- 06 Feb, 2015 6 commits
-
-
Ahmed S. Darwish authored
commit e638642b upstream. While being in an ERROR_WARNING state, and receiving further bus error events with error counters still in the ERROR_WARNING range of 97-127 inclusive, the state handling code erroneously reverts back to ERROR_ACTIVE. Per the CAN standard, only revert to ERROR_ACTIVE when the error counters are less than 96. Moreover, in certain Kvaser models, the BUS_ERROR flag is always set along with undefined bits in the M16C status register. Thus use bitwise operators instead of full equality for checking that register against bus errors. Signed-off-by:
Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ahmed S. Darwish authored
commit 14c10c2a upstream. On some x86 laptops, plugging a Kvaser device again after an unplug makes the firmware always ignore the very first command. For such a case, provide some room for retries instead of completely exiting the driver init code. Signed-off-by:
-
Ahmed S. Darwish authored
commit 3803fa69 upstream. Send expected argument to the URB completion hander: a CAN netdevice instead of the network interface private context `kvaser_usb_net_priv'. This was discovered by having some garbage in the kernel log in place of the netdevice names: can0 and can1. Signed-off-by:
-
Ahmed S. Darwish authored
commit ded50066 upstream. Upon receiving a hardware event with the BUS_RESET flag set, the driver kills all of its anchored URBs and resets all of its transmit URB contexts. Unfortunately it does so under the context of URB completion handler `kvaser_usb_read_bulk_callback()', which is often called in an atomic context. While the device is flooded with many received error packets, usb_kill_urb() typically sleeps/reschedules till the transfer request of each killed URB in question completes, leading to the sleep in atomic bug. [3] In v2 submission of the original driver patch [1], it was stated that the URBs kill and tx contexts reset was needed since we don't receive any tx acknowledgments later and thus such resources will be locked down forever. Fortunately this is no longer needed since an earlier bugfix in this patch series is now applied: all tx URB contexts are reset upon CAN channel close. [2] Moreover, a BUS_RESET is now treated _exactly_ like a BUS_OFF event, which is the recommended handling method advised by the device manufacturer. [1] http://article.gmane.org/gmane.linux.network/239442 http://www.webcitation.org/6Vr2yagAQ [2] can: kvaser_usb: Reset all URB tx contexts upon channel close 889b77f7 [3] Stacktrace: <IRQ> [<ffffffff8158de87>] dump_stack+0x45/0x57 [<ffffffff8158b60c>] __schedule_bug+0x41/0x4f [<ffffffff815904b1>] __schedule+0x5f1/0x700 [<ffffffff8159360a>] ? _raw_spin_unlock_irqrestore+0xa/0x10 [<ffffffff81590684>] schedule+0x24/0x70 [<ffffffff8147d0a5>] usb_kill_urb+0x65/0xa0 [<ffffffff81077970>] ? prepare_to_wait_event+0x110/0x110 [<ffffffff8147d7d8>] usb_kill_anchored_urbs+0x48/0x80 [<ffffffffa01f4028>] kvaser_usb_unlink_tx_urbs+0x18/0x50 [kvaser_usb] [<ffffffffa01f45d0>] kvaser_usb_rx_error+0xc0/0x400 [kvaser_usb] [<ffffffff8108b14a>] ? vprintk_default+0x1a/0x20 [<ffffffffa01f5241>] kvaser_usb_read_bulk_callback+0x4c1/0x5f0 [kvaser_usb] [<ffffffff8147a73e>] __usb_hcd_giveback_urb+0x5e/0xc0 [<ffffffff8147a8a1>] usb_hcd_giveback_urb+0x41/0x110 [<ffffffffa0008748>] finish_urb+0x98/0x180 [ohci_hcd] [<ffffffff810cd1a7>] ? acct_account_cputime+0x17/0x20 [<ffffffff81069f65>] ? local_clock+0x15/0x30 [<ffffffffa000a36b>] ohci_work+0x1fb/0x5a0 [ohci_hcd] [<ffffffff814fbb31>] ? process_backlog+0xb1/0x130 [<ffffffffa000cd5b>] ohci_irq+0xeb/0x270 [ohci_hcd] [<ffffffff81479fc1>] usb_hcd_irq+0x21/0x30 [<ffffffff8108bfd3>] handle_irq_event_percpu+0x43/0x120 [<ffffffff8108c0ed>] handle_irq_event+0x3d/0x60 [<ffffffff8108ec84>] handle_fasteoi_irq+0x74/0x110 [<ffffffff81004dfd>] handle_irq+0x1d/0x30 [<ffffffff81004727>] do_IRQ+0x57/0x100 [<ffffffff8159482a>] common_interrupt+0x6a/0x6a Signed-off-by:
-
Zidan Wang authored
commit 22ee76da upstream. wm8960 codec can't support sample rate 11250, it must be 11025. Signed-off-by:
Zidan Wang <b50113@freescale.com> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Andy Shevchenko authored
commit 67bf9cda upstream. The FIFO size is 40 accordingly to the specifications, but this means 0x40, i.e. 64 bytes. This patch fixes the typo and enables FIFO size autodetection for Intel MID devices. Fixes: 7063c0d9 (spi/dw_spi: add DMA support) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
- 30 Jan, 2015 32 commits
-
-
Greg Kroah-Hartman authored
-
NeilBrown authored
