- 27 Jan, 2020 40 commits
-
-
Nathan Chancellor authored
[ Upstream commit e8edc32d ] Clang warns: drivers/staging/rtlwifi/halmac/halmac_88xx/halmac_func_88xx.c:2472:11: warning: implicit conversion from enumeration type 'enum halmac_cmd_process_status' to different enumeration type 'enum halmac_ret_status' [-Wenum-conversion] return HALMAC_CMD_PROCESS_ERROR; ~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. Fix this by using the proper enum for allocation failures, HALMAC_RET_MALLOC_FAIL, which is used in the rest of this file. Fixes: e4b08e16 ("staging: r8822be: check kzalloc return or bail") Link: https://github.com/ClangBuiltLinux/linux/issues/375Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric W. Biederman authored
[ Upstream commit 40cc394b ] In the rare and unsupported case of a hostname list nfs_parse_devname will modify dev_name. There is no need to modify dev_name as the all that is being computed is the length of the hostname, so the computed length can just be shorted. Fixes: dc045898 ("NFS: Use common device name parsing logic for NFSv4 and NFSv2/v3") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Russell King authored
[ Upstream commit 9c2054a5 ] When a DSA port is added to a bridge and brought up, the resulting STP state programmed into the hardware depends on the order that these operations are performed. However, the Linux bridge code believes that the port is in disabled mode. If the DSA port is first added to a bridge and then brought up, it will be in blocking mode. If it is brought up and then added to the bridge, it will be in disabled mode. This difference is caused by DSA always setting the STP mode in dsa_port_enable() whether or not this port is part of a bridge. Since bridge always sets the STP state when the port is added, brought up or taken down, it is unnecessary for us to manipulate the STP state. Apparently, this code was copied from Rocker, and the very next day a similar fix for Rocker was merged but was not propagated to DSA. See e47172ab ("rocker: put port in FORWADING state after leaving bridge") Fixes: b73adef6 ("net: dsa: integrate with SWITCHDEV for HW bridging") Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 8d166720 ] The apq8016 driver leaves the of-node refcount at aborting from the loop of for_each_child_of_node() in the error path. Not only the iterator node of for_each_child_of_node(), the children nodes referred from it for codec and cpu have to be properly unreferenced. Fixes: bdb052e8 ("ASoC: qcom: add apq8016 sound card support") Cc: Patrick Lai <plai@codeaurora.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 36003d4c ] Commit 4c06c4e6 ("driver core: Fix possible supplier PM-usage counter imbalance") introduced a regression that causes suppliers to be suspended prematurely for device links added during consumer driver probe if the initial PM-runtime status of the consumer is "suspended" and the consumer is resumed after adding the link and before pm_runtime_put_suppliers() is called. In that case, pm_runtime_put_suppliers() will drop the rpm_active refcount for the link by one and (since rpm_active is equal to two after the preceding consumer resume) the supplier's PM-runtime usage counter will be decremented, which may cause the supplier to suspend even though the consumer's PM-runtime status is "active". For this reason, partially revert commit 4c06c4e6 as the problem it tried to fix needs to be addressed somewhat differently, and change pm_runtime_get_suppliers() and pm_runtime_put_suppliers() so that the latter only drops rpm_active references acquired by the former. [This requires adding a new field to struct device_link, but I coulnd't find a cleaner way to address the issue that would work in all cases.] This causes pm_runtime_put_suppliers() to effectively ignore device links added during consumer probe, so device_link_add() doesn't need to worry about ensuring that suppliers will remain active after pm_runtime_put_suppliers() for links created with DL_FLAG_RPM_ACTIVE set and it only needs to bump up rpm_active by one for those links, so pm_runtime_active_link() is not necessary any more. Fixes: 4c06c4e6 ("driver core: Fix possible supplier PM-usage counter imbalance") Reported-by:
Jon Hunter <jonathanh@nvidia.com> Tested-by:
Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 785cf1ee ] The NOUVEAU_GETPARAM_PCI_DEVICE case is missing a break statement and falls through to the following NOUVEAU_GETPARAM_BUS_TYPE case and may end up re-assigning the getparam->value to an undesired value. Fix this by adding in the missing break. Detected by CoverityScan, CID#1460507 ("Missing break in switch") Fixes: 359088d5 ("drm/nouveau: remove trivial cases of nvxx_device() usage") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b1d03fc3 ] Currently the uninitialized values in the array reply are printed out when exec is false and nvkm_pmu_send has not updated the array. Avoid confusion by only dumping out these values if they have been actually updated. Detected by CoverityScan, CID#1271291 ("Uninitialized scaler variable") Fixes: ebb58dc2 ("drm/nouveau/pmu: rename from pwr (no binary change)") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 13649101 ] Currently, the expression for calculating RON is always going to result in zero no matter the value of ram->mr[1] because the ! operator has higher precedence than the shift >> operator. I believe the missing parentheses around the expression before appying the ! operator will result in the desired result. [ Note, not tested ] Detected by CoveritScan, CID#1324005 ("Operands don't affect result") Fixes: c25bf7b6 ("drm/nouveau/bios/ramcfg: Separate out RON pull value") Signed-off-by:
-
Leon Romanovsky authored
[ Upstream commit 56642837 ] fpga_qpn was assigned but never used and compilation with W=1 produced the following warning: drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c: In function _mlx5_fpga_event_: drivers/net/ethernet/mellanox/mlx5/core/fpga/core.c:320:6: warning: variable _fpga_qpn_ set but not used [-Wunused-but-set-variable] u32 fpga_qpn; ^~~~~~~~ Fixes: 98db16ba ("net/mlx5: FPGA, Handle QP error event") Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Vinod Koul authored
[ Upstream commit a968b5e9 ] RGMII_ID specifies that we should have internal delay, so resurrect the delay addition routine but under the RGMII_ID mode. Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode") Tested-by:
Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Axel Lin authored
[ Upstream commit a5455c91 ] Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1. Fixes: c90456e3 ("regulator: pv88090: new regulator driver") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Axel Lin authored
[ Upstream commit 3c413f59 ] Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1. Fixes: 99cf3af5 ("regulator: pv88080: new regulator driver") Signed-off-by:
-
Axel Lin authored
[ Upstream commit 7cd415f8 ] Fix off-by-one while iterating current_limits array. The valid index should be 0 ~ n_current_limits -1. Fixes: f307a7e9 ("regulator: pv88060: new regulator driver") Signed-off-by:
-
Arend van Spriel authored
[ Upstream commit aaf6a5e8 ] Since we moved the drivers debugfs directory under ieee80211 debugfs the debugfs entries need to be added after wiphy_register() has been called. For most part that has been done accordingly, but for the debugfs entries added by SDIO it was not and failed silently. This patch fixes that by adding a bus-layer callback for it. Fixes: 856d5a01 ("brcmfmac: allocate struct brcmf_pub instance using wiphy_new()") Reported-by:
Russel King <linux@armlinux.org.uk> Reviewed-by:
Franky Lin <franky.lin@broadcom.com> Signed-off-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 0742a338 ] 'rv' is the correct return value, pass it upstream instead of 0 Fixes: 17d80d56 ("USB: autosuspend for cdc-wdm") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Robin Murphy authored
[ Upstream commit 3e5daee5 ] Using dma_dev->dev for mappings before it's assigned with the correct device is unlikely to work as expected, and with future dma-direct changes, passing a NULL device may end up crashing entirely. I don't know enough about this hardware or the mv_xor_prep_dma_interrupt() operation to implement the appropriate error-handling logic that would have revealed those dma_map_single() calls failing on arm64 for as long as the driver has been enabled there, but moving the assignment earlier will at least make the current code operate as intended. Fixes: 22843545 ("dma: mv_xor: Add support for DMA_INTERRUPT") Reported-by:
John David Anglin <dave.anglin@bell.net> Tested-by:
Robin Murphy <robin.murphy@arm.com> Acked-by:
Thomas Petazzoni <thomas.petazzoni@bootlin.com> Tested-by:
-
Nicholas Mc Guire authored
[ Upstream commit e4b08e16 ] The kzalloc() in halmac_parse_psd_data_88xx() can fail and return NULL so check the psd_set->data after allocation and if allocation failed return HALMAC_CMD_PROCESS_ERROR. Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit a67614cc ] The SPAPR TCE KVM device references all hardware IOMMU tables assigned to some IOMMU group to ensure that in-kernel KVM acceleration of H_PUT_TCE can work. The tables are references when an IOMMU group gets registered with the VFIO KVM device by the KVM_DEV_VFIO_GROUP_ADD ioctl; KVM_DEV_VFIO_GROUP_DEL calls into the dereferencing code in kvm_spapr_tce_release_iommu_group() which walks through the list of LIOBNs, finds a matching IOMMU table and calls kref_put() when found. However that code stops after the very first successful derefencing leaving other tables referenced till the SPAPR TCE KVM device is destroyed which normally happens on guest reboot or termination so if we do hotplug and unplug in a loop, we are leaking IOMMU tables here. This removes a premature return to let kvm_spapr_tce_release_iommu_group() find and dereference all attached tables. Fixes: 121f80ba ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 780feae7 ] Fix coccinelle warning: ./drivers/net/phy/mdio_bus.c:51:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 ./drivers/net/phy/mdio_bus.c:52:5-