whatever those may be.

   - Broadcom adds support for the new Stingray communication processor
     in its iProc family, along with two reference boards.

  Other updates include:

   - For the hisicon platform, support for Hi3660-Hikey960 gets extended
     significantly.

   - Lots of smaller updates for Renesas, Amlogic, Rockchip, UniPhier,
     Broadcom, Allwinner, Hisilicon, Qualcomm, Marvell, and NXP"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (243 commits)
  ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
  Revert "arm64: dts: marvell: add dma-mask in crypto nodes for 7k/8k"
  arm64: dts: mediatek: don't include missing file
  ARM64: dts: meson-gxl: Add Libre Technology CC support
  dt-bindings: arm: amlogic: Add Libre Technology CC board
  dt-bindings: add Libre Technology vendor prefix
  arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K
  arm64: dts: zte: Use - instead of @ for DT OPP entries
  arm64: dts: marvell: add gpio support for Armada 7K/8K
  arm64: dts: marvell: add pinctrl support for Armada 7K/8K
  arm64: dts: marvell: use new binding for the system controller on cp110
  arm64: dts: marvell: remove *-clock-output-names on cp110
  arm64: dts: marvell: use new bindings for xor clocks on ap806
  arm64: dts: marvell: mcbin: enable the mdio node
  arm64: dts: Add Actions Semi S900 and Bubblegum-96
  dt-bindings: Add vendor prefix for uCRobotics
  arm64: dts: marvell: add xmdio nodes for 7k/8k
  arm64: dts: marvell: add a comment on the cp110 slave node status
  arm64: dts: marvell: remove cpm crypto nodes from dts files
  arm64: dts: marvell: cp110: enable the crypto engine at the SoC level
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "The main changes this time are from a cleanup series that Krzysztof
  Kozłowski did, looking for config options in the defconfig files that
  got removed or renamed. He tracked them down to make sure we don't
  lose information unintentionally after an update.

  Aside from that, there is the usual driver enablement, this time for
  davinci, samsung, stm32, bcm2835, qualcomm, at91, imx, mvebu, and
  omap"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  multi_v7_defconfig: Enable OMAP MTD and DM816 AHCI
  ARM: qcom_defconfig: enable RPMSG_QCOM_SMD
  ARM: imx_v6_v7_defconfig: Select CONFIG_IMX7D_ADC
  ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig
  ARM: davinci_all_defconfig: enable USB CDC NCM gadget
  ARM: davinci_all_defconfig: enable mtdtests
  ARM: imx_v6_v7_defconfig: Set THERMAL_WRITABLE_TRIPS=y for testing
  ARM: bcm2835_defconfig: Enable serial & ethernet USB gadget support
  ARM: tct_hammer_defconfig: Save defconfig
  ARM: s5pv210_defconfig: Save defconfig
  ARM: s3c6400_defconfig: Save defconfig
  ARM: mini2440_defconfig: Save defconfig
  ARM: s3c2410_defconfig: Save defconfig
  ARM: exynos_defconfig: Save defconfig
  ARM: s5pv210_defconfig: Bring back lost (but wanted) options
  ARM: s3c6400_defconfig: Bring back lost (but wanted) options
  ARM: s3c2410_defconfig: Bring back lost (but wanted) options
  ARM: tct_hammer_defconfig: Bring back lost (but wanted) options
  ARM: mini2440_defconfig: Bring back lost (but wanted) options
  ARM: defconfig: samsung: Re-order entries to match savedefconfig
  ...

Pull ARM device-tree updates from Arnd Bergmann:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  New machines:

   - The new Action Semi S500 platform is added along with initial
     support for the LeMaker Guitar board.

   - STM32 gains support for three new boards: stm32h743-disco,
     stm32f746-disco, and stm32f769-disco, along with new device support
     for the existing stm32f429 boards.

   - Renesas adds two new boards, the tiny GR-Peach based on RZ/A1H with
     10MB on-chip SRAM, and the iWave G20D-Q7 System-on-Module plus
     board.

   - On Marvell "mvebu", we gain support for the Linksys WRT3200ACM
     wireless router.

   - For NXP i.MX, we gain support for the Gateworks Ventana GW5600 and
     the Technexion Pico i.MX7D single-board computers.

   - The BeagleBone Blue is added for OMAP, it's the latest variation of
     the popular Beaglebone Black single-board computer.

   - The Allwinner based Lichee Pi Zero and NanoPi M1 Plus boards are
     added, these are the latest variations of a seemingly endless
     supply of similar single-board computers.

  Other updates:

   - Linus Walleij improves support for the "Faraday" based SoC
     platforms from various SoC makers (Moxart, Aspeed, Gemini)

   - The ARM Mali GPU is now describe on Rockchips SoCs

   - Mediatek MT7623 is extended significantly, making it much more
     useful.

   - Lots of individual updates on Renesas, OMAP, Rockchips, Broadcom,
     Allwinner, Qualcomm, iMX

   - For Amlogic, the clock support is extended a lot on meson8b.

   - We now build the devicetree file for the Raspberry Pi 3 on 32-bit
     ARM, in addition to the existing ARM64 support, to help users
     wanting to run a 32-bit system on it"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (345 commits)
  ARM: dts: socfpga: set the i2c frequency
  ARM: dts: socfpga: Add second ethernet alias to VINING FPGA
  ARM: dts: socfpga: Drop LED node from VINING FPGA
  ARM: dts: socfpga: Remove I2C EEPROMs from VINING FPGA
  ARM: dts: socfpga: Enable QSPI support on VINING FPGA
  ARM: dts: socfpga: Fix the ethernet clock phandle
  ARM: pxa: Use - instead of @ for DT OPP entries
  ARM: dts: owl-s500: Add SPS node
  ARM: dts: owl-s500: Set CPU enable-method
  dt-bindings: arm: cpus: Add S500 enable-method
  ARM: dts: Add Actions Semi S500 and LeMaker Guitar
  dt-bindings: arm: Document Actions Semi S900
  dt-bindings: timer: Document Owl timer
  ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
  dt-bindings: arm: Document Actions Semi S500
  dt-bindings: Add vendor prefix for Actions Semi
  ARM: dts: turris-omnia: Add generic compatible string for I2C EEPROM
  ARM: dts: mvebu: add support for Linksys WRT3200ACM (Rango)
  ARM: dts: armada-385-linksys: fixup button node names
  ARM: dts: armada-385-linksys: group pins in pinctrl
  ...

Pull ARM SoC platform updates from Arnd Bergmann:
 "SoC platform changes (arch/arm/mach-*). This merge window, the bulk is
  for a few platforms:

   - Andres Färber adds initial support for the Actions Semi S500 (aka
     'owl') platform, a close relative of the S900 platform he adds for
     arm64.

   - in mach-omap2, we remove more legacy code

   - Rockchips gains support for the RV1108 SoC designed for camera
     applications.

