- 25 Jan, 2008 40 commits
-
-
Michael Krufky authored
EXPORT_SYMBOL should have been EXPORT_SYMBOL_GPL Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Add analog tuning support to tda827x dvb_frontend tuner module. Convert tda8290 module back to native tuner interface. The tda8290 analog demodulator will be handled the same way as tda9887. The tuner.ko module (tuner-core) will pass commands to tda8290 via the tuner_operations interface. tda8290 will communicate with tda827x via the dvb_frontend interface, while passing a pointer to a private data structure. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This changeset converts tuner-xc2028 to the newer hybrid approach. It also prevents creating twice the xc3028 private struct by both DVB and V4L parts. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Michel Ludwig authored
Signed-off-by:
Michel Ludwig <michel.ludwig@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Michel Ludwig authored
Signed-off-by:
-
Michel Ludwig authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Add support for Xceive XC2028/XC3028 tuner driver Signed-off-by: -
Mauro Carvalho Chehab authored
Also replaces all occurrences of TUNER_XCEIVE_XC3028 to TUNER_XC2028. Some work is still may be required to make sure that non-tm6000 drivers will be capable of using tuner-xc2028. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
V4L1 ioctls were replaced to V4L2 were applicable. The older ones already implemented were removed. Signed-off-by: -
Nickolay V. Shmyrev authored
Signed-off-by:
Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by:
-
Nickolay V. Shmyrev authored
Also convert audio_mode_gpio functions from audio_hook Signed-off-by:
-
Nickolay V. Shmyrev authored
Signed-off-by:
-
Nickolay V. Shmyrev authored
Signed-off-by:
-
Nickolay V. Shmyrev authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Nickolay V. Shmyrev authored
This is part of the old V4L1->V4L2 bttv patch, ported to current tree by Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Nickolay V. Shmyrev authored
This is part of the old V4L1->V4L2 bttv patch, ported to current tree by Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Nickolay V. Shmyrev authored
This is part of the old V4L1->V4L2 bttv patch, ported to current tree by Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by:
-
Steven Toth authored
Fix i2c reads and writes of 16bit register address / values Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Matthias Kaehlcke authored
Convert the usbvision->lock semaphore to the mutex API Signed-off-by:
Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Reviewed-by:
Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Adrian Bunk authored
saa7134_buffer_requeue() and set_tvnorm() can become static. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
This board has some special tea5767 configuration. Basically, radio XTAL uses a different frequency than the other supported radios. It uses a 13 MHz XTAL. This patch adds the proper radio gpio and tea5767 configurations for the board. Also, with PAL/BG, the board requires some special init for tda9887: port1=0 port2=0 qss=1 Thanks to Serge Kolotylo and MIDImaster for their help on identifying the proper needs for this driver. Signed-off-by: -
Mauro Carvalho Chehab authored
tea5767 has several possible configurations. Before the patch, the driver were assuming the more common configuration. However, some newer cards, like MSI @nyware Master requires other configurations, like de-activating a gpio port and changing chip Xtal. This patch adds the capability of altering device configuration at runtime. This may also be used later to activate some features like auto-mute when signal is weak. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: mount options: fix jfs JFS: simplify types to get rid of sparse warning JFS: FIx one more plain integer as NULL pointer warning JFS: Remove defconfig ptr comparison to 0 JFS: use DIV_ROUND_UP where appropriate Remove unnecessary kmalloc casts in the jfs filesystem JFS is missing a memory barrier JFS: Make sure special inode data is written after journal is flushed JFS: clear PAGECACHE_TAG_DIRTY for no-write pages
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: selinux: make mls_compute_sid always polyinstantiate security/selinux: constify function pointer tables and fields security: add a secctx_to_secid() hook security: call security_file_permission from rw_verify_area security: remove security_sb_post_mountroot hook Security: remove security.h include from mm.h Security: remove security_file_mmap hook sparse-warnings (NULL as 0). Security: add get, set, and cloning of superblock security information security/selinux: Add missing "space"
-
git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6: [AVR32] extint: Set initial irq type to low level [AVR32] extint: change set_irq_type() handling [AVR32] NMI debugging [AVR32] constify function pointer tables [AVR32] ATNGW100: Update defconfig [AVR32] ATSTK1002: Update defconfig [AVR32] Kconfig: Choose daughterboard instead of CPU [AVR32] Add support for ATSTK1003 and ATSTK1004 [AVR32] Clean up external DAC setup code [AVR32] ATSTK1000: Move gpio-leds setup to setup.c [AVR32] Add support for AT32AP7001 and AT32AP7002 [AVR32] Provide more CPU information in /proc/cpuinfo and dmesg [AVR32] Oprofile support [AVR32] Include instrumentation menu Disable VGA text console for AVR32 architecture [AVR32] Enable debugging only when needed ptrace: Call arch_ptrace_attach() when request=PTRACE_TRACEME [AVR32] Remove redundant try_to_freeze() call from do_signal() [AVR32] Drop GFP_COMP for DMA memory allocations
