- 09 Nov, 2015 16 commits
-
-
Alexandre Belloni authored
commit b94e2280 upstream. 0° Kelvin is actually −273.15°C, not -272.15°C. Fix the temperature offset. Also improve the comment explaining the calculation. Reported-by:
Janusz Użycki <j.uzycki@elpromaelectronics.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Marek Vasut <marex@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Deucher authored
commit 49abb266 upstream. Fixes a harmless error message caused by: 51a4726bSigned-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ville Syrjälä authored
commit 8e7a65aa upstream. We accidentally lost the initial DPLL register write in 1c4e0274 drm/i915: Fix DVO 2x clock enable on 830M The "three times for luck" hack probably saved us from a total disaster. But anyway, bring the initial write back so that the code actually makes some sense. Reported-and-tested-by:
Nick Bowler <nbowler@draconx.ca> References: http://mid.gmane.org/CAN_QmVyMaArxYgEcVVsGvsMo7-6ohZr8HmF5VhkkL4i9KOmrhw@mail.gmail.com Cc: Nick Bowler <nbowler@draconx.ca> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ilia Mirkin authored
commit 2a6c521b upstream. On nv50+, we restrict the valid domains to just the one where the buffer was originally created. However after the buffer is evicted to system memory, we might move it back to a different domain that was not originally valid. When sharing the buffer and retrieving its GEM_INFO data, we still want the domain that will be valid for this buffer in a pushbuf, not the one where it currently happens to be. This resolves fdo#92504 and several others. These are due to suspend evicting all buffers, making it more likely that they temporarily end up in the wrong place. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
SeongJae Park authored
commit e1bde3b1 upstream. Fix the pointer-integer size mismatch warning below: drivers/spi/spi-gpio.c: In function ‘spi_gpio_setup’: drivers/spi/spi-gpio.c:252:8: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cs = (unsigned int) spi->controller_data; ^ Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Lad, Prabhakar authored
commit 31f50e48 upstream. This patch fixes following build warning: In file included from include/linux/printk.h:261:0, from include/linux/kernel.h:13, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/power/bq24190_charger.c:11: drivers/power/bq24190_charger.c: In function ‘bq24190_irq_handler_thread’: include/linux/dynamic_debug.h:86:20: warning: ‘ss_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^ drivers/power/bq24190_charger.c:1211:5: note: ‘ss_reg’ was declared here u8 ss_reg, f_reg; ^ In file included from include/linux/printk.h:261:0, from include/linux/kernel.h:13, from include/linux/list.h:8, from include/linux/module.h:9, from drivers/power/bq24190_charger.c:11: include/linux/dynamic_debug.h:86:20: warning: ‘f_reg’ may be used uninitialized in this function [-Wmaybe-uninitialized] __dynamic_dev_dbg(&descriptor, dev, fmt, \ ^ drivers/power/bq24190_charger.c:1211:13: note: ‘f_reg’ was declared here u8 ss_reg, f_reg; Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
David S. Miller authored
commit 1d20a160 upstream. drivers/net/ethernet/sfc/selftest.c: In function ‘efx_iterate_state’: drivers/net/ethernet/sfc/selftest.c:388:9: warning: passing argument 1 of ‘memcpy’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-array-qualifiers] This is because the msg[] member of struct efx_loopback_payload is marked as 'const'. Remove that. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jan Kara authored
