Skip to content

L
linux
Switch branch/tag
  1. 18 Mar, 2018 28 commits
  3. 11 Mar, 2018 12 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.4.121 · 8b5ab55d
      Greg Kroah-Hartman authored
      8b5ab55d
    • Ernesto A. Fernández's avatar
      btrfs: preserve i_mode if __btrfs_set_acl() fails · 0fc85640
      Ernesto A. Fernández authored 
      commit d7d82496 upstream.

When changing a file's acl mask, btrfs_set_acl() will first set the
group bits of i_mode to the value of the mask, and only then set the
actual extended attribute representing the new acl.

If the second part fails (due to lack of space, for example) and the
file had no acl attribute to begin with, the system will from now on
assume that the mask permission bits are actual group permission bits,
potentially granting access to the wrong users.

Prevent this by restoring the original mode bits if __btrfs_set_acl
fails.
Signed-off-by: default avatarErnesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Reviewed-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
Signed-off-by: default avatarNikolay Borisov <nborisov@suse.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0fc85640
    • Daniel Borkmann's avatar
      bpf, x64: implement retpoline for tail call · ea1c4ebe
      Daniel Borkmann authored 
      
[ upstream commit a493a87f ]

Implement a retpoline [0] for the BPF tail call JIT'ing that converts
the indirect jump via jmp %rax that is used to make the long jump into
another JITed BPF image. Since this is subject to speculative execution,
we need to control the transient instruction sequence here as well
when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop.
The latter aligns also with what gcc / clang emits (e.g. [1]).

JIT dump after patch:

  # bpftool p d x i 1
   0: (18) r2 = map[id:1]
   2: (b7) r3 = 0
   3: (85) call bpf_tail_call#12
   4: (b7) r0 = 2
   5: (95) exit

With CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000072  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000072  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000072  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	callq  0x000000000000006d  |+
  66:	pause                      |
  68:	lfence                     |
  6b:	jmp    0x0000000000000066  |
  6d:	mov    %rax,(%rsp)         |
  71:	retq                       |
  72:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  + retpoline for indirect jump

Without CONFIG_RETPOLINE:

  # bpftool p d j i 1
  [...]
  33:	cmp    %edx,0x24(%rsi)
  36:	jbe    0x0000000000000063  |*
  38:	mov    0x24(%rbp),%eax
  3e:	cmp    $0x20,%eax
  41:	ja     0x0000000000000063  |
  43:	add    $0x1,%eax
  46:	mov    %eax,0x24(%rbp)
  4c:	mov    0x90(%rsi,%rdx,8),%rax
  54:	test   %rax,%rax
  57:	je     0x0000000000000063  |
  59:	mov    0x28(%rax),%rax
  5d:	add    $0x25,%rax
  61:	jmpq   *%rax               |-
  63:	mov    $0x2,%eax
  [...]

  * relative fall-through jumps in error case
  - plain indirect jump as before

  [0] https://support.google.com/faqs/answer/7625886
  [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2bSigned-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ea1c4ebe
    • Mike Snitzer's avatar
      dm io: fix duplicate bio completion due to missing ref count · bb97a657
      Mike Snitzer authored 
      commit feb7695f upstream.

If only a subset of the devices associated with multiple regions support
a given special operation (eg. DISCARD) then the dec_count() that is
used to set error for the region must increment the io->count.

Otherwise, when the dec_count() is called it can cause the dm-io
caller's bio to be completed multiple times.  As was reported against
the dm-mirror target that had mirror legs with a mix of discard
capabilities.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077Reported-by: default avatarZhang Yi <yizhan@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bb97a657
    • Dan Williams's avatar
      mpls, nospec: Sanitize array index in mpls_label_ok() · e7f17d03
      Dan Williams authored 
      commit 3968523f upstream.

mpls_label_ok() validates that the 'platform_label' array index from a
userspace netlink message payload is valid. Under speculation the
mpls_label_ok() result may not resolve in the CPU pipeline until after
the index is used to access an array element. Sanitize the index to zero
to prevent userspace-controlled arbitrary out-of-bounds speculation, a
precursor for a speculative execution side channel vulnerability.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
[bwh: Backported to 4.4:
 - mpls_label_ok() doesn't take an extack parameter
 - Drop change in mpls_getroute()]
Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e7f17d03
    • David Ahern's avatar
      net: mpls: Pull common label check into helper · 4bd01ca7
      David Ahern authored 
      commit b7b386f4 upstream.