   - For Atmel, we gain support for MMU-less SoCs (SAME70/V71/S70/V70)

   - Minor updates for other platforms, including davinci, s3c64xx,
     prima2, stm32, broadcom nsp, amlogic, pxa, imx and renesas"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (74 commits)
  ARM: owl: smp: Drop bogus holding pen
  ARM: owl: Drop custom machine
  ARM: owl: smp: Implement SPS power-gating for CPU2 and CPU3
  soc: actions: owl-sps: Factor out owl_sps_set_pg() for power-gating
  soc: actions: Add Owl SPS
  dt-bindings: power: Add Owl SPS power domains
  MAINTAINERS: Update Actions Semi section with SPS
  ARM: owl: Implement CPU enable-method for S500
  MAINTAINERS: Add Actions Semi Owl section
  ARM: Prepare Actions Semi S500
  ARM: socfpga: Increase max number of GPIOs
  ARM: stm32: Introduce MACH_STM32F469 flag
  ARM: prima2: remove redundant select CPU_V7
  ARM: davinci: fix const warnings
  ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ALWAYS_ON
  ARM: OMAP4: hwmod_data: add SHAM crypto accelerator
  ARM: OMAP4: hwmod data: add des
  ARM: OMAP4: hwmod data: add aes2
  ARM: OMAP4: hwmod data: add aes1
  ARM: pxa: Delete an error message for a failed memory allocation in pxa3xx_u2d_probe()
  ...

Pull non-urgent ARM SoC fixes from Arnd Bergmann:
 "Smaller patches that didn't seem to find a home in other branches, and
  low-priority fixes from late in the merge window.

   - Lee Jones retires as bcm2835 (raspberry pi) co-maintainer.

   - a couple of bugfixes for the ARM CCN bus driver that were regarded
     not important enough

   - minor device tree fixes for the Renesas and Marvell platforms, that
     came a little late or did not justify have another pull request
     after the last -rc"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  bus: arm-ccn: Enable stats for CCN-502 interconnect
  dt-bindings: arm-ccn: Add bindings info for CCN-502 compatible string
  bus: arm-ccn: Use devm_kcalloc() in arm_ccn_probe()
  bus: arm-ccn: Fix module autoload
  MAINTAINERS: add RV1108 Rockchip soc to maintained files
  ARM: dts: kirkwood: Fix Openblock A6 nand partition overlap
  ARM: dts: armadillo800eva: Split LCD mux and gpio
  MAINTAINERS: Remove Lee Jones from bcm2835.

Pull HSI updates from Sebastian Reichel:
 "Misc cleanups"

* tag 'hsi-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: core: Use kcalloc() in two functions
  HSI: Use kcalloc() in hsi_register_board_info()
  HSI: omap_ssi: Delete an error message for a failed memory allocation in ssi_add_controller()
  HSI: omap_ssi: Fix a typo in a comment line
  HSI: omap_ssi: Use devm_kcalloc() in ssi_add_controller()
  HSI: nokia-modem: Add a space character for better code readability in nokia_modem_probe()
  HSI: nokia-modem: Delete error messages for a failed memory allocation in two functions
  HSI: nokia-modem: Use devm_kcalloc() in nokia_modem_gpio_probe()

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - Linear ltc3651 charger driver
   - Motorola CPCAP battery fuel-gauge driver

  New chip/feature support:
   - bq27xxx: prepare for chip data setup
   - axp20x_battery: support max charge current setup

  New core features:
   - add Apple Brick ID type
   - support "supplied-from" device property for generic ACPI/pdata support
   - support strings for sysfs properties representing enums
   - introduce battery-info (backend is DT only for now)
   - provide reboot-mode header globally

  .. and misc fixes"

* tag 'for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: sbs-battery: Don't needlessly set CAPACITY_MODE
  power: supply: sbs-battery: Prevent CAPACITY_MODE races
  power: supply: bq24735: remove incorrect le16_to_cpu calls
  power: supply: sbs-battery: remove incorrect le16_to_cpu calls
  power: supply: cpcap-charger: Add missing power_supply_config
  power: supply: twl4030-charger: move allocation of iio channel to the beginning
  power: supply: twl4030-charger: allocate iio by devm_iio_channel_get() and fix error path
  power: supply: core: constify psy_tcd_ops.
  dt-bindings: power: supply: cpcap-battery: Add power-supplies property
  dt-bindings: power: supply: move max8903-charger.txt to proper location
  dt-bindings: power: supply: move maxim,max14656.txt to proper location
  power: supply: twl4030_charger: Use sysfs_match_string() helper
  power: reset: reboot-mode: Make include file global
  power: supply: axp20x_battery: add DT support for battery max constant charge current
  power: supply: axp20x_battery: add support for DT battery
  power: supply: bq27xxx: Add power_supply_battery_info support
  power: supply: bq27xxx: Add chip data memory read/write support
  power: supply: bq27xxx: Add bulk transfer bus methods
  dt-bindings: power: supply: bq27xxx: Add monitored-battery documentation
  power: supply: core: Add power_supply_prop_precharge
  ...

Pull ACPI updates from Rafael Wysocki:
 "These mostly update the ACPICA code in the kernel to upstream revision
  20170531 which covers all of the new material from ACPI 6.2, including
  new tables (WSMT, HMAT, PPTT), new subtables and definition changes
  for some existing tables (BGRT, HEST, SRAT, TPM2, PCCT), new resource
  descriptor macros for pin control, support for new predefined methods
  (_LSI, _LSR, _LSW, _HMA), fixes and cleanups.

  On top of that, an additional ACPICA change from Kees (which also is
  upstream already) switches all of the definitions of function pointer
  structures in ACPICA to use designated initializers so as to make the
  structure layout randomization GCC plugin work with it.

  The rest is a few fixes and cleanups in the EC driver, an xpower PMIC
  driver update, a new backlight blacklist entry, and update of the
  tables configfs interface and a messages formatting cleanup.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision revision
     20170531 (which covers all of the new material from ACPI 6.2)
     including:
      * Support for the PinFunction(), PinConfig(), PinGroup(),
        PinGroupFunction(), and PinGroupConfig() resource descriptors
        (Mika Westerberg).
      * Support for new subtables in HEST and SRAT, new notify value for
        HEST, header support for TPM2 table changes, and BGRT Status
        field update (Bob Moore).
      * Support for new PCCT subtables (David Box).
      * Support for _LSI, _LSR, _LSW, and _HMA as predefined methods
        (Erik Schmauss).
      * Support for the new WSMT, HMAT, and PPTT tables (Lv Zheng).
      * New UUID values for Processor Properties (Bob Moore).
      * New notify values for memory attributes and graceful shutdown
        (Bob Moore).
      * Fix related to the PCAT_COMPAT MADT flag (Janosch Hildebrand).
      * Resource to AML conversion fix for resources containing GPIOs
        (Mika Westerberg).
      * Disassembler-related updates (Bob Moore, David Box, Erik
        Schmauss).
      * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Lv Zheng,
        Cao Jin).

   - Modify ACPICA to always use designated initializers for function
     pointer structures to make the structure layout randomization GCC
     plugin work with it (Kees Cook).

