- 17 Feb, 2022 1 commit
-
-
Srinivas Pandruvada authored
Move the current driver from platform/x86/intel/uncore-frequency.c to platform/x86/intel/uncore-frequency/uncore-frequency.c. No functional changes are expected. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@intel.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220204000306.2517447-2-srinivas.pandruvada@linux.intel.comSigned-off-by:
Hans de Goede <hdegoede@redhat.com>
-
- 14 Feb, 2022 1 commit
-
-
David E. Box authored
Intel Software Defined Silicon (SDSi) is a post manufacturing mechanism for activating additional silicon features. Features are enabled through a license activation process. The SDSi driver provides a per socket, sysfs attribute interface for applications to perform 3 main provisioning functions: 1. Provision an Authentication Key Certificate (AKC), a key written to internal NVRAM that is used to authenticate a capability specific activation payload. 2. Provision a Capability Activation Payload (CAP), a token authenticated using the AKC and applied to the CPU configuration to activate a new feature. 3. Read the SDSi State Certificate, containing the CPU configuration state. The operations perform function specific mailbox commands that forward the requests to SDSi hardware to perform authentication of the payloads and enable the silicon configuration (to be made available after power cycling). The SDSi device itself is enumerated as an auxiliary device from the intel_vsec driver and as such has a build dependency on CONFIG_INTEL_VSEC. Link: https://github.com/intel/intel-sdsiSigned-off-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Mark Gross <markgross@kernel.org> Link: https://lore.kernel.org/r/20220212013252.1293396-2-david.e.box@linux.intel.comReviewed-by:
-
- 11 Feb, 2022 10 commits
-
-
Hans de Goede authored
Now that there is only 1 c-file left of the intel_cht_int33fe code, move it to the intel directory instead of it having its own int33fe sub-directory. Note this also renames the module from intel_cht_int33fe_typec to intel_chtwc_int33fe, to better match the names of other PMIC related modules like the intel_chtdc_ti_pwrbtn module. Signed-off-by:
-
Hans de Goede authored
Move the Lenovo Yogabook YB1-X9x fuel-gauge instantiation code over to the x86-android-tablets module, which already deals with this for various other devices. This removes the need to have a special intel_cht_int33fe_microb module just for Lenovo Yogabook YB1-X9x laptops. Signed-off-by:
-
Hans de Goede authored
The intel_cht_int33fe driver is intended to deal with ACPI INT33FE firmware-nodes on Cherry Trail devices with a Whiskey Cove PMIC. The original version of the driver only dealt with the GPD win and GPD pocket boards where the WC PMIC is connected to a TI BQ24292i charger, paired with a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller + a PI3USB30532 USB switch, for a fully functional Type-C port. Later it was split into a Type-C and a Micro-B variant to deal with the Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 boards where the ACPI INT33FE firmware-node only describes the TI BQ27542 fuelgauge. Currently the driver differentiates between these 2 models by counting the number of I2cSerialBus resources in the firmware-node. There are a number of problems with this approach: 1. The driver autoloads based on the acpi:INT33FE modalias causing it to get loaded on almost all Bay Trail and Cherry Trail devices. It checks for the presence of a WC PMIC, so it won't bind but the loading still wastes time and memory. 2. Both code paths in the driver are really only designed for a single board and have harcoded various assumptions about these boards, if another design matching the current checks ever shows up the driver may end up doing something completely wrong. Avoid both issues by switching to using DMI based autoloading of the module, which has neither of these problems. Note this splits the previous intel_cht_int33fe kernel module into two modules: intel_cht_int33fe_typec and intel_cht_int33fe_microb, one for each model. Signed-off-by:
-
Hans de Goede authored
