- 29 Oct, 2020 2 commits
-
-
Tung Nguyen authored
Commit ed42989e ("tipc: fix the skb_unshare() in tipc_buf_append()") replaced skb_unshare() with skb_copy() to not reduce the data reference counter of the original skb intentionally. This is not the correct way to handle the cloned skb because it causes memory leak in 2 following cases: 1/ Sending multicast messages via broadcast link The original skb list is cloned to the local skb list for local destination. After that, the data reference counter of each skb in the original list has the value of 2. This causes each skb not to be freed after receiving ACK: tipc_link_advance_transmq() { ... /* release skb */ __skb_unlink(skb, &l->transmq); kfree_skb(skb); <-- memory exists after being freed } 2/ Sending multicast messages via replicast link Similar to the above case, each skb cannot be freed after purging the skb list: tipc_mcast_xmit() { ... __skb_queue_purge(pkts); <-- memory exists after being freed } This commit fixes this issue by using skb_unshare() instead. Besides, to avoid use-after-free error reported by KASAN, the pointer to the fragment is set to NULL before calling skb_unshare() to make sure that the original skb is not freed after freeing the fragment 2 times in case skb_unshare() returns NULL. Fixes: ed42989e ("tipc: fix the skb_unshare() in tipc_buf_append()") Acked-by:
Jon Maloy <jmaloy@redhat.com> Reported-by:
Thang Hoang Ngo <thang.h.ngo@dektech.com.au> Signed-off-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20201027032403.1823-1-tung.q.nguyen@dektech.com.auSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Masahiro Fujiwara authored
*_pdp_find() from gtp_encap_recv() would trigger a crash when a peer sends GTP packets while creating new GTP device. RIP: 0010:gtp1_pdp_find.isra.0+0x68/0x90 [gtp] <SNIP> Call Trace: <IRQ> gtp_encap_recv+0xc2/0x2e0 [gtp] ? gtp1_pdp_find.isra.0+0x90/0x90 [gtp] udp_queue_rcv_one_skb+0x1fe/0x530 udp_queue_rcv_skb+0x40/0x1b0 udp_unicast_rcv_skb.isra.0+0x78/0x90 __udp4_lib_rcv+0x5af/0xc70 udp_rcv+0x1a/0x20 ip_protocol_deliver_rcu+0xc5/0x1b0 ip_local_deliver_finish+0x48/0x50 ip_local_deliver+0xe5/0xf0 ? ip_protocol_deliver_rcu+0x1b0/0x1b0 gtp_encap_enable() should be called after gtp_hastable_new() otherwise *_pdp_find() will access the uninitialized hash table. Fixes: 1e3a3abd ("gtp: make GTP sockets in gtp_newlink optional") Signed-off-by:
Masahiro Fujiwara <fujiwara.masahiro@gmail.com> Link: https://lore.kernel.org/r/20201027114846.3924-1-fujiwara.masahiro@gmail.comSigned-off-by:
-
- 28 Oct, 2020 6 commits
-
-
Leon Romanovsky authored
The tcf_block_unbind() expects that the caller will take block->cb_lock before calling it, however the code took RTNL lock and dropped cb_lock instead. This causes to the following kernel panic. WARNING: CPU: 1 PID: 13524 at net/sched/cls_api.c:1488 tcf_block_unbind+0x2db/0x420 Modules linked in: mlx5_ib mlx5_core mlxfw ptp pps_core act_mirred act_tunnel_key cls_flower vxlan ip6_udp_tunnel udp_tunnel dummy sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad ib_ipoib rdma_cm iw_cm ib_cm ib_uverbs ib_core overlay [last unloaded: mlxfw] CPU: 1 PID: 13524 Comm: test-ecmp-add-v Tainted: G W 5.9.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:tcf_block_unbind+0x2db/0x420 Code: ff 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8d bc 24 30 01 00 00 be ff ff ff ff e8 7d 7f 70 00 85 c0 0f 85 7b fd ff ff <0f> 0b e9 74 fd ff ff 48 c7 c7 dc 6a 24 84 e8 02 ec fe fe e9 55 fd RSP: 0018:ffff888117d17968 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88812f713c00 RCX: 1ffffffff0848d5b RDX: 0000000000000001 RSI: ffff88814fbc8130 RDI: ffff888107f2b878 RBP: 1ffff11022fa2f3f R08: 0000000000000000 R09: ffffffff84115a87 R10: fffffbfff0822b50 R11: ffff888107f2b898 R12: ffff88814fbc8000 R13: ffff88812f713c10 R14: ffff888117d17a38 R15: ffff88814fbc80c0 FS: 00007f6593d36740(0000) GS:ffff8882a4f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005607a00758f8 CR3: 0000000131aea006 CR4: 0000000000170ea0 Call Trace: tc_block_indr_cleanup+0x3e0/0x5a0 ? tcf_block_unbind+0x420/0x420 ? __mutex_unlock_slowpath+0xe7/0x610 flow_indr_dev_unregister+0x5e2/0x930 ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? flow_indr_block_cb_alloc+0x3c0/0x3c0 ? mlx5_db_free+0x37c/0x4b0 [mlx5_core] mlx5e_cleanup_rep_tx+0x8b/0xc0 [mlx5_core] mlx5e_detach_netdev+0xe5/0x120 [mlx5_core] mlx5e_vport_rep_unload+0x155/0x260 [mlx5_core] esw_offloads_disable+0x227/0x2b0 [mlx5_core] mlx5_eswitch_disable_locked.cold+0x38e/0x699 [mlx5_core] mlx5_eswitch_disable+0x94/0xf0 [mlx5_core] mlx5_device_disable_sriov+0x183/0x1f0 [mlx5_core] mlx5_core_sriov_configure+0xfd/0x230 [mlx5_core] sriov_numvfs_store+0x261/0x2f0 ? sriov_drivers_autoprobe_store+0x110/0x110 ? sysfs_file_ops+0x170/0x170 ? sysfs_file_ops+0x117/0x170 ? sysfs_file_ops+0x170/0x170 kernfs_fop_write+0x1ff/0x3f0 ? rcu_read_lock_any_held+0x6e/0x90 vfs_write+0x1f3/0x620 ksys_write+0xf9/0x1d0 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3f0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 <...> ---[ end trace bfdd028ada702879 ]--- Fixes: 0fdcf78d ("net: use flow_indr_dev_setup_offload()") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20201026123327.1141066-1-leon@kernel.orgSigned-off-by:
-
Thomas Bogendoerfer authored
The check for src mac address in ibmveth_is_packet_unsupported is wrong. Commit 6f227543 wanted to shut down messages for loopback packets, but now suppresses bridged frames, which are accepted by the hypervisor otherwise bridging won't work at all. Fixes: 6f227543 ("ibmveth: Detect unsupported packets before sending to the hypervisor") Signed-off-by:
Michal Suchanek <msuchanek@suse.de> Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://lore.kernel.org/r/20201026104221.26570-1-msuchanek@suse.deSigned-off-by:
-
Guillaume Nault authored
TCA_MPLS_ACT_PUSH and TCA_MPLS_ACT_MAC_PUSH might be used on gso packets. Such packets will thus require mpls_gso.ko for segmentation. v2: Drop dependency on CONFIG_NET_MPLS_GSO in Kconfig (from Jakub and David). Fixes: 2a2ea508 ("net: sched: add mpls manipulation actions to TC") Signed-off-by:Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/1f6cab15bbd15666795061c55563aaf6a386e90e.1603708007.git.gnault@redhat.comSigned-off-by:
-
Andrew Gabbasov authored
In the function ravb_hwtstamp_get() in ravb_main.c with the existing values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL (0x6) if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL) config.rx_filter = HWTSTAMP_FILTER_ALL; if the test on RAVB_RXTSTAMP_TYPE_ALL should be true, it will never be reached. This issue can be verified with 'hwtstamp_config' testing program (tools/testing/selftests/net/hwtstamp_config.c). Setting filter type to ALL and subsequent retrieving it gives incorrect value: $ hwtstamp_config eth0 OFF ALL flags = 0 tx_type = OFF rx_filter = ALL $ hwtstamp_config eth0 flags = 0 tx_type = OFF rx_filter = PTP_V2_L2_EVENT Correct this by converting if-else's to switch. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reported-by:
Julia Lawall <julia.lawall@inria.fr> Signed-off-by:
Andrew Gabbasov <andrew_gabbasov@mentor.com> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@gmail.com> Link: https://lore.kernel.org/r/20201026102130.29368-1-andrew_gabbasov@mentor.comSigned-off-by:
-
Dan Carpenter authored
This needs to unlock before returning. Fixes: 544e7c33 ("net: devlink: Add support for port regions") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwandaSigned-off-by:
-
Dan Carpenter authored
These paths don't set the error codes. It's especially important in devlink_nl_region_notify_build() where it leads to a NULL dereference in the caller. Fixes: 544e7c33 ("net: devlink: Add support for port regions") Signed-off-by:
-
- 27 Oct, 2020 9 commits
-
-
Vinay Kumar Yadav authored
CPL handler functions chtls_pass_open_rpl() and chtls_close_listsrv_rpl() should return CPL_RET_BUF_DONE so that caller function will do skb free to avoid leak. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Link: https://lore.kernel.org/r/20201025194228.31271-1-vinay.yadav@chelsio.comSigned-off-by:
-
Vinay Kumar Yadav authored
In chtls_pass_establish() we hold child socket lock using bh_lock_sock and we are again trying bh_lock_sock in add_to_reap_list, causing deadlock. Remove bh_lock_sock in add_to_reap_list() as lock is already held. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by:
-
Zenghui Yu authored
When unbinding the hns3 driver with the HNS3 VF, I got the following kernel panic: [ 265.709989] Unable to handle kernel paging request at virtual address ffff800054627000 [ 265.717928] Mem abort info: [ 265.720740] ESR = 0x96000047 [ 265.723810] EC = 0x25: DABT (current EL), IL = 32 bits [ 265.729126] SET = 0, FnV = 0 [ 265.732195] EA = 0, S1PTW = 0 [ 265.735351] Data abort info: [ 265.738227] ISV = 0, ISS = 0x00000047 [ 265.742071] CM = 0, WnR = 1 [ 265.745055] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000009b54000 [ 265.751753] [ffff800054627000] pgd=0000202ffffff003, p4d=0000202ffffff003, pud=00002020020eb003, pmd=00000020a0dfc003, pte=0000000000000000 [ 265.764314] Internal error: Oops: 96000047 [#1] SMP [ 265.830357] CPU: 61 PID: 20319 Comm: bash Not tainted 5.9.0+ #206 [ 265.836423] Hardware name: Huawei TaiShan 2280 V2/BC82AMDDA, BIOS 1.05 09/18/2019 [ 265.843873] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) [ 265.843890] pc : hclgevf_cmd_uninit+0xbc/0x300 [ 265.861988] lr : hclgevf_cmd_uninit+0xb0/0x300 [ 265.861992] sp : ffff80004c983b50 [ 265.881411] pmr_save: 000000e0 [ 265.884453] x29: ffff80004c983b50 x28: ffff20280bbce500 [ 265.889744] x27: 0000000000000000 x26: 0000000000000000 [ 265.895034] x25: ffff800011a1f000 x24: ffff800011a1fe90 [ 265.900325] x23: ffff0020ce9b00d8 x22: ffff0020ce9b0150 [ 265.905616] x21: ffff800010d70e90 x20: ffff800010d70e90 [ 265.910906] x19: ffff0020ce9b0080 x18: 0000000000000004 [ 265.916198] x17: 0000000000000000 x16: ffff800011ae32e8 [ 265.916201] x15: 0000000000000028 x14: 0000000000000002 [ 265.916204] x13: ffff800011ae32e8 x12: 0000000000012ad8 [ 265.946619] x11: ffff80004c983b50 x10: 0000000000000000 [ 265.951911] x9 : ffff8000115d0888 x8 : 0000000000000000 [ 265.951914] x7 : ffff800011890b20 x6 : c0000000ffff7fff [ 265.951917] x5 : ffff80004c983930 x4 : 0000000000000001 [ 265.951919] x3 : ffffa027eec1b000 x2 : 2b78ccbbff369100 [ 265.964487] x1 : 0000000000000000 x0 : ffff800054627000 [ 265.964491] Call trace: [ 265.964494] hclgevf_cmd_uninit+0xbc/0x300 [ 265.964496] hclgevf_uninit_ae_dev+0x9c/0xe8 [ 265.964501] hnae3_unregister_ae_dev+0xb0/0x130 [ 265.964516] hns3_remove+0x34/0x88 [hns3] [ 266.009683] pci_device_remove+0x48/0xf0 [ 266.009692] device_release_driver_internal+0x114/0x1e8 [ 266.030058] device_driver_detach+0x28/0x38 [ 266.034224] unbind_store+0xd4/0x108 [ 266.037784] drv_attr_store+0x40/0x58 [ 266.041435] sysfs_kf_write+0x54/0x80 [ 266.045081] kernfs_fop_write+0x12c/0x250 [ 266.049076] vfs_write+0xc4/0x248 [ 266.052378] ksys_write+0x74/0xf8 [ 266.055677] __arm64_sys_write+0x24/0x30 [ 266.059584] el0_svc_common.constprop.3+0x84/0x270 [ 266.064354] do_el0_svc+0x34/0xa0 [ 266.067658] el0_svc+0x38/0x40 [ 266.070700] el0_sync_handler+0x8c/0xb0 [ 266.074519] el0_sync+0x140/0x180 It looks like the BAR memory region had already been unmapped before we start clearing CMDQ registers in it, which is pretty bad and the kernel happily kills itself because of a Current EL Data Abort (on arm64). Moving the CMDQ uninitialization a bit early fixes the issue for me. Fixes: 862d969a ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Link: https://lore.kernel.org/r/20201023051550.793-1-yuzenghui@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes. These 5 bug fixes are all related to the firmware reset or AER recovery. 2 patches fix the cleanup logic for the workqueue used to handle firmware reset and recovery. 1 patch ensures that the chip will have the proper BAR addresses latched after fatal AER recovery. 1 patch fixes the open path to check for firmware reset abort error. The last one sends the fw reset command unconditionally to fix the AER reset logic. ==================== Link: https://lore.kernel.org/r/1603685901-17917-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
Vasundhara Volam authored
In the AER or firmware reset flow, if we are in fatal error state or if pci_channel_offline() is true, we don't send any commands to the firmware because the commands will likely not reach the firmware and most commands don't matter much because the firmware is likely to be reset imminently. However, the HWRM_FUNC_RESET command is different and we should always attempt to send it. In the AER flow for example, the .slot_reset() call will trigger this fw command and we need to try to send it to effect the proper reset. Fixes: b340dc68 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
bnxt_open_nic() is called during configuration changes that require the NIC to be closed and then opened. This call is protected by rtnl_lock. Firmware reset can be happening at the same time. Only critical portions of the entire firmware reset sequence are protected by the rtnl_lock. It is possible that bnxt_open_nic() can be called when the firmware reset sequence is aborting. In that case, bnxt_open_nic() needs to check if the ABORT_ERR flag is set and abort if it is. The configuration change that resulted in the bnxt_open_nic() call will fail but the NIC will be brought to a consistent IF_DOWN state. Without this patch, if bnxt_open_nic() were to continue in this error state, it may crash like this: [ 1648.659736] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1648.659768] IP: [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.659796] PGD 101e1b3067 PUD 101e1b2067 PMD 0 [ 1648.659813] Oops: 0000 [#1] SMP [ 1648.659825] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc dell_smbios dell_wmi_descriptor dcdbas amd64_edac_mod edac_mce_amd kvm_amd kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper vfat cryptd fat pcspkr ipmi_ssif sg k10temp i2c_piix4 wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_power_meter sch_fq_codel ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm ahci drm libahci megaraid_sas crct10dif_pclmul crct10dif_common [ 1648.660063] tg3 libata crc32c_intel bnxt_en(OE) drm_panel_orientation_quirks devlink ptp pps_core dm_mirror dm_region_hash dm_log dm_mod fuse [ 1648.660105] CPU: 13 PID: 3867 Comm: ethtool Kdump: loaded Tainted: G OE ------------ 3.10.0-1152.el7.x86_64 #1 [ 1648.660911] Hardware name: Dell Inc. PowerEdge R7515/0R4CNN, BIOS 1.2.14 01/28/2020 [ 1648.661662] task: ffff94e64cbc9080 ti: ffff94f55df1c000 task.ti: ffff94f55df1c000 [ 1648.662409] RIP: 0010:[<ffffffffc01e9b3a>] [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.663171] RSP: 0018:ffff94f55df1fba8 EFLAGS: 00010202 [ 1648.663927] RAX: 0000000000000000 RBX: ffff94e6827e0000 RCX: 0000000000000000 [ 1648.664684] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94e6827e08c0 [ 1648.665433] RBP: ffff94f55df1fc20 R08: 00000000000001ff R09: 0000000000000008 [ 1648.666184] R10: 0000000000000d53 R11: ffff94f55df1f7ce R12: ffff94e6827e08c0 [ 1648.666940] R13: ffff94e6827e08c0 R14: ffff94e6827e08c0 R15: ffffffffb9115e40 [ 1648.667695] FS: 00007f8aadba5740(0000) GS:ffff94f57eb40000(0000) knlGS:0000000000000000 [ 1648.668447] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1648.669202] CR2: 0000000000000000 CR3: 0000001022772000 CR4: 0000000000340fe0 [ 1648.669966] Call Trace: [ 1648.670730] [<ffffffffc01f1d5d>] ? bnxt_need_reserve_rings+0x9d/0x170 [bnxt_en] [ 1648.671496] [<ffffffffc01fa7ea>] __bnxt_open_nic+0x8a/0x9a0 [bnxt_en] [ 1648.672263] [<ffffffffc01f7479>] ? bnxt_close_nic+0x59/0x1b0 [bnxt_en] [ 1648.673031] [<ffffffffc01fb11b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 1648.673793] [<ffffffffc020037c>] bnxt_set_ringparam+0x6c/0xa0 [bnxt_en] [ 1648.674550] [<ffffffffb8a5f564>] dev_ethtool+0x1334/0x21a0 [ 1648.675306] [<ffffffffb8a719ff>] dev_ioctl+0x1ef/0x5f0 [ 1648.676061] [<ffffffffb8a324bd>] sock_do_ioctl+0x4d/0x60 [ 1648.676810] [<ffffffffb8a326bb>] sock_ioctl+0x1eb/0x2d0 [ 1648.677548] [<ffffffffb8663230>] do_vfs_ioctl+0x3a0/0x5b0 [ 1648.678282] [<ffffffffb8b8e678>] ? __do_page_fault+0x238/0x500 [ 1648.679016] [<ffffffffb86634e1>] SyS_ioctl+0xa1/0xc0 [ 1648.679745] [<ffffffffb8b93f92>] system_call_fastpath+0x25/0x2a [ 1648.680461] Code: 9e 60 01 00 00 0f 1f 40 00 45 8b 8e 48 01 00 00 31 c9 45 85 c9 0f 8e 73 01 00 00 66 0f 1f 44 00 00 49 8b 86 a8 00 00 00 48 63 d1 <48> 8b 14 d0 48 85 d2 0f 84 46 01 00 00 41 8b 86 44 01 00 00 c7 [ 1648.681986] RIP [<ffffffffc01e9b3a>] bnxt_alloc_mem+0x50a/0x1140 [bnxt_en] [ 1648.682724] RSP <ffff94f55df1fba8> [ 1648.683451] CR2: 0000000000000000 Fixes: ec5d31e3 ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
When a PCIe fatal error occurs, the internal latched BAR addresses in the chip get reset even though the BAR register values in config space are retained. pci_restore_state() will not rewrite the BAR addresses if the BAR address values are valid, causing the chip's internal BAR addresses to stay invalid. So we need to zero the BAR registers during PCIe fatal error to force pci_restore_state() to restore the BAR addresses. These write cycles to the BAR registers will cause the proper BAR addresses to latch internally. Fixes: 6316ea6d ("bnxt_en: Enable AER support.") Signed-off-by:
-
Vasundhara Volam authored
As part of the commit b148bb23 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task()."), cancel_delayed_work_sync() is called only for VFs to fix a possible crash by cancelling any pending delayed work items. It was assumed by mistake that the flush_workqueue() call on the PF would flush delayed work items as well. As flush_workqueue() does not cancel the delayed workqueue, extend the fix for PFs. This fix will avoid the system crash, if there are any pending delayed work items in fw_reset_task() during driver's .remove() call. Unify the workqueue cleanup logic for both PF and VF by calling cancel_work_sync() and cancel_delayed_work_sync() directly in bnxt_remove_one(). Fixes: b148bb23 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().") Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
A recent patch has moved the workqueue cleanup logic before calling unregister_netdev() in bnxt_remove_one(). This caused a regression because the workqueue can be restarted if the device is still open. Workqueue cleanup must be done after unregister_netdev(). The workqueue will not restart itself after the device is closed. Call bnxt_cancel_sp_work() after unregister_netdev() and call bnxt_dl_fw_reporters_destroy() after that. This fixes the regession and the original NULL ptr dereference issue. Fixes: b16939b5 ("bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()") Signed-off-by:
-
- 26 Oct, 2020 11 commits
-
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Various fixes This patch set contains various fixes for mlxsw. Patch #1 ensures that only link modes that are supported by both the device and the driver are advertised. When a link mode that is not supported by the driver is negotiated by the device, it will be presented as an unknown speed by ethtool, causing the bond driver to wrongly assume that the link is down. Patch #2 fixes a trivial memory leak upon module removal. Patch #3 fixes a use-after-free that syzkaller was able to trigger once on a slow emulator after a few months of fuzzing. ==================== Link: https://lore.kernel.org/r/20201024133733.2107509-1-idosch@idosch.orgSigned-off-by:
-
Amit Cohen authored
Each EMAD transaction stores the skb used to issue the EMAD request ('trans->tx_skb') so that the request could be retried in case of a timeout. The skb can be freed when a corresponding response is received or as part of the retry logic (e.g., failed retransmit, exceeded maximum number of retries). The two tasks (i.e., response processing and retransmits) are synchronized by the atomic 'trans->active' field which ensures that responses to inactive transactions are ignored. In case of a failed retransmit the transaction is finished and all of its resources are freed. However, the current code does not mark it as inactive. Syzkaller was able to hit a race condition in which a concurrent response is processed while the transaction's resources are being freed, resulting in a use-after-free [1]. Fix the issue by making sure to mark the transaction as inactive after a failed retransmit and free its resources only if a concurrent task did not already do that. [1] BUG: KASAN: use-after-free in consume_skb+0x30/0x370 net/core/skbuff.c:833 Read of size 4 at addr ffff88804f570494 by task syz-executor.0/1004 CPU: 0 PID: 1004 Comm: syz-executor.0 Not tainted 5.8.