- 19 Jul, 2018 5 commits
-
-
Gustavo A. R. Silva authored
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Gustavo A. R. Silva authored
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by:
-
Gustavo A. R. Silva authored
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by:
-
Gustavo A. R. Silva authored
PTR_RET is deprecated, use PTR_ERR_OR_ZERO instead. Signed-off-by:
-
Martin Schwidefsky authored
The kbd_ioctl uses two user controlled indexes for KDGKBENT/KDSKBENT. Use array_index_nospec to prevent any out of bounds speculation. Signed-off-by:
-
- 18 Jul, 2018 1 commit
-
-
Martin Schwidefsky authored
Detect and report the etoken facility. With spectre_v2=auto or CONFIG_EXPOLINE_AUTO=y automatically disable expolines and use the full branch prediction mode for the kernel. Signed-off-by:
-
- 17 Jul, 2018 5 commits
-
-
Sebastian Ott authored
Remove attribute packed where possible failing this add proper alignment information to fix warnings like the one below: drivers/s390/cio/chsc.c: In function 'chsc_siosl': drivers/s390/cio/chsc.c:1287:2: warning: alignment 1 of 'struct <anonymous>' is less than 4 [-Wpacked-not-aligned] } __attribute__ ((packed)) *siosl_area; Note: this patch should be a nop since non of these structs use auto storage but allocated pages. However there are changes to the generated code because of additional padding at the end of some of the structs due to alignment when memset(foo, 0, sizeof(*foo)) is used. Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Both css_evaluate_new_subchannel and cio_validate_subchannel used stsch and css_sch_is_valid to check for a valid device. Reduce stsch calls during subchannel evaluation by re-using schib data. Also the type/devno valid information is only checked once. Signed-off-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
-
Sebastian Ott authored
In css_alloc_subchannel we allocate the subchannel and do a validation of the subchannel (to decide if we should look for devices via this subchannel). On a typical LPAR we find lots of subchannels to be invalid (because there is no device attached or the device is blacklisted) leading to lots of useless kmalloc and kfree calls. This patch changes the order to only allocate the subchannels that have been found valid. Signed-off-by:
-
Sebastian Ott authored
The css bus code uses 2 initcalls: channel_subsystem_init to initialize internal data and channel_subsystem_init_sync to start scanning for devices and wait for it to finish. The start scanning for devices part is moved to the first initcall such that more work happens in parallel. Signed-off-by:
-
Sebastian Ott authored
Improve locking in chp_new to make sure that we don't register the same chpid twice. Chpid registration was synchronized via the machine check handler thread but we also have codepaths to look for new chpids triggered independent of that thread (during IPL or resume from hibernate). Signed-off-by:
-
- 16 Jul, 2018 3 commits
-
-
Claudio Imbrenda authored
When the oom killer kills a userspace process in the page fault handler while in guest context, the fault handler fails to release the mm_sem if the FAULT_FLAG_RETRY_NOWAIT option is set. This leads to a deadlock when tearing down the mm when the process terminates. This bug can only happen when pfault is enabled, so only KVM clients are affected. The problem arises in the rare cases in which handle_mm_fault does not release the mm_sem. This patch fixes the issue by manually releasing the mm_sem when needed. Fixes: 24eb3a82 ("KVM: s390: Add FAULT_FLAG_RETRY_NOWAIT for guest fault") Cc: <stable@vger.kernel.org> # 3.15+ Signed-off-by:
Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
cmm_set_timer could be called concurrently from cmm_thread, cmm proc handler, upon cmm smsg receive and timer function itself. To avoid potential race condition and hitting BUG_ON in add_timer on already pending timer simply reuse mod_timer which is according to documentation "the only safe way to modify the timeout" with multiple unserialized concurrent users. mod_timer can handle both active and inactive timers which allows to carry out minor code simplification as well. Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Replace strncpy which is used to deliberately avoid string NUL-termination with memcpy. This allows to get rid of gcc 8 stringop-truncation warning: inlined from 'query_crypto_facility.constprop' at drivers/s390/crypto/pkey_api.c:702:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 8 bytes from a string of the same length [-Wstringop-truncation] Reviewed-by:Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
