- 01 Apr, 2016 8 commits
-
-
David S. Miller authored
Giuseppe Cavallaro says: ==================== stmmac MDIO and normal descr fixes This patch series is to fix the problems below and recently debugged in this mailing list: o to fix a problem for the HW where the normal descriptor o to fix the mdio registration according to the different platform configurations I am resending all the patches again: built on top of net.git repo. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Giuseppe CAVALLARO authored
Initially the phy_bus_name was added to manipulate the driver name but it was recently just used to manage the fixed-link and then to take some decision at run-time. So the patch uses the is_pseudo_fixed_link and removes the phy_bus_name variable not necessary anymore. The driver can manage the mdio registration by using phy-handle, dwmac-mdio and own parameter e.g. snps,phy-addr. This patch takes care about all these possible configurations and fixes the mdio registration in case of there is a real transceiver or a switch (that needs to be managed by using fixed-link). Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by:
Andreas Färber <afaerber@suse.de> Tested-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Cc: Gabriel Fernandez <gabriel.fernandez@linaro.org> Cc: Dinh Nguyen <dinh.linux@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Phil Reid <preid@electromag.com.au> Signed-off-by:
-
Giuseppe CAVALLARO authored
This reverts commit 88f8b1bb. due to problems on GeekBox and Banana Pi M1 board when connected to a real transceiver instead of a switch via fixed-link. Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch fixs a regression raised when test on chips that use the normal descriptor layout. In fact, no len bits were set for the TDES1 and no OWN bit inside the TDES0. Signed-off-by:
-
Jisheng Zhang authored
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Suggested-by:
Marcin Wojtas <mw@semihalf.com> Signed-off-by:
-
Jisheng Zhang authored
L1_CACHE_BYTES may not be the real cacheline size, use cache_line_size to determine the cacheline size in runtime. Signed-off-by:
-
Jisheng Zhang authored
This is to fix the following maybe-uninitialized warning: drivers/net/ethernet/marvell/mvpp2.c:6007:18: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] Signed-off-by:
-
Daniel Borkmann authored
Sasha Levin reported a suspicious rcu_dereference_protected() warning found while fuzzing with trinity that is similar to this one: [ 52.765684] net/core/filter.c:2262 suspicious rcu_dereference_protected() usage! [ 52.765688] other info that might help us debug this: [ 52.765695] rcu_scheduler_active = 1, debug_locks = 1 [ 52.765701] 1 lock held by a.out/1525: [ 52.765704] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff816a64b7>] rtnl_lock+0x17/0x20 [ 52.765721] stack backtrace: [ 52.765728] CPU: 1 PID: 1525 Comm: a.out Not tainted 4.5.0+ #264 [...] [ 52.765768] Call Trace: [ 52.765775] [<ffffffff813e488d>] dump_stack+0x85/0xc8 [ 52.765784] [<ffffffff810f2fa5>] lockdep_rcu_suspicious+0xd5/0x110 [ 52.765792] [<ffffffff816afdc2>] sk_detach_filter+0x82/0x90 [ 52.765801] [<ffffffffa0883425>] tun_detach_filter+0x35/0x90 [tun] [ 52.765810] [<ffffffffa0884ed4>] __tun_chr_ioctl+0x354/0x1130 [tun] [ 52.765818] [<ffffffff8136fed0>] ? selinux_file_ioctl+0x130/0x210 [ 52.765827] [<ffffffffa0885ce3>] tun_chr_ioctl+0x13/0x20 [tun] [ 52.765834] [<ffffffff81260ea6>] do_vfs_ioctl+0x96/0x690 [ 52.765843] [<ffffffff81364af3>] ? security_file_ioctl+0x43/0x60 [ 52.765850] [<ffffffff81261519>] SyS_ioctl+0x79/0x90 [ 52.765858] [<ffffffff81003ba2>] do_syscall_64+0x62/0x140 [ 52.765866] [<ffffffff817d563f>] entry_SYSCALL64_slow_path+0x25/0x25 Same can be triggered with PROVE_RCU (+ PROVE_RCU_REPEATEDLY) enabled from tun_attach_filter() when user space calls ioctl(tun_fd, TUN{ATTACH, DETACH}FILTER, ...) for adding/removing a BPF filter on tap devices. Since the fix in f91ff5b9 ("net: sk_{detach|attach}_filter() rcu fixes") sk_attach_filter()/sk_detach_filter() now dereferences the filter with rcu_dereference_protected(), checking whether socket lock is held in control path. Since its introduction in 99405162 ("tun: socket filter support"), tap filters are managed under RTNL lock from __tun_chr_ioctl(). Thus the sock_owned_by_user(sk) doesn't apply in this specific case and therefore triggers the false positive. Extend the BPF API with __sk_attach_filter()/__sk_detach_filter() pair that is used by tap filters and pass in lockdep_rtnl_is_held() for the rcu_dereference_protected() checks instead. Reported-by:Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