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 instrument_atomic_read include/linux/instrumented.h:56 [inline] atomic_read include/asm-generic/atomic-instrumented.h:27 [inline] refcount_read include/linux/refcount.h:147 [inline] skb_unref include/linux/skbuff.h:1044 [inline] consume_skb+0x30/0x370 net/core/skbuff.c:833 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_process_response drivers/net/ethernet/mellanox/mlxsw/core.c:651 [inline] mlxsw_emad_rx_listener_func+0x5c9/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:672 mlxsw_core_skb_receive+0x4df/0x770 drivers/net/ethernet/mellanox/mlxsw/core.c:2063 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 Allocated by task 1006: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 slab_post_alloc_hook mm/slab.h:586 [inline] slab_alloc_node mm/slub.c:2824 [inline] slab_alloc mm/slub.c:2832 [inline] kmem_cache_alloc+0xcd/0x2e0 mm/slub.c:2837 __build_skb+0x21/0x60 net/core/skbuff.c:311 __netdev_alloc_skb+0x1e2/0x360 net/core/skbuff.c:464 netdev_alloc_skb include/linux/skbuff.h:2810 [inline] mlxsw_emad_alloc drivers/net/ethernet/mellanox/mlxsw/core.c:756 [inline] mlxsw_emad_reg_access drivers/net/ethernet/mellanox/mlxsw/core.c:787 [inline] mlxsw_core_reg_access_emad+0x1ab/0x1420 drivers/net/ethernet/mellanox/mlxsw/core.c:1817 mlxsw_reg_trans_query+0x39/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:1831 mlxsw_sp_sb_pm_occ_clear drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:260 [inline] mlxsw_sp_sb_occ_max_clear+0xbff/0x10a0 drivers/net/ethernet/mellanox/mlxsw/spectrum_buffers.c:1365 mlxsw_devlink_sb_occ_max_clear+0x76/0xb0 drivers/net/ethernet/mellanox/mlxsw/core.c:1037 devlink_nl_cmd_sb_occ_max_clear_doit+0x1ec/0x280 net/core/devlink.c:1765 genl_family_rcv_msg_doit net/netlink/genetlink.c:669 [inline] genl_family_rcv_msg net/netlink/genetlink.c:714 [inline] genl_rcv_msg+0x617/0x980 net/netlink/genetlink.c:731 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2470 genl_rcv+0x24/0x40 net/netlink/genetlink.c:742 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0x150/0x190 net/socket.c:671 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2359 ___sys_sendmsg+0xff/0x170 net/socket.c:2413 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2446 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 73: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kmem_cache_free+0xbe/0x380 mm/slub.c:3088 kfree_skbmem net/core/skbuff.c:622 [inline] kfree_skbmem+0xef/0x1b0 net/core/skbuff.c:616 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:837 [inline] consume_skb+0xe1/0x370 net/core/skbuff.c:831 mlxsw_emad_trans_finish+0x64/0x1c0 drivers/net/ethernet/mellanox/mlxsw/core.c:592 mlxsw_emad_transmit_retry.isra.0+0x9d/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:613 mlxsw_emad_trans_timeout_work+0x43/0x50 drivers/net/ethernet/mellanox/mlxsw/core.c:625 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88804f5703c0 which belongs to the cache skbuff_head_cache of size 224 The buggy address is located 212 bytes inside of 224-byte region [ffff88804f5703c0, ffff88804f5704a0) The buggy address belongs to the page: page:ffffea00013d5c00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x100000000000200(slab) raw: 0100000000000200 dead000000000100 dead000000000122 ffff88806c625400 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88804f570380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ffff88804f570400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88804f570480: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88804f570500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88804f570580: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc Fixes: caf7297e ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by:Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
Free the devlink instance during the teardown sequence in the non-reload case to avoid the following memory leak. unreferenced object 0xffff888232895000 (size 2048): comm "modprobe", pid 1073, jiffies 4295568857 (age 164.871s) hex dump (first 32 bytes): 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de ........"....... 10 50 89 32 82 88 ff ff 10 50 89 32 82 88 ff ff .P.2.....P.2.... backtrace: [<00000000c704e9a6>] __kmalloc+0x13a/0x2a0 [<00000000ee30129d>] devlink_alloc+0xff/0x760 [<0000000092ab3e5d>] 0xffffffffa042e5b0 [<000000004f3f8a31>] 0xffffffffa042f6ad [<0000000092800b4b>] 0xffffffffa0491df3 [<00000000c4843903>] local_pci_probe+0xcb/0x170 [<000000006993ded7>] pci_device_probe+0x2c2/0x4e0 [<00000000a8e0de75>] really_probe+0x2c5/0xf90 [<00000000d42ba75d>] driver_probe_device+0x1eb/0x340 [<00000000bcc95e05>] device_driver_attach+0x294/0x300 [<000000000e2bc177>] __driver_attach+0x167/0x2f0 [<000000007d44cd6e>] bus_for_each_dev+0x148/0x1f0 [<000000003cd5a91e>] driver_attach+0x45/0x60 [<000000000041ce51>] bus_add_driver+0x3b8/0x720 [<00000000f5215476>] driver_register+0x230/0x4e0 [<00000000d79356f5>] __pci_register_driver+0x190/0x200 Fixes: a22712a9 ("mlxsw: core: Fix devlink unregister flow") Signed-off-by:Vadim Pasternak <vadimp@nvidia.com> Tested-by:
Oleksandr Shamray <oleksandrs@nvidia.com> Signed-off-by:
-
Amit Cohen authored