commit 108cef3a upstream. It is critical that fetch_block() and handle_stripe_dirtying() are consistent in their analysis of what needs to be loaded. Otherwise raid5 can wait forever for a block that won't be loaded. Currently when writing to a RAID5 that is resyncing, to a location beyond the resync offset, handle_stripe_dirtying chooses a reconstruct-write cycle, but fetch_block() assumes a read-modify-write, and a lockup can happen. So treat that case just like RAID6, just as we do in handle_stripe_dirtying. RAID6 always does reconstruct-write. This bug was introduced when the behaviour of handle_stripe_dirtying was changed in 3.7, so the patch is suitable for any kernel since, though it will need careful merging for some versions. Cc: stable@vger.kernel.org (v3.7+) Fixes: a7854487Reported-by:
Henry Cai <henryplusplus@gmail.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Jan Kara authored
commit 7d734532 upstream. reaim workfile.dbase test easily triggers warning in ext4_da_update_reserve_space(): EXT4-fs warning (device ram0): ext4_da_update_reserve_space:365: ino 12, allocated 1 with only 0 reserved metadata blocks (releasing 1 blocks with reserved 9 data blocks) The problem is that (one of) tests creates file and then randomly writes to it with O_SYNC. That results in writing back pages of the file in random order so we create extents for written blocks say 0, 2, 4, 6, 8 - this last allocation also allocates new block for extents. Then we writeout block 1 so we have extents 0-2, 4, 6, 8 and we release indirect extent block because extents fit in the inode again. Then we writeout block 10 and we need to allocate indirect extent block again which triggers the warning because we don't have the reservation anymore. Fix the problem by giving back freed metadata blocks resulting from extent merging into inode's reservation pool. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Josh Hunt <johunt@akamai.com> Signed-off-by:
-
Jan Kara authored
commit 1c8924eb upstream. ext4 needs to convert allocated (metadata) blocks back into blocks reserved for delayed allocation. Add functions into quota code for supporting such operation. Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Cc: Josh Hunt <johunt@akamai.com> Signed-off-by:
-
Mathias Krause authored
commit 3e14dcf7 upstream. Commit 5d26a105 ("crypto: prefix module autoloading with "crypto-"") changed the automatic module loading when requesting crypto algorithms to prefix all module requests with "crypto-". This requires all crypto modules to have a crypto specific module alias even if their file name would otherwise match the requested crypto algorithm. Even though commit 5d26a105 added those aliases for a vast amount of modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO annotations to those files to make them get loaded automatically, again. This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work with kernels v3.18 and below. Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former won't work for crypto modules any more. Fixes: 5d26a105 ("crypto: prefix module autoloading with "crypto-"") Cc: Kees Cook <keescook@chromium.org> Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Kees Cook authored
commit 4943ba16 upstream. This adds the module loading prefix "crypto-" to the template lookup as well. For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly includes the "crypto-" prefix at every level, correctly rejecting "vfat": net-pf-38 algif-hash crypto-vfat(blowfish) crypto-vfat(blowfish)-all crypto-vfat Reported-by:
Kees Cook <keescook@chromium.org> Acked-by:
-
Kees Cook authored
commit 5d26a105 upstream. This prefixes all crypto module loading with "crypto-" so we never run the risk of exposing module auto-loading to userspace via a crypto API, as demonstrated by Mathias Krause: https://lkml.org/lkml/2013/3/4/70Signed-off-by:
-
Lars Ellenberg authored
commit 3b9d35d7 upstream. This was not noticed for many years. Affects operation if md raid is used a backing device for DRBD. CC: stable@kernel.org # v3.2+ Signed-off-by:
Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
David Vrabel authored
commit dbdd7476 upstream. This reverts commit 2c3fc8d2. This commit broke on x86 PV because entries in the generic SWIOTLB are indexed using (pseudo-)physical address not DMA address and these are not the same in a x86 PV guest. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reviewed-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
Dan Carpenter authored
commit 3b05ac38 upstream. The app_tcp_pkt_out() function expects "*diff" to be set and ends up using uninitialized data if CONFIG_IP_VS_IPV6 is turned on. The same issue is there in app_tcp_pkt_in(). Thanks to Julian Anastasov for noticing that. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Sasha Levin authored