- 31 Mar, 2016 8 commits
-
-
Daniele Palmas authored
Telit LE910 V2 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Reviewed-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Nicolas Dichtel authored
Size of the attribute IFLA_PHYS_PORT_NAME was missing. Fixes: db24a904 ("net: add support for phys_port_name") CC: David Ahern <dsahern@gmail.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Fabio Estevam authored
Commit 55cd48c8 ("net: fec: stop the "rcv is not +last, " error messages") introduces a write to a register that does not exist in Coldfire. Move the FEC_FTRL register access inside the FEC_QUIRK_HAS_RACC 'if' block, so that we guarantee it will not be used on Coldfire CPUs. Reported-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Jisheng Zhang authored
The mvneta is also used in some Marvell berlin family SoCs which may have 64bytes cacheline size. Replace the MVNETA_CPU_D_CACHE_LINE_SIZE usage with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by:
-
Jisheng Zhang authored
The mvpp2 ip maybe used in SoCs which may have have 64bytes cacheline size. Replace the MVPP2_CPU_D_CACHE_LINE_SIZE with L1_CACHE_BYTES. And since dma_alloc_coherent() is always cacheline size aligned, so remove the align checks. Signed-off-by:
-
Patrick Uiterwijk authored
Some of the vendor-specific bootloaders set up this part of the initialization for us, so this was never added. However, since upstream bootloaders don't initialize the chip specifically, they leave the fiber MII's PDOWN flag set, which means that the CPU port doesn't connect. This patch checks whether this flag has been clear prior by something else, and if not make us clear it. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Patrick Uiterwijk <patrick@puiterwijk.org> Tested-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Patrick Uiterwijk authored
Add versions of the phy_page_read and _write functions to be used in a context where the SMI mutex is held. Tested-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-03-29 This series contains fixes to ixgbe and ixgbevf. Tushar fixes an issue which was introduced with an earlier commit, where hardware register RAR0 default MAC address does not get set properly. Alex fixes two issues, first being the VXLAN port number should be stored in network order instead of in host order. The second fix corrects the ATR code to handle IPv6 extension headers. The issue was ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through, but that is not the case, which resulted in bad filters being setup. Mark fixes a use of usleep_range() to udelay() in the case where a lock is being held. Stefan fixes the offline self tests where ndo_stop() should be used instead of ndo_close(), which causes IFF_UP to be cleared and interface routes get removed. Emil fixes the error case where we need to return an error when a MAC address change is rejected by the PF. This helps prevent the user from modifying the MAC address when the operation is not permitted. Sridhar provides three fixes for ixgbe, all dealing with traffic class offload handling. ==================== Signed-off-by:
-
- 30 Mar, 2016 22 commits
-
-
Daniel Borkmann authored
Make the 2 byte padding in struct bpf_tunnel_key between tunnel_ttl and tunnel_label members explicit. No issue has been observed, and gcc/llvm does padding for the old struct already, where tunnel_label was not yet present, so the current code works, but since it's part of uapi, make sure we don't introduce holes in structs. Therefore, add tunnel_ext that we can use generically in future (f.e. to flag OAM messages for backends, etc). Also add the offset to the compat tests to be sure should some compilers not padd the tail of the old version of bpf_tunnel_key. Fixes: 4018ab18 ("bpf: support flow label for bpf_skb_{set, get}_tunnel_key") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Eric Dumazet authored
IPv6 counters updates use a different macro than IPv4. Fixes: 36cbb245 ("udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicasts") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Michael Chan authored
To report flow control tx/rx settings accurately regardless of autoneg setting, we should use link_info->req_flow_ctrl. Before this patch, the reported settings were only correct when autoneg was on. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