   - Update the tables configfs interface to unload SSDTs on configfs
     entry removal (Jan Kiszka).

   - Add support for the GPI1 regulator to the xpower PMIC Operation
     Region handler (Hans de Goede).

   - Fix ACPI EC issues related to conflicting EC definitions in the
     ECDT and in the ACPI namespace (Lv Zheng, Carlo Caione, Chris
     Chiu).

   - Fix an interrupt storm issue in the EC driver and make its debug
     output work with dynamic debug as expected (Lv Zheng).

   - Add ACPI backlight quirk for Dell Precision 7510 (Shih-Yuan Lee).

   - Fix whitespace in pr_fmt() to align log entries properly in some
     places in the ACPI subsystem (Vincent Legoll)"

* tag 'acpi-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (63 commits)
  ACPI / EC: Add quirk for GL720VMK
  ACPI / EC: Fix media keys not working problem on some Asus laptops
  ACPI / EC: Add support to skip boot stage DSDT probe
  ACPI / EC: Enhance boot EC sanity check
  ACPI / video: Add quirks for the Dell Precision 7510
  ACPI: EC: Fix EC command visibility for dynamic debug
  ACPI: EC: Fix an EC event IRQ storming issue
  ACPICA: Use designated initializers
  ACPICA: Update version to 20170531
  ACPICA: Update a couple of debug output messages
  ACPICA: acpiexec: enhance local signal handler
  ACPICA: Simplify output for the ACPI Debug Object
  ACPICA: Unix application OSL: Correctly handle control-c (EINTR)
  ACPICA: Improvements for debug output only
  ACPICA: Disassembler: allow conflicting external declarations to be emitted.
  ACPICA: Disassembler: add external op to namespace on first pass
  ACPICA: Disassembler: prevent external op's from opening a new scope
  ACPICA: Changed Gbl_disasm_flag to acpi_gbl_disasm_flag
  ACPICA: Changing External to a named object
  ACPICA: Update two error messages to emit control method name
  ...

Pull power management updates from Rafael Wysocki:
 "The big ticket items here are the rework of suspend-to-idle in order
  to add proper support for power button wakeup from it on recent Dell
  laptops and the rework of interfaces exporting the current CPU
  frequency on x86.

  In addition to that, support for a few new pieces of hardware is
  added, the PCI/ACPI device wakeup infrastructure is simplified
  significantly and the wakeup IRQ framework is fixed to unbreak the IRQ
  bus locking infrastructure.

  Also, there are some functional improvements for intel_pstate, tools
  updates and small fixes and cleanups all over.

  Specifics:

   - Rework suspend-to-idle to allow it to take wakeup events signaled
     by the EC into account on ACPI-based platforms in order to properly
     support power button wakeup from suspend-to-idle on recent Dell
     laptops (Rafael Wysocki).

     That includes the core suspend-to-idle code rework, support for the
     Low Power S0 _DSM interface, and support for the ACPI INT0002
     Virtual GPIO device from Hans de Goede (required for USB keyboard
     wakeup from suspend-to-idle to work on some machines).

   - Stop trying to export the current CPU frequency via /proc/cpuinfo
     on x86 as that is inaccurate and confusing (Len Brown).

   - Rework the way in which the current CPU frequency is exported by
     the kernel (over the cpufreq sysfs interface) on x86 systems with
     the APERF and MPERF registers by always using values read from
     these registers, when available, to compute the current frequency
     regardless of which cpufreq driver is in use (Len Brown).

   - Rework the PCI/ACPI device wakeup infrastructure to remove the
     questionable and artificial distinction between "devices that can
     wake up the system from sleep states" and "devices that can
     generate wakeup signals in the working state" from it, which allows
     the code to be simplified quite a bit (Rafael Wysocki).

   - Fix the wakeup IRQ framework by making it use SRCU instead of RCU
     which doesn't allow sleeping in the read-side critical sections,
     but which in turn is expected to be allowed by the IRQ bus locking
     infrastructure (Thomas Gleixner).

   - Modify some computations in the intel_pstate driver to avoid
     rounding errors resulting from them (Srinivas Pandruvada).

   - Reduce the overhead of the intel_pstate driver in the HWP
     (hardware-managed P-states) mode and when the "performance" P-state
     selection algorithm is in use by making it avoid registering
     scheduler callbacks in those cases (Len Brown).

   - Rework the energy_performance_preference sysfs knob in intel_pstate
     by changing the values that correspond to different symbolic hint
     names used by it (Len Brown).

   - Make it possible to use more than one cpuidle driver at the same
     time on ARM (Daniel Lezcano).

   - Make it possible to prevent the cpuidle menu governor from using
     the 0 state by disabling it via sysfs (Nicholas Piggin).

   - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on
     AMD systems (Yazen Ghannam).

   - Make the CPPC cpufreq driver take the lowest nonlinear performance
     information into account (Prashanth Prakash).

   - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q
     driver and clean up the sfi, exynos5440 and intel_pstate drivers
     (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael
     Wysocki, Tao Wang).

   - Fix a few minor issues in the generic power domains (genpd)
     framework and clean it up somewhat (Krzysztof Kozlowski, Mikko
     Perttunen, Viresh Kumar).

   - Fix a couple of minor issues in the operating performance points
     (OPP) framework and clean it up somewhat (Viresh Kumar).

   - Fix a CONFIG dependency in the hibernation core and clean it up
     slightly (Balbir Singh, Arvind Yadav, BaoJun Luo).

   - Add rk3228 support to the rockchip-io adaptive voltage scaling
     (AVS) driver (David Wu).

   - Fix an incorrect bit shift operation in the RAPL power capping
     driver (Adam Lessnau).

   - Add support for the EPP field in the HWP (hardware managed
     P-states) control register, HWP.EPP, to the x86_energy_perf_policy
     tool and update msr-index.h with HWP.EPP values (Len Brown).

   - Fix some minor issues in the turbostat tool (Len Brown).

   - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a
     minor issue in it (Sherry Hurwitz).

   - Assorted cleanups, mostly related to the constification of some
     data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof
     Kozlowski)"

* tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits)
  cpufreq: Update scaling_cur_freq documentation
  cpufreq: intel_pstate: Clean up after performance governor changes
  PM: hibernate: constify attribute_group structures.
  cpuidle: menu: allow state 0 to be disabled
  intel_idle: Use more common logging style
  PM / Domains: Fix missing default_power_down_ok comment
  PM / Domains: Fix unsafe iteration over modified list of domains
  PM / Domains: Fix unsafe iteration over modified list of domain providers
  PM / Domains: Fix unsafe iteration over modified list of device links
  PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device
  PM / Domains: Call driver's noirq callbacks
  PM / core: Drop run_wake flag from struct dev_pm_info
  PCI / PM: Simplify device wakeup settings code
  PCI / PM: Drop pme_interrupt flag from struct pci_dev
  ACPI / PM: Consolidate device wakeup settings code
  ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags
  PM / QoS: constify *_attribute_group.
  PM / AVS: rockchip-io: add io selectors and supplies for rk3228
  powercap/RAPL: prevent overridding bits outside of the mask
  PM / sysfs: Constify attribute groups
  ...

