- 02 Apr, 2024 1 commit
-
-
Abhinav Kumar authored
Fix the typo in the name of dp_display_handle_port_status_changed(). Fixes: c58eb1b5 ("drm/msm/dp: fix connect/disconnect handled at irq_hpd") Signed-off-by:
Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/581746/ Link: https://lore.kernel.org/r/20240306193515.455388-1-quic_abhinavk@quicinc.com
-
- 01 Apr, 2024 1 commit
-
-
Dmitry Baryshkov authored
There is little point in using %ps to print a value known to be NULL. On the other hand it makes sense to print the callback symbol in the 'invalid IRQ' message. Correct those two error messages to make more sense. Fixes: 68931991 ("drm/msm/dpu: stop using raw IRQ indices in the kernel output") Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
-
- 29 Mar, 2024 5 commits
-
-
Kuogee Hsieh authored
At current x1e80100 interface table, interface #3 is wrongly connected to DP controller #0 and interface #4 wrongly connected to DP controller #2. Fix this problem by connect Interface #3 to DP controller #0 and interface #4 connect to DP controller #1. Also add interface #6, #7 and #8 connections to DP controller to complete x1e80100 interface table. Changs in V3: -- add v2 changes log Changs in V2: -- add x1e80100 to subject -- add Fixes Fixes: e3b1f369 ("drm/msm/dpu: Add X1E80100 support") Signed-off-by:
Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by:
Abel Vesa <abel.vesa@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/585549/ Link: https://lore.kernel.org/r/1711741586-9037-1-git-send-email-quic_khsieh@quicinc.comSigned-off-by:
-
Dmitry Baryshkov authored
The data from catalog is marked as const, so it is a part of the RO segment. Allowing userspace to write to it through debugfs can cause protection faults. Set debugfs file mode to read-only for debug entries corresponding to perf_cfg coming from catalog. Fixes: abda0d92 ("drm/msm/dpu: Mark various data tables as const") Signed-off-by:
-
Stephen Boyd authored
These debug prints are missing newlines, leading to multiple messages being printed on one line and hard to read logs. Add newlines to have the debug prints on separate lines. The DBG macro used to add a newline, but I missed that while migrating to drm_dbg wrappers. Fixes: 7cb017db ("drm/msm: Move FB debug prints to drm_dbg_state()") Fixes: 721c6e0c ("drm/msm: Move vblank debug prints to drm_dbg_vbl()") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
Johan Hovold authored
Make sure to balance the runtime PM usage counter (and suspend) before returning on connect failures (e.g. DPCD read failures after a spurious connect event or if link training fails). Fixes: 5814b8bf ("drm/msm/dp: incorporate pm_runtime framework into DP driver") Cc: stable@vger.kernel.org # 6.8 Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Reviewed-by:
-
Johan Hovold authored
Make sure to put the runtime PM usage count (and suspend) also when receiving a disconnect event while in the ST_MAINLINK_READY state. This specifically avoids leaking a runtime PM usage count on every disconnect with display servers that do not automatically enable external displays when receiving a hotplug notification. Fixes: 5814b8bf ("drm/msm/dp: incorporate pm_runtime framework into DP driver") Cc: stable@vger.kernel.org # 6.8 Cc: Kuogee Hsieh <quic_khsieh@quicinc.com> Signed-off-by:
-
- 04 Mar, 2024 23 commits
-
-
Dmitry Baryshkov authored
In order to debug commit_done timeouts, capture the devcoredump state when the first timeout occurs after the encoder has been enabled. Reviewed-by:
-
Dmitry Baryshkov authored
Stop multiplexing several events via the dpu_encoder_wait_for_event() function. Split it into two distinct functions two allow separate handling of those events. Reviewed-by:
-
Dmitry Baryshkov authored
We have several reports of vblank timeout messages. However after some debugging it was found that there might be different causes to that. To allow us to identify the DPU block that gets stuck, include the actual CTL_FLUSH value into the timeout message. Reviewed-by:
-
Paloma Arellano authored
All the components of YUV420 over DP are added. Therefore, let's mark the connector property as true for DP connector when the DP type is not eDP and when there is a CDM block available. Changes in v3: - Move setting the connector's ycbcr_420_allowed parameter so that it is not dependent on if the dp_display is not eDP Changes in v2: - Check for if dp_catalog has a CDM block available instead of checking if VSC SDP is allowed when setting the dp connector's ycbcr_420_allowed parameter Signed-off-by:
Paloma Arellano <quic_parellan@quicinc.com> Reviewed-by:
-
Paloma Arellano authored
Reserve CDM blocks for DP if the mode format is YUV420. Currently this reservation only works for writeback and DP if the format is YUV420. But this can be easily extented to other YUV formats for DP. Changes in v2: - Minor code simplification Signed-off-by:
-
Paloma Arellano authored
Adjust the encoder timing engine setup programming in the case of video mode for YUV420 over DP to accommodate CDM. Changes in v3: - Move drm_display_mode's hskew division to another patch - Minor cleanup Changes in v2: - Move timing engine programming to this patch Signed-off-by:
-
Paloma Arellano authored
Adjust the encoder format programming in the case of video mode for DP to accommodate CDM related changes. Changes in v4: - Remove hw_cdm check in dpu_encoder_needs_periph_flush() - Remove hw_cdm check when getting the fmt_fourcc in dpu_encoder_phys_vid_enable() Changes in v2: - Move timing engine programming to a separate patch from this one - Move update_pending_flush_periph() invocation completely to this patch - Change the logic of dpu_encoder_get_drm_fmt() so that it only calls drm_mode_is_420_only() instead of doing additional unnecessary checks - Create new functions msm_dp_needs_periph_flush() and it's supporting function dpu_encoder_needs_periph_flush() to check if the mode is YUV420 and VSC SDP is enabled before doing a peripheral flush Signed-off-by:
-
Paloma Arellano authored
DP controller can be setup to operate in either SDP update flush mode or peripheral flush mode based on the DP controller hardware version. Starting in DP v1.2, the hardware documents require the use of peripheral flush mode for SDP packets such as PPS OR VSC SDP packets. In-line with this guidance, lets program the DP controller to use peripheral flush mode starting DP v1.2 Changes in v4: - Clear up that DP_MAINLINK_CTRL_FLUSH_MODE register requires the use of bits [24:23] - Modify macros DP_MAINLINK_FLUSH_MODE_UPDATE_SDP and DP_MAINLINK_FLUSH_MODE_SDP_PERIPH_UPDATE to explicitly set their values in the bits of DP_MAINLINK_CTRL_FLUSH_MODE_MASK Changes in v3: - Clear up that the DP_MAINLINK_FLUSH_MODE_SDE_PERIPH_UPDATE macro is setting bits [24:23] to a value of 3 Changes in v2: - Use the original dp_catalog_hw_revision() function to correctly check the DP HW version Signed-off-by:
-
Kuogee Hsieh authored
Introduce a peripheral flushing mechanism to decouple peripheral metadata flushing from timing engine related flush. Changes in v2: - Fixed some misalignment issues Signed-off-by:
-
Paloma Arellano authored
Add support to pack and send the VSC SDP packet for DP. This therefore allows the transmision of format information to the sinks which is needed for YUV420 support over DP. Changes in v5: - Slightly modify use of drm_dp_vsc_sdp_pack() - Remove dp_catalog NULL checks - Modify dp_utils_pack_sdp_header() to more clearly pack the header buffer - Move dp_utils_pack_sdp_header() inside of dp_catalog_panel_send_vsc_sdp to clearly show the relationship between the header buffer and the vsc_sdp struct - Due to the last point, remove the dp_utils_pack_vsc_sdp() function and only call drm_dp_vsc_sdp_pack() in dp_panel_setup_vsc_sdp_yuv_420() Changes in v4: - Remove struct msm_dp_sdp_with_parity - Use dp_utils_pack_sdp_header() to