Minor charger / fuel-gauge improvements: 1. Make some of the names of charger / fuel-gauge related globals more generic in preparation for also using them on other boards. 2. Update the dev_name on the Asus ME176C and TF103C to reflect that these are using the bq24297 variant of the bq24190 family. 3. During review of the ug3105 driver the "upi,rsns-microohm" property was renamed to "upisemi,rsns-microohm" as "upisemi" is the correct vendor prefix, update the ug3105 properties accordingly. Signed-off-by:
-
Hans de Goede authored
The Nextbook Ares 8 is a x86 ACPI tablet which ships with Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which are not actually there, causing various resource conflicts. Enumeration of these is skipped through the acpi_quirk_skip_i2c_client_enumeration(). Add support for manually instantiating the I2C devices which are actually present on this tablet by adding the necessary device info to the x86-android-tablets module. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220205191356.225505-6-hdegoede@redhat.com
-
Hans de Goede authored
Add the IRQ for the accelerometer to the Asus ME176C board info. Signed-off-by:
-
Hans de Goede authored
The Asus ME176C + TF103C both have a lid-switch (for a cover in the ME176C case), add a gpio-keys platform-device and platform-data describing the lid-switch on both. Note the "intel-int3496" in the asus_me176c_tf103c_pdevs[] array is not new / not a change. This was already present in the generic int3496_pdevs[] array, to which pdev_info pointed before. The int3496_pdevs[] array contains just this entry for boards which only need that single pdev. Signed-off-by:
-
Hans de Goede authored
Factor the code to go from a gpiochip label + pin-numer to a gpio_desc out of x86_acpi_irq_helper_get() and make it into a new x86_android_tablet_get_gpiod() helper, as this will be necessary in some x86_dev_info.init() functions too. Signed-off-by:
-
Hans de Goede authored
Add properties describing the battery on the Asus ME176C / TF103C tablets. The max constant charge volt / current settings were taken from the factory Android image on these tablets. Signed-off-by:
-
Hans de Goede authored
power_supply_get_battery_info() which is used by charger and fuel-gauge drivers on x86-android-tablets, expects the battery properties to be described in a stand-alone battery fwnode which is then referenced from both the charger and fuel-gauge device's fwnodes. Add support for registering + unregistering a swnode for this. Signed-off-by:
-
- 05 Feb, 2022 1 commit
-
-
Hans de Goede authored
The fan curve control patches introduced a regression for at least the TUF FX506 and possibly other TUF series laptops that do not have support for fan curve control. As part of the probing process, asus_wmi_evaluate_method_buf is called to get the factory default fan curve . The WMI management function returns 0 on certain laptops to indicate lack of fan curve control instead of ASUS_WMI_UNSUPPORTED_METHOD. This 0 is transformed to -ENODATA which results in failure when probing. Fixes: 0f0ac158 ("platform/x86: asus-wmi: Add support for custom fan curves") Reported-and-tested-by:
Abhijeet V <abhijeetviswa@gmail.com> Signed-off-by:
-
- 03 Feb, 2022 4 commits
-
-
Christophe JAILLET authored
's3_wmi.input' is a managed resource, so there should be no need to free it explicitly. Moreover, 's3_wmi' is a global variable. 's3_wmi.input' should be NULL when this error handling path is executed, because it has not been assigned yet. All this is puzzling. So simplify it and remove a few lines of code to have it be more straightforward. Fixes: 3dda3b37 ("platform/x86: Add custom surface3 platform device for controlling LID") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/8b1a6d05036d5d9527241b2345482b369331ce5c.1643531799.git.christophe.jaillet@wanadoo.frReviewed-by:
-
Rafael J. Wysocki authored
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by:
-
Rafael J. Wysocki authored
Replace acpi_bus_get_device() that is going to be dropped with acpi_fetch_acpi_dev(). No intentional functional impact. Signed-off-by:
-
Hans de Goede authored
The ThinkPad T15g Gen 2 has 2 fan, add a TPACPI_FAN_2CTL quirk entry for it to the fan_quirk_table[] so that both fans can be controllerd. Reported-and-tested-by:
David Dreschner <david@dreschner.net> Signed-off-by:
-
- 02 Feb, 2022 6 commits
-
-
Hans de Goede authored
This branch contains 5.17-rc1 + the SPI tree's spi-acpi-helpers tag + the other patches from the "[PATCH v6 0/9] Support Spi in i2c-multi-instantiate driver" series.
