- 05 Apr, 2019 13 commits
-
-
Jiri Pirko authored
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Introduce devlink_compat_switch_id_get() helper which fills up switch_id according to passed netdev pointer. Call it directly from dev_get_port_parent_id() as a fallback when ndo_get_port_parent_id is not defined for given netdev. Signed-off-by:
-
Jiri Pirko authored
Extend devlink_port_attrs_set() to pass switch ID for ports which are part of switch and store it in port attrs. For other ports, this is NULL. Note that this allows the driver to group devlink ports into one or more switches according to the actual topology. Signed-off-by:
-
Jiri Pirko authored
In order to save space in the struct, convert bools to bits. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Nikolay Aleksandrov authored
We can optimize the fdb convergence when a backup_port is present by not immediately flushing the entries of the stopped port since traffic for those entries will flow towards the backup_port. There are 2 cases specifically that benefit most: - when the stopped port comes up before the entries expire by themselves - when there's an external entry refresh and they're kept while the backup_port is operating (e.g. mlag) Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Yuval Shaia authored
This header is not in use - remove it. Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/ibm/ibmvnic.c: In function '__ibmvnic_reset': drivers/net/ethernet/ibm/ibmvnic.c:1971:21: warning: variable 'netdev' set but not used [-Wunused-but-set-variable] It's never used since introduction in commit ed651a10 ("ibmvnic: Updated reset handling") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/ibm/ehea/ehea_qmr.c: In function 'ehea_create_cq': drivers/net/ethernet/ibm/ehea/ehea_qmr.c:127:7: warning: variable 'cq_handle_ref' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/ibm/ehea/ehea_qmr.c:126:15: warning: variable 'epa' set but not used [-Wunused-but-set-variable] They are never used since commit 7a291083 ("[PATCH] ehea: IBM eHEA Ethernet Device Driver") Signed-off-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/pasemi/pasemi_mac.c: In function 'pasemi_mac_queue_csdesc': drivers/net/ethernet/pasemi/pasemi_mac.c:1358:29: warning: variable 'cpyhdr' set but not used [-Wunused-but-set-variable] It's never used since commit 8d636d8b ("pasemi_mac: jumbo frame support") and can be removed. Signed-off-by:
-
YueHaibing authored
pr->tx_bytes should be assigned to tx_bytes other than rx_bytes. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: ce45b873 ("ehea: Fixing statistics") Signed-off-by:
-
Florian Westphal authored
syzbot reports: BUG: using __this_cpu_read() in preemptible code: caller is dev_recursion_level include/linux/netdevice.h:3052 [inline] __this_cpu_preempt_check+0x246/0x270 lib/smp_processor_id.c:47 dev_recursion_level include/linux/netdevice.h:3052 [inline] ip6_skb_dst_mtu include/net/ip6_route.h:245 [inline] I erronously downgraded a this_cpu_read to __this_cpu_read when moving dev_recursion_level() around. Reported-by: syzbot+51471b4aae195285a4a3@syzkaller.appspotmail.com Fixes: 97cdcf37 ("net: place xmit recursion in softnet data") Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hoang Le authored
skb somehow dequeued out of inputq before processing, it causes to NULL pointer and kernel crashed. Add checking skb valid before using. Fixes: c55c8eda ("tipc: smooth change between replicast and broadcast") Reported-by:
Tuong Lien Tong <tuong.t.lien@dektech.com.au> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
John Hurley authored
Recent changes to TC flower remove the requirement for rtnl lock when accessing and modifying filters. Refcounts now ensure access and deletion do not happen concurrently. However, the reoffload function which cycles through all filters and replays them to registered hw drivers is not protected. Use the fl_get_next_filter() function to cycle the filters for reoffload and ensure the ref taken by this function is put when done with each filter. Signed-off-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
- 04 Apr, 2019 27 commits
-
-
Pablo Neira Ayuso authored
Simplify this code by updating bridge multicast stats from maybe_deliver(). Note that commit 6db6f0ea ("bridge: multicast to unicast"), in case the port flag BR_MULTICAST_TO_UNICAST is set, never updates the previous port pointer, therefore it is always going to be different from the existing port in this deduplicated list iteration. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
-
Pablo Neira Ayuso authored
Just like 46cfd725 ("net: use kfree_skb_list() helper in more places"). Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver. Change log: V1->V2: fixes comments from Sergei Shtylyov ==================== Signed-off-by: -