mpls_route_add and mpls_route_del have the same checks on the label.
Move to a helper. Avoid duplicate extack messages in the next patch.
Signed-off-by: default avatarDavid Ahern <dsahern@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarBen Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4bd01ca7
    • Alexey Kodanev's avatar
      sctp: verify size of a new chunk in _sctp_make_chunk() · 54b183ea
      Alexey Kodanev authored 
      
[ Upstream commit 07f2c7ab ]

When SCTP makes INIT or INIT_ACK packet the total chunk length
can exceed SCTP_MAX_CHUNK_LEN which leads to kernel panic when
transmitting these packets, e.g. the crash on sending INIT_ACK:

[  597.804948] skbuff: skb_over_panic: text:00000000ffae06e4 len:120168
               put:120156 head:000000007aa47635 data:00000000d991c2de
               tail:0x1d640 end:0xfec0 dev:<NULL>
...
[  597.976970] ------------[ cut here ]------------
[  598.033408] kernel BUG at net/core/skbuff.c:104!
[  600.314841] Call Trace:
[  600.345829]  <IRQ>
[  600.371639]  ? sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.436934]  skb_put+0x16c/0x200
[  600.477295]  sctp_packet_transmit+0x2095/0x26d0 [sctp]
[  600.540630]  ? sctp_packet_config+0x890/0x890 [sctp]
[  600.601781]  ? __sctp_packet_append_chunk+0x3b4/0xd00 [sctp]
[  600.671356]  ? sctp_cmp_addr_exact+0x3f/0x90 [sctp]
[  600.731482]  sctp_outq_flush+0x663/0x30d0 [sctp]
[  600.788565]  ? sctp_make_init+0xbf0/0xbf0 [sctp]
[  600.845555]  ? sctp_check_transmitted+0x18f0/0x18f0 [sctp]
[  600.912945]  ? sctp_outq_tail+0x631/0x9d0 [sctp]
[  600.969936]  sctp_cmd_interpreter.isra.22+0x3be1/0x5cb0 [sctp]
[  601.041593]  ? sctp_sf_do_5_1B_init+0x85f/0xc30 [sctp]
[  601.104837]  ? sctp_generate_t1_cookie_event+0x20/0x20 [sctp]
[  601.175436]  ? sctp_eat_data+0x1710/0x1710 [sctp]
[  601.233575]  sctp_do_sm+0x182/0x560 [sctp]
[  601.284328]  ? sctp_has_association+0x70/0x70 [sctp]
[  601.345586]  ? sctp_rcv+0xef4/0x32f0 [sctp]
[  601.397478]  ? sctp6_rcv+0xa/0x20 [sctp]
...

Here the chunk size for INIT_ACK packet becomes too big, mostly
because of the state cookie (INIT packet has large size with
many address parameters), plus additional server parameters.

Later this chunk causes the panic in skb_put_data():

  skb_packet_transmit()
      sctp_packet_pack()
          skb_put_data(nskb, chunk->skb->data, chunk->skb->len);

'nskb' (head skb) was previously allocated with packet->size
from u16 'chunk->chunk_hdr->length'.

As suggested by Marcelo we should check the chunk's length in
_sctp_make_chunk() before trying to allocate skb for it and
discard a chunk if its size bigger than SCTP_MAX_CHUNK_LEN.
Signed-off-by: default avatarAlexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leinter@gmail.com>
Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      54b183ea
    • Julian Wiedmann's avatar
      s390/qeth: fix IPA command submission race · f3b580d3
      Julian Wiedmann authored 
      
[ Upstream commit d22ffb5a ]

If multiple IPA commands are build & sent out concurrently,
fill_ipacmd_header() may assign a seqno value to a command that's
different from what send_control_data() later assigns to this command's
reply.
This is due to other commands passing through send_control_data(),
and incrementing card->seqno.ipa along the way.

So one IPA command has no reply that's waiting for its seqno, while some
other IPA command has multiple reply objects waiting for it.
Only one of those waiting replies wins, and the other(s) times out and
triggers a recovery via send_ipa_cmd().

Fix this by making sure that the same seqno value is assigned to
a command and its reply object.
Do so immediately before submitting the command & while holding the
irq_pending "lock", to produce nicely ascending seqnos.