The typo caused the wrong flow control bit to be set. Reported by: Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
-
Michael Chan authored
The size of every padded firmware message is specified in the first HWRM_VER_GET response message. Use this value to pad every message after that. Signed-off-by:
-
Prashant Sreedharan authored
The existing code does the following: allocate completion ring initialize completion ring doorbell disable interrupts on this completion ring by writing to the doorbell We can have a race where firmware sends an asynchronous event to the host after completion ring allocation and before doorbell is initialized. When this happens driver can crash while ringing the doorbell using uninitialized value as part of handling the IRQ/napi request. Signed-off-by:Prashant Sreedharan <prashant.sreedharan@broadcom.com> Signed-off-by:
-
Xin Long authored
There is an issue when we use mavtap over team: When we replug nic links from team0, the real nics's mc list will not include the maddr for macvtap any more. then we can't receive pkts to macvtap device, as they are filterred by mc list of nic. In Bonding Driver, it syncs the uc/mc addrs in bond_enslave(). We will fix this issue on team by adding the port's uc/mc addrs sync in team_port_add. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Alexander Duyck authored
This patch should fix the issues seen with a recent fix to prevent tunnel-in-tunnel frames from being generated with GRO. The fix itself is correct for now as long as we do not add any devices that support NETIF_F_GSO_GRE_CSUM. When such a device is added it could have the potential to mess things up due to the fact that the outer transport header points to the outer UDP header and not the GRE header as would be expected. Fixes: fac8e0f5 ("tunnels: Don't apply GRO to multiple layers of encapsulation.") Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Signed-off-by:
-
Colin Ian King authored
in the case where qed_slowpath_irq_req is not called, rc is not assigned and so qed_int_igu_enable will return a garbage value. Fix this by initializing rc to 0. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
Somehow my patch for commit cea8768f ("sctp: allow sctp_transmit_packet and others to use gfp") missed two important chunks, which are now added. Fixes: cea8768f ("sctp: allow sctp_transmit_packet and others to use gfp") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-By:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Haishuang Yan authored
When NET_SWITCHDEV=n, switchdev_port_attr_set will return -EOPNOTSUPP, we should ignore this error code and continue to set the ageing time. Fixes: c62987bb ("bridge: push bridge setting ageing_time down to switchdev") Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Sridhar Samudrala authored
Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Sridhar Samudrala authored
Remove the incorrect check for mask in ixgbe_configure_clsu32 and drop the 'mask' field that is not required in struct ixgbe_mat_field Verified with the following filters: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip dst 10.0.0.1/8 match ip src 10.0.0.2/8 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip dst 11.0.0.1/16 match ip src 11.0.0.2/16 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:3 u32 ht 800: \ match ip dst 12.0.0.1/24 match ip src 12.0.0.2/24 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:4 u32 ht 800: \ match ip dst 13.0.0.1/32 match ip src 13.0.0.2/32 action drop Signed-off-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Sridhar Samudrala authored
Check for handle ids when adding/deleting hash nodes OR adding/deleting filter entries and limit them to max number of links or header nodes supported(IXGBE_MAX_LINK_HANDLE). Start from bit 0 when setting hash table bit-map.(adapter->tables) Signed-off-by:
-
Emil Tantilov authored
This function is only used in ixgbe_main.c Resolves a "missing prototype" warning when building the driver with W=1 Reported-by:
Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by:
Emil Tantilov <emil.s.tantilov@intel.com> Acked-by:
-
Emil Tantilov authored
Return error when a MAC address change is rejected by the PF. This will prevent the user from modifying the MAC address when that operation is not permitted. Signed-off-by:
-
Stefan Assmann authored
