- 28 Jul, 2014 3 commits
-
-
Benjamin Herrenschmidt authored
Bring in some important fixes from the 3.16 branch
-
Thomas Falcon authored
The function rtas_flash_firmware passes the address of a data structure, flash_block_list, when making the update-flash-64-and-reboot rtas call. While the endianness of the address is handled correctly, the endianness of the data is not. This patch ensures that the data in flash_block_list is big endian when passed to rtas on little endian hosts. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Vasant Hegde authored
We can continue to read the error log (up to MAX size) even if we get the elog size more than MAX size. Hence change BUG_ON to WARN_ON. Also updated error message. Reported-by:
Gopesh Kumar Chaudhary <gopchaud@in.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by:
Deepthi Dharwar <deepthi@linux.vnet.ibm.com> Acked-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
- 23 Jul, 2014 1 commit
-
-
Michael Ellerman authored
In the recent commit b50a6c58 "Clear MMCR2 when enabling PMU", I screwed up the handling of MMCR2 for tasks using EBB. We must make sure we set MMCR2 *before* ebb_switch_in(), otherwise we overwrite the value of MMCR2 that userspace may have written. That potentially breaks a task that uses EBB and manually uses MMCR2 for event freezing. Fixes: b50a6c58 ("powerpc/perf: Clear MMCR2 when enabling PMU") Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
- 22 Jul, 2014 5 commits
-
-
Li Zhong authored
memmove may be called from module code copy_pages(btrfs), and it may call memcpy, which may call back to C code, so it needs to use _GLOBAL_TOC to set up r2 correctly. This fixes following error when I tried to boot an le guest: Vector: 300 (Data Access) at [c000000073f97210] pc: c000000000015004: enable_kernel_altivec+0x24/0x80 lr: c000000000058fbc: enter_vmx_copy+0x3c/0x60 sp: c000000073f97490 msr: 8000000002009033 dar: d000000001d50170 dsisr: 40000000 current = 0xc0000000734c0000 paca = 0xc00000000fff0000 softe: 0 irq_happened: 0x01 pid = 815, comm = mktemp enter ? for help [c000000073f974f0] c000000000058fbc enter_vmx_copy+0x3c/0x60 [c000000073f97510] c000000000057d34 memcpy_power7+0x274/0x840 [c000000073f97610] d000000001c3179c copy_pages+0xfc/0x110 [btrfs] [c000000073f97660] d000000001c3c248 memcpy_extent_buffer+0xe8/0x160 [btrfs] [c000000073f97700] d000000001be4be8 setup_items_for_insert+0x208/0x4a0 [btrfs] [c000000073f97820] d000000001be50b4 btrfs_insert_empty_items+0xf4/0x140 [btrfs] [c000000073f97890] d000000001bfed30 insert_with_overflow+0x70/0x180 [btrfs] [c000000073f97900] d000000001bff174 btrfs_insert_dir_item+0x114/0x2f0 [btrfs] [c000000073f979a0] d000000001c1f92c btrfs_add_link+0x10c/0x370 [btrfs] [c000000073f97a40] d000000001c20e94 btrfs_create+0x204/0x270 [btrfs] [c000000073f97b00] c00000000026d438 vfs_create+0x178/0x210 [c000000073f97b50] c000000000270a70 do_last+0x9f0/0xe90 [c000000073f97c20] c000000000271010 path_openat+0x100/0x810 [c000000073f97ce0] c000000000272ea8 do_filp_open+0x58/0xd0 [c000000073f97dc0] c00000000025ade8 do_sys_open+0x1b8/0x300 [c000000073f97e30] c00000000000a008 syscall_exit+0x0/0x7c Signed-off-by: -
Tyrel Datwyler authored
Commit 75b57ecf refactored device tree nodes to use kobjects such that they can be exposed via /sysfs. A secondary commit 0829f6d1 furthered this rework by moving the kobect initialization logic out of of_node_add into its own of_node_init function. The inital commit removed the existing kref_init calls in the pseries dlpar code with the assumption kobject initialization would occur in of_node_add. The second commit had the side effect of triggering a BUG_ON during DLPAR, migration and suspend/resume operations as a result of dynamically added nodes being uninitialized. This patch fixes this by adding of_node_init calls in place of the previously removed kref_init calls. Fixes: 0829f6d1 ("of: device_node kobject lifecycle fixes") Cc: stable@vger.kernel.org Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Acked-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by:
Grant Likely <grant.likely@linaro.org> Signed-off-by:
-
Aneesh Kumar K.V authored