pack the SDP header and parity bytes into a buffer - Use this buffer when writing the VSC SDP data in dp_catalog_panel_send_vsc_sdp() - Write to all of the MMSS_DP_GENERIC0 registers instead of just the ones with non-zero values Changes in v3: - Create a new struct, msm_dp_sdp_with_parity, which holds the packing information for VSC SDP - Use drm_dp_vsc_sdp_pack() to pack the data into the new msm_dp_sdp_with_parity struct instead of specifically packing for YUV420 format - Modify dp_catalog_panel_send_vsc_sdp() to send the VSC SDP data using the new msm_dp_sdp_with_parity struct Changes in v2: - Rename GENERIC0_SDPSIZE macro to GENERIC0_SDPSIZE_VALID - Remove dp_sdp from the dp_catalog struct since this data is being allocated at the point used - Create a new function in dp_utils to pack the VSC SDP data into a buffer - Create a new function that packs the SDP header bytes into a buffer. This function is made generic so that it can be utilized by dp_audio header bytes into a buffer - Create a new function in dp_utils that takes the packed buffer and writes to the DP_GENERIC0_* registers - Split the dp_catalog_panel_config_vsc_sdp() function into two to disable/enable sending VSC SDP packets - Check the DP HW version using the original useage of dp_catalog_hw_revision() and correct the version checking logic - Rename dp_panel_setup_vsc_sdp() to dp_panel_setup_vsc_sdp_yuv_420() to explicitly state that currently VSC SDP is only being set up to support YUV420 modes Signed-off-by:
-
Paloma Arellano authored
Parity calculation is necessary for VSC SDP implementation. Therefore create new files dp_utils.c and dp_utils.h and move the parity calculating functions here. This ensures that they are usable by SDP programming in both dp_catalog.c and dp_audio.c Changes in v3: - Change ordering of the header byte macros Changes in v2: - Create new files dp_utils.c and dp_utils.h - Move the parity calculation to these new files instead of having them in dp_catalog.c and dp_catalog.h Signed-off-by:
-
Paloma Arellano authored
Change all relevant DP controller related programming for YUV420 cases. Namely, change the pixel clock math to consider YUV420 and modify the MVID programming to consider YUV420. Changes in v2: - Move configuration control programming to a different commit - Slight code simplification - Add VSC SDP check when doing mode_pclk_khz division in dp_bridge_mode_valid Signed-off-by:
-
Paloma Arellano authored
Change relevant DP controller related programming for YUV420 cases. Program the configuration control register to indicate YUV420. Changes in v2: - Create a new patch only for configuration control programming Signed-off-by:
-
Paloma Arellano authored
Widebus enablement is decided by the interfaces based on their specific checks and that already happens with DSI/DP specific helpers. Let's invoke these helpers from dpu_encoder_is_widebus_enabled() to make it cleaner overall. Signed-off-by:
-
Paloma Arellano authored
In the DP driver, check if VSC SDP is supported and propagate this value to dp_panel. In dp_display's dp_mode, the out_fmt_is_yuv_420 parameter must also utilize this value since YUV420 is only allowed when VSC SDP is supported. Changes in v2: - Move DP programming when VSC SDP is supported to this patch Signed-off-by:
-
Paloma Arellano authored
Wide bus is not supported when the mode is YUV420 in DP. In preparation for changing the DPU programming to reflect this, the value and assignment location of wide_bus_en for the DP submodules must be changed. Move it from boot time in dp_init_sub_modules() to run time in dp_display_mode_set. Signed-off-by:
-
Paloma Arellano authored
Rename wide_bus_en to wide_bus_supported in dp_display_private to correctly establish that the parameter is referencing if wide bus is supported instead of enabled. Signed-off-by:
-
Paloma Arellano authored