commit 296291cd upstream. Currently a simple program below issues a sendfile(2) system call which takes about 62 days to complete in my test KVM instance. int fd; off_t off = 0; fd = open("file", O_RDWR | O_TRUNC | O_SYNC | O_CREAT, 0644); ftruncate(fd, 2); lseek(fd, 0, SEEK_END); sendfile(fd, fd, &off, 0xfffffff); Now you should not ask kernel to do a stupid stuff like copying 256MB in 2-byte chunks and call fsync(2) after each chunk but if you do, sysadmin should have a way to stop you. We actually do have a check for fatal_signal_pending() in generic_perform_write() which triggers in this path however because we always succeed in writing something before the check is done, we return value > 0 from generic_perform_write() and thus the information about signal gets lost. Fix the problem by doing the signal check before writing anything. That way generic_perform_write() returns -EINTR, the error gets propagated up and the sendfile loop terminates early. Signed-off-by:
Jan Kara <jack@suse.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Charles Keepax authored
commit 97aff2c0 upstream. There are 24 EQ registers not 25, I suspect this bug came about because the registers start at EQ1 not zero. The bug is relatively harmless as the extra register written is an unused one. Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Vasant Hegde authored
commit 8832317f upstream. Currently we do not validate rtas.entry before calling enter_rtas(). This leads to a kernel oops when user space calls rtas system call on a powernv platform (see below). This patch adds code to validate rtas.entry before making enter_rtas() call. Oops: Exception in kernel mode, sig: 4 [#1] SMP NR_CPUS=1024 NUMA PowerNV task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000 NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140 REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le) MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000 CFAR: c000000000009c0c SOFTE: 0 NIP [0000000000000000] (null) LR [0000000000009c14] 0x9c14 Call Trace: [c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable) [c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0 [c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98 Fixes: 55190f88 ("powerpc: Add skeleton PowerNV platform") Reported-by:
NAGESWARA R. SASTRY <nasastry@in.ibm.com> Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Reword change log, trim oops, and add stable + fixes] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Joerg Roedel authored
commit cbf3ccd0 upstream. During device assignment/deassignment the flags in the DTE get lost, which might cause spurious faults, for example when the device tries to access the system management range. Fix this by not clearing the flags with the rest of the DTE. Reported-by:
G. Richard Bellamy <rbellamy@pteradigm.com> Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Luca Coelho authored
commit f08f6258 upstream. Add 3 new subdevice IDs for the 0x095A device ID and 2 for the 0x095B device ID. Reported-by:
Jeremy <jeremy.bomkamp@gmail.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 2cf5eb3a upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit b5a48134 upstream. The MODULE_FIRMWARE() for 3160 should be using the 7260 version as it's done in the device configuration struct instead of referencing IWL3160_UCODE_API_OK which doesn't even exist. Reported-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Johannes Berg authored
commit 5bd16687 upstream. The code to send the RX PN data (for each TID) to the firmware has a devastating bug: it overwrites the data for TID 0 with all the TID data, leaving the remaining TIDs zeroed. This will allow replays to actually be accepted by the firmware, which could allow waking up the system. Signed-off-by:
-
Felix Fietkau authored
commit 029cd037 upstream. ath9k inserts padding between the 802.11 header and the data area (to align it). Since it didn't declare this extra required headroom, this led to some nasty issues like randomly dropped packets in some setups. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
