A deadlock is identified when there are three contexts running at the
same time:
- a HDMI jack work which is calling snd_soc_dapm_sync().
- user space is calling snd_pcm_release() to close pcm device.
- pm is calling runtime suspend function of HDMI codec driver.

By removing the clear_dapm_works() invocation in the
hdac_hdmi_runtime_suspend() function, the snd_pcm_release() could
always returns from dapm_power_widgets() function call without
blocking the hdac_hdmi_jack_dapm_work() work thread or being blocked
by the hdac_hdmi_runtime_suspend() function. The purpose of the jack
work is to enable/disable the dapm jack pin so it's not necessary to
cancel the work in runtime suspend function which is usually called
when pcm device is closed.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Link: https://lore.kernel.org/r/1594818110-786-1-git-send-email-brent.lu@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: Catpt - Lynx and Wildcat point" from Cezary Rojewski <cezary.rojewski@intel.com>:

Implement support for Lynxpoint and Wildcat Point AudioDSP. Catpt
solution deprecates existing sound/soc/intel/haswell which is removed in
the following series.

Due to high range of errors and desynchronization from recommendations
set by Windows solution, re-write came as a lower-cost solution compared
to refactoring /haswell/ with several series of patches.

Series is dependent on linux-spi change:
spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers
https://www.spinics.net/lists/linux-spi/msg23885.html
which has been already merged and is now part of linux-spi tree.

Bulk of series content is device driver core code - everything up to
patch 7/14 - with fs entries and trace macros introduced right after.
While each core patch is shaped in such a way that no unavailable
members are ever called, until patch 14/14 is applied, no code
compilation can occur as no Makefile is present. Once said patch is
added, Makefile and Kconfig are implemented and driver module compiles
as expected.

Special thanks go to Marcin Barlik and Piotr Papierkowski for sharing
their LPT/WPT AudioDSP architecture expertise as well as helping
backtrack its historical background.
My thanks go to Amadeusz Slawinski for reviews and improvements proposed
on and off the internal list. Most of internal diff below is his
contribution.
Krzysztof Hejmowski helped me setup my own Xtensa environment and
recompile LPT/WPT FW binary sources what sped up the development greatly.

This would not have been possible without help from these champions,
especially considering how quickly the catpt was written: 2 weeks
features, 3 weeks optimizations. Thank you.

Userspace-exposed members are compatible with what is exposed by
deprecated solution as well as FW binary being re-used thus no harm is
done. The only visible differences are: the newly added 'Loopback Mute'
kcontrol and volume support extending to quad from stereo.

On top of fixing erros and design flows, catpt also adds module reload,
dynamic SRAM memory allocation during PCM runtime and exposes missing
userspace API: 'Loopback Mute' kcontrol, quad volume controls and sysfs
fw-version entries. Event tracing is provided to ease solution
debugging.

Following are not included in this update and are scheduled as later
addition:
- fw logging
- module (library) support

Note: LPT power up/down sequences might get aligned with WPT once enough
testing is done as capabilities are shared for both DSPs.
Note #2: Both LPT and WPT power up/down sequences may get optimized in
future updates as thanks to help from the Windows team, most of nuances
behind why/what/when in regard to hw registers have been backtracked and
reviewed again.

Link to developer's deep dive message:
https://www.spinics.net/lists/alsa-devel/msg113563.html

Changes in v10:
- reverted DUAL_MONO case relocation from v9
- indented all constants of enum catpt_module_id to the same column
- new newline appended for return path of catpt_dsp_do_send_msg()

Changes in v9:
https://www.spinics.net/lists/alsa-devel/msg116305.html
- fixed newlines in sysfs as requested by Andy, left tags as no other
  changes done
- removed volume_map and replaced by simple formulas for volume kcontrol
  calculations
- removed redundant parentheses in catpt_get_channel_map() and
  relocated DUAL_MONO case
- runtime suspend no longer called during module unload
- removed redundant size checks for catpt_dsp_send_tx() and
  catpt_dsp_copy_rx()