Move dpu_encoder_helper_phys_setup_cdm to dpu_encoder in preparation for implementing YUV420 over DP, which requires CDM compatibility. Changes in v2: - Slightly change the wording of the commit text to make clear that YUV over DP requires CDM Signed-off-by:
-
Paloma Arellano authored
Generalize dpu_encoder_helper_phys_setup_cdm to be compatible with DP. Changes in v2: - Minor formatting changes - Move the modification of the dimensions for CDM setup to a new patch Signed-off-by:
-
Paloma Arellano authored
Modify the output width and height parameters of hw_cdm to utilize the physical encoder's data instead of obtaining the information from the framebuffer. CDM is to be set up to utilize the actual output data since at CDM setup, there is no difference between the two sources. Changes in v2: - Move the modification of the dimensions for CDM setup to this new patch Signed-off-by:
-
Paloma Arellano authored
Setting up the timing engine when the physical encoder has a split role neglects dividing the drm_display_mode's hskew parameter. Let's fix this since this must also be done in preparation for implementing YUV420 over DP. Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
-
Paloma Arellano authored
CDM block supports formats other than H1V2 for DP. Since we are now adding support for CDM over DP, relax the checks to allow all other formats for DP other than H1V2. Changes in v2: - Add fixes tag - Move patch to top of series Fixes: 0afac0ba ("drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block") Signed-off-by:
-
Rob Clark authored
Merge to pick up commit 47f419e0 ("drm/dp: move intel_dp_vsc_sdp_pack() to generic helper") drm-misc-next for v6.9: UAPI Changes: Cross-subsystem Changes: backlight: - corgi: include backlight header fbdev: - Cleanup includes in public header file - fbtft: Include backlight header Core Changes: edid: - Remove built-in EDID data dp: - Avoid AUX transfers on powered-down displays - Add VSC SDP helpers modesetting: - Add sanity checks for polling - Cleanups scheduler: - Cleanups tests: - Add helpers for mode-setting tests Driver Changes: i915: - Use shared VSC SDP helper mgag200: - Work around PCI write bursts mxsfb: - Use managed mode config nouveau: - Include backlight header where necessary qiac: - Cleanups sun4: - HDMI: updates to atomic mode setting tegra: - Fix GEM refounting in error paths tidss: - Fix multi display - Fix initial Z position v3d: - Support display MMU page size Signed-off-by:
Rob Clark <robdclark@chromium.org>
-
- 28 Feb, 2024 10 commits
-
-
Douglas Anderson authored
If an eDP panel is not powered on then any attempts to talk to it over the DP AUX channel will timeout. Unfortunately these attempts may be quite slow. Userspace can initiate these attempts either via a /dev/drm_dp_auxN device or via the created i2c device. Making the DP AUX drivers timeout faster is a difficult proposition. In theory we could just poll the panel's HPD line in the AUX transfer function and immediately return an error there. However, this is easier said than done. For one thing, there's no hard requirement to hook the HPD line up for eDP panels and it's OK to just delay a fixed amount. For another thing, the HPD line may not be fast to probe. On parade-ps8640 we need to wait for the bridge chip's firmware to boot before we can get the HPD line and this is a slow process. The fact that the transfers are taking so long to timeout is causing real problems. The open source fwupd daemon sometimes scans DP busses looking for devices whose firmware need updating. If it happens to scan while a panel is turned off this scan can take a long time. The fwupd daemon could try to be smarter and only scan when eDP panels are turned on, but we can also improve the behavior in the kernel. Let's let eDP panels drivers specify that a panel is turned off and then modify the common AUX transfer code not to attempt a transfer in this case. Tested-by:
Steev Klimaszewski <steev@kali.org> Reviewed-by:
Hsin-Yi Wang <hsinyi@chromium.org> Tested-by:
Eizan Miyamoto <eizan@chromium.org> Acked-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
-
Maxime Ripard authored
drmm_connector_init is the preferred function to initialize a drm_connector structure. Let's add a bunch of unit tests for it. Reviewed-by:
Maíra Canal <mcanal@igalia.com> Signed-off-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-5-8f4af575fce2@kernel.org
-
Maxime Ripard authored
We're going to need a full-blown, functional, KMS device to test more components of the atomic modesetting infrastructure. Let's add a new helper to create a dumb, mocked, CRTC. By default it will create a CRTC relying only on the default helpers, but drivers are free to deviate from that. Reviewed-by:
-
Maxime Ripard authored
We're going to need a full-blown, functional, KMS device to test more components of the atomic modesetting infrastructure. Let's add a new helper to create a dumb, mocked, primary plane. By default, it will create a linear XRGB8888 plane, using the default helpers. Reviewed-by:
-
Maxime Ripard authored
The mock device we were creating was missing any of the driver-wide helpers. That was fine before since we weren't testing the atomic state path, but we're going to start, so let's use the default implementations. Reviewed-by:
-
Maxime Ripard authored
We have a few functions declared in our kunit helpers header, some of them dereferencing the struct drm_driver. However, we don't include the drm_drv.h header file defining that structure, leading to compilation errors if we don't include both headers. Fixes: d9878031 ("drm/tests: helpers: Allow to pass a custom drm_driver") Reviewed-by:
-
Kunwu Chan authored
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create to simplify the creation of SLAB caches. Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240221085558.166774-1-chentao@kylinos.cn
-
Shradha Gupta authored
In function drm_helper_probe_single_connector_modes() when we enable polling again, if it is already uninitialized, a warning is reported. This patch fixes the warning message by checking if poll is initialized before enabling it. Reported-by:
kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202401191128.db8423f1-oliver.sang@intel.comSigned-off-by:
Shradha Gupta <shradhagupta@linux.microsoft.com> Signed-off-by:
-
Shradha Gupta authored
In drm_kms_helper_poll_disable() check if output polling support is initialized before disabling polling. If not flag this as a warning. Additionally in drm_mode_config_helper_suspend() and drm_mode_config_helper_resume() calls, that re the callers of these functions, avoid invoking them if polling is not initialized. For drivers like hyperv-drm, that do not initialize connector polling, if suspend is called without this check, it leads to suspend failure with following stack [ 770.719392] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 770.720592] printk: Suspending console(s) (use no_console_suspend to debug) [ 770.948823] ------------[ cut here ]------------ [ 770.948824] WARNING: CPU: 1 PID: 17197 at kernel/workqueue.c:3162 __flush_work.isra.0+0x212/0x230 [ 770.948831] Modules linked in: rfkill nft_counter xt_conntrack xt_owner udf nft_compat crc_itu_t nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink vfat fat mlx5_ib ib_uverbs ib_core mlx5_core intel_rapl_msr intel_rapl_common kvm_amd ccp mlxfw kvm psample hyperv_drm tls drm_shmem_helper drm_kms_helper irqbypass pcspkr syscopyarea sysfillrect sysimgblt hv_balloon hv_utils joydev drm fuse xfs libcrc32c pci_hyperv pci_hyperv_intf sr_mod sd_mod cdrom t10_pi sg hv_storvsc scsi_transport_fc hv_netvsc serio_raw hyperv_keyboard hid_hyperv crct10dif_pclmul crc32_pclmul crc32c_intel hv_vmbus ghash_clmulni_intel dm_mirror dm_region_hash dm_log dm_mod [ 770.948863] CPU: 1 PID: 17197 Comm: systemd-sleep Not tainted 5.14.0-362.2.1.el9_3.x86_64 #1 [ 770.948865] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 05/09/2022 [ 770.948866] RIP: 