- 27 Oct, 2015 24 commits
-
-
Greg Kroah-Hartman authored
-
Konstantin Khlebnikov authored
commit fe32d3cd upstream. These functions check should_resched() before unlocking spinlock/bh-enable: preempt_count always non-zero => should_resched() always returns false. cond_resched_lock() worked iff spin_needbreak is set. This patch adds argument "preempt_offset" to should_resched(). preempt_count offset constants for that: PREEMPT_DISABLE_OFFSET - offset after preempt_disable() PREEMPT_LOCK_OFFSET - offset after spin_lock() SOFTIRQ_DISABLE_OFFSET - offset after local_bh_distable() SOFTIRQ_LOCK_OFFSET - offset after spin_lock_bh() Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Graf <agraf@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: bdb43806 ("sched: Extract the basic add/sub preempt_count modifiers") Link: http://lkml.kernel.org/r/20150715095204.12246.98268.stgit@buzzSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
-
Frederic Weisbecker authored
commit 90b62b51 upstream. "CHECK" suggests it's only used as a comparison mask. But now it's used further as a config-conditional preempt disabler offset. Lets disambiguate this name. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit 3ebe138a upstream. If rbd_dev_image_probe() in rbd_dev_probe_parent() fails, header_name is freed twice: once in rbd_dev_probe_parent() and then in its caller rbd_dev_image_probe() (rbd_dev_image_probe() is called recursively to handle parent images). rbd_dev_probe_parent() is responsible for probing the parent, so it shouldn't muck with clone's fields. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Mike Snitzer authored
commit ba30670f upstream. Fixes: ac8c3f3d ("dm thin: generate event when metadata threshold passed") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 51a4726b upstream. They were added relatively early in the driver init process which meant that in some cases the driver was not finished initializing before external tools tried to use them which could result in a crash depending on the timing. Signed-off-by:
-
Ben Skeggs authored
commit f231976c upstream. We need to do this in order to prevent accesses to the device while it's powered down. Userspace may have an mmap of the fb, and there's no good way (that I know of) to prevent it from touching the device otherwise. This fixes some nasty races between runpm and plymouth on some systems, which result in the GPU getting very upset and hanging the boot. Signed-off-by:
-
Shaohua Li authored
commit 874bbfe6 upstream. My system keeps crashing with below message. vmstat_update() schedules a delayed work in current cpu and expects the work runs in the cpu. schedule_delayed_work() is expected to make delayed work run in local cpu. The problem is timer can be migrated with NO_HZ. __queue_work() queues work in timer handler, which could run in a different cpu other than where the delayed work is scheduled. The end result is the delayed work runs in different cpu. The patch makes __queue_delayed_work records local cpu earlier. Where the timer runs doesn't change where the work runs with the change. [ 28.010131] ------------[ cut here ]------------ [ 28.010609] kernel BUG at ../mm/vmstat.c:1392! [ 28.011099] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN [ 28.011860] Modules linked in: [ 28.012245] CPU: 0 PID: 289 Comm: kworker/0:3 Tainted: G W4.3.0-rc3+ #634 [ 28.013065] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153802- 04/01/2014 [ 28.014160] Workqueue: events vmstat_update [ 28.014571] task: ffff880117682580 ti: ffff8800ba428000 task.ti: ffff8800ba428000 [ 28.015445] RIP: 0010:[<ffffffff8115f921>] [<ffffffff8115f921>]vmstat_update+0x31/0x80 [ 28.016282] RSP: 0018:ffff8800ba42fd80 EFLAGS: 00010297 [ 28.016812] RAX: 0000000000000000 