We now support TASK_SIZE of 16TB, hence the array should be 8. Fixes the below crash: Unable to handle kernel paging request for data at address 0x000100bd Faulting instruction address: 0xc00000000004f914 cpu 0x13: Vector: 300 (Data Access) at [c000000fea75fa90] pc: c00000000004f914: .sys_subpage_prot+0x2d4/0x5c0 lr: c00000000004fb5c: .sys_subpage_prot+0x51c/0x5c0 sp: c000000fea75fd10 msr: 9000000000009032 dar: 100bd dsisr: 40000000 current = 0xc000000fea6ae490 paca = 0xc00000000fb8ab00 softe: 0 irq_happened: 0x00 pid = 8237, comm = a.out enter ? for help [c000000fea75fe30] c00000000000a164 syscall_exit+0x0/0x98 Signed-off-by: -
Paul Mackerras authored
This fixes some bugs in emulate_step(). First, the setting of the carry bit for the arithmetic right-shift instructions was not correct on 64-bit machines because we were masking with a mask of type int rather than unsigned long. Secondly, the sld (shift left doubleword) instruction was using the wrong instruction field for the register containing the shift count. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Joel Stanley authored
These processors do not currently support doorbell IPIs, so remove them from the feature list if we are at DD 1.xx for the 0x004d part. This fixes a regression caused by d4e58e59 (powerpc/powernv: Enable POWER8 doorbell IPIs). With that patch the kernel would hang at boot when calling smp_call_function_many, as the doorbell would not be received by the target CPUs: .smp_call_function_many+0x2bc/0x3c0 (unreliable) .on_each_cpu_mask+0x30/0x100 .cpuidle_register_driver+0x158/0x1a0 .cpuidle_register+0x2c/0x110 .powernv_processor_idle_init+0x23c/0x2c0 .do_one_initcall+0xd4/0x260 .kernel_init_freeable+0x25c/0x33c .kernel_init+0x1c/0x120 .ret_from_kernel_thread+0x58/0x7c Fixes: d4e58e59 (powerpc/powernv: Enable POWER8 doorbell IPIs) Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
- 11 Jul, 2014 15 commits
-
-
Anton Blanchard authored
Knowing how long we spend in firmware calls is an important part of minimising OS jitter. This patch adds tracepoints to each OPAL call. If tracepoints are enabled we branch out to a common routine that calls an entry and exit tracepoint. This allows us to write tools that monitor the frequency and duration of OPAL calls, eg: name count total(ms) min(ms) max(ms) avg(ms) period(ms) OPAL_HANDLE_INTERRUPT 5 0.199 0.037 0.042 0.040 12547.545 OPAL_POLL_EVENTS 204 2.590 0.012 0.036 0.013 2264.899 OPAL_PCI_MSI_EOI 2830 3.066 0.001 0.005 0.001 81.166 We use jump labels if configured, which means we only add a single nop instruction to every OPAL call when the tracepoints are disabled. Signed-off-by:
Anton Blanchard <anton@samba.org> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Anton Blanchard authored
Now that we execute the hcall tracepoint entry and exit code out of line, we can use the same stack across both functions. Signed-off-by:
-
Anton Blanchard authored
hcall tracepoints add quite a few instructions to our hcall path: plpar_hcall: mr r2,r2 mfcr r0 stw r0,8(r1) b 164 <---- start ld r12,0(r2) std r12,32(r1) cmpdi r12,0 beq 164 <---- end ... We have an unconditional branch that gets noped out during boot and a load/compare/branch. We also store the tracepoint value to the stack for the hcall_exit path to use. By using jump labels we can simplify this to just a single nop that gets replaced with a branch when the tracepoint is enabled: plpar_hcall: mr r2,r2 mfcr r0 stw r0,8(r1) nop <---- ... If jump labels are not enabled, we fall back to the old method. Signed-off-by:
-
Alexey Kardashevskiy authored
Since a TCE page size can be other than 4K, make it configurable for P5IOC2 and IODA PHBs. Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
Alexey Kardashevskiy authored
This makes use of iommu_table::it_page_shift instead of TCE_SHIFT and TCE_RPN_SHIFT hardcoded values. Signed-off-by:
-
Alexey Kardashevskiy authored
This fixes IODA1/2 to use it_page_shift as it may be bigger than 4K. This changes involved constant values to use "ull" modifier. Signed-off-by:
-
Benjamin Herrenschmidt authored
-
Anton Blanchard authored
We are seeing a lot of PMU warnings on POWER8: Can't find PMC that caused IRQ Looking closer, the active PMC is 0 at this point and we took a PMU exception on the transition from negative to 0. Some versions of POWER8 have an issue where they edge detect and not level detect PMC overflows. A number of places program the PMC with (0x80000000 - period_left), where period_left can be negative. We can either fix all of these or just ensure that period_left is always >= 1. This patch takes the second option. Cc: <stable@vger.kernel.org> Signed-off-by: -
Guenter Roeck authored
powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Joel Stanley authored
On POWER8 when switching to a KVM guest we set bits in MMCR2 to freeze the PMU counters. Aside from on boot they are then never reset, resulting in stuck perf counters for any user in the guest or host. We now set MMCR2 to 0 whenever enabling the PMU, which provides a sane state for perf to use the PMU counters under either the guest or the host. This was manifesting as a bug with ppc64_cpu --frequency: $ sudo ppc64_cpu --frequency WARNING: couldn't run on cpu 0 WARNING: couldn't run on cpu 8 ... WARNING: couldn't run on cpu 144 WARNING: couldn't run on cpu 152 min: 18446744073.710 GHz (cpu -1) max: 0.000 GHz (cpu -1) avg: 0.000 GHz The command uses a perf counter to measure CPU cycles over a fixed amount of time, in order to approximate the frequency of the machine. The counters were returning zero once a guest was started, regardless of weather it was still running or had been shut down. By dumping the value of MMCR2, it was observed that once a guest is running MMCR2 is set to 1s - which stops counters from running: $ sudo sh -c 'echo p > /proc/sysrq-trigger' CPU: 0 PMU registers, ppmu = POWER8 n_counters = 6 PMC1: 5b635e38 PMC2: 00000000 PMC3: 00000000 PMC4: 00000000 PMC5: 1bf5a646 PMC6: 5793d378 PMC7: deadbeef PMC8: deadbeef MMCR0: 0000000080000000 MMCR1: 000000001e000000 MMCRA: 0000040000000000 MMCR2: fffffffffffffc00 EBBHR: 0000000000000000 EBBRR: 0000000000000000 BESCR: 0000000000000000 SIAR: 00000000000a51cc SDAR: c00000000fc40000 SIER: 0000000001000000 This is done unconditionally in book3s_hv_interrupts.S upon entering the guest, and the original value is only save/restored if the host has indicated it was using the PMU. This is okay, however the user of the PMU needs to ensure that it is in a defined state when it starts using it. Fixes: e05b9b9e ("powerpc/perf: Power8 PMU support") Cc: stable@vger.kernel.org Signed-off-by: -
Joel Stanley authored
Instead of separate bits for every POWER8 PMU feature, have a single one for v2.07 of the architecture. This saves us adding a MMCR2 define for a future patch. Cc: stable@vger.kernel.org Signed-off-by:
-
Joel Stanley authored
These two registers are already saved in the block above. Aside from being unnecessary, by the time we get down to the second save location r8 no longer contains MMCR2, so we are clobbering the saved value with PMC5. MMCR2 primarily consists of counter freeze bits. So restoring the value of PMC5 into MMCR2 will most likely have the effect of freezing counters. Fixes: 72cde5a8 ("KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8") Cc: stable@vger.kernel.org Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Preeti U Murthy authored
Commit 8d6f7c5a: "powerpc/powernv: Make it possible to skip the IRQHAPPENED check in power7_nap()" added code that prevents cpus from checking for pending interrupts just before entering sleep state, which is wrong. These interrupts are delivered during the soft irq disabled state of the cpu. A cpu cannot enter any idle state with pending interrupts because they will never be serviced until the next time the cpu is woken up by some other interrupt. Its only then that the pending interrupts are replayed. This can result in device timeouts or warnings about this cpu being stuck. This patch fixes ths issue by ensuring that cpus check for pending interrupts just before entering any idle state as long as they are not in the path of split core operations. Signed-off-by:
Preeti U Murthy <preeti@linux.vnet.ibm.com> Acked-by:
-
Michael Ellerman authored
In fb5a5157 "powerpc: Remove platforms/wsp and associated pieces", we removed the last user of MMU_FTRS_A2. So remove it. MMU_FTRS_A2 was the last user of MMU_FTR_TYPE_3E, so remove it also. This leaves some unreachable code in mmu_context_nohash.c, so remove that also. Signed-off-by:
-
Michael Ellerman authored
Commit 046d662f "coredump: make core dump functionality optional" made the coredump optional, but didn't update the spufs code that depends on it. That leads to build errors such as: arch/powerpc/platforms/built-in.o: In function `.spufs_arch_write_note': coredump.c:(.text+0x22cd4): undefined reference to `.dump_emit' coredump.c:(.text+0x22cf4): undefined reference to `.dump_emit' coredump.c:(.text+0x22d0c): undefined reference to `.dump_align' coredump.c:(.text+0x22d48): undefined reference to `.dump_emit' coredump.c:(.text+0x22e7c): undefined reference to `.dump_skip' Fix it by adding some ifdefs in the cell code. Signed-off-by:
-
- 02 Jul, 2014 3 commits
-
-
Laurentiu TUDOR authored
They're almost a duplicate of the boards array and we can build them at run-time. Signed-off-by:
Laurentiu Tudor <Laurentiu.Tudor@freescale.com> Signed-off-by:
Scott Wood <scottwood@freescale.com>
-
Shengzhou Liu authored
Add support for Freescale T2080/T2081 QDS Development System Board. The T2080QDS Development System is a high-performance computing, evaluation, and development platform that supports T2080 QorIQ Power Architecture processor, with following major features: T2080QDS feature overview: Processor: - T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz Memory: - Single memory controller capable of supporting DDR3 and DDR3-LP - Dual DIMM slots up 2133MT/s with ECC Ethernet interfaces: - Two 1Gbps RGMII on-board ports - Four 10Gbps XFI on-board cages - 1Gbps/2.5Gbps SGMII Riser card - 10Gbps XAUI Riser card Accelerator: - DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC SerDes: - 16 lanes up to 10.3125GHz - Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI IFC: - 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA eSPI: - Three SPI flash (16MB N25Q128A + 8MB EN25S64 + 512KB SST25WF040) USB: - Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB) PCIE: - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0, SR-IOV) SATA: - Two SATA 2.0 ports on-board SRIO: - Two Serial RapidIO 2.0 ports up to 5 GHz eSDHC: - Supports SD/MMC/eMMC Card DMA: - Three 8-channels DMA controllers I2C: - Four I2C controllers. UART: - Dual 4-pins UART serial ports System Logic: - QIXIS-II FPGA system controll T2081QDS board shares the same PCB with T1040QDS with some differences. Signed-off-by:
Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by:
-
Shengzhou Liu authored
The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power Architecture processor cores with high-performance datapath acceleration logic and network and peripheral bus interfaces required for networking, telecom/datacom, wireless infrastructure, and mil/aerospace applications. The T2080 SoC includes the following function and features: - Four dual-threaded 64-bit Power architecture e6500 cores, up to 1.8GHz - 2MB L2 cache and 512KB CoreNet platform cache (CPC) - Hierarchical interconnect fabric - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving - Data Path Acceleration Architecture (DPAA) incorporating acceleration - 16 SerDes lanes up to 10.3125 GHz - 8 Ethernet interfaces (multiple 1G/2.5G/10G MACs) - High-speed peripheral interfaces - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0) - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz - Additional peripheral interfaces - Two serial ATA (SATA 2.0) controllers - Two high-speed USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/SDXC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Three eight-channel DMA engines - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 T2081 is a reduced personality of T2080 with following difference: Feature T2080 T2081 1G Ethernet numbers: 8 6 10G Ethernet numbers: 4 2 SerDes lanes: 16 8 Serial RapidIO,RMan: 2 no SATA Controller: 2 no Aurora: yes no SoC Package: 896-pins 780-pins Signed-off-by:
-
- 25 Jun, 2014 8 commits
-
-
Scott Wood authored
m8xx_pcmcia_ops was the only thing in this file (other than a comment that describes a usage that doesn't match the file's contents); now that m8xx_pcmcia_ops is gone, remove the empty file. Signed-off-by: -
Scott Wood authored
This driver doesn't build, and apparently has not built since arch/ppc was removed in 2008 (when mk_int_int_mask was removed from asm/irq.h, among other build errors). A few weeks ago I asked whether anyone was actively maintaining this code, and got no positive response: http://patchwork.ozlabs.org/patch/352082/ So, let's remove it. Signed-off-by:
-
Bharat Bhushan authored
This fixes below compilation error on SOCs where CONFIG_PHYS_64BIT is not defined: arch/powerpc/kvm/e500_mmu_host.c: In function 'kvmppc_e500_shadow_map': | arch/powerpc/kvm/e500_mmu_host.c:631:20: error: 'PTE_WIMGE_SHIFT' undeclared (first use in this function) | wimg = (*ptep >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK; | ^ | arch/powerpc/kvm/e500_mmu_host.c:631:20: note: each undeclared identifier is reported only once for each function it appears in | make[1]: *** [arch/powerpc/kvm/e500_mmu_host.o] Error 1 Signed-off-by:
Bharat Bhushan <Bharat.Bhushan@freescale.com> Signed-off-by:
-
Wladislav Wiebe authored
In machine_check_e500 exception handler is a wrong indication in case of MCSR_BUS_WBERR - so print "Write" instead of "Read". Signed-off-by:
Wladislav Wiebe <wladislav.kw@gmail.com> Signed-off-by:
-
Chunhe Lan authored
T4240RDB board Specification ---------------------------- Memory subsystem: 6GB DDR3 128MB NOR flash 2GB NAND flash Ethernet: Eight 1G SGMII ports Four 10Gbps SFP+ ports PCIe: Two PCIe slots USB: Two USB2.0 Type A ports SDHC: One SD-card port SATA: One SATA port UART: Dual RJ45 ports Signed-off-by:Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by:
-
Scott Wood authored
Commit 59a53afe "powerpc: Don't setup CPUs with bad status" broke ePAPR SMP booting. ePAPR says that CPUs that aren't presently running shall have status of disabled, with enable-method being used to determine whether the CPU can be enabled. Fix by checking for spin-table, which is currently the only supported enable-method. Signed-off-by:
-
Laurent Dufour authored
The commit 71ec7c55 introduced the magic symbol ".TOC." for ELFv2 ABI. This symbol is built manually and has no CRC value computed. A zero value is put in the CRC section to avoid modpost complaining about a missing CRC. Unfortunately, this breaks the kernel module loading when the kernel is relocated (kdump case for instance) because of the relocation applied to the kcrctab values. This patch compute a CRC value for the TOC symbol which will match the one compute by the kernel when it is relocated - aka '0 - relocate_start' done in maybe_relocated called by check_version (module.c). Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Anton Blanchard <anton@samba.org> Signed-off-by:
-
Michael Ellerman authored
In commit 27f44888 "Add OPAL takeover from PowerVM" we added support for "takeover" on OPAL v1 machines. This was a mode of operation where we would boot under pHyp, and query for the presence of OPAL. If detected we would then do a special sequence to take over the machine, and the kernel would end up running in hypervisor mode. OPAL v1 was never a supported product, and was never shipped outside IBM. As far as we know no one is still using it. Newer versions of OPAL do not use the takeover mechanism. Although the query for OPAL should be harmless on machines with newer OPAL, we have seen a machine where it causes a crash in Open Firmware. The code in early_init_devtree() to copy boot_command_line into cmd_line was added in commit 817c21ad "Get kernel command line accross OPAL takeover", and AFAIK is only used by takeover, so should also be removed. Signed-off-by:
-
- 24 Jun, 2014 5 commits
-
-
Catalin Marinas authored
The DART table allocation is registered to kmemleak via the memblock_alloc_base() call. However, the DART table is later unmapped and dart_tablebase VA no longer accessible. This patch tells kmemleak not to scan this block and avoid an unhandled paging request. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Michael Ellerman authored
This gives us standardised success/failure output and also handles killing the test if it runs forever (2 minutes). Signed-off-by:
-
Rickard Strandqvist authored
This variable is of the wrong type, everywhere it is used it should be an unsigned int rather than a int. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Michael Ellerman authored
In commit 721aeaa9 "Build little endian ppc64 kernel with ABIv2", we missed some updates required in the kprobes code to make jprobes work when the kernel is built with ABI v2. Firstly update arch_deref_entry_point() to do the right thing. Now that we have added ppc_global_function_entry() we can just always use that, it will do the right thing for 32 & 64 bit and ABI v1 & v2. Secondly we need to update the code that sets up the register state before calling the jprobe handler. On ABI v1 we setup r2 to hold the TOC, on ABI v2 we need to populate r12 with the function entry point address. Signed-off-by:
-
Michael Ellerman authored
The printks() in our ftrace code have no prefix, so they appear on the console with very little context, eg: Branch out of range Use pr_fmt() & pr_err() to add a prefix. While we're at it, collapse a few split lines that don't need to be, and add a missing newline to one message. Signed-off-by:
-