As a side effect, *all* IPA commands now use a reply object that's
waiting for its actual seqno. Previously, early IPA commands that were
submitted while the card was still DOWN used the "catch-all" IDX seqno.
Signed-off-by: default avatarJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f3b580d3
    • Julian Wiedmann's avatar
      s390/qeth: fix SETIP command handling · 290db9ba
      Julian Wiedmann authored 
      
[ Upstream commit 1c5b2216 ]

send_control_data() applies some special handling to SETIP v4 IPA
commands. But current code parses *all* command types for the SETIP
command code. Limit the command code check to IPA commands.

Fixes: 5b54e16f ("qeth: do not spin for SETIP ip assist command")
Signed-off-by: default avatarJulian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      290db9ba
    • Alexey Kodanev's avatar
      sctp: fix dst refcnt leak in sctp_v6_get_dst() · f99fb569
      Alexey Kodanev authored 
      
[ Upstream commit 957d761c ]

When going through the bind address list in sctp_v6_get_dst() and
the previously found address is better ('matchlen > bmatchlen'),
the code continues to the next iteration without releasing currently
held destination.

Fix it by releasing 'bdst' before continue to the next iteration, and
instead of introducing one more '!IS_ERR(bdst)' check for dst_release(),
move the already existed one right after ip6_dst_lookup_flow(), i.e. we
shouldn't proceed further if we get an error for the route lookup.

Fixes: dbc2b5e9 ("sctp: fix src address selection if using secondary addresses for ipv6")
Signed-off-by: default avatarAlexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f99fb569
    • Tommi Rantala's avatar
      sctp: fix dst refcnt leak in sctp_v4_get_dst · c4faf87c
      Tommi Rantala authored 
      
[ Upstream commit 4a31a6b1 ]

Fix dst reference count leak in sctp_v4_get_dst() introduced in commit
410f0383 ("sctp: add routing output fallback"):

When walking the address_list, successive ip_route_output_key() calls
may return the same rt->dst with the reference incremented on each call.

The code would not decrement the dst refcount when the dst pointer was
identical from the previous iteration, causing the dst refcnt leak.

Testcase:
  ip netns add TEST
  ip netns exec TEST ip link set lo up
  ip link add dummy0 type dummy
  ip link add dummy1 type dummy
  ip link add dummy2 type dummy
  ip link set dev dummy0 netns TEST
  ip link set dev dummy1 netns TEST
  ip link set dev dummy2 netns TEST
  ip netns exec TEST ip addr add 192.168.1.1/24 dev dummy0
  ip netns exec TEST ip link set dummy0 up
  ip netns exec TEST ip addr add 192.168.1.2/24 dev dummy1
  ip netns exec TEST ip link set dummy1 up
  ip netns exec TEST ip addr add 192.168.1.3/24 dev dummy2
  ip netns exec TEST ip link set dummy2 up
  ip netns exec TEST sctp_test -H 192.168.1.2 -P 20002 -h 192.168.1.1 -p 20000 -s -B 192.168.1.3
  ip netns del TEST

In 4.4 and 4.9 kernels this results to:
  [  354.179591] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  364.419674] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  374.663664] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  384.903717] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  395.143724] unregister_netdevice: waiting for lo to become free. Usage count = 1
  [  405.383645] unregister_netdevice: waiting for lo to become free. Usage count = 1
  ...

Fixes: 410f0383 ("sctp: add routing output fallback")
Fixes: 0ca50d12 ("sctp: fix src address selection if using secondary addresses")
Signed-off-by: default avatarTommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c4faf87c
    • Alexey Kodanev's avatar
      udplite: fix partial checksum initialization · e44cd77c
      Alexey Kodanev authored 
      
[ Upstream commit 15f35d49 ]

Since UDP-Lite is always using checksum, the following path is
triggered when calculating pseudo header for it:

  udp4_csum_init() or udp6_csum_init()
    skb_checksum_init_zero_check()
      __skb_checksum_validate_complete()

The problem can appear if skb->len is less than CHECKSUM_BREAK. In
this particular case __skb_checksum_validate_complete() also invokes
__skb_checksum_complete(skb). If UDP-Lite is using partial checksum
that covers only part of a packet, the function will return bad
checksum and the packet will be dropped.

It can be fixed if we skip skb_checksum_init_zero_check() and only
set the required pseudo header checksum for UDP-Lite with partial
checksum before udp4_csum_init()/udp6_csum_init() functions return.

Fixes: ed70fcfc ("net: Call skb_checksum_init in IPv4")
Fixes: e4f45b7f ("net: Call skb_checksum_init in IPv6")
Signed-off-by: default avatarAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e44cd77c
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7