Pull spi updates from Mark Brown:
 "There's only one big change in this release but it's a very big
  change: Geert Uytterhoeven has implemented support for SPI slave mode.

  This feature has been on the cards since the subsystem was originally
  merged back in the mists of time so it's great that Geert stepped up
  and finally implemented it.

   - SPI slave support, together with wholesale renaming of SPI
     controllers from master to controller which went surprisingly
     smoothly. This is already used with Renesas SoCs and support is in
     the works for i.MX too.

   - New drivers for Meson SPICC and ST STM32"

* tag 'spi-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (57 commits)
  spi: loopback-test: Fix kfree() NULL pointer error.
  spi: loopback-test: fix spelling mistake: "reruning" -> "rerunning"
  spi: sirf: fix spelling mistake: "registerred" -> "registered"
  spi: stm32: fix potential dereference null return value
  spi: stm32: enhance DMA error management
  spi: stm32: add runtime PM support
  spi: stm32: use normal conditional statements instead of ternary operator
  spi: stm32: replace st, spi-midi with st, spi-midi-ns to fit bindings
  spi: stm32: fix example with st, spi-midi-ns property
  spi: stm32: fix compatible to fit with new bindings
  spi: stm32: use SoC specific compatible
  spi: rockchip: Disable Runtime PM when chip select is asserted
  spi: rockchip: Set GPIO_SS flag to enable Slave Select with GPIO CS
  spi: atmel: fix corrupted data issue on SAM9 family SoCs
  spi: stm32: fix error check on mbr being -ve
  spi: add driver for STM32 SPI controller
  spi: Document the STM32 SPI bindings
  spi/bcm63xx: Fix checkpatch warnings
  spi: imx: Check for allocation failure earlier
  spi: mediatek: add spi support for mt2712 IC
  ...

Pull regulator updates from Mark Brown:
 "A quiet release for the regulator API, a series of fairly small fixes
  plus one new feature and a few new drivers:

   - Support for regulators with different settling times for rising and
     falling voltage changes.

   - New drivers for Allwinner AXP803, HiSilicon HI6421V530 and TI
     LP87565"

* tag 'regulator-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (21 commits)
  regulator: core: Fix size limit of supply_map
  regulator: core: Fix voltage change propagations to supply regulators
  regulator: lp87565: Fix the initial voltage range
  regulator: tps65910: wire up sleep control configuration
  regulator: hi6421v530: Describe consumed platform device
  regulator: tps65910: check TPS65910_NUM_REGS at build time
  regulator: core: Prioritise consumer mappings over regulator name
  regulator: lp87565: Fix the GPL header
  regulator: hi6421: Describe consumed platform device
  regulator: hi6421v530: add driver for hi6421v530 voltage regulator
  regulator: da9061: BUCK and LDO regulator driver
  regulator: bd9571mwv: Statize local symbols
  regulator: tps65917: Add support for SMPS12
  regulator: lp87565: Add support for lp87565 PMIC regulators
  regulator: axp20x-regulator: add support for AXP803
  regulator: lp8755: fix spelling mistake "acceess" -> "access"
  regulator: Allow for asymmetric settling times
  regulator: DT: Add properties for asymmetric settling times
  regulator: palmas: Drop unnecessary static
  MAINTAINERS: Update MAX77802 PMIC entry
  ...

Pull regmap updates from Mark Brown:
 "The usual small smattering of activity for regmap this time round:

   - Addition of support for the 1-Wire bus standard.

   - Options that allow support for more interrupt controllers with
     regmap-irq.

   - Only build LZO cache support if it's actually being used"

* tag 'regmap-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: irq: add chip option mask_writeonly
  regmap: irq: allow to register one cell interrupt controllers
  regmap: Fix typo in IS_ENABLED() check
  regmap: Add 1-Wire bus support
  regmap: make LZO cache optional

Merge tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - Add PMBus client driver for IR35221

 - Add support for NCT6795D to nct6775 driver

 - Functional improvements to adt7475, aspeed-pwm-tacho, and ibmpowernv
   drivers

 - Minor fixes and cleanups in various drivers

* tag 'hwmon-for-linus-v4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (22 commits)
  hwmon: (aspeed-pwm-tacho) Poll with short sleeps.
  hwmon: (aspeed-pwm-tacho) reduce fan_tach period
  hwmon: (ibmpowernv) Add current(A) sensor
  hwmon: (ibmpowernv) introduce a legacy_compatibles array
  hwmon: (pwm-fan) Switch to new atomic PWM API
  hwmon: (scpi) Fix the scale of SCP sensor readings
  hwmon: (aspeed-pwm-tacho) Enable both edge measurement.
  hwmon: (ibmpowernv) Add highest/lowest attributes to sensors
  hwmon: (pmbus) move header file out of I2C realm
  hwmon: (max6639) move header file out of I2C realm
  hwmon: (ltc4245) move header file out of I2C realm
  hwmon: (ds620) move header file out of I2C realm
  hwmon: (ads1015) move header file out of I2C realm
  hwmon: (adt7475) temperature smoothing
  hwmon: (adt7475) add high frequency support
  hwmon: (adt7475) fan stall prevention
  hwmon: (adt7475) replace find_nearest() with find_closest()
  hwmon: (pmbus) Add client driver for IR35221
  hwmon: (nct6775) Add support for NCT6795D
  hwmon: (nct6775) Improve fan detection
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Add support to enable irq wake for slot gpio
   - Remove MMC_CAP2_HC_ERASE_SZ and make it the default behaviour
   - Improve R1 response error checks for stop commands
   - Cleanup and clarify some MMC specific code
   - Keep card runtime resumed while adding SDIO function devices
   - Use device_property_read instead of of_property_read in mmc_of_parse()
   - Move boot partition locking into a driver op to enable proper I/O scheduling
   - Move multi/single-ioctl() to use block layer to enable proper I/O scheduling
   - Delete bounce buffer Kconfig option
   - Improve the eMMC HW reset support provided via the eMMC pwrseq
   - Add host API to manage SDIO IRQs from a workqueue

  MMC host:
   - dw_mmc: Drop support for multiple slots
   - dw_mmc: Use device_property_read instead of of_property_read
   - dw_mmc-rockchip: Optional improved tuning to greatly decrease tuning time
   - dw_mmc: Prevent rpm suspend for SDIO IRQs instead of always for SDIO cards
   - dw_mmc: Convert to use MMC_CAP2_SDIO_IRQ_NOTHREAD for SDIO IRQs
   - omap_hsmmc: Convert to mmc regulator APIs to consolidate code
   - omap_hsmmc: Deprecate "vmmc_aux" in DT and use "vqmmc" instead
   - tmio: make sure SDIO gets reinitialized after resume
   - sdhi: add CMD23 support to R-Car Gen2 & Gen3
   - tmio: add CMD23 support
   - sdhi/tmio: Refactor code and rename files to simplify Kconfig options
   - sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
   - sdhci-pci: Add support for Intel CNP
   - sdhci-esdhc-imx: Remove ENGcm07207 workaround - allow multi block transfers
   - sdhci-esdhc-imx: Allow all supported prescaler values
   - sdhci-esdhc-imx: Fix DAT line software reset
   - sdhci-esdhc: Add SDHCI_QUIRK_32BIT_DMA_ADDR
   - atmel-mci: Drop AVR32 support"