RBX: ffff88011a858dc0 RCX:0000000000000000 [ 28.017585] RDX: ffff880117682580 RSI: ffffffff81f14d8c RDI:ffffffff81f4df8d [ 28.018366] RBP: ffff8800ba42fd90 R08: 0000000000000001 R09:0000000000000000 [ 28.019169] R10: 0000000000000000 R11: 0000000000000121 R12:ffff8800baa9f640 [ 28.019947] R13: ffff88011a81e340 R14: ffff88011a823700 R15:0000000000000000 [ 28.020071] FS: 0000000000000000(0000) GS:ffff88011a800000(0000)knlGS:0000000000000000 [ 28.020071] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 28.020071] CR2: 00007ff6144b01d0 CR3: 00000000b8e93000 CR4:00000000000006f0 [ 28.020071] Stack: [ 28.020071] ffff88011a858dc0 ffff8800baa9f640 ffff8800ba42fe00ffffffff8106bd88 [ 28.020071] ffffffff8106bd0b 0000000000000096 0000000000000000ffffffff82f9b1e8 [ 28.020071] ffffffff829f0b10 0000000000000000 ffffffff81f18460ffff88011a81e340 [ 28.020071] Call Trace: [ 28.020071] [<ffffffff8106bd88>] process_one_work+0x1c8/0x540 [ 28.020071] [<ffffffff8106bd0b>] ? process_one_work+0x14b/0x540 [ 28.020071] [<ffffffff8106c214>] worker_thread+0x114/0x460 [ 28.020071] [<ffffffff8106c100>] ? process_one_work+0x540/0x540 [ 28.020071] [<ffffffff81071bf8>] kthread+0xf8/0x110 [ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200 [ 28.020071] [<ffffffff81a6522f>] ret_from_fork+0x3f/0x70 [ 28.020071] [<ffffffff81071b00>] ?kthread_create_on_node+0x200/0x200 Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Mika Westerberg authored
commit 56d4b8a2 upstream. ACPI SSCN/FMCN methods were originally added because then the platform can provide the most accurate HCNT/LCNT values to the driver. However, this seems not to be true for Dell Inspiron 7348 where using these causes the touchpad to fail in boot: i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration i2c_hid i2c-DLL0675:00: failed to retrieve report from device. i2c_designware INT3433:00: controller timed out The values received from ACPI are (in fast mode): HCNT: 72 LCNT: 160 this translates to following timings (input clock is 100MHz on Broadwell): tHIGH: 720 ns (spec min 600 ns) tLOW: 1600 ns (spec min 1300 ns) Bus period: 2920 ns (assuming 300 ns tf and tr) Bus speed: 342.5 kHz Both tHIGH and tLOW are within the I2C specification. The calculated values when ACPI parameters are not used are (in fast mode): HCNT: 87 LCNT: 159 which translates to: tHIGH: 870 ns (spec min 600 ns) tLOW: 1590 ns (spec min 1300 ns) Bus period 3060 ns (assuming 300 ns tf and tr) Bus speed 326.8 kHz These values are also within the I2C specification. Since both ACPI and calculated values meet the I2C specification timing requirements it is hard to say why the touchpad does not function properly with the ACPI values except that the bus speed is higher in this case (but still well below the max 400kHz). Solve this by adding DMI quirk to the driver that disables using ACPI parameters on this particulare machine. Reported-by:
Pavel Roskin <plroskin@gmail.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Wolfram Sang authored
commit eadd709f upstream. The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by:
Kukjin Kim <kgene@kernel.org> Signed-off-by:
-
Wolfram Sang authored
commit 4f7effdd upstream. The core may register clients attached to this master which may use funtionality from the master. So, RuntimePM must be enabled before, otherwise this will fail. While here, move drvdata, too. Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Will Deacon authored
commit b6dd8e07 upstream. Commit df057cc7 ("arm64: errata: add module build workaround for erratum #843419") sets CFLAGS_MODULE to ensure that the large memory model is used by the compiler when building kernel modules. However, CFLAGS_MODULE is an environment variable and intended to be overridden on the command line, which appears to be the case with the Ubuntu kernel packaging system, so use KBUILD_CFLAGS_MODULE instead. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Fixes: df057cc7 ("arm64: errata: add module build workaround for erratum #843419") Reported-by:
Dann Frazier <dann.frazier@canonical.com> Tested-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Chris Mason authored
commit dc6c5fb3 upstream. The code for btrfs inode-resolve has never worked properly for files with enough hard links to trigger extrefs. It was trying to get the leaf out of a path after freeing the path: btrfs_release_path(path); leaf = path->nodes[0]; item_size = btrfs_item_size_nr(leaf, slot); The fix here is to use the extent buffer we cloned just a little higher up to avoid deadlocks caused by using the leaf in the path. Signed-off-by:
Chris Mason <clm@fb.com> cc: Mark Fasheh <mfasheh@suse.de> Reviewed-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
Russell King authored
commit 8996eafd upstream. Unlike shash algorithms, ahash drivers must implement export and import as their descriptors may contain hardware state and cannot be exported as is. Unfortunately some ahash drivers did not provide them and end up causing crashes with algif_hash. This patch adds a check to prevent these drivers from registering ahash algorithms until they are fixed. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Dave Kleikamp authored
commit a66d7f72 upstream. Some of the crypto algorithms write to the initialization vector, but no space has been allocated for it. This clobbers adjacent memory. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 436c2a50 ] commit 3cc81d85 ("asix: Don't reset PHY on if_up for ASIX 88772") causes the ethernet on Arndale to no longer function. This appears to be because the Arndale ethernet requires a full reset before it will function correctly, however simply reverting the above patch causes problems with ethtool settings getting reset. It seems the problem is that the ethernet is not properly reset during bind, and indeed the code in ax88772_bind that resets the device is a very small subset of the actual ax88772_reset function. This patch uses ax88772_reset in place of the existing reset code in ax88772_bind which removes some code duplication and fixes the ethernet on Arndale. It is still possible that the original patch causes some issues with suspend and resume but that seems like a separate issue and I haven't had a chance to test that yet. Signed-off-by:
Riku Voipio <riku.voipio@linaro.org> Signed-off-by:
-
Michel Stam authored
[ Upstream commit 3cc81d85 ] I've noticed every time the interface is set to 'up,', the kernel reports that the link speed is set to 100 Mbps/Full Duplex, even when ethtool is used to set autonegotiation to 'off', half duplex, 10 Mbps. It can be tested by: ifconfig eth0 down ethtool -s eth0 autoneg off speed 10 duplex half ifconfig eth0 up Then checking 'dmesg' for the link speed. Signed-off-by:
Michel Stam <m.stam@fugro.nl> Signed-off-by:
-
Joe Perches authored
[ Upstream commit 077cb37f ] It seems that kernel memory can leak into userspace by a kmalloc, ethtool_get_strings, then copy_to_user sequence. Avoid this by using kcalloc to zero fill the copied buffer. Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit e6740165 ] Since commit 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release"), pppoe_release() calls dev_put(po->pppoe_dev) if sk is in the PPPOX_ZOMBIE state. But pppoe_flush_dev() can set sk->sk_state to PPPOX_ZOMBIE _and_ reset po->pppoe_dev to NULL. This leads to the following oops: [ 570.140800] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e0 [ 570.142931] IP: [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] PGD 3d119067 PUD 3dbc1067 PMD 0 [ 570.144601] Oops: 0000 [#1] SMP [ 570.144601] Modules linked in: l2tp_ppp l2tp_netlink l2tp_core