-
Lucas Tanure authored
The ACPI device with CSC3551 or CLSA0100 are sound cards with multiple instances of CS35L41 connected by I2C or SPI to the main CPU. We add an ID to the ignore_serial_bus_ids list to enumerate all I2C or SPI devices correctly. The same IDs are also added into serial-multi-instantiate so that the driver can correctly enumerate the ACPI. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Signed-off-by:
Stefan Binding <sbinding@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220121172431.6876-10-sbinding@opensource.cirrus.comReviewed-by:
-
Lucas Tanure authored
Add support for two and four CS35L41 using the component binding method Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20220121172431.6876-9-sbinding@opensource.cirrus.comSigned-off-by:
-
Stefan Binding authored
Add support for spi bus in serial-multi-instantiate driver Some peripherals can have either a I2C or a SPI connection to the host (but not both) but use the same HID for both types. So it is not possible to use the HID to determine whether it is I2C or SPI. The driver must check the node to see if it contains I2cSerialBus or SpiSerialBus entries. For backwards-compatibility with the existing nodes I2C is checked first and if such entries are found ONLY I2C devices are created. Since some existing nodes that were already handled by this driver could also contain unrelated SpiSerialBus nodes that were previously ignored, and this preserves that behavior. If there is ever a need to handle a node where both I2C and SPI devices must be instantiated this can be added in future. Signed-off-by:
-
Lucas Tanure authored
Reorganize I2C functions to accommodate SPI support Split the probe and factor out parts of the code that will be used in the SPI support Also switched from strlcpy() to strscpy() Signed-off-by:
-
Lucas Tanure authored
Rename I2C multi instantiate driver to serial-multi-instantiate for upcoming addition of SPI support Signed-off-by:
-
- 01 Feb, 2022 5 commits
-
-
Stefan Binding authored
Some ACPI nodes may have more than one Spi Resource. To be able to handle these case, its necessary to have a way of counting these resources. Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Stefan Binding authored
If a node contains more than one SPI resource it may be necessary to use an index to select which one you want to allocate a spi device for. Signed-off-by:
-
Stefan Binding authored
This can then be used to find a spi resource inside an ACPI node, and allocate a spi device. Signed-off-by:
-
Stefan Binding authored
This functions were previously made private since they were not used. However, these functions will be needed again. Partial revert of commit da21fde0 ("spi: Make several public functions private to spi.c") Signed-off-by:
-
Mark Pearson authored
Lenovo AMD based platforms have been offering platform_profiles but they are not working correctly. This is because the mode we are using on the Intel platforms (MMC) is not available on the AMD platforms. This commit adds checking of the functional capabilities returned by the BIOS to confirm if MMC is supported or not. Profiles will not be available if the platform is not MMC capable. I'm investigating and working on an alternative for AMD platforms but that is still work-in-progress. Signed-off-by:
Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20220127190358.4078-1-markpearson@lenovo.comReviewed-by:
-
- 24 Jan, 2022 12 commits
-
-
Mario Limonciello authored
Yellow carp has been outputting versions like `1093.24.0`, but this is supposed to be 69.24.0. That is the MSB is being interpreted incorrectly. The MSB is not part of the major version, but has generally been treated that way thus far. It's actually the program, and used to distinguish between two programs from a similar family but different codebase. Link: https://patchwork.freedesktop.org/patch/469993/Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20220120174439.12770-1-mario.limonciello@amd.comReviewed-by:
-
Hans de Goede authored
tf103c_dock_hid_ll_driver and tf103c_dock_pm_ops are not used outside of the driver, make them both static. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Hans de Goede authored
amd_pmc_stb_debugfs_fops is not used outside of amd-pmc.c, make it static. Cc: Sanket Goswami <Sanket.Goswami@amd.com> Reported-by:
-
Srinivas Pandruvada authored
