- 03 Aug, 2021 27 commits
-
-
Shai Malin authored
The device recovery flow will reset the entire HW device, in that case the DORQ HW block attention is redundant. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shai Malin authored
Avoid calling the qed doorbell recovery - qed_db_rec_handler() during device recovery. Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vasily Averin says: ==================== skbuff: introduce skb_expand_head() currently if skb does not have enough headroom skb_realloc_headrom is called. It is not optimal because it creates new skb. this patch set introduces new helper skb_expand_head() Unlike skb_realloc_headroom, it does not allocate a new skb if possible; copies skb->sk on new skb when as needed and frees original skb in case of failures. This helps to simplify ip[6]_finish_output2(), ip6_xmit() and few other functions in vrf, ax25 and bpf. There are few other cases where this helper can be used but it requires an additional investigations. v3 changes: - ax25 compilation warning fixed - v5.14-rc4 rebase - now it does not depend on non-committed pathces v2 changes: - helper's name was changed to skb_expand_head - fixed few mistakes inside skb_expand_head(): skb_set_owner_w should set sk on nskb kfree was replaced by kfree_skb() improved warning message - added minor refactoring in changed functions in vrf and bpf patches - removed kfree_skb() in ax25_rt_build_path caller ax25_ip_xmit ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
Unlike skb_realloc_headroom, new helper skb_expand_head does not allocate a new skb if possible. Additionally this patch replaces commonly used dereferencing with variables. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
Use skb_expand_head() in ax25_transmit_buffer and ax25_rt_build_path. Unlike skb_realloc_headroom, new helper does not allocate a new skb if possible. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
Unlike skb_realloc_headroom, new helper skb_expand_head does not allocate a new skb if possible. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
Unlike skb_realloc_headroom, new helper skb_expand_head does not allocate a new skb if possible. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
Unlike skb_realloc_headroom, new helper skb_expand_head does not allocate a new skb if possible. Additionally this patch replaces commonly used dereferencing with variables. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
Unlike skb_realloc_headroom, new helper skb_expand_head does not allocate a new skb if possible. Additionally this patch replaces commonly used dereferencing with variables. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vasily Averin authored
Like skb_realloc_headroom(), new helper increases headroom of specified skb. Unlike skb_realloc_headroom(), it does not allocate a new skb if possible; copies skb->sk on new skb when as needed and frees original skb in case of failures. This helps to simplify ip[6]_finish_output2() and a few other similar cases. Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== This patch-set changes the TTC (Traffic Type Classification) logic to be independent from the mlx5 ethernet driver by renaming the traffic types enums and making the TTC API generic to the mlx5 core driver. It allows to decouple TTC logic from mlx5e and reused by other parts of mlx5 drivers, namely ADQ and lag TX steering hashing. Patches overview: 1 - Rename traffic type enums to be mlx5 generic. 2 - Rename related TTC arguments and functions. 3 - Remove dependency in the mlx5e driver from the TTC implementation. 4 - Move TTC logic to fs_ttc. 5 - Embed struct mlx5_ttc_table in fs_ttc. The refactoring series is followed by misc' cleanup patches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiapeng Chong authored
The return value is missing in this code scenario, add the return value '0' to the return value 'err'. Eliminate the follow smatch warning: drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:3083 mlx5_devlink_eswitch_inline_mode_set() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 8e0aa4bc ("net/mlx5: E-switch, Protect eswitch mode changes") Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
Instead of returning -EINVAL. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
counter is being initialized before being used. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
Passing parse_attr is redundant in parse_tc_nic_actions() and mlx5e_tc_add_nic_flow() as we can get it from flow. This is the same as with parse_tc_fdb_actions() and mlx5e_tc_add_fdb_flow(). Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
The cap is very old and today will always exists. The cap is not being checked anywhere else. Remove the check from drop action when parsing tc rules in nic mode. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