During port creation the driver instructs the device to advertise all the supported link modes queried from the device. Since cited commit not all the link modes supported by the device are supported by the driver. This can result in the device negotiating a link mode that is not recognized by the driver causing ethtool to show an unsupported speed: $ ethtool swp1 ... Speed: Unknown! This is especially problematic when the netdev is enslaved to a bond, as the bond driver uses unknown speed as an indication that the link is down: [13048.900895] net_ratelimit: 86 callbacks suppressed [13048.900902] t_bond0: (slave swp52): failed to get link speed/duplex [13048.912160] t_bond0: (slave swp49): failed to get link speed/duplex Fix this by making sure that only link modes that are supported by both the device and the driver are advertised. Fixes: b97cd891 ("mlxsw: Remove 56G speed support") Signed-off-by:
-
Jakub Kicinski authored
Karsten Graul says: ==================== net/smc: fixes 2020-10-23 Patch 1 fixes a potential null pointer dereference. Patch 2 takes care of a suppressed return code and patch 3 corrects the system EID in the ISM driver. ==================== Link: https://lore.kernel.org/r/20201023184830.59548-1-kgraul@linux.ibm.comSigned-off-by:
-
Karsten Graul authored
The system EID that is defined by the ISM driver is not correct. Using an incorrect system EID allows to communicate with remote Linux systems that use the same incorrect system EID, but when it comes to interoperability with other operating systems then the system EIDs do never match which prevents SMC-Dv2 communication. Using the correct system EID fixes this problem. Fixes: 201091eb ("net/smc: introduce System Enterprise ID (SEID)") Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
The patch that repaired the invalid return code in smcd_new_buf_create() missed to take care of errno ENOSPC which has a special meaning that no more DMBEs can be registered on the device. Fix that by keeping this errno value during the translation of the return code. Fixes: 6b1bbf94 ("net/smc: fix invalid return code in smcd_new_buf_create()") Signed-off-by:
-
Karsten Graul authored
smc_listen_work() calls smc_listen_decline() on label out_decl, providing the ini pointer variable. But this pointer can still be null when the label out_decl is reached. Fix this by checking the ini variable in smc_listen_work() and call smc_listen_decline() with the result directly. Fixes: a7c9c5f4 ("net/smc: CLC accept / confirm V2") Signed-off-by:
-
Jeff Vander Stoep authored
During __vsock_create() CAP_NET_ADMIN is used to determine if the vsock_sock->trusted should be set to true. This value is used later for determing if a remote connection should be allowed to connect to a restricted VM. Unfortunately, if the caller doesn't have CAP_NET_ADMIN, an audit message such as an selinux denial is generated even if the caller does not want a trusted socket. Logging errors on success is confusing. To avoid this, switch the capable(CAP_NET_ADMIN) check to the noaudit version. Reported-by:
Roman Kiryanov <rkir@google.com> https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/Signed-off-by:
Jeff Vander Stoep <jeffv@google.com> Reviewed-by:
James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.comSigned-off-by:
-
Raju Rangoju authored
The current code sets up the filter action field before rewrites are set up. When the action 'switch' is used with rewrites, this may result in initial few packets that get switched out don't have rewrites applied on them. So, make sure filter action is set up along with rewrites or only after everything else is set up for rewrites. Fixes: 12b276fb ("cxgb4: add support to create hash filters") Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Link: https://lore.kernel.org/r/20201023115852.18262-1-rajur@chelsio.comSigned-off-by:
-
Dan Carpenter authored
Smatch complains that "ret" might be uninitialized if we don't enter the loop. We do always enter the loop so it's a false positive, but it's cleaner to just return a literal zero and that silences the warning as well. Signed-off-by:
-
- 24 Oct, 2020 8 commits
-
-
Arjun Roy authored
With SO_RCVLOWAT, under memory pressure, it is possible to enter a state where: 1. We have not received enough bytes to satisfy SO_RCVLOWAT. 2. We have not entered buffer pressure (see tcp_rmem_pressure()). 3. But, we do not have enough buffer space to accept more packets. In this case, we advertise 0 rwnd (due to #3) but the application does not drain the receive queue (no wakeup because of #1 and #2) so the flow stalls. Modify the heuristic for SO_RCVLOWAT so that, if we are advertising rwnd<=rcv_mss, force a wakeup to prevent a stall. Without this patch, setting tcp_rmem to 6143 and disabling TCP autotune causes a stalled flow. With this patch, no stall occurs. This is with RPC-style traffic with large messages. Fixes: 03f45c88 ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by:
Arjun Roy <arjunroy@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201023184709.217614-1-arjunroy.kdev@gmail.comSigned-off-by:
-
Michael Ellerman authored