Changes in v8:
https://www.spinics.net/lists/alsa-devel/msg116168.html
- updated catpt_arrange_page_table() with GENMASK and U32_MAX usage
- made use of PFN_DOWN() replacing explicit right shitfs by PAGE_SIZE
- made fw hash dumping in catpt_coredump() more readable and removed
  hardcodes
- catpt_coredump() dumps fw hash now only if said segment has been found
  within fw_info
- shortened _MSECS suffixes to _MS
- IPC structs no longer contain enum members
- simplified definition of catpt_set_dspvol()

Changes in v7:
https://www.spinics.net/lists/alsa-devel/msg116019.html
- fixed licence header for fs.c
- renamed fs.c to sysfs.c to better match its purpose
- added documentation within Documentation/ABI/testing for entries
  exposed by catpt
- bin_attribute fw_build replaced by attribute fw_info:
  fw_info contains full FW information and after successful handshake,
  it's always available (stored in driver data) so no need to invoke
  GET_FW_VERSION IPC again, just dump the stored information
- rather than manually creating and removing sysfs files, now makes use
  of dev_groups member of struct device_driver
- patch: 10/14 'ASoC: Intel: Select catpt and deprecate haswell' has
  been moved to the back of the list: enable catpt after machine boards
  have been prepared for it first
- improved readability of several goto labels

Changes in v6:
https://www.spinics.net/lists/alsa-devel/msg115765.html
- reordered and reorganized code for patches 1/13 - 8/13 of v5, so each
  patches makes use of no member or function which is unavailable to it.
  Series size increased from 13 to 14 patches: addition of base members
  e.g.: registers has been split from addition of device.c file which
  describes acpi device behavior

Changes in v5:
https://www.spinics.net/lists/alsa-devel/msg115621.html
Basically everything below is result of Andy's review. Thank you Andy
for taking time into this detailed review

- catpt now makes use of common linux/pxa2xx_ssp.h header file, removing
  redundant SSP register declarations in the process. As stated in the
  opening, this is dependent upon linux-spi change:
  spi: pxa2xx: Add SSC2 and SSPSP2 SSP registers

- updated Kconfig by removing DMADEVICES and adding COMPILE_TEST
  as optional depends-on
- updated all register macros definitions to be more safe against common
  arithmetics when specifying macro's parameters
- removed CONFIG_PM and CONFIG_PM_SLEEP usage in favor of __maybe_unused
- all 'if (ret < 0)' converted to simple 'if (ret)' whenever possible
- fixed erroneous check for platform_device_register_data within
  catpt_register_board()
- _SLAVE/_MASTER replaced with more inclusive _CONSUMER/_PROVIDER for
  enum catpt_ssp_mode
- catpt_acpi_probe() is now making use of high-level wrappers for
  ioremapping and resource assignment, reducing function's code size
- due to improved catpt_acpi_probe() behavior, catpt_acpi_remove() needs
  not to cast dma_free_coherent() any longer
- DMA source and destrination maxburst now of value 16, see:
https://www.spinics.net/lists/alsa-devel/msg114394.html

- simplified catpt_dsp_update_lpclock() as list_for_each_entry() is
  empty-safe by default
- dropped '_SSP_' from all names of all CATPT_SSP_SSXXX_DEFAULT macros
- catpt_updatel_pci now makes use of linux/pci.h and uapi/linux/pci.h
  constants such as: PCI_PM_CTRL_STATE_MASK and PCI_D3hot

Changes in v4:
https://www.spinics.net/lists/alsa-devel/msg113762.html
- fixed compilation with i386 kconfig (conflicting names)
- streamlined naming for SHIM and PCI registers to match SSP ones
  (SHIM_REG -> SHIM)
- catpt_component_probe removed and kcontrols again initializzed
  statically via snd_kcontrol_new array: this is to remove
  kctl->id.device shenanigans
- renamed catpt_set_ctlvol to catpt_set_dspvol - function name wasn't
  matching its purpose

Changes in v3:
- fixed IRAM mask usage in lpt_dsp_power_up (dsp.c)
- updated dbg message formatting in catpt_restore_fwimage as suggested
  by Andy
- fixed alignment for struct catpt_ssp_device_format
- catpt_set_ctlvol now verifies all-equal scenario based on all
  channels rather than just first two as requested by Amadeo
- fixed SPDX for registers.h