Jian Shen authored
The function hnae3_match_n_instantiate() was called both by initializing or uninitializing client. For uninitializing, the return value was never used. To make it more clear, this patch splits it to two functions, hnae3_init_client_instance() and hnae3_uninit_client_instance(). Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
In the hns3_reset_notify_uninit_enet() HNS3_NIC_STATE_INITED flag should be checked and cleared firstly. Signed-off-by:
-
Huazhong Tan authored
When resetting, the changing of MTU is not allowed, so this patch adds checking reset status in hns3_nic_change_mtu() to do that. Signed-off-by:
-
Huazhong Tan authored
hns3_get_stats() should check the resetting status firstly, since the device will be reinitialized when resetting. If the reset has not completed, the hns3_get_stats() may access invalid memory. Signed-off-by:
-
Jian Shen authored
It used netdev->uc and netdev->mc list in function hns3_recover_hw_addr() and hns3_remove_hw_addr(). We should add protect for them. Fixes: f05e2109 ("net: hns3: Clear mac vlan table entries when unload driver or function reset") Signed-off-by:
-
Huazhong Tan authored
csq is used as a ring buffer, the value of the desc will be replaced in next use. This patch removes the unnecessary memset, and just updates the next_to_clean. Signed-off-by:
-
Yunsheng Lin authored
This patch adds a likely case for hns3_fill_desc and limits the local variables' scope as much as possible, also avoid div operation when the tqp_vector->num_tqps is one. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
This patch optimizes the ring_space by calculating the ring space without calling ring_dist. Also ring_dist is only used by ring_space, so this patch removes it when it is no longer used. Signed-off-by:
-
Peng Li authored
When set 2 same MAC to different function of one port, IMP will return error as the later one may modify the origin one. This will cause bond fail for 2 VFs of one port. Driver just print warning and return 0 with this patch, so if set same MAC address, it will return 0 but do not really configure HW. Signed-off-by:
-
liuzhongzhu authored
Method for obtaining the media type of the VF network port periodically, regular tasks will not run until the network port UP. When the network port is DOWN, the network port cannot obtain the media type. Modifies the media type obtained when initializing the VF network port. Signed-off-by:
liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by:
-
Yonglong Liu authored
When the kdump kernel started, the HNS3 driver fail to register: [14.753340] hns3 0000:7d:00.0: Alloc umv space failed, want 512, get 0 [14.795034] hns3 0000:7d:00.0: add uc mac address fail, ret =-22. By default, the HNS3 driver will use about 512M memory, but usually the reserved memory of kdump kernel is 576M, so the HNS3 driver fail to register. This patch reduces the memory use in kdump kernel to about 16M. And when the kdump kernel starts, we must clear ucast mac address first to avoid add fail. Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
-
Peng Li authored
Hip08 SOC does not support 1000M half, this patch adds 1000M half check for hns3_ethtool_ops.set_link_ksettings, so the user can not set 1000M half by ethtool. Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: More movement to fib_nh_common Second set of three with the end goal of enabling IPv6 gateways with IPv4 routes. This set moves: - the ipv4 tracepoint to take a fib_nh_common and updates it to handle a v6 gateway. - consolidates route notifications to use the same fill functions for both ipv4 and ipv6 v4 - enhanced the commit message for patches 1 and 2 v3 - comments from Martin: + renamed FIB_RES_NH to FIB_RES_NHC + removed family check from fib_result_prefsrc + in fib_nexthop_info, renamed nexthop arg to nhc and dropped for_ipv4 arg v2 - dropped patches moving cached routes and exception buckets to fib_nh_common. The goal is allowing a fib6_nh to be used with an IPv4 route. The hold up is the need for separate exception buckets - one for v6 routes and one for v4 routes. When all of the nexthop patches are in, adding a secondi exception bucket pushes IPv6 fib6_info allocations over 256 which means fib6_info allocations roll up to 512. Hence, deferring the patches until some data mining can be done to keep the allocations at 256. ==================== Acked-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
-
David Ahern authored
Export fib_nexthop_info and fib_add_nexthop for use by IPv6 code. Remove rt6_nexthop_info and rt6_add_nexthop in favor of the IPv4 versions. Update fib_nexthop_info for IPv6 linkdown check and RTA_GATEWAY for AF_INET6. Signed-off-by:
David Ahern <dsahern@gmail.com> Acked-by:
-
David Ahern authored
With the exception of the nexthop weight, the nexthop attributes used by fib_nexthop_info and fib_add_nexthop come from the fib_nh_common struct. Update both to use it and change fib_nexthop_info to check the family as needed. nexthop weight comes from the common struct for existing use cases, but for nexthop groups the weight is outside of the fib_nh_common to allow the same nexthop definition to be used in multiple groups with different weights. Signed-off-by:
-
David Ahern authored
Similar to ipv6, move addition of nexthop attributes to dump message into helpers that are called for both single path and multipath routes. Align the new helpers to the IPv6 variant which most notably means computing the flags argument based on settings in nh_flags. The RTA_FLOW argument is unique to IPv4, so it is appended after the new fib_nexthop_info helper. The intent of a later patch is to make both fib_nexthop_info and fib_add_nexthop usable for both IPv4 and IPv6. This patch is stepping stone in that direction. Signed-off-by:
-
David Ahern authored
Most of the ipv4 code only needs data from fib_nh_common. Add fib_nh_common selection to fib_result and update users to use it. Right now, fib_nh_common in fib_result will point to a fib_nh struct that is embedded within a fib_info: fib_info --> fib_nh fib_nh ... fib_nh ^ fib_result->nhc ----+ Later, nhc can point to a fib_nh within a nexthop struct: fib_info --> nexthop --> fib_nh ^ fib_result->nhc ---------------+ or for a nexthop group: fib_info --> nexthop --> nexthop --> fib_nh nexthop --> fib_nh ... nexthop --> fib_nh ^ fib_result->nhc ---------------------------+ In all cases nhsel within fib_result will point to which leg in the multipath route is used. Signed-off-by: -
David Ahern authored
Update fib_table_lookup tracepoint to take a fib_nh_common struct and dump the v6 gateway address if the nexthop uses it. Over the years saddr has not proven useful and the output of the tracepoint produces very long lines. Since saddr is not part of fib_nh_common, drop it. If it needs to be added later, fib_nh which contains saddr can be obtained from a fib_nh_common via container_of. Signed-off-by:
-
Heiner Kallweit authored
The original patch didn't consider the case that autoneg process finishes successfully but both link partners have no mode in common. In this case there's no link, nevertheless we may be interested in what the link partner advertised. Like phydev->link we set phydev->autoneg_complete in genphy_update_link() and use the stored value in genphy_read_status(). This way we don't have to read register BMSR again. Fixes: b6163f19 ("net: phy: improve genphy_read_status") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Antoine Tenart says: ==================== net: phy: marvell10g: implement suspend/resume callbacks This series implements the suspend/resume callbacks in the marvell10g PHY driver. Thanks, Antoine Since v3: - Use the new phy_set/clear_bits_mmd() instead of phy_modify_mmd(). - Use VEND2.f001.11 to power down the port instead of the per-mode LPOWER. Since v2: - Removed the third patch, setting the PHY in low power by default, as the change was controversial. - Rebased on the latest net-next. Since v1: - Fixed a mix up in the patches where two implementations of the suspend/resume callbacks were kept in the driver. - Rebased on the latest net-next. ==================== Signed-off-by: -
Antoine Tenart authored
When the 88x2110 PHY support was added, the suspend and resume callbacks were forgotten. This patch adds them to the 88x2110 PHY callback definition. Signed-off-by:
Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
-
Antoine Tenart authored
This patch adds the suspend/resume callbacks for Marvell 10G PHYs. The three PCS (base-t, base-r and 1000base-x) are set in low power (the PCS are powered down) when the PHY isn't used. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/dsa/microchip/ksz9477.c: In function ‘ksz9477_get_interface’: drivers/net/dsa/microchip/ksz9477.c:1145:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (gbit) ^ drivers/net/dsa/microchip/ksz9477.c:1147:2: note: here case 0: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: net/rxrpc/local_object.c: In function ‘rxrpc_open_socket’: net/rxrpc/local_object.c:175:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ret < 0) { ^ net/rxrpc/local_object.c:184:2: note: here case AF_INET: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Currently, GCC is expecting to find the fall-through annotations at the very bottom of the case and on its own line. That's why I had to add the annotation, although the intentional fall-through is already mentioned in a few lines above. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:
-