Clang warns about the extra parentheses in this comparison: drivers/net/ethernet/freescale/ucc_geth.c:1361:28: warning: equality comparison with extraneous parentheses if ((ugeth->phy_interface == PHY_INTERFACE_MODE_SGMII)) ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~ It seems clear the intent here is to do a comparison not an assignment, so drop the extra parentheses to avoid any confusion. Signed-off-by:Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20201023033236.3296988-1-mpe@ellerman.id.auSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: memory usage fixes This patchset addresses some memory leaks and incorrect io reads. ==================== Link: https://lore.kernel.org/r/20201022235531.65956-1-snelson@pensando.ioSigned-off-by:
-
Shannon Nelson authored
The sentinel descriptor entry was getting missed in the traverse of the ring from head to tail, so change to a loop of 0 to the end. Fixes: f1d2e894 ("ionic: use index not pointer for queue tracking") Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Kmemleak pointed out to us that ionic_rx_flush() is sending skbs into napi_gro_XXX with a disabled napi context, and these end up getting lost and leaked. We can safely remove the flush. Fixes: 0f3154e6 ("ionic: Add Tx and Rx handling") Signed-off-by:
-
Shannon Nelson authored
The sparse complaints around the static_asserts were obscuring more useful complaints. So, don't check the static_asserts, and fix the remaining sparse complaints. Signed-off-by:
-
Vinay Kumar Yadav authored
chtls_pt_recvmsg() receives a skb with tls header and subsequent skb with data, need to finalize the data copy whenever next skb with tls header is available. but here current tls header is overwritten by next available tls header, ends up corrupting user buffer data. fixing it by finalizing current record whenever next skb contains tls header. v1->v2: - Improved commit message. Fixes: 17a7d24a ("crypto: chtls - generic handling of data and hdr") Signed-off-by:
-
Alex Elder authored
IPA transactions describe actions to be performed by the IPA hardware. Three cases use IPA transactions: transmitting a socket buffer; providing a page to receive packet data; and issuing an IPA immediate command. An IPA transaction contains a scatter/gather list (SGL) to hold the set of actions to be performed. We map buffers in the SGL for DMA at the time they are added to the transaction. For skb TX transactions, we fill the SGL with a call to skb_to_sgvec(). Page RX transactions involve a single page pointer, and that is recorded in the SGL with sg_set_page(). In both of these cases we then map the SGL for DMA with a call to dma_map_sg(). Immediate commands are different. The payload for an immediate command comes from a region of coherent DMA memory, which must *not* be mapped for DMA. For that reason, gsi_trans_cmd_add() sort of hand-crafts each SGL entry added to a command transaction. This patch fixes a problem with the code that crafts the SGL entry for an immediate command. Previously a portion of the SGL entry was updated using sg_set_buf(). However this is not valid because it includes a call to virt_to_page() on the buffer, but the command buffer pointer is not a linear address. Since we never actually map the SGL for command transactions, there are very few fields in the SGL we need to fill. Specifically, we only need to record the DMA address and the length, so they can be used by __gsi_trans_commit() to fill a TRE. We additionally need to preserve the SGL flags so for_each_sg() still works. For that we can simply assign a null page pointer for command SGL entries. Fixes: 9dd441e4 ("soc: qcom: ipa: GSI transactions") Reported-by:
Stephen Boyd <swboyd@chromium.org> Tested-by:
Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20201022010029.11877-1-elder@linaro.orgSigned-off-by:
-
- 23 Oct, 2020 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Cross-tree/merge window issues: - rtl8150: don't incorrectly assign random MAC addresses; fix late in the 5.9 cycle started depending on a return code from a function which changed with the 5.10 PR from the usb subsystem Current release regressions: - Revert "virtio-net: ethtool configurable RXCSUM", it was causing crashes at probe when control vq was not negotiated/available Previous release regressions: - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO bus, only first device would be probed correctly - nexthop: Fix performance regression in nexthop deletion by effectively switching from recently added synchronize_rcu() to synchronize_rcu_expedited() - netsec: ignore 'phy-mode' device property on ACPI systems; the property is not populated correctly by the firmware, but firmware configures the PHY so just keep boot settings Previous releases - always broken: - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing bulk transfers getting "stuck" - icmp: randomize the global rate limiter to prevent attackers from getting useful signal - r8169: fix operation under forced interrupt threading, make the driver always use hard irqs, even on RT, given the handler is light and only wants to schedule napi (and do so through a _irqoff() variant, preferably) - bpf: Enforce pointer id generation for all may-be-null register type to avoid pointers erroneously getting marked as null-checked - tipc: re-configure queue limit for broadcast link - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels - fix various issues in chelsio inline tls driver Misc: - bpf: improve just-added bpf_redirect_neigh() helper api to support supplying nexthop by the caller - in case BPF