Changes in v2:
https://www.spinics.net/lists/alsa-devel/msg113660.html
- fixed SPDX formatting for all header files as well as pcm.c
- fixed size provided to memcpy() in fw_build_read() as reported by Mark
- renamed struct catpt_pdata to struct catpt_spec (cosmetic)
- fixed erroneous path in catpt_load_block: region is properly released
- trace.h events for updating registers have been removed and usages
  replaced by dev_dbg (SRAMPGE/ LPCS)

- as requested by Andy, struct resource has replaced struct catpt_mbank
  and struct catpt_mregion. This change cascaded into:

  - catpt_mbank_size and catpt_mregion_size replaced by resource_size
  - catpt_mregion_intersects replaced by resource_overlaps
  - all catpt_mbank_ and catpt_mregion_ handlers found in loader.c
    (_request, _reserve, _release, _extract, _split, _join) have been
    removed
  - __request_region and __release_region have been enlisted in their
    place
  - catpt_mregion_intersecting renamed to catpt_resource_overlapping
  - catpt_request_region helper has been provided to deal with -size
    based requests
      o haven't found direct replacements in resource.c/ ioport.h for
      both functions

  - catpt_mbank_create and catpt_mbank_remove renamed to catpt_sram_init
    and catpt_sram_free respectively
  - catpt_sram_init now returns void instead of int and has been
    converted to simple initialized. This change ultimately cascaded
    into:
      o both SRAM banks initialization being moved to catpt_dev_init
        from catpt_acpi_probe (device.c)
      o catpt_dev::spec is now initialized first, with catpt_dev_init
        following it soon after
      o catpt_acpi_probe erroneous path has been simplified as SRAM
        banks no longer need to be freed

  - catpt_sram_free now frees all resources via child -> sibling
    enumeration rather than region_list iteration
  - catpt_dsp_update_srampge and catpt_dsp_set_srampge now accept new
    argument: unsigned long mask. Caused by removal of catpt_mbank -
    mask is taken directly from catpt_dev::spec::d/iram_mask
  - trace.h events for catpt_mbank and catpt_mregion have been removed

Diff against last drop on internal list:
https://www.spinics.net/lists/alsa-devel/msg113549.html
- replaced spinlock with mutex for mregion allocation and release to
  address sleeping in atomic context warnings
- fixed coredump fw_hash dumping
- kcontrol values are now always stored regardless of stream of interest
  is running or not
- kcontrol values are now applied after stream is prepared instead of
  ignoring what has been set by user initially
- catpt_pdata instances have been renamed from hsw_ and bdw_ to lpt_ and
  wpt_ respectively
- reordered Makefile .o(s) (cosmetic)

Cezary Rojewski (14):
  ASoC: Intel: Add catpt base members
  ASoC: Intel: catpt: Implement IPC protocol
  ASoC: Intel: catpt: Add IPC message handlers
  ASoC: Intel: catpt: Define DSP operations
  ASoC: Intel: catpt: Firmware loading and context restore
  ASoC: Intel: catpt: PCM operations
  ASoC: Intel: catpt: Device driver lifecycle
  ASoC: Intel: catpt: Event tracing
  ASoC: Intel: catpt: Simple sysfs attributes
  ASoC: Intel: haswell: Remove haswell-solution specific code
  ASoC: Intel: broadwell: Remove haswell-solution specific code
  ASoC: Intel: bdw-5650: Remove haswell-solution specific code
  ASoC: Intel: bdw-5677: Remove haswell-solution specific code
  ASoC: Intel: Select catpt and deprecate haswell