ip6_udp_tunnel udp_tunnel pppoe pppox ppp_generic slhc loop crc32c_intel ghash_clmulni_intel jitterentropy_rng sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 ablk_helper cryptd lrw gf128mul glue_helper acpi_cpufreq evdev serio_raw processor button ext4 crc16 mbcache jbd2 virtio_net virtio_blk virtio_pci virtio_ring virtio [ 570.144601] CPU: 1 PID: 15738 Comm: ppp-apitest Not tainted 4.2.0 #1 [ 570.144601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 570.144601] task: ffff88003d30d600 ti: ffff880036b60000 task.ti: ffff880036b60000 [ 570.144601] RIP: 0010:[<ffffffffa018c701>] [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] RSP: 0018:ffff880036b63e08 EFLAGS: 00010202 [ 570.144601] RAX: 0000000000000000 RBX: ffff880034340000 RCX: 0000000000000206 [ 570.144601] RDX: 0000000000000006 RSI: ffff88003d30dd20 RDI: ffff88003d30dd20 [ 570.144601] RBP: ffff880036b63e28 R08: 0000000000000001 R09: 0000000000000000 [ 570.144601] R10: 00007ffee9b50420 R11: ffff880034340078 R12: ffff8800387ec780 [ 570.144601] R13: ffff8800387ec7b0 R14: ffff88003e222aa0 R15: ffff8800387ec7b0 [ 570.144601] FS: 00007f5672f48700(0000) GS:ffff88003fc80000(0000) knlGS:0000000000000000 [ 570.144601] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 570.144601] CR2: 00000000000004e0 CR3: 0000000037f7e000 CR4: 00000000000406a0 [ 570.144601] Stack: [ 570.144601] ffffffffa018f240 ffff8800387ec780 ffffffffa018f240 ffff8800387ec7b0 [ 570.144601] ffff880036b63e48 ffffffff812caabe ffff880039e4e000 0000000000000008 [ 570.144601] ffff880036b63e58 ffffffff812cabad ffff880036b63ea8 ffffffff811347f5 [ 570.144601] Call Trace: [ 570.144601] [<ffffffff812caabe>] sock_release+0x1a/0x75 [ 570.144601] [<ffffffff812cabad>] sock_close+0xd/0x11 [ 570.144601] [<ffffffff811347f5>] __fput+0xff/0x1a5 [ 570.144601] [<ffffffff811348cb>] ____fput+0x9/0xb [ 570.144601] [<ffffffff81056682>] task_work_run+0x66/0x90 [ 570.144601] [<ffffffff8100189e>] prepare_exit_to_usermode+0x8c/0xa7 [ 570.144601] [<ffffffff81001a26>] syscall_return_slowpath+0x16d/0x19b [ 570.144601] [<ffffffff813babb1>] int_ret_from_sys_call+0x25/0x9f [ 570.144601] Code: 48 8b 83 c8 01 00 00 a8 01 74 12 48 89 df e8 8b 27 14 e1 b8 f7 ff ff ff e9 b7 00 00 00 8a 43 12 a8 0b 74 1c 48 8b 83 a8 04 00 00 <48> 8b 80 e0 04 00 00 65 ff 08 48 c7 83 a8 04 00 00 00 00 00 00 [ 570.144601] RIP [<ffffffffa018c701>] pppoe_release+0x50/0x101 [pppoe] [ 570.144601] RSP <ffff880036b63e08> [ 570.144601] CR2: 00000000000004e0 [ 570.200518] ---[ end trace 46956baf17349563 ]--- pppoe_flush_dev() has no reason to override sk->sk_state with PPPOX_ZOMBIE. pppox_unbind_sock() already sets sk->sk_state to PPPOX_DEAD, which is the correct state given that sk is unbound and po->pppoe_dev is NULL. Fixes: 2b018d57 ("pppoe: drop PPPOX_ZOMBIEs in pppoe_release") Tested-by:
Oleksii Berezhniak <core@irc.lg.ua> Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c7c49b8f ] Greg reported crashes hitting the following check in __sk_backlog_rcv() BUG_ON(!sock_flag(sk, SOCK_MEMALLOC)); The pfmemalloc bit is currently checked in sk_filter(). This works correctly for TCP, because sk_filter() is ran in tcp_v[46]_rcv() before hitting the prequeue or backlog checks. For UDP or other protocols, this does not work, because the sk_filter() is ran from sock_queue_rcv_skb(), which might be called _after_ backlog queuing if socket is owned by user by the time packet is processed by softirq handler. Fixes: b4b9e355 ("netvm: set PF_MEMALLOC as appropriate during SKB processing") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Greg Thelen <gthelen@google.com> Signed-off-by:
-
Pravin B Shelar authored