As reported: [ 256.104522] ====================================================== [ 256.113783] WARNING: possible circular locking dependency detected [ 256.120093] 5.16.0-rc6-yocto-standard+ #99 Not tainted [ 256.125362] ------------------------------------------------------ [ 256.131673] intel-speed-sel/844 is trying to acquire lock: [ 256.137290] ffffffffc036f0d0 (punit_misc_dev_lock){+.+.}-{3:3}, at: isst_if_open+0x18/0x90 [isst_if_common] [ 256.147171] [ 256.147171] but task is already holding lock: [ 256.153135] ffffffff8ee7cb50 (misc_mtx){+.+.}-{3:3}, at: misc_open+0x2a/0x170 [ 256.160407] [ 256.160407] which lock already depends on the new lock. [ 256.160407] [ 256.168712] [ 256.168712] the existing dependency chain (in reverse order) is: [ 256.176327] [ 256.176327] -> #1 (misc_mtx){+.+.}-{3:3}: [ 256.181946] lock_acquire+0x1e6/0x330 [ 256.186265] __mutex_lock+0x9b/0x9b0 [ 256.190497] mutex_lock_nested+0x1b/0x20 [ 256.195075] misc_register+0x32/0x1a0 [ 256.199390] isst_if_cdev_register+0x65/0x180 [isst_if_common] [ 256.205878] isst_if_probe+0x144/0x16e [isst_if_mmio] ... [ 256.241976] [ 256.241976] -> #0 (punit_misc_dev_lock){+.+.}-{3:3}: [ 256.248552] validate_chain+0xbc6/0x1750 [ 256.253131] __lock_acquire+0x88c/0xc10 [ 256.257618] lock_acquire+0x1e6/0x330 [ 256.261933] __mutex_lock+0x9b/0x9b0 [ 256.266165] mutex_lock_nested+0x1b/0x20 [ 256.270739] isst_if_open+0x18/0x90 [isst_if_common] [ 256.276356] misc_open+0x100/0x170 [ 256.280409] chrdev_open+0xa5/0x1e0 ... The call sequence suggested that misc_device /dev file can be opened before misc device is yet to be registered, which is done only once. Here punit_misc_dev_lock was used as common lock, to protect the registration by multiple ISST HW drivers, one time setup, prevent duplicate registry of misc device and prevent load/unload when device is open. We can split into locks: - One which just prevent duplicate call to misc_register() and one time setup. Also never call again if the misc_register() failed or required one time setup is failed. This lock is not shared with any misc device callbacks. - The other lock protects registry, load and unload of HW drivers. Sequence in isst_if_cdev_register() - Register callbacks under punit_misc_dev_open_lock - Call isst_misc_reg() which registers misc_device on the first registry which is under punit_misc_dev_reg_lock, which is not shared with callbacks. Sequence in isst_if_cdev_unregister Just opposite of isst_if_cdev_register Reported-and-tested-by:Liwei Song <liwei.song@windriver.com> Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Link: https://lore.kernel.org/r/20220112022521.54669-1-srinivas.pandruvada@linux.intel.comReviewed-by:
-
Hans de Goede authored
The driver as originally submitted accidentally relied on Android having run before and Android having unmasked the 2nd level IRQ-mask for the charger IRQ. This worked since these are PMIC registers which are only reset when the battery is fully drained or disconnected. Fix the charger IRQ no longer working after loss of battery power by properly setting the 2nd level IRQ-mask for the charger IRQ. Note this removes the need to enable/disable our parent IRQ which just sets the mask bit in the 1st level IRQ-mask register, setting one of the 2 level masks is enough to stop the IRQ from getting reported. Fixes: 761db353 ("platform/x86: Add intel_crystal_cove_charger driver") Signed-off-by:
-
Alexander Kobel authored
Some ThinkPad models, like the X1 Tablet 1st and 2nd Gen, are passively cooled without any fan. Currently, an entry in /proc/acpi/ibm/fan is nevertheless created, and misleadingly shows status: enabled speed: 65535 level: auto This patch adds a TPACPI_FAN_NOFAN quirk definition and corresponding handling to not initialize a fan interface at all. For the time being, the quirk is only applied for X1 Tablet 2nd Gen (types 20JB, 20JC; EC N1O...); further models (such as Gen1, types 20GG and 20GH) can be added easily once tested. Tested on a 20JCS00C00, BIOS N1OET58W (1.43), EC N1OHT34W. Signed-off-by:
Alexander Kobel <a-kobel@a-kobel.de> Link: https://lore.kernel.org/r/12d4b825-a2b9-8cb7-6ed3-db4d66f46a60@a-kobel.deReviewed-by:
-
Yuka Kawajiri authored
Add touchscreen info for RWC NANOTE P8 (AY07J) 2-in-1. Signed-off-by:
Yuka Kawajiri <yukx00@gmail.com> Link: https://lore.kernel.org/r/20220111154019.4599-1-yukx00@gmail.comReviewed-by:
-
Geert Uytterhoeven authored
Microsoft Surface platform-specific devices are only present on Microsoft Surface platforms, which are currently limited to arm64 and x86. Hence add a dependency on ARM64 || X86, to prevent asking the user about drivers for these devices when configuring a kernel for an architecture that does not support Microsoft Surface platforms. Fixes: 27247992 ("platform: surface: Propagate ACPI Dependency") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Lubomir Rintel authored
Bring balance to the quoting of Hans' e-mail address. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20220110063629.273364-1-lkundrak@v3.skSigned-off-by:
-
Lubomir Rintel authored
This switches the P10T tablet to "Android" mode, where the Home button sends a single sancode instead of a Windows-specific key combination and the other button doesn't disable the Wi-Fi. Signed-off-by:
-
Hans de Goede authored
The individual gpiod_lookup_table structs cannot be const because they contain a list-head which gets used when registering them. But the array of pointers to the gpiod_lookup_table-s used by a board can be const, constify these. Signed-off-by:
-
Hans de Goede authored
Add an init() callback to struct x86_dev_info, board descriptions can use this to do some custom setup before registering the i2c_clients, platform- devices and servdevs. Also add an exit() callback to also allow for cleanup of the custom setup. Signed-off-by:
-