-
- 13 Jul, 2018 1 commit
-
-
Dong Jia Shi authored
I am leaving IBM and will move on to other working area, so remove myself as a vfio-ccw maintainer. Signed-off-by:
Dong Jia Shi <bjsdjshi@linux.ibm.com> Message-Id: <20180706015743.41810-1-bjsdjshi@linux.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
-
- 06 Jul, 2018 8 commits
-
-
Vasily Gorbik authored
Simplify appldata proc handlers by reusing generic proc handler functions. Tested-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
-
Vasily Gorbik authored
Split cmm_pages_handler into cmm_pages_handler and cmm_timed_pages_handler, each handling separate proc entry. And reuse proc_doulongvec_minmax to simplify proc handlers. Min/max values are optional and are omitted here. Reviewed-by:
-
Vasily Gorbik authored
Reuse proc_douintvec_minmax to simplify topology mode proc handler. This also enforces correct range of 0-1 on proc writes and correctly handles numbers starting with 0 or spaces. Before: $ echo 01 > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 0 $ echo ' 1' > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo 2 > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo 12 > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 1 After: $ echo 01 > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 1 $ echo ' 1' > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 1 $ echo 2 > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo 12 > /proc/sys/s390/topology -bash: echo: write error: Invalid argument $ echo ' 0' > /proc/sys/s390/topology $ cat /proc/sys/s390/topology 0 Reviewed-by:
-
Vasily Gorbik authored
Reuse generic proc_dointvec_minmax proc handler instead of proc_handler_callhome. Reviewed-by:
-
Vasily Gorbik authored
Since proc_dointvec does not perform value range control, proc_dointvec_minmax should be used to limit value range, which is clearly intended here, as the internal representation of the value: unsigned int alloc_pgste:1; In fact it currently works, since we have mm->context.alloc_pgste = page_table_allocate_pgste || ... ... since commit 23fefe11 ("s390/kvm: avoid global config of vm.alloc_pgste=1") Before that it was mm->context.alloc_pgste = page_table_allocate_pgste; which was broken. That was introduced with commit 0b46e0a3 ("s390/kvm: remove delayed reallocation of page tables for KVM"). Fixes: 0b46e0a3 ("s390/kvm: remove delayed reallocation of page tables for KVM") Acked-by:Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
-
Philipp Rudo authored
Currently there are some variables in the purgatory (e.g. kernel_entry) which are defined twice, once in assembler- and once in c-code. The reason for this is that these variables are set during purgatory load, where sanity checks on the corresponding Elf_Sym's are made, while they are used in assembler-code. Thus adding a second definition in c-code is a handy workaround to guarantee correct Elf_Sym's are created. When the purgatory is compiled with -fcommon (default for gcc on s390) this is no problem because both symbols are merged by the linker. However this is not required by ISO C and when the purgatory is built with -fno-common the linker fails with errors like arch/s390/purgatory/purgatory.o:(.bss+0x18): multiple definition of `kernel_entry' arch/s390/purgatory/head.o:/.../arch/s390/purgatory/head.S:230: first defined here Thus remove the duplicate definitions and add the required size and type information to the assembler definition. Also add -fno-common to the command line options to prevent similar hacks in the future. Signed-off-by:
Philipp Rudo <prudo@linux.ibm.com> Acked-by:
-
Philipp Rudo authored