filter_dev is saved in parse_attr. and being used in other cases from there. use it also for the leftover case. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Roi Dayan authored
Since the code changed to use the flow action infra there is no usage of tcf values from those includes. Remove those. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maor Gottlieb authored
mlx5_ttc_table struct shouldn't be exposed to the users so this patch make it internal to ttc. In addition add a getter function to get the TTC flow table for users that need to add a rule which points on it. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com>
-
Maor Gottlieb authored
Now that TTC logic is not dependent on mlx5e structs, move it to lib/fs_ttc.c so it could be used other part of the mlx5 driver. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maor Gottlieb authored
Remove dependency in the mlx5e driver from the TTC implementation by changing the TTC related functions to receive mlx5 generic arguments. It allows to decouple TTC logic from mlx5e and reused by other parts of mlx5 driver. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maor Gottlieb authored
Since TTC logic is going to be moved to a separate file, make the relevant functions and arguments that used by TTC to be mlx5 generic. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maor Gottlieb authored
Rename traffic type enums as part of the preparation for moving the traffic type logic to a separate file. Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maxim Mikityanskiy authored
The channels array in struct mlx5e_rx_res is converted to a dynamic one, which will use the dynamic value of max_nch instead of implementation-defined maximum of MLX5E_MAX_NUM_CHANNELS. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maxim Mikityanskiy authored
This commit moves all implementation details of struct mlx5e_rx_res under en/rx_res.c. All access to RX resources is now done using methods. Encapsulating RX resources into an object allows for better manageability, because all the implementation details are now in a single place, and external code can use only a limited set of API methods to init/teardown the whole thing, reconfigure RSS and LRO parameters, connect TIRs to flow steering and activate/deactivate TIRs. mlx5e_rx_res is self-contained and doesn't depend on struct mlx5e_priv or include en.h. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maxim Mikityanskiy authored
Currently, struct mlx5e_channels is defined in en.h, along with a lot of other stuff. In the following commit mlx5e_rx_res will need to get RQNs (RQ hardware IDs), given a pointer to mlx5e_channels and the channel index. In order to make it possible without including the whole en.h, this commit introduces functions that will hide the implementation details of mlx5e_channels. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
Maxim Mikityanskiy authored
Replace mlx5e_build_default_indir_rqt with a new initializer of struct mlx5e_rss_params_indir that works directly with the struct, rather than its internals. The new initializer is called mlx5e_rss_params_indir_init_uniform, which also reflects the purpose (uniform spreading) better. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-
- 02 Aug, 2021 13 commits
-
-
Colin Ian King authored
Don't populate the array states on the stack but instead it static const. Makes the object code smaller by 79 bytes. Before: text data bss dec hex filename 21309 8304 192 29805 746d drivers/net/ethernet/mellanox/mlx4/qp.o After: text data bss dec hex filename 21166 8368 192 29726 741e drivers/net/ethernet/mellanox/mlx4/qp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20210801153742.147304-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Don't populate the array if_names on the stack but instead it static const. Makes the object code smaller by 99 bytes. Before: text data bss dec hex filename 27886 10752 672 39310 998e ./drivers/net/ethernet/3com/3c509.o After: text data bss dec hex filename 27723 10816 672 39211 992b ./drivers/net/ethernet/3com/3c509.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801152650.146572-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Don't populate the array faf_bits on the stack but instead it static const. Makes the object code smaller by 175 bytes. Before: text data bss dec hex filename 9645 4552 0 14197 3775 ../freescale/dpaa2/dpaa2-eth-devlink.o After: text data bss dec hex filename 9406 4616 0 14022 36c6 ../freescale/dpaa2/dpaa2-eth-devlink.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801152209.146359-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Don't populate the array random_data on the stack but instead it static const. Makes the object code smaller by 66 bytes. Before: text data bss dec hex filename 52895 10976 0 63871 f97f ../qlogic/qlcnic/qlcnic_ethtool.o After: text data bss dec hex filename 52701 11104 0 63805 f93d ../qlogic//qlcnic/qlcnic_ethtool.