0010:__flush_work.isra.0+0x212/0x230 [ 770.948869] Code: 8b 4d 00 4c 8b 45 08 89 ca 48 c1 e9 04 83 e2 08 83 e1 0f 83 ca 02 89 c8 48 0f ba 6d 00 03 e9 25 ff ff ff 0f 0b e9 4e ff ff ff <0f> 0b 45 31 ed e9 44 ff ff ff e8 8f 89 b2 00 66 66 2e 0f 1f 84 00 [ 770.948870] RSP: 0018:ffffaf4ac213fb10 EFLAGS: 00010246 [ 770.948871] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8c992857 [ 770.948872] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff9aad82b00330 [ 770.948873] RBP: ffff9aad82b00330 R08: 0000000000000000 R09: ffff9aad87ee3d10 [ 770.948874] R10: 0000000000000200 R11: 0000000000000000 R12: ffff9aad82b00330 [ 770.948874] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001 [ 770.948875] FS: 00007ff1b2f6bb40(0000) GS:ffff9aaf37d00000(0000) knlGS:0000000000000000 [ 770.948878] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 770.948878] CR2: 0000555f345cb666 CR3: 00000001462dc005 CR4: 0000000000370ee0 [ 770.948879] Call Trace: [ 770.948880] <TASK> [ 770.948881] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948884] ? show_trace_log_lvl+0x1c4/0x2df [ 770.948886] ? __cancel_work_timer+0x103/0x190 [ 770.948887] ? __flush_work.isra.0+0x212/0x230 [ 770.948889] ? __warn+0x81/0x110 [ 770.948891] ? __flush_work.isra.0+0x212/0x230 [ 770.948892] ? report_bug+0x10a/0x140 [ 770.948895] ? handle_bug+0x3c/0x70 [ 770.948898] ? exc_invalid_op+0x14/0x70 [ 770.948899] ? asm_exc_invalid_op+0x16/0x20 [ 770.948903] ? __flush_work.isra.0+0x212/0x230 [ 770.948905] __cancel_work_timer+0x103/0x190 [ 770.948907] ? _raw_spin_unlock_irqrestore+0xa/0x30 [ 770.948910] drm_kms_helper_poll_disable+0x1e/0x40 [drm_kms_helper] [ 770.948923] drm_mode_config_helper_suspend+0x1c/0x80 [drm_kms_helper] [ 770.948933] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948942] hyperv_vmbus_suspend+0x17/0x40 [hyperv_drm] [ 770.948944] ? __pfx_vmbus_suspend+0x10/0x10 [hv_vmbus] [ 770.948951] dpm_run_callback+0x4c/0x140 [ 770.948954] __device_suspend_noirq+0x74/0x220 [ 770.948956] dpm_noirq_suspend_devices+0x148/0x2a0 [ 770.948958] dpm_suspend_end+0x54/0xe0 [ 770.948960] create_image+0x14/0x290 [ 770.948963] hibernation_snapshot+0xd6/0x200 [ 770.948964] hibernate.cold+0x8b/0x1fb [ 770.948967] state_store+0xcd/0xd0 [ 770.948969] kernfs_fop_write_iter+0x124/0x1b0 [ 770.948973] new_sync_write+0xff/0x190 [ 770.948976] vfs_write+0x1ef/0x280 [ 770.948978] ksys_write+0x5f/0xe0 [ 770.948979] do_syscall_64+0x5c/0x90 [ 770.948981] ? syscall_exit_work+0x103/0x130 [ 770.948983] ? syscall_exit_to_user_mode+0x12/0x30 [ 770.948985] ? do_syscall_64+0x69/0x90 [ 770.948986] ? do_syscall_64+0x69/0x90 [ 770.948987] ? do_user_addr_fault+0x1d6/0x6a0 [ 770.948989] ? do_syscall_64+0x69/0x90 [ 770.948990] ? exc_page_fault+0x62/0x150 [ 770.948992] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 770.948995] RIP: 0033:0x7ff1b293eba7 [ 770.949010] Code: 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 770.949011] RSP: 002b:00007ffde3912128 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 770.949012] RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007ff1b293eba7 [ 770.949013] RDX: 0000000000000005 RSI: 00007ffde3912210 RDI: 0000000000000004 [ 770.949014] RBP: 00007ffde3912210 R08: 000055d7dd4c9510 R09: 00007ff1b29b14e0 [ 770.949014] R10: 00007ff1b29b13e0 R11: 0000000000000246 R12: 0000000000000005 [ 770.949015] R13: 000055d7dd4c53e0 R14: 0000000000000005 R15: 00007ff1b29f69e0 [ 770.949016] </TASK> [ 770.949017] ---[ end trace e6fa0618bfa2f31d ]--- Built-on: Rhel9, Ubuntu22 Signed-off-by:
-
Thierry Reding authored
The drm_num_crtcs() helper determines the number of CRTCs by iterating over the list of CRTCs that have been registered with the mode config. However, we already keep track of that number in the mode config's num_crtcs field, so we can simply retrieve the value from that and remove the extra helper function. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240227112038.411846-1-thierry.reding@gmail.com
-