Without FORCE make does not detect changes only made to the command line options. So object files might not be re-built even when they should be. Fix this by adding FORCE where it is missing. Fixes: 840798a1 ("s390/kexec_file: Add purgatory") Cc: <stable@vger.kernel.org> # 4.17 Signed-off-by:
-
Philipp Rudo authored
When the kernel is built with CONFIG_EXPOLINE=y and a compiler with indirect branch mitigation enabled the purgatory crashes. The reason for that is that the macros defined for expoline are used in mem.S. These macros define new sections (.text.__s390x_indirect_*) which are marked executable. Due to the missing linker script those sections are linked to address 0, just as the .text section. In combination with the entry point also being at address 0 this causes the purgatory load code (kernel/kexec_file.c: kexec_purgatory_setup_sechdrs) to update the entry point twice. Thus the old kernel jumps to some 'random' address causing the crash. To fix this turn off expolines for the purgatory. There is no problem with this in this case due to the fact that the purgatory only runs once and the tlb is purged (diag 308) in the end. Fixes: 840798a1 ("s390/kexec_file: Add purgatory") Cc: <stable@vger.kernel.org> # 4.17 Signed-off-by:
-
- 04 Jul, 2018 3 commits
-
-
Kees Cook authored
In the quest to remove all stack VLA usage from the kernel[1], this moves the "$#" replacement from being an argument to being inside the function, which avoids generating VLAs. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.comSigned-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Sebastian Ott authored
Change the tasklets parameter type to fix W=1 warnings when building with gcc 8 like below: drivers/s390/block/dasd.c: In function 'dasd_alloc_device': drivers/s390/block/dasd.c:129:8: warning: cast between incompatible function types from 'void (*)(struct dasd_device *)' to 'void (*)(long unsigned int)' [-Wcast-function-type] (void (*)(unsigned long)) dasd_device_tasklet, ^ Signed-off-by:Jan Höppner <hoeppner@linux.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Add support for format 3 function measurement blocks. Signed-off-by:
-
- 02 Jul, 2018 14 commits
-
-
Vasily Gorbik authored
Since decompressor cflags and aflags are made from scratch add extra debug flags when CONFIG_DEBUG_INFO is enabled. Also adds support for CONFIG_DEBUG_INFO_DWARF4 option. Acked-by:
-
Vasily Gorbik authored
Adding *.o.chkbss files to targets list makes sure that the kbuild is aware of them and removes them during make clean. Also remove *.o.chkbss file before an actual check, to avoid having stale *.o.chkbss file left even if the check is failed. Acked-by:
-
Vasily Gorbik authored
startup.a build rule packs a list of prerequisites into archive. That didn't take into account extra prerequisites added by chkbss, so that zero length *.o.chkbss files were also packed into the archive. To avoid that filter only real object from prerequisites list. Acked-by:
-
Vasily Gorbik authored
Correct merging error which replaced startup.a in targets list with non-existing setup.a. Due to missing startup.a in targets list if_changed triggered startup.a rebuild unconditionally. Fixes: 3e200c54438d ("s390/decompressor: avoid reusing uncompressed image objects") Acked-by: -
Heiko Carstens authored
Get rid of this compile warning for !PROC_FS: CC arch/s390/kernel/sysinfo.o arch/s390/kernel/sysinfo.c:275:12: warning: 'sysinfo_show' defined but not used [-Wunused-function] static int sysinfo_show(struct seq_file *m, void *v) Signed-off-by:
-
Vasily Gorbik authored
Replace strncpy which has been used to copy a substring into buf without NUL-termination with memcpy to avoid the following gcc 8 warnings: arch/s390/tools/gen_opcode_table.c: In function ‘add_to_group.isra.4’: arch/s390/tools/gen_opcode_table.c:260:2: warning: ‘strncpy’ output may be truncated copying 2 bytes from a string of length 19 [-Wstringop-truncation] strncpy(group->opcode, insn->opcode, 2); In function ‘print_opcode_table’, inlined from ‘main’ at arch/s390/tools/gen_opcode_table.c:333:2: arch/s390/tools/gen_opcode_table.c:286:4: warning: ‘strncpy’ output may be truncated copying 2 bytes from a string of length 19 [-Wstringop-truncation] strncpy(opcode, insn->opcode, 2); Reviewed-by: -
Vasily Gorbik authored