commit a3a87844 upstream. When a key is being garbage collected, it's key->user would get put before the ->destroy() callback is called, where the key is removed from it's respective tracking structures. This leaves a key hanging in a semi-invalid state which leaves a window open for a different task to try an access key->user. An example is find_keyring_by_name() which would dereference key->user for a key that is in the process of being garbage collected (where key->user was freed but ->destroy() wasn't called yet - so it's still present in the linked list). This would cause either a panic, or corrupt memory. Fixes CVE-2014-9529. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Andy Shevchenko authored
commit 4aaa7187 upstream. DMA mapped IO should be unmapped on the error path in probe() and unconditionally on remove(). Fixes: 62936009 ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex) Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 7ddc6a21 upstream. These functions can be executed on the int3 stack, so kprobes are dangerous. Tracing is probably a bad idea, too. Fixes: b645af2d ("x86_64, traps: Rework bad_iret") Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/50e33d26adca60816f3ba968875801652507d0c4.1416870125.git.luto@amacapital.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.10: - Use __kprobes instead of NOKPROBE_SYMBOL() - Adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Andy Lutomirski authored
commit 3669ef9f upstream. The Witcher 2 did something like this to allocate a TLS segment index: struct user_desc u_info; bzero(&u_info, sizeof(u_info)); u_info.entry_number = (uint32_t)-1; syscall(SYS_set_thread_area, &u_info); Strictly speaking, this code was never correct. It should have set read_exec_only and seg_not_present to 1 to indicate that it wanted to find a free slot without putting anything there, or it should have put something sensible in the TLS slot if it wanted to allocate a TLS entry for real. The actual effect of this code was to allocate a bogus segment that could be used to exploit espfix. The set_thread_area hardening patches changed the behavior, causing set_thread_area to return -EINVAL and crashing the game. This changes set_thread_area to interpret this as a request to find a free slot and to leave it empty, which isn't *quite* what the game expects but should be close enough to keep it working. In particular, using the code above to allocate two segments will allocate the same segment both times. According to FrostbittenKing on Github, this fixes The Witcher 2. If this somehow still causes problems, we could instead allocate a limit==0 32-bit data segment, but that seems rather ugly to me. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Andy Lutomirski authored
commit e30ab185 upstream. 32-bit programs don't have an lm bit in their ABI, so they can't reliably cause LDT_empty to return true without resorting to memset. They shouldn't need to do this. This should fix a longstanding, if minor, issue in all 64-bit kernels as well as a potential regression in the TLS hardening code. Fixes: 41bdc785 x86/tls: Validate TLS entries to protect espfix Signed-off-by:
-
Alexandre Demers authored
commit 52045217 upstream. Many users see this message when booting without knowning that it is of no importance and that TSC calibration may have succeeded by another way. As explained by Paul Bolle in http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein "Fast TSC calibration failed" should not be considered as an error since other calibration methods are being tried afterward. At most, those send a warning if they fail (not an error). So let's change the message from error to warning. [ tglx: Make if pr_info. It's really not important at all ] Fixes: c767a54b x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level> Signed-off-by:
Alexandre Demers <alexandre.f.demers@gmail.com> Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.comSigned-off-by:
-
K. Y. Srinivasan authored
commit 32c6590d upstream. The Hyper-V clocksource is continuous; mark it accordingly. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Acked-by: jasowang@redhat.com Cc: gregkh@linuxfoundation.org Cc: devel@linuxdriverproject.org Cc: olaf@aepfle.de Cc: apw@canonical.com Link: http://lkml.kernel.org/r/1421108762-3331-1-git-send-email-kys@microsoft.comSigned-off-by:
-
Tobias Jakobi authored
commit 8c38d28b upstream. EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask produces a number outside the range 0x00 to 0xff, which always results in execution of the default switch statement. Obviously this is wrong and git history shows that the bitmask inversion was incorrectly set during a refactoring of the MCT code. Fix this by putting the inversion at the correct position again. Acked-by:
Kukjin Kim <kgene.kim@samsung.com> Reported-by:
GP Orcullo <kinsamanka@gmail.com> Reviewed-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Oliver Hartkopp authored
commit 9b1087aa upstream. When changing flags in the CAN drivers ctrlmode the provided new content has to be checked whether the bits are allowed to be changed. The bits that are to be changed are given as a bitfield in cm->mask. Therefore checking against cm->flags is wrong as the content can hold any kind of values. The iproute2 tool sets the bits in cm->mask and cm->flags depending on the detected command line options. To be robust against bogus user space applications additionally sanitize the provided flags with the provided mask. Cc: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Andrew Lunn authored
commit 38bdf45f upstream. On Armada XP, 375 and 38x the MBus window 13 has the remap capability, like windows 0 to 7. However, the mvebu-mbus driver isn't currently taking into account this special case, which means that when window 13 is actually used, the remap registers are left to 0, making the device using this MBus window unavailable. As a minimal fix for stable, don't use window 13. A full fix will follow later. Fixes: fddddb52 ("bus: introduce an Marvell EBU MBus driver") Reviewed-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Fabio Estevam authored
commit 7ecd0bde upstream. Currently PWM functionality is broken on mx25 due to the wrong assignment of the PWM "per" clock. According to Documentation/devicetree/bindings/clock/imx25-clock.txt: pwm_ipg_per 52 ,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock. With this change PWM can work fine on mx25. Reported-by:
Carlos Soto <csotoalonso@gmail.com> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Sasha Levin authored
commit 5e5aeb43 upstream. Verify that the frequency value from userspace is valid and makes sense. Unverified values can cause overflows later on. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Sasha Levin authored
commit 6ada1fc0 upstream. An unvalidated user input is multiplied by a constant, which can result in an undefined behaviour for large values. While this is validated later, we should avoid triggering undefined behaviour. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Joe Thornber authored
commit 9b1cc9f2 upstream. If a DM table is reloaded with an inactive table when the device is not suspended (normal procedure for LVM2), then there will be two dm-bufio objects that can diverge. This can lead to a situation where the inactive table uses bufio to read metadata at the same time the active table writes metadata -- resulting in the inactive table having stale metadata buffers once it is promoted to the active table slot. Fix this by using reference counting and a global list of cache metadata objects to ensure there is only one metadata object per metadata device. Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Brian King authored
commit 6cdb0817 upstream. Fixes a race condition in abort handling that was injected when multiple interrupt support was added. When only a single interrupt is present, the adapter guarantees it will send responses for aborted commands prior to the response for the abort command itself. With multiple interrupts, these responses generally come back on different interrupts, so we need to ensure the abort thread waits until the aborted command is complete so we don't perform a double completion. This race condition was being hit frequently in environments which were triggering command timeouts, which was resulting in a double completion causing a kernel oops. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Wendy Xiong <wenxiong@linux.vnet.ibm.com> Tested-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Chris Wilson authored
commit 226e5ae9 upstream. If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared if the mutex debugging is enabled which introduces a race in our mutex_is_locked_by() - i.e. we may inspect the old owner value before it is acquired by the new task. This is the root cause of this error: # diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c # index 5cf6731..3ef3736 100644 # --- a/kernel/locking/mutex-debug.c # +++ b/kernel/locking/mutex-debug.c # @@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock) # DEBUG_LOCKS_WARN_ON(lock->owner != current); # # DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next); # - mutex_clear_owner(lock); # } # # /* # * __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug # * mutexes so that we can do it here after we've verified state. # */ # + mutex_clear_owner(lock); # atomic_set(&lock->count, 1); # } Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Michael Karcher authored