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
Stefan Assmann authored
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by:
-
Mark Rustad authored
Use udelay instead of usleep_range because this can be called while a lock is held. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
-
Alexander Duyck authored
The ATR code was assuming that it would be able to use tcp_hdr for every TCP frame that came through. However this isn't the case as it is possible for a frame to arrive that is TCP but sent through something like a raw socket. As a result the driver was setting up bad filters in which tcp_hdr was really pointing to the network header so the data was all invalid. In order to correct this I have added a bit of parsing logic that will determine the TCP header location based off of the network header and either the offset in the case of the IPv4 header, or a walk through the IPv6 extension headers until it encounters the header that indicates IPPROTO_TCP. In addition I have added checks to verify that the lowest protocol provided is recognized as IPv4 or IPv6 to help mitigate raw sockets using ETH_P_ALL from having ATR applied to them. Signed-off-by:
-
Alexander Duyck authored
The VXLAN port number should be stored in network order instead of in host order as it is accessed from the hot-path in ATR. This way we can avoid having to do any byte swaps in order to validate the port number. I moved the vxlan_port value into a hole in the read-mostly region of the adapter struct. This way it should be in a warm cache-line instead of in some isolated region in memory when it needs to be accessed. In addition I went through and stripped a bunch of unneeded ifdef flags since having an extra variable present doesn't really hurt anything and makes the code easier to read. I also went through and dropped the NETIF_F_RXCSUM flag which was being set in hw_encap_features but provides no value as the flag is not evaluated in the Rx path. Signed-off-by:
-
Tushar Dave authored
commit c9f53e63 ("ixgbe: Refactor MAC address configuration code") introduced code that doesn't set HW register RAR0 to default mac address but FF:FF:FF:FF:FF:FF. Due to this, ixgbe HW discards all incoming packets that doesn't have destination mac address equals to FF:FF:FF:FF:FF:FF. This commit sets RAR0 correctly to default HW mac address. Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Tested-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
- 29 Mar, 2016 1 commit
-
-
Bjørn Mork authored
Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
-
- 28 Mar, 2016 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for you net tree, they are: 1) There was a race condition between parallel save/swap and delete, which resulted a kernel crash due to the increase ref for save, swap, wrong ref decrease operations. Reported and fixed by Vishwanath Pai. 2) OVS should call into CT NAT for packets of new expected connections only when the conntrack state is persisted with the 'commit' option to the OVS CT action. From Jarno Rajahalme. 3) Resolve kconfig dependencies with new OVS NAT support. From Arnd Bergmann. 4) Early validation of entry->target_offset to make sure it doesn't take us out from the blob, from Florian Westphal. 5) Again early validation of entry->next_offset to make sure it doesn't take out from the blob, also from Florian. 6) Check that entry->target_offset is always of of sizeof(struct xt_entry) for unconditional entries, when checking both from check_underflow() and when checking for loops in mark_source_chains(), again from Florian. 7) Fix inconsistent behaviour in nfnetlink_queue when NFQA_CFG_F_FAIL_OPEN is set and netlink_unicast() fails due to buffer overrun, we have to reinject the packet as the user expects. 8) Enforce nul-terminated table names from getsockopt GET_ENTRIES requests. 9) Don't assume skb->sk is set from nft_bridge_reject and synproxy, this fixes a recent update of the code to namespaceify ip_default_ttl, patch from Liping Zhang. This batch comes with four patches to validate x_tables blobs coming from userspace. CONFIG_USERNS exposes the x_tables interface to unpriviledged users and to be honest this interface never received the attention for this move away from the CAP_NET_ADMIN domain. Florian is working on another round with more patches with more sanity checks, so expect a bit more Netfilter fixes in this development cycle than usual. ==================== Signed-off-by:
-