Since the plain vmlinux ELF file no longer carries all necessary parts for starting up (like the entry point and decompressor), add a check which would block boot process and encourage users to use bzImage or arch/s390/boot/compressed/vmlinux instead. The check relies on s390 linux entry point ABI definition, which is only present in bzImage and arch/s390/boot/compressed/vmlinux. Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
-
Vasily Gorbik authored
The following gcc warning is issued for strncpy which is used to deliberately avoid string NUL-termination. Reuse memcpy to avoid the warning. inlined from 'monwrite_diag' at drivers/s390/char/monwriter.c:64:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output truncated before terminating nul copying 7 bytes from a string of the same length [-Wstringop-truncation] Reviewed-by: -
Vasily Gorbik authored
Replace strncpy which is used to deliberately avoid string NUL-termination with memcpy. This allows to get rid of gcc 8 stringop-truncation warning: inlined from 'ext_to_int_kekl' at drivers/s390/char/tape_3590.c:123:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' output may be truncated copying 64 bytes from a string of length 64 [-Wstringop-truncation] Also replaces "for" loop on memset. Reviewed-by: -
Vasily Gorbik authored
Use strlcpy to make sure strings are NUL-terminated. Fixes the following gcc 8 warning: inlined from 'register_tape_dev' at drivers/s390/char/tape_class.c:57:2: ./include/linux/string.h:246:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation] Acked-by:
-
Vasily Gorbik authored
Aligning struct lowcore to double page size allows to get rid of this gcc warning: In file included from ./arch/s390/include/asm/setup.h:56, from ./arch/s390/include/asm/page.h:36, from ./arch/s390/include/asm/user.h:11, from ./include/linux/user.h:1, from ./include/linux/elfcore.h:5, from ./include/linux/crash_core.h:6, from ./include/linux/kexec.h:18, from arch/s390/purgatory/purgatory.c:10: ./arch/s390/include/asm/lowcore.h:189:1: warning: alignment 1 of 'struct lowcore' is less than 8 [-Wpacked-not-aligned] } __packed; Acked-by: -
Vasily Gorbik authored
The following linker construct is problematic with linkers of binutils < 2.28: EXCLUDE_FILE (*piggy.o) *(.rodata.*) from 8f1732fc2a11dc of binutils: "though the linker accepts this without complaint the EXCLUDE_FILE part is silently ignored and has no effect." Silent ignoring of EXCLUDE_FILE construct made .rodata.compressed be part of .rodata, and in case of .rodata.compressed following some unaligned data, input_len would also become unaligned. from arch/s390/boot/compressed/vmlinux.map: .rodata.compressed 0x0000000000012fea 0x4d57e7 arch/s390/boot/compressed/piggy.o 0x0000000000012fea input_len 0x0000000000012fee input_data input_len is later used here: arch/s390/boot/compressed/misc.c:113 __decompress(input_data, input_len, NULL, NULL, output, 0, NULL, error); asm generated by gcc looks like: .loc 3 113 0 egfrl %r11,input_len from what assembler generates invalid (the second operand must be aligned on a doubleword boundary): 0x00000000000129b4 <+148>: c4 bc 00 00 03 1b lgfrl %r11,0x12fea hence specification exception is recognized. To avoid an issue use EXCLUDE_FILE construct which is recognized by older linkers (since at least binutils-2_11) *(EXCLUDE_FILE (*piggy.o) .rodata.compressed) Also ensure that .rodata.compressed is at least doubleword aligned. Fixes: 89b5202e ("s390/decompressor: support uncompressed kernel") Reported-by:Halil Pasic <pasic@linux.ibm.com> Acked-by:
-
Vasily Gorbik authored
Since the uncompressed image .text section starts at 0x100000 now there is no need to redefine _text to something else to make perf happy. Reviewed-by:
-
Vasily Gorbik authored
Avoid unnecessary rewrite of psw and merge _stext into startup_continue. This allows to move _stext definition to vmlinux.lds.S, where _etext is also defined and set _stext to the actual beginning of .text at 0x100000. This fixes the problem with setting the last .text page as not-executable due to vmem_map_init relying on page alinged _stext and _etext. Fixes: bd79d663 ("s390/decompressor: trim the kernel image up to 1M") Reported-by:
Nils Hoppmann <niho@de.ibm.com> Reviewed-by:
-