 .../ABI/testing/sysfs-bus-pci-devices-catpt   |   16 +
 sound/soc/intel/Kconfig                       |   24 +-
 sound/soc/intel/Makefile                      |    2 +-
 sound/soc/intel/boards/Kconfig                |    8 +-
 sound/soc/intel/boards/bdw-rt5650.c           |   36 -
 sound/soc/intel/boards/bdw-rt5677.c           |   33 -
 sound/soc/intel/boards/broadwell.c            |   33 -
 sound/soc/intel/boards/haswell.c              |   28 +-
 sound/soc/intel/catpt/Makefile                |    6 +
 sound/soc/intel/catpt/core.h                  |  188 +++
 sound/soc/intel/catpt/device.c                |  352 +++++
 sound/soc/intel/catpt/dsp.c                   |  578 ++++++++
 sound/soc/intel/catpt/ipc.c                   |  298 +++++
 sound/soc/intel/catpt/loader.c                |  671 ++++++++++
 sound/soc/intel/catpt/messages.c              |  313 +++++
 sound/soc/intel/catpt/messages.h              |  401 ++++++
 sound/soc/intel/catpt/pcm.c                   | 1175 +++++++++++++++++
 sound/soc/intel/catpt/registers.h             |  178 +++
 sound/soc/intel/catpt/sysfs.c                 |   55 +
 sound/soc/intel/catpt/trace.h                 |   83 ++
 20 files changed, 4335 insertions(+), 143 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-pci-devices-catpt
 create mode 100644 sound/soc/intel/catpt/Makefile
 create mode 100644 sound/soc/intel/catpt/core.h
 create mode 100644 sound/soc/intel/catpt/device.c
 create mode 100644 sound/soc/intel/catpt/dsp.c
 create mode 100644 sound/soc/intel/catpt/ipc.c
 create mode 100644 sound/soc/intel/catpt/loader.c
 create mode 100644 sound/soc/intel/catpt/messages.c
 create mode 100644 sound/soc/intel/catpt/messages.h
 create mode 100644 sound/soc/intel/catpt/pcm.c
 create mode 100644 sound/soc/intel/catpt/registers.h
 create mode 100644 sound/soc/intel/catpt/sysfs.c
 create mode 100644 sound/soc/intel/catpt/trace.h

--
2.17.1

Fix a build error and Kconfig warning in sound/soc/qcom/.

ld: sound/soc/qcom/qdsp6/q6afe-clocks.o: in function `q6afe_clock_dev_probe':
q6afe-clocks.c:(.text+0x182): undefined reference to `devm_clk_hw_register'
ld: q6afe-clocks.c:(.text+0x19d): undefined reference to `of_clk_add_hw_provider'

After adding "depends on COMMON_CLK" for SND_SOC_QDSP6, the Kconfig
warning appears because "select" does not honor any "depends on"
clauses, so fix the dependency for SND_SOC_SDM845 also.

WARNING: unmet direct dependencies detected for SND_SOC_QDSP6
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && COMMON_CLK [=n]
  Selected by [y]:
  - SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_QCOM [=y] && QCOM_APR [=y] && I2C [=y] && SOUNDWIRE [=y]

Fixes: 520a1c39 ("ASoC: q6afe-clocks: add q6afe clock controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20201001183537.5781-1-rdunlap@infradead.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Prevent sound/soc/intel/haswell code compile and select catpt instead as
a recommended solution. Userspace-exposed members are compatible with
what is exposed by deprecated solution thus no harm is done. The only
visible difference is the newly added 'Loopback Mute' kcontrol.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-15-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-14-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-13-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-12-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove code specific to sound/soc/intel/haswell. Update BE dai_link
definition to provide seamless transition to catpt solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-11-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add sysfs entries for displaying version of FW currently in use as well
as dumping full FW information including build and log-providers hashes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-10-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Define tracing macros for easy catpt debug. These cover all IPC message
types: requests, replies and notifications.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-9-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Implement ACPI device probing and removal functions as well as handlers
for its PM capabilities. Device probing also takes care of enumerating
ADSP subsystem components.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-8-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

DSP designed for Lynxpoint and Wildcat Point offers no dynamic topology
i.e. all pipelines are already defined within firmware and host is
relegated to allocing stream for predefined pins. This is represented by
'catpt_topology' member.

Implementation covers all available pin types:
- system playback and capture
- two offload streams
- loopback (reference)
- bluetooth playback and capture

PCM DAI operations differentiate between those pins as some (mainly
offload) are to be handled differently - DSP expects wp updates on each
notify_position notification.

System playback has no volume control capability as it is routed to
mixer stream directly. Other primary streams - capture and two offloads
- offer individual volume controls.

Compared to sound/soc/intel/haswell this configures SSP device format
automatically on pcm creation.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-7-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

For Lynxpoint and Wildcat Point solution, is it host's responsibility to
allocate SRAM regions and ensure those already taken are not overwritten
with other data until released. Blocks are transferred to SRAM - either
IRAM or DRAM - via DW DMA controller. Once basefw is booted, ownership
of DMA transfer is lost in favour of DSP.