[ Upstream commit 31b33dfb ] Earlier patch 6ae459bd tried to detect void ckecksum partial skb by comparing pull length to checksum offset. But it does not work for all cases since checksum-offset depends on updates to skb->data. Following patch fixes it by validating checksum start offset after skb-data pointer is updated. Negative value of checksum offset start means there is no need to checksum. Fixes: 6ae459bd ("skbuff: Fix skb checksum flag on skb pull") Reported-by:
Andrew Vagin <avagin@odin.com> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Pravin B Shelar authored
[ Upstream commit 6ae459bd ] VXLAN device can receive skb with checksum partial. But the checksum offset could be in outer header which is pulled on receive. This results in negative checksum offset for the skb. Such skb can cause the assert failure in skb_checksum_help(). Following patch fixes the bug by setting checksum-none while pulling outer header. Following is the kernel panic msg from old kernel hitting the bug. ------------[ cut here ]------------ kernel BUG at net/core/dev.c:1906! RIP: 0010:[<ffffffff81518034>] skb_checksum_help+0x144/0x150 Call Trace: <IRQ> [<ffffffffa0164c28>] queue_userspace_packet+0x408/0x470 [openvswitch] [<ffffffffa016614d>] ovs_dp_upcall+0x5d/0x60 [openvswitch] [<ffffffffa0166236>] ovs_dp_process_packet_with_key+0xe6/0x100 [openvswitch] [<ffffffffa016629b>] ovs_dp_process_received_packet+0x4b/0x80 [openvswitch] [<ffffffffa016c51a>] ovs_vport_receive+0x2a/0x30 [openvswitch] [<ffffffffa0171383>] vxlan_rcv+0x53/0x60 [openvswitch] [<ffffffffa01734cb>] vxlan_udp_encap_recv+0x8b/0xf0 [openvswitch] [<ffffffff8157addc>] udp_queue_rcv_skb+0x2dc/0x3b0 [<ffffffff8157b56f>] __udp4_lib_rcv+0x1cf/0x6c0 [<ffffffff8157ba7a>] udp_rcv+0x1a/0x20 [<ffffffff8154fdbd>] ip_local_deliver_finish+0xdd/0x280 [<ffffffff81550128>] ip_local_deliver+0x88/0x90 [<ffffffff8154fa7d>] ip_rcv_finish+0x10d/0x370 [<ffffffff81550365>] ip_rcv+0x235/0x300 [<ffffffff8151ba1d>] __netif_receive_skb+0x55d/0x620 [<ffffffff8151c360>] netif_receive_skb+0x80/0x90 [<ffffffff81459935>] virtnet_poll+0x555/0x6f0 [<ffffffff8151cd04>] net_rx_action+0x134/0x290 [<ffffffff810683d8>] __do_softirq+0xa8/0x210 [<ffffffff8162fe6c>] call_softirq+0x1c/0x30 [<ffffffff810161a5>] do_softirq+0x65/0xa0 [<ffffffff810687be>] irq_exit+0x8e/0xb0 [<ffffffff81630733>] do_IRQ+0x63/0xe0 [<ffffffff81625f2e>] common_interrupt+0x6e/0x6e Reported-by:
Anupam Chanda <achanda@vmware.com> Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
-
Andrey Vagin authored
[ Upstream commit e9193d60 ] Now send with MSG_PEEK can return data from multiple SKBs. Unfortunately we take into account the peek offset for each skb, that is wrong. We need to apply the peek offset only once. In addition, the peek offset should be used only if MSG_PEEK is set. Cc: "David S. Miller" <davem@davemloft.net> (maintainer:NETWORKING Cc: Eric Dumazet <edumazet@google.com> (commit_signer:1/14=7%) Cc: Aaron Conole <aconole@bytheb.org> Fixes: 9f389e35 ("af_unix: return data from multiple SKBs on recv() with MSG_PEEK flag") Signed-off-by:
Andrey Vagin <avagin@openvz.org> Tested-by:
Aaron Conole <aconole@bytheb.org> Signed-off-by:
-
Aaron Conole authored
[ Upstream commit 9f389e35 ] AF_UNIX sockets now return multiple skbs from recv() when MSG_PEEK flag is set. This is referenced in kernel bugzilla #12323 @ https://bugzilla.kernel.org/show_bug.cgi?id=12323 As described both in the BZ and lkml thread @ http://lkml.org/lkml/2008/1/8/444 calling recv() with MSG_PEEK on an AF_UNIX socket only reads a single skb, where the desired effect is to return as much skb data has been queued, until hitting the recv buffer size (whichever comes first). The modified MSG_PEEK path will now move to the next skb in the tree and jump to the again: label, rather than following the natural loop structure. This requires duplicating some of the loop head actions. This was tested using the python socketpair python code attached to the bugzilla issue. Signed-off-by:
-