commit 1caf6aaa upstream. Compiling SH with gcc-4.8 fails due to the -m32 option not being supported. From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783 CC init/main.o gcc-4.8: error: unrecognized command line option '-m32' ld: cannot find init/.tmp_mc_main.o: No such file or directory objcopy: 'init/.tmp_mx_main.o': No such file rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de Cc: Matt Fleming <matt@console-pimps.org> Reported-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by:
Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Jason Lee Cragg authored
commit 64559311 upstream. Signed-off-by:
Jason Lee Cragg <jcragg@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Jeffery authored
commit ce751452 upstream. It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG(). This problem is hard to reproduce making this patch hard to verify, but this fix will prevent the race. I have not been able to reproduce the problem, but here is a crash dump from a 2.6.32 kernel. On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE: crash> struct ata_port.hsm_task_state ffff881c1121c000 hsm_task_state = 0 Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(), which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value. PID: 11053 TASK: ffff8816e846cae0 CPU: 0 COMMAND: "sshd" #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510 #3 [ffff88008ba03ac0] die at ffffffff81010e0b #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b [exception RIP: ata_sff_hsm_move+317] RIP: ffffffff813a77ad RSP: ffff88008ba03ca0 RFLAGS: 00010097 RAX: 0000000000000000 RBX: ffff881c1121dc60 RCX: 0000000000000000 RDX: ffff881c1121dd10 RSI: ffff881c1121dc60 RDI: ffff881c1121c000 RBP: ffff88008ba03d00 R8: 0000000000000000 R9: 000000000000002e R10: 000000000001003f R11: 000000000000009b R12: ffff881c1121c000 R13: 0000000000000000 R14: 0000000000000050 R15: ffff881c1121dd78 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
-
Jim Lin authored
commit db93facf upstream. This patch is to fix two deadlock cases. Deadlock 1: CPU #1 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #0 pinctrl_unregister (Holding lock pinctrldev_list_mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) Simply to say CPU#1 is holding lock A and trying to acquire lock B, CPU#0 is holding lock B and trying to acquire lock A. Deadlock 2: CPU #3 pinctrl_register-> pinctrl_get -> create_pinctrl (Holding lock pinctrl_maps_mutex) -> get_pinctrl_dev_from_devname (Trying to acquire lock pinctrldev_list_mutex) CPU #2 pinctrl_unregister (Holding lock pctldev->mutex) -> pinctrl_put ->> pinctrl_free -> pinctrl_dt_free_maps -> pinctrl_unregister_map (Trying to acquire lock pinctrl_maps_mutex) CPU #0 tegra_gpio_request (Holding lock pinctrldev_list_mutex) -> pinctrl_get_device_gpio_range (Trying to acquire lock pctldev->mutex) Simply to say CPU#3 is holding lock A and trying to acquire lock D, CPU#2 is holding lock B and trying to acquire lock A, CPU#0 is holding lock D and trying to acquire lock B. Signed-off-by:
Jim Lin <jilin@nvidia.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 0915e6fe upstream. The gpio device attributes were never destroyed when the gpio was unexported (or on export failures). Use device_create_with_groups() to create the default device attributes of the gpio class device. Note that this also fixes the attribute-creation race with userspace for these attributes. Remove contingent attributes in export error path and on unexport. Fixes: d8f388d8 ("gpio: sysfs interface") Cc: stable <stable@vger.kernel.org> # v2.6.27+ Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 121b6a79 upstream. The gpio-chip device attributes were never destroyed when the device was removed. Fix by using device_create_with_groups() to create the device attributes of the chip class device. Note that this also fixes the attribute-creation race with userspace. Fixes: d8f388d8 ("gpio: sysfs interface") Signed-off-by:
-
- 27 Jan, 2015 2 commits
-
-
Greg Kroah-Hartman authored
-
Martin Schwidefsky authored
commit e512d56c upstream. git commit 37f81fa1 "n_tty: do O_ONLCR translation as a single write" surfaced a bug in the 3215 device driver. In combination this broke tab expansion for tty ouput. The cause is an asymmetry in the behaviour of tty3215_ops->write vs tty3215_ops->put_char. The put_char function scans for '\t' but the write function does not. As the driver has logic for the '\t' expansion remove XTABS from c_oflag of the initial termios as well. Reported-by:
Stephen Powell <zlinuxman@wowway.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