program has already done a lookup we can avoid doing another one - remove unnecessary break statements - make MCTCP not select IPV6, but rather depend on it" * tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) tcp: fix to update snd_wl1 in bulk receiver fast path net: Properly typecast int values to set sk_max_pacing_rate netfilter: nf_fwd_netdev: clear timestamp in forwarding path ibmvnic: save changed mac address to adapter->mac_addr selftests: mptcp: depends on built-in IPv6 Revert "virtio-net: ethtool configurable RXCSUM" rtnetlink: fix data overflow in rtnl_calcit() net: ethernet: mtk-star-emac: select REGMAP_MMIO net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh() bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop mptcp: depends on IPV6 but not as a module sfc: move initialisation of efx->filter_sem to efx_init_struct() mpls: load mpls_gso after mpls_iptunnel net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action() net: dsa: bcm_sf2: make const array static, makes object smaller mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it ... -
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Andreas Gruenbacher: - Use iomap for non-journaled buffered I/O. This largely eliminates buffer heads on filesystems where the block size matches the page size. Many thanks to Christoph Hellwig for this patch! - Fixes for some more journaled data filesystem bugs, found by running xfstests with data journaling on for all files (chattr +j $MNT) (Bob Peterson) - gfs2_evict_inode refactoring (Bob Peterson) - Use the statfs data in the journal during recovery instead of reading it in from the local statfs inodes (Abhi Das) - Several other minor fixes by various people * tag 'gfs2-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (30 commits) gfs2: Recover statfs info in journal head gfs2: lookup local statfs inodes prior to journal recovery gfs2: Add fields for statfs info in struct gfs2_log_header_host gfs2: Ignore subsequent errors after withdraw in rgrp_go_sync gfs2: Eliminate gl_vm gfs2: Only access gl_delete for iopen glocks gfs2: Fix comments to glock_hash_walk gfs2: eliminate GLF_QUEUED flag in favor of list_empty(gl_holders) gfs2: Ignore journal log writes for jdata holes gfs2: simplify gfs2_block_map gfs2: Only set PageChecked if we have a transaction gfs2: don't lock sd_ail_lock in gfs2_releasepage gfs2: make gfs2_ail1_empty_one return the count of active items gfs2: Wipe jdata and ail1 in gfs2_journal_wipe, formerly gfs2_meta_wipe gfs2: enhance log_blocks trace point to show log blocks free gfs2: add missing log_blocks trace points in gfs2_write_revokes gfs2: rename gfs2_write_full_page to gfs2_write_jdata_page, remove parm gfs2: add validation checks for size of superblock gfs2: use-after-free in sysfs deregistration gfs2: Fix NULL pointer dereference in gfs2_rgrp_dump ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs updates from Steve French: - add support for recognizing special file types (char/block/fifo/ symlink) for files created by Linux on WSL (a format we plan to move to as the default for creating special files on Linux, as it has advantages over the other current option, the SFU format) in readdir. - fix double queries to root directory when directory leases not supported (e.g. Samba) - fix querying mode bits (modefromsid mount option) for special file types - stronger encryption (gcm256), disabled by default until tested more broadly - allow querying owner when server reports 'well known SID' on query dir with SMB3.1.1 POSIX extensions * tag '5.10-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (30 commits) SMB3: add support for recognizing WSL reparse tags cifs: remove bogus debug code smb3.1.1: fix typo in compression flag cifs: move smb version mount options into fs_context.c cifs: move cache mount options to fs_context.ch cifs: move security mount options into fs_context.ch cifs: add files to host new mount api smb3: do not try to cache root directory if dir leases not supported smb3: fix stat when special device file and mounted with modefromsid cifs: Print the address and port we are connecting to in generic_ip_connect() SMB3: Resolve data corruption of TCP server info fields cifs: make const array static, makes object smaller SMB3.1.1: Fix ids returned in POSIX query dir smb3: add dynamic trace point to trace when credits obtained smb3.1.1: do not fail if no encryption required but server doesn't support it cifs: Return the error from crypt_message when enc/dec key not found. smb3.1.1: set gcm256 when requested smb3.1.1: rename nonces used for GCM and CCM encryption smb3.1.1: print warning if server does not support requested encryption type smb3.1.1: add new module load parm enable_gcm_256 ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull clone/dedupe/remap code refactoring from Darrick Wong: "Move the generic file range remap (aka reflink and dedupe) functions out of mm/filemap.c and fs/read_write.c and into fs/remap_range.c to reduce clutter in the first two files" * tag 'vfs-5.10-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: vfs: move the generic write and copy checks out of mm vfs: move the remap range helpers to remap_range.c vfs: move generic_remap_checks out of mm
-