Hosts reponsibilities don't end on initial block allocation and binary
transfer. During Dx transitions host must store FW runtime context from
DRAM before putting AudioDSP subsystem into lower power state. Said
context gets flashed after D0 entry to bring DSP right where it was just
before suspending.

Load and restore procedures are finalized with SRAM power gating and
adequate clock level selection. This power gates unused EBBs and clock
speed effectively reducing power consumption.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Implement dsp lifecycle functions such as core RESET and STALL,
SRAM power control and LP clock selection. This also adds functions for
handling transport over DW DMA controller.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-5-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Declare global and stream IPC message handlers for all known message
types.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-4-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Implement IRQ handlers for immediate and delayed replies and
notifications. Communication is synchronous and allows for serialization
of maximum one message at a time.

DSP may respond with ADSP_PENDING status for a request - known as
delayed reply - and when situation occurs, framework keeps the lock and
awaits upcoming response through IPCD channel which is handled in
bottom-half. Immediate replies spawn no BH at all as their processing is
very short.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-3-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Declare base structures, registers and extension routines for the catpt
solution.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200929141247.8058-2-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update list of SSP registers with SSC2 and SSPSP2. These registers are
utilized by LPT/WPT AudioDSP architecture.

While SSC2 shares the same offset (0x40) as SSACDD, description of this
register for SSP device present on mentioned AudioDSP is different so
define separate constant to avoid any ambiguity.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200825201743.4926-1-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The function fsl_spdif_probe() is only called with an openfirmware
platform device. Therefore there is no need to check that the passed
in device is NULL.
Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200826150918.16116-1-tangbin@cmss.chinamobile.comSigned-off-by: Mark Brown <broonie@kernel.org>

The binding was added in 2013 and has had no driver since 2015.

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200826184851.3431531-1-robh@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

commit 140a4532 ("ASoC: soc-pcm: add soc_pcm_clean() and call it
from soc_pcm_open/close()") switched to use soc_pcm_clean() at
soc_pcm_open().

But it removed "return 0", and missing "ret = 0",
because of it, it always return -EINVAL eventhough no error.
This patch adds missing "ret = 0" for success case.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/87ft6ya65z.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

commit 140a4532 ("ASoC: soc-pcm: add soc_pcm_clean() and call it
from soc_pcm_open/close()") switch to call soc_pcm_clean() on
soc_pcm_open() when rollback case.

But, it uses "goto err" (A) *before* mutex_lock() (B) when error of
snd_soc_pcm_component_pm_runtime_get().
The mutex_unlock() (C) is not needed in such case. This patch fix it.

	static int soc_pcm_open(...)
	{
		...
		ret = snd_soc_pcm_component_pm_runtime_get(rtd, substream);
		if (ret < 0)
(A)			goto err;

(B)		mutex_lock_nested(...);
		...
	err:
(C)		mutex_unlock(..);
		...
	}
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k0waag44.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using devm_snd_soc_register_card() can make the code
shorter and cleaner.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200929112939.47661-1-miaoqinglang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using devm_snd_soc_register_card() can make the code
shorter and cleaner.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200929112932.46926-1-miaoqinglang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using devm_snd_soc_register_card() can make the code
shorter and cleaner.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200929112936.47441-1-miaoqinglang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20200922015123.117489-1-zhangqilong3@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using devm_snd_soc_register_card() can make the code
shorter and cleaner.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200929112938.47599-1-miaoqinglang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using devm_snd_soc_register_card() can make the code
shorter and cleaner.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200929112935.47035-1-miaoqinglang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using devm_snd_soc_register_card() can make the code
shorter and cleaner.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200929112930.46848-1-miaoqinglang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since commit 95e0e07e ("ASoC: atmel-pcm: use generic dmaengine
framework"), the driver is using dmaengine and is not using any definition
from include/linux/platform_data/dma-atmel.h, stop including it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930145330.3043528-1-alexandre.belloni@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since commit d5fab59c ("spi: atmel: trivial: remove unused fields in
DMA structure"), the driver is not using any definitions from
linux/platform_data/dma-atmel.h, stop including it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930145353.3043699-1-alexandre.belloni@bootlin.comSigned-off-by: Mark Brown <broonie@kernel.org>