* tag 'mmc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits)
  mmc: dw_mmc: remove the unnecessary slot variable
  mmc: dw_mmc: use the 'slot' instead of 'cur_slot'
  mmc: dw_mmc: remove the 'id' arguments about functions relevant to slot
  mmc: dw_mmc: change the array of slots
  mmc: dw_mmc: remove the loop about finding slots
  mmc: dw_mmc: deprecated the "num-slots" property
  mmc: dw_mmc-rockchip: parse rockchip, desired-num-phases from DT
  dt-bindings: rockchip-dw-mshc: add optional rockchip, desired-num-phases
  mmc: renesas-sdhi: improve checkpatch cleanness
  mmc: tmio: improve checkpatch cleanness
  mmc: sdhci-pci: Enable card detect wake for Intel BYT-related SD controllers
  mmc: slot-gpio: Add support to enable irq wake on cd_irq
  mmc: core: Remove MMC_CAP2_HC_ERASE_SZ
  mmc: core: for data errors, take response of stop cmd into account
  mmc: core: check also R1 response for stop commands
  mmc: core: Clarify code for sending CSD
  mmc: core: Drop mmc_all_send_cid() and use mmc_send_cxd_native() instead
  mmc: core: Re-factor code for sending CID
  mmc: core: Remove redundant code in mmc_send_cid()
  mmc: core: Make mmc_can_reset() static
  ...

Pull documentation updates from Jonathan Corbet:
 "There has been a fair amount of activity in the docs tree this time
  around. Highlights include:

   - Conversion of a bunch of security documentation into RST

   - The conversion of the remaining DocBook templates by The Amazing
     Mauro Machine. We can now drop the entire DocBook build chain.

   - The usual collection of fixes and minor updates"

* tag 'docs-4.13' of git://git.lwn.net/linux: (90 commits)
  scripts/kernel-doc: handle DECLARE_HASHTABLE
  Documentation: atomic_ops.txt is core-api/atomic_ops.rst
  Docs: clean up some DocBook loose ends
  Make the main documentation title less Geocities
  Docs: Use kernel-figure in vidioc-g-selection.rst
  Docs: fix table problems in ras.rst
  Docs: Fix breakage with Sphinx 1.5 and upper
  Docs: Include the Latex "ifthen" package
  doc/kokr/howto: Only send regression fixes after -rc1
  docs-rst: fix broken links to dynamic-debug-howto in kernel-parameters
  doc: Document suitability of IBM Verse for kernel development
  Doc: fix a markup error in coding-style.rst
  docs: driver-api: i2c: remove some outdated information
  Documentation: DMA API: fix a typo in a function name
  Docs: Insert missing space to separate link from text
  doc/ko_KR/memory-barriers: Update control-dependencies example
  Documentation, kbuild: fix typo "minimun" -> "minimum"
  docs: Fix some formatting issues in request-key.rst
  doc: ReSTify keys-trusted-encrypted.txt
  doc: ReSTify keys-request-key.txt
  ...

Pull char/misc updates from Greg KH:
 "Here is the "big" char/misc driver patchset for 4.13-rc1.

  Lots of stuff in here, a large thunderbolt update, w1 driver header
  reorg, the new mux driver subsystem, google firmware driver updates,
  and a raft of other smaller things. Full details in the shortlog.

  All of these have been in linux-next for a while with the only
  reported issue being a merge problem with this tree and the jc-docs
  tree in the w1 documentation area"

* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (147 commits)
  misc: apds990x: Use sysfs_match_string() helper
  mei: drop unreachable code in mei_start
  mei: validate the message header only in first fragment.
  DocBook: w1: Update W1 file locations and names in DocBook
  mux: adg792a: always require I2C support
  nvmem: rockchip-efuse: add support for rk322x-efuse
  nvmem: core: add locking to nvmem_find_cell
  nvmem: core: Call put_device() in nvmem_unregister()
  nvmem: core: fix leaks on registration errors
  nvmem: correct Broadcom OTP controller driver writes
  w1: Add subsystem kernel public interface
  drivers/fsi: Add module license to core driver
  drivers/fsi: Use asynchronous slave mode
  drivers/fsi: Add hub master support
  drivers/fsi: Add SCOM FSI client device driver
  drivers/fsi/gpio: Add tracepoints for GPIO master
  drivers/fsi: Add GPIO based FSI master
  drivers/fsi: Document FSI master sysfs files in ABI
  drivers/fsi: Add error handling for slave
  drivers/fsi: Add tracepoints for low-level operations
  ...

Merge tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big driver core update for 4.13-rc1.

  The large majority of this is a lot of cleanup of old fields in the
  driver core structures and their remaining usages in random drivers.
  All of those fixes have been reviewed by the various subsystem
  maintainers. There's also some small firmware updates in here, a new
  kobject uevent api interface that makes userspace interaction easier,
  and a few other minor things.

  All of these have been in linux-next for a long while with no reported
  issues"

* tag 'driver-core-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (56 commits)
  arm: mach-rpc: ecard: fix build error
  zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()
  driver-core: remove struct bus_type.dev_attrs
  powerpc: vio_cmo: use dev_groups and not dev_attrs for bus_type
  powerpc: vio: use dev_groups and not dev_attrs for bus_type
  USB: usbip: convert to use DRIVER_ATTR_RW
  s390: drivers: convert to use DRIVER_ATTR_RO/WO
  platform: thinkpad_acpi: convert to use DRIVER_ATTR_RO/RW
  pcmcia: ds: convert to use DRIVER_ATTR_RO
  wireless: ipw2x00: convert to use DRIVER_ATTR_RW
  net: ehea: convert to use DRIVER_ATTR_RO
  net: caif: convert to use DRIVER_ATTR_RO
  TTY: hvc: convert to use DRIVER_ATTR_RW
  PCI: pci-driver: convert to use DRIVER_ATTR_WO
  IB: nes: convert to use DRIVER_ATTR_RW
  HID: hid-core: convert to use DRIVER_ATTR_RO and drv_groups
  arm: ecard: fix dev_groups patch typo
  tty: serdev: use dev_groups and not dev_attrs for bus_type
  sparc: vio: use dev_groups and not dev_attrs for bus_type
  hid: intel-ish-hid: use dev_groups and not dev_attrs for bus_type
  ...

Pull tty/serial updates from Greg KH:
 "Here is the large tty/serial patchset for 4.13-rc1.