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801151659.146113-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Don't populate the const array name on the stack but instead it static. Makes the object code smaller by 28 bytes. Add a missing const to clean up a checkpatch warning. Before: text data bss dec hex filename 124565 31565 384 156514 26362 drivers/net/ethernet/marvell/sky2.o After: text data bss dec hex filename 124441 31661 384 156486 26346 drivers/net/ethernet/marvell/sky2.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801150647.145728-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Don't populate the array match_all_mac on the stack but instead it static const. Makes the object code smaller by 75 bytes. Before: text data bss dec hex filename 46701 8960 64 55725 d9ad ../chelsio/cxgb4/cxgb4_filter.o After: text data bss dec hex filename 46338 9120 192 55650 d962 ../chelsio/cxgb4/cxgb4_filter.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801151205.145924-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
David Ahern authored
Ioana reported a refcount warning when booting over NFS: [ 5.042532] ------------[ cut here ]------------ [ 5.047184] refcount_t: addition on 0; use-after-free. [ 5.052324] WARNING: CPU: 7 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xa4/0x150 ... [ 5.167201] Call trace: [ 5.169635] refcount_warn_saturate+0xa4/0x150 [ 5.174067] fib_create_info+0xc00/0xc90 [ 5.177982] fib_table_insert+0x8c/0x620 [ 5.181893] fib_magic.isra.0+0x110/0x11c [ 5.185891] fib_add_ifaddr+0xb8/0x190 [ 5.189629] fib_inetaddr_event+0x8c/0x140 fib_treeref needs to be set after kzalloc. The old code had a ++ which led to the confusion when the int was replaced by a refcount_t. Fixes: 79976892 ("net: convert fib_treeref from int to refcount_t") Signed-off-by: David Ahern <dsahern@kernel.org> Reported-by: Ioana Ciornei <ciorneiioana@gmail.com> Cc: Yajun Deng <yajun.deng@linux.dev> Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20210802160221.27263-1-dsahern@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Don't populate arrays on the stack but instead them static const. Makes the object code smaller by 280 bytes. Before: text data bss dec hex filename 24142 4368 192 28702 701e ./drivers/net/phy/mscc/mscc_ptp.o After: text data bss dec hex filename 23830 4400 192 28422 6f06 ./drivers/net/phy/mscc/mscc_ptp.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801070155.139057-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Colin Ian King authored
Don't populate the array res_ids on the stack but instead it static const. Makes the object code smaller by 14 bytes. Before: text data bss dec hex filename 50833 8314 256 59403 e80b ./drivers/net/netdevsim/fib.o After: text data bss dec hex filename 50755 8378 256 59389 e7fd ./drivers/net/netdevsim/fib.o (gcc version 10.2.0) Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210801065328.138906-1-colin.king@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Gustavo A. R. Silva authored
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Use an anonymous union with a couple of anonymous structs in order to keep userspace unchanged: $ pahole -C ip_msfilter net/ipv4/ip_sockglue.o struct ip_msfilter { union { struct { __be32 imsf_multiaddr_aux; /* 0 4 */ __be32 imsf_interface_aux; /* 4 4 */ __u32 imsf_fmode_aux; /* 8 4 */ __u32 imsf_numsrc_aux; /* 12 4 */ __be32 imsf_slist[1]; /* 16 4 */ }; /* 0 20 */ struct { __be32 imsf_multiaddr; /* 0 4 */ __be32 imsf_interface; /* 4 4 */ __u32 imsf_fmode; /* 8 4 */ __u32 imsf_numsrc; /* 12 4 */ __be32 imsf_slist_flex[0]; /* 16 0 */ }; /* 0 16 */ }; /* 0 20 */ /* size: 20, cachelines: 1, members: 1 */ /* last cacheline: 20 bytes */ }; Also, refactor the code accordingly and make use of the struct_size() and flex_array_size() helpers. This helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy(). [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
No tagging driver uses this. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The nci_request() receives a callback function and unsigned long data argument "opt" which is passed to the callback. Almost all of the nci_request() callers pass pointer to a stack variable as data argument. Only few pass scalar value (e.g. u8). All such callbacks do not modify passed data argument and in previous commit they were made as const. However passing pointers via unsigned long removes the const annotation. The callback could simply cast unsigned long to a pointer to writeable memory. Use "const void *" as type of this "opt" argument to solve this and prevent modifying the pointed contents. This is also consistent with generic pattern of passing data arguments - via "void *". In few places which pass scalar values, use casts via "unsigned long" to suppress any warnings. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
-