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmwLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (56 commits) [GFS2] Allow journal recovery on read-only mount [GFS2] Lockup on error [GFS2] Fix page_mkwrite truncation race path [GFS2] Fix typo [GFS2] Fix write alloc required shortcut calculation [GFS2] gfs2_alloc_required performance [GFS2] Remove unneeded i_spin [GFS2] Reduce inode size by moving i_alloc out of line [GFS2] Fix assert in log code [GFS2] Fix problems relating to execution of files on GFS2 [GFS2] Initialize extent_list earlier [GFS2] Allow page migration for writeback and ordered pages [GFS2] Remove unused variable [GFS2] Fix log block mapper [GFS2] Minor correction [GFS2] Eliminate the no longer needed sd_statfs_mutex [GFS2] Incremental patch to fix compiler warning [GFS2] Function meta_read optimization [GFS2] Only fetch the dinode once in block_map [GFS2] Reorganize function gfs2_glmutex_lock ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (125 commits) [CRYPTO] twofish: Merge common glue code [CRYPTO] hifn_795x: Fixup container_of() usage [CRYPTO] cast6: inline bloat-- [CRYPTO] api: Set default CRYPTO_MINALIGN to unsigned long long [CRYPTO] tcrypt: Make xcbc available as a standalone test [CRYPTO] xcbc: Remove bogus hash/cipher test [CRYPTO] xcbc: Fix algorithm leak when block size check fails [CRYPTO] tcrypt: Zero axbuf in the right function [CRYPTO] padlock: Only reset the key once for each CBC and ECB operation [CRYPTO] api: Include sched.h for cond_resched in scatterwalk.h [CRYPTO] salsa20-asm: Remove unnecessary dependency on CRYPTO_SALSA20 [CRYPTO] tcrypt: Add select of AEAD [CRYPTO] salsa20: Add x86-64 assembly version [CRYPTO] salsa20_i586: Salsa20 stream cipher algorithm (i586 version) [CRYPTO] gcm: Introduce rfc4106 [CRYPTO] api: Show async type [CRYPTO] chainiv: Avoid lock spinning where possible [CRYPTO] seqiv: Add select AEAD in Kconfig [CRYPTO] scatterwalk: Handle zero nbytes in scatterwalk_map_and_copy [CRYPTO] null: Allow setkey on digest_null ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds authored
This can be broken down into these major areas: - Documentation updates (language translations and fixes, as well as kobject and kset documenatation updates.) - major kset/kobject/ktype rework and fixes. This cleans up the kset and kobject and ktype relationship and architecture, making sense of things now, and good documenation and samples are provided for others to use. Also the attributes for kobjects are much easier to handle now. This cleaned up a LOT of code all through the kernel, making kobjects easier to use if you want to. - struct bus_type has been reworked to now handle the lifetime rules properly, as the kobject is properly dynamic. - struct driver has also been reworked, and now the lifetime issues are resolved. - the block subsystem has been converted to use struct device now, and not "raw" kobjects. This patch has been in the -mm tree for over a year now, and finally all the issues are worked out with it. Older distros now properly work with new kernels, and no userspace updates are needed at all. - nozomi driver is added. This has also been in -mm for a long time, and many people have asked for it to go in. It is now in good enough shape to do so. - lots of class_device conversions to use struct device instead. The tree is almost all cleaned up now, only SCSI and IB is the remaining code to fix up... * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6: (196 commits) Driver core: coding style fixes Kobject: fix coding style issues in kobject c files Kobject: fix coding style issues in kobject.h Driver core: fix coding style issues in device.h spi: use class iteration api scsi: use class iteration api rtc: use class iteration api power supply : use class iteration api ieee1394: use class iteration api Driver Core: add class iteration api Driver core: Cleanup get_device_parent() in device_add() and device_move() UIO: constify function pointer tables Driver Core: constify the name passed to platform_device_register_simple driver core: fix build with SYSFS=n sysfs: make SYSFS_DEPRECATED depend on SYSFS Driver core: use LIST_HEAD instead of call to INIT_LIST_HEAD in __init kobject: add sample code for how to use ksets/ktypes/kobjects kobject: add sample code for how to use kobjects in a simple manner. kobject: update the kobject/kset documentation kobject: remove old, outdated documentation. ...
-
Pekka Enberg authored
If the node we're booting on doesn't have memory, bootstrapping kmalloc() caches resorts to fallback_alloc() which requires ->nodelists set for all nodes. Fix that by calling set_up_list3s() for CACHE_CACHE in kmem_cache_init(). As kmem_getpages() is called with GFP_THISNODE set, this used to work before because of breakage in 2.6.22 and before with GFP_THISNODE returning pages from the wrong node if a node had no memory. So it may have worked accidentally and in an unsafe manner because the pages would have been associated with the wrong node which could trigger bug ons and locking troubles. Tested-by:
Mel Gorman <mel@csn.ul.ie> Tested-by:
Olaf Hering <olaf@aepfle.de> Reviewed-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> [ With additional one-liner by Olaf Hering - Linus ] Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Karsten Keil authored
Fix overwriting the stack with the version string (it is currently 10 bytes + zero) when unloading the capidrv module. Safeguard against overwriting it should the version string grow in the future. Should fix Kernel Bug Tracker Bug 9696. Signed-off-by:
Gerd v. Egidy <gerd.von.egidy@intra2net.com> Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