  A lot of tty and serial driver updates are in here, along with some
  fixups for some __get/put_user usages that were reported. Nothing
  huge, just lots of development by a number of different developers,
  full details in the shortlog.

  All of these have been in linux-next for a while"

* tag 'tty-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
  tty: serial: lpuart: add a more accurate baud rate calculation method
  tty: serial: lpuart: add earlycon support for imx7ulp
  tty: serial: lpuart: add imx7ulp support
  dt-bindings: serial: fsl-lpuart: add i.MX7ULP support
  tty: serial: lpuart: add little endian 32 bit register support
  tty: serial: lpuart: refactor lpuart32_{read|write} prototype
  tty: serial: lpuart: introduce lpuart_soc_data to represent SoC property
  serial: imx-serial - move DMA buffer configuration to DT
  serial: imx: Enable RTSD only when needed
  serial: imx: Remove unused members from imx_port struct
  serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeout
  serial: 8250: Fix THRE flag usage for CAP_MINI
  tty/serial: meson_uart: update to stable bindings
  dt-bindings: serial: Add bindings for the Amlogic Meson UARTs
  serial: Delete dead code for CIR serial ports
  serial: sirf: make of_device_ids const
  serial/mpsc: switch to dma_alloc_attrs
  tty: serial: Add Actions Semi Owl UART earlycon
  dt-bindings: serial: Document Actions Semi Owl UARTs
  tty/serial: atmel: make the driver DT only
  ...

Pull staging/IIO updates from Greg KH:
 "Here's the large set of staging and iio driver patches for 4.13-rc1.

  After over 500 patches, we removed about 200 more lines of code than
  we added, not great, but we added some new IIO drivers for unsupported
  hardware, so it's an overall win.

  Also here are lots of small fixes, and some tty core api additions
  (with the tty maintainer's ack) for the speakup drivers, those are
  finally getting some much needed cleanups and are looking much better
  now than before. Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (529 commits)
  staging: lustre: replace kmalloc with kmalloc_array
  Staging: ion: fix code style warning from NULL comparisons
  staging: fsl-mc: make dprc.h header private
  staging: fsl-mc: move mc-cmd.h contents in the public header
  staging: fsl-mc: move mc-sys.h contents in the public header
  staging: fsl-mc: fix a few implicit includes
  staging: fsl-mc: remove dpmng API files
  staging: fsl-mc: move rest of mc-bus.h to private header
  staging: fsl-mc: move couple of definitions to public header
  staging: fsl-mc: move irq domain creation prototype to public header
  staging: fsl-mc: turn several exported functions static
  staging: fsl-mc: delete prototype of unimplemented function
  staging: fsl-mc: delete duplicated function prototypes
  staging: fsl-mc: decouple the mc-bus public headers from dprc.h
  staging: fsl-mc: drop useless #includes
  staging: fsl-mc: be consistent when checking strcmp() return
  staging: fsl-mc: move comparison before strcmp() call
  staging: speakup: make function ser_to_dev static
  staging: ks7010: fix spelling mistake: "errror" -> "error"
  staging: rtl8192e: fix spelling mistake: "respose" -> "response"
  ...

Pull USB/PHY updates from Greg KH:
 "Here is the big patchset of USB and PHY driver updates for 4.13-rc1.

  On the PHY side, they decided to move files around to "make things
  easier" in their tree. Hopefully that wasn't a mistake, but in
  linux-next testing, we haven't had any reported problems.

  There's the usual set of gadget and xhci and musb updates in here as
  well, along with a number of smaller updates for a raft of different
  USB drivers. Full details in the shortlog, nothing really major.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (173 commits)
  Add USB quirk for HVR-950q to avoid intermittent device resets
  USB hub_probe: rework ugly goto-into-compound-statement
  usb: host: ohci-pxa27x: Handle return value of clk_prepare_enable
  USB: serial: cp210x: add ID for CEL EM3588 USB ZigBee stick
  usbip: Fix uninitialized variable bug in vhci
  usb: core: read USB ports from DT in the usbport LED trigger driver
  dt-bindings: leds: document new trigger-sources property
  usb: typec: ucsi: Add ACPI driver
  usb: typec: Add support for UCSI interface
  usb: musb: compress return logic into one line
  USB: serial: propagate late probe errors
  USB: serial: refactor port endpoint setup
  usb: musb: tusb6010_omap: Convert to DMAengine API
  ARM: OMAP2+: DMA: Add slave map entries for 24xx external request lines
  usb: musb: tusb6010: Handle DMA TX completion in DMA callback as well
  usb: musb: tusb6010_omap: Allocate DMA channels upfront
  usb: musb: tusb6010_omap: Create new struct for DMA data/parameters
  usb: musb: tusb6010_omap: Use one musb_ep_select call in tusb_omap_dma_program
  usb: musb: tusb6010: Add MUSB_G_NO_SKB_RESERVE to quirks
  usb: musb: Add quirk to avoid skb reserve in gadget mode
  ...

Pull RAS updates from Thomas Gleixner:
 "The RAS updates for the 4.13 merge window:

   - Cleanup of the MCE injection facility (Borsilav Petkov)

   - Rework of the AMD/SMCA handling (Yazen Ghannam)

   - Enhancements for ACPI/APEI to handle new notitication types (Shiju
     Jose)

   - atomic_t to refcount_t conversion (Elena Reshetova)

   - A few fixes and enhancements all over the place"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  RAS/CEC: Check the correct variable in the debugfs error handling
  x86/mce: Always save severity in machine_check_poll()
  x86/MCE, xen/mcelog: Make /dev/mcelog registration messages more precise
  x86/mce: Update bootlog description to reflect behavior on AMD
  x86/mce: Don't disable MCA banks when offlining a CPU on AMD
  x86/mce/mce-inject: Preset the MCE injection struct
  x86/mce: Clean up include files
  x86/mce: Get rid of register_mce_write_callback()
  x86/mce: Merge mce_amd_inj into mce-inject
  x86/mce/AMD: Use saved threshold block info in interrupt handler
  x86/mce/AMD: Use msr_stat when clearing MCA_STATUS
  x86/mce/AMD: Carve out SMCA bank configuration
  x86/mce/AMD: Redo error logging from APIC LVT interrupt handlers
  x86/mce: Convert threshold_bank.cpus from atomic_t to refcount_t
  RAS: Make local function parse_ras_param() static
  ACPI/APEI: Handle GSIV and GPIO notification types

Pull SMP hotplug updates from Thomas Gleixner:
 "This update is primarily a cleanup of the CPU hotplug locking code.

  The hotplug locking mechanism is an open coded RWSEM, which allows
  recursive locking. The main problem with that is the recursive nature
  as it evades the full lockdep coverage and hides potential deadlocks.

  The rework replaces the open coded RWSEM with a percpu RWSEM and
  establishes full lockdep coverage that way.

  The bulk of the changes fix up recursive locking issues and address
  the now fully reported potential deadlocks all over the place. Some of
  these deadlocks have been observed in the RT tree, but on mainline the
  probability was low enough to hide them away."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  cpu/hotplug: Constify attribute_group structures
  powerpc: Only obtain cpu_hotplug_lock if called by rtasd
  ARM/hw_breakpoint: Fix possible recursive locking for arch_hw_breakpoint_init
  cpu/hotplug: Remove unused check_for_tasks() function
  perf/core: Don't release cred_guard_mutex if not taken
  cpuhotplug: Link lock stacks for hotplug callbacks
  acpi/processor: Prevent cpu hotplug deadlock
  sched: Provide is_percpu_thread() helper
  cpu/hotplug: Convert hotplug locking to percpu rwsem
  s390: Prevent hotplug rwsem recursion
  arm: Prevent hotplug rwsem recursion
  arm64: Prevent cpu hotplug rwsem recursion
  kprobes: Cure hotplug lock ordering issues
  jump_label: Reorder hotplug lock and jump_label_lock
  perf/tracing/cpuhotplug: Fix locking order
  ACPI/processor: Use cpu_hotplug_disable() instead of get_online_cpus()
  PCI: Replace the racy recursion prevention
  PCI: Use cpu_hotplug_disable() instead of get_online_cpus()
  perf/x86/intel: Drop get_online_cpus() in intel_snb_check_microcode()
  x86/perf: Drop EXPORT of perf_check_microcode
  ...

Pull x86 timers updates from Thomas Gleixner:
 "This update contains:

   - The solution for the TSC deadline timer borkage, which is caused by
     a hardware problem in the TSC_ADJUST/TSC_DEADLINE_TIMER logic.

     The problem is documented now and fixed with a microcode update, so
     we can remove the workaround and just check for the microcode version.

     If the microcode is not up to date, then the TSC deadline timer is
     disabled. If the borkage is fixed by the proper microcode version,
     then the deadline timer can be used. In both cases the restrictions
     to the range of the TSC_ADJUST value, which were added as
     workarounds, are removed.

  - A few simple fixes and updates to the timer related x86 code"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Call check_system_tsc_reliable() before unsynchronized_tsc()
  x86/hpet: Do not use smp_processor_id() in preemptible code
  x86/time: Make setup_default_timer_irq() static
  x86/tsc: Remove the TSC_ADJUST clamp
  x86/apic: Add TSC_DEADLINE quirk due to errata
  x86/apic: Change the lapic name in deadline mode

Pull x86 PCI updates from Thomas Gleixner:
 "This update provides the seperation of x86 PCI accessors from the
  global PCI lock in the generic PCI config space accessors.

  The reasons for this are:

   - x86 has it's own PCI config lock for various reasons, so the
     accessors have to lock two locks nested.

   - The ECAM (mmconfig) access to the extended configuration space does
     not require locking. The existing generic locking causes a massive
     lock contention when accessing the extended config space of the
     Uncore facility for performance monitoring.

  The commit which switched the access to the primary config space over
  to ECAM mode has been removed from the branch, so the primary config
  space is still accessed with type1 accessors properly serialized by
  the x86 internal locking.

  Bjorn agreed on merging this through the x86 tree"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/PCI: Select CONFIG_PCI_LOCKLESS_CONFIG
  PCI: Provide Kconfig option for lockless config space accessors
  x86/PCI/ce4100: Properly lock accessor functions
  x86/PCI: Abort if legacy init fails
  x86/PCI: Remove duplicate defines

Pull irq updates from Thomas Gleixner:
 "The irq department delivers:

   - Expand the generic infrastructure handling the irq migration on CPU
     hotplug and convert X86 over to it. (Thomas Gleixner)

     Aside of consolidating code this is a preparatory change for:

   - Finalizing the affinity management for multi-queue devices. The
     main change here is to shut down interrupts which are affine to a
     outgoing CPU and reenabling them when the CPU comes online again.
     That avoids moving interrupts pointlessly around and breaking and
     reestablishing affinities for no value. (Christoph Hellwig)

     Note: This contains also the BLOCK-MQ and NVME changes which depend
     on the rework of the irq core infrastructure. Jens acked them and
     agreed that they should go with the irq changes.

   - Consolidation of irq domain code (Marc Zyngier)

   - State tracking consolidation in the core code (Jeffy Chen)

   - Add debug infrastructure for hierarchical irq domains (Thomas
     Gleixner)

   - Infrastructure enhancement for managing generic interrupt chips via
     devmem (Bartosz Golaszewski)

   - Constification work all over the place (Tobias Klauser)

   - Two new interrupt controller drivers for MVEBU (Thomas Petazzoni)

   - The usual set of fixes, updates and enhancements all over the
     place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (112 commits)
  irqchip/or1k-pic: Fix interrupt acknowledgement
  irqchip/irq-mvebu-gicp: Allocate enough memory for spi_bitmap
  irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
  nvme: Allocate queues for all possible CPUs
  blk-mq: Create hctx for each present CPU
  blk-mq: Include all present CPUs in the default queue mapping
  genirq: Avoid unnecessary low level irq function calls
  genirq: Set irq masked state when initializing irq_desc
  genirq/timings: Add infrastructure for estimating the next interrupt arrival time
  genirq/timings: Add infrastructure to track the interrupt timings
  genirq/debugfs: Remove pointless NULL pointer check
  irqchip/gic-v3-its: Don't assume GICv3 hardware supports 16bit INTID
  irqchip/gic-v3-its: Add ACPI NUMA node mapping
  irqchip/gic-v3-its-platform-msi: Make of_device_ids const
  irqchip/gic-v3-its: Make of_device_ids const
  irqchip/irq-mvebu-icu: Add new driver for Marvell ICU
  irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP
  dt-bindings/interrupt-controller: Add DT binding for the Marvell ICU
  genirq/irqdomain: Remove auto-recursive hierarchy support
  irqchip/MSI: Use irq_domain_update_bus_token instead of an open coded access
  ...

Pull timer updates from Thomas Gleixner:
 "A rather large update for timers/timekeeping:

   - compat syscall consolidation (Al Viro)

   - Posix timer consolidation (Christoph Helwig / Thomas Gleixner)

   - Cleanup of the device tree based initialization for clockevents and
     clocksources (Daniel Lezcano)

   - Consolidation of the FTTMR010 clocksource/event driver (Linus
     Walleij)

   - The usual set of small fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (93 commits)
  timers: Make the cpu base lock raw
  clocksource/drivers/mips-gic-timer: Fix an error code in 'gic_clocksource_of_init()'
  clocksource/drivers/fsl_ftm_timer: Unmap region obtained by of_iomap
  clocksource/drivers/tcb_clksrc: Make IO endian agnostic
  clocksource/drivers/sun4i: Switch to the timer-of common init
  clocksource/drivers/timer-of: Fix invalid iomap check
  Revert "ktime: Simplify ktime_compare implementation"
  clocksource/drivers: Fix uninitialized variable use in timer_of_init
  kselftests: timers: Add test for frequency step
  kselftests: timers: Fix inconsistency-check to not ignore first timestamp
  time: Add warning about imminent deprecation of CONFIG_GENERIC_TIME_VSYSCALL_OLD
  time: Clean up CLOCK_MONOTONIC_RAW time handling
  posix-cpu-timers: Make timespec to nsec conversion safe
  itimer: Make timeval to nsec conversion range limited
  timers: Fix parameter description of try_to_del_timer_sync()
  ktime: Simplify ktime_compare implementation
  clocksource/drivers/fttmr010: Factor out clock read code
  clocksource/drivers/fttmr010: Implement delay timer
  clocksource/drivers: Add timer-of common init routine
  clocksource/drivers/tcb_clksrc: Save timer context on suspend/resume
  ...