Using devm_snd_soc_register_card() can make the code
shorter and cleaner.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Link: https://lore.kernel.org/r/20200929112933.46977-1-miaoqinglang@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: merge soc_pcm_open() rollback and soc_pcm_close()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

Hi Mark

1 month past and nothing happened.
This is resend of v2 patch-set.

soc_pcm_open() does rollback when failed (A),
but, it is almost same as soc_pcm_close().

	static int soc_pcm_open(xxx)
	{
		...
		if (ret < 0)
			goto xxx_err;
		...
		return 0;

 ^	config_err:
 |		...
 |	rtd_startup_err:
(A)		...
 |	component_err:
 |		...
 v		return ret;
	}

This kind of duplicated code can be a hotbed of bugs,
thus, this patch-set share soc_pcm_close() and rollback.

v1 -> v2
	- indicate more detail background/logic on git-log

Link: https://lore.kernel.org/r/87wo2oku0m.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87wo1kvozz.wl-kuninori.morimoto.gx@renesas.com

Kuninori Morimoto (7):
  ASoC: soc-dai: add mark for snd_soc_dai_startup/shutdown()
  ASoC: soc-link: add mark for snd_soc_link_startup/shutdown()
  ASoC: soc-component: add mark for soc_pcm_components_open/close()
  ASoC: soc-component: add mark for
    snd_soc_pcm_component_pm_runtime_get/put()
  ASoC: soc-pcm: add soc_pcm_clean() and call it from
    soc_pcm_open/close()
  ASoC: soc-pcm: remove unneeded dev_err() for snd_soc_dai_startup()
  ASoC: soc-pcm: remove unneeded dev_err() for
    snd_soc_component_module/open()

 include/sound/soc-component.h |  28 +++++---
 include/sound/soc-dai.h       |   5 +-
 include/sound/soc-link.h      |   3 +-
 include/sound/soc.h           |   3 +
 sound/soc/soc-component.c     |  73 ++++++++++++++++++++-
 sound/soc/soc-compress.c      |  30 +++------
 sound/soc/soc-dai.c           |  21 +++++-
 sound/soc/soc-dapm.c          |   4 +-
 sound/soc/soc-link.c          |  21 +++++-
 sound/soc/soc-pcm.c           | 120 ++++++++++++----------------------
 10 files changed, 190 insertions(+), 118 deletions(-)

--
2.25.1

use new devm_regmap_field_bulk_alloc to allocate fields as
it make the code more readable!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20200925164856.10315-3-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge tag 'regmap-field-bulk-api' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-5.10

regmap: Add a bulk field API

Useful for devices with many fields.

Usage of regmap_field_alloc becomes much overhead when number of fields
exceed more than 3.
QCOM LPASS driver has extensively converted to use regmap_fields.

Using new bulk api to allocate fields makes it much more cleaner code to read!
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/20200925164856.10315-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The CS4234 is a highly versatile CODEC that combines 4 channels of
high performance analog to digital conversion, 4 channels of high
performance digital to analog conversion for audio, and 1 channel of
digital to analog conversion to provide a nondelayed audio reference
signal to an external Class H tracking power supply.

DAC5 is only supported as a 5th audio channel. Tracking Power Supply
mode is not currently supported by the driver.

In DSP_A mode the slots for DAC1-4 and optionally DAC5 can be set.
The codec always claims 4 slots for DAC1-4 and these must be in the
same nibble of the mask. The codec has a fixed mapping for ADC slots.

In I2S/LJ modes the codec has a fixed mapping for DAC1-4 and ADC1-4.
DAC5 is not available in these modes.

The MCLK source must be preset to a valid frequency before probe()
because it must be running all the time the codec is out of reset.

The VA_SEL bit will be set automatically to 3.3v or 5v during probe()
based on the reported voltage of the regulator supplying VA.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200928111821.26967-2-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document the bindings for the CS4234 ASoC codec driver.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20200928111821.26967-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The power of "MICBIAS" and "Vref2" was needed while the DMIC clcok was from
the PLL output.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/20200928053912.16664-1-oder_chiou@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Remove the use of of_match_ptr() macro for of_match_table to fix compiler
warning when CONFIG_OF=n:

sound/soc/ti/j721e-evm.c:528:34: warning: unused variable 'j721e_audio_of_match' [-Wunused-const-variable]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200928074330.13029-1-peter.ujfalusi@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>