Pull s390 updates from Martin Schwidefsky:
 "The bulk of the s390 patches for 4.13. Some new things but mostly bug
  fixes and cleanups. Noteworthy changes:

   - The SCM block driver is converted to blk-mq

   - Switch s390 to 5 level page tables. The virtual address space for a
     user space process can now have up to 16EB-4KB.

   - Introduce a ELF phdr flag for qemu to avoid the global
     vm.alloc_pgste which forces all processes to large page tables

   - A couple of PCI improvements to improve error recovery

   - Included is the merge of the base support for proper machine checks
     for KVM"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits)
  s390/dasd: Fix faulty ENODEV for RO sysfs attribute
  s390/pci: recognize name clashes with uids
  s390/pci: provide more debug information
  s390/pci: fix handling of PEC 306
  s390/pci: improve pci hotplug
  s390/pci: introduce clp_get_state
  s390/pci: improve error handling during fmb (de)registration
  s390/pci: improve unreg_ioat error handling
  s390/pci: improve error handling during interrupt deregistration
  s390/pci: don't cleanup in arch_setup_msi_irqs
  KVM: s390: Backup the guest's machine check info
  s390/nmi: s390: New low level handling for machine check happening in guest
  s390/fpu: export save_fpu_regs for all configs
  s390/kvm: avoid global config of vm.alloc_pgste=1
  s390: rename struct psw_bits members
  s390: rename psw_bits enums
  s390/mm: use correct address space when enabling DAT
  s390/cio: introduce io_subchannel_type
  s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL
  s390/dumpstack: remove raw stack dump
  ...

Pull parisc updates from Helge Deller:
 "Main changes are:

   - Added support to the parisc dma functions to return DMA_ERROR_CODE
     if DMA isn't possible. This fixes a long standing kernel crash if
     parport_pc is enabled (by Thomas Bogendoerfer, marked for stable
     series).

   - Use the compat_sys_keyctl() in compat mode (by Eric Biggers, marked
     for stable series).

   - Initial support for the Page Deallocation Table (PDT) which is
     maintained by firmware and holds the list of memory addresses which
     had physical errors. By checking that list we can prevent Linux to
     use those broken memory areas.

   - Ensure IRQs are off in switch_mm().

   - Report SIGSEGV instead of SIGBUS when running out of stack.

   - Mark the cr16 clocksource stable on single-socket and single-core
     machines"

* 'parisc-4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
  parisc: Report SIGSEGV instead of SIGBUS when running out of stack
  parisc: use compat_sys_keyctl()
  parisc: Don't hardcode PSW values in hpmc code
  parisc: Don't hardcode PSW values in gsc_*() functions
  parisc: Avoid zeroing gr[0] in fixup_exception()
  parisc/mm: Ensure IRQs are off in switch_mm()
  parisc: Add Page Deallocation Table (PDT) support
  parisc: Enhance detection of synchronous cr16 clocksources
  parisc: Drop per_cpu uaccess related exception_data struct
  parisc: Inline trivial exception code in lusercopy.S

Pull microblaze updates from Michal Simek:

 - timer fix

 - use simplified macro in dma.c

 - wire-up new syscall

 - remove asp-generic wrappers

 - fix MMU table handling

 - defconfig updates

 - low-level entry.S changes

* tag 'microblaze-4.13-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix MSR flags when returning from exception
  microblaze: Separate GP registers from MSR handling
  microblaze: Enabling CONFIG_BRIDGE in mmu_defconfig
  microblaze: Enabling CONFIGS related to MTD
  microblaze: Update defconfigs
  microblaze: mm: Flush TLB to ensure correct mapping when higmem ON
  microblaze: remove asm-generic wrapper headers
  microblaze: wire up statx syscall
  microblaze: Set ->min_delta_ticks and ->max_delta_ticks for timer
  microblaze: use sg_phys()

Pull m68k updates from Geert Uytterhoeven:

  - NuBus improvements and cleanups

  - defconfig updates

  - Fix debugger syscall restart interactions, leading to the global
    removal of ptrace_signal_deliver()

* tag 'm68k-for-v4.13-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Remove ptrace_signal_deliver
  m68k/defconfig: Update defconfigs for v4.12-rc1
  nubus: Fix pointer validation
  nubus: Remove slot zero probe

Pull x86 mm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Continued work to add support for 5-level paging provided by future
     Intel CPUs. In particular we switch the x86 GUP code to the generic
     implementation. (Kirill A. Shutemov)

   - Continued work to add PCID CPU support to native kernels as well.
     In this round most of the focus is on reworking/refreshing the TLB
     flush infrastructure for the upcoming PCID changes. (Andy
     Lutomirski)"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  x86/mm: Delete a big outdated comment about TLB flushing
  x86/mm: Don't reenter flush_tlb_func_common()
  x86/KASLR: Fix detection 32/64 bit bootloaders for 5-level paging
  x86/ftrace: Exclude functions in head64.c from function-tracing
  x86/mmap, ASLR: Do not treat unlimited-stack tasks as legacy mmap
  x86/mm: Remove reset_lazy_tlbstate()
  x86/ldt: Simplify the LDT switching logic
  x86/boot/64: Put __startup_64() into .head.text
  x86/mm: Add support for 5-level paging for KASLR
  x86/mm: Make kernel_physical_mapping_init() support 5-level paging
  x86/mm: Add sync_global_pgds() for configuration with 5-level paging
  x86/boot/64: Add support of additional page table level during early boot
  x86/boot/64: Rename init_level4_pgt and early_level4_pgt
  x86/boot/64: Rewrite startup_64() in C
  x86/boot/compressed: Enable 5-level paging during decompression stage
  x86/boot/efi: Define __KERNEL32_CS GDT on 64-bit configurations
  x86/boot/efi: Fix __KERNEL_CS definition of GDT entry on 64-bit configurations
  x86/boot/efi: Cleanup initialization of GDT entries
  x86/asm: Fix comment in return_from_SYSCALL_64()
  x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation
  ...

Pull x86 microcode updates from Ingo Molnar:
 "The main changes are a fix early microcode application for
  resume-from-RAM, plus a 32-bit initrd placement fix - by Borislav
  Petkov"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Make a couple of symbols static
  x86/microcode/intel: Save pointer to ucode patch for early AP loading
  x86/microcode: Look for the initrd at the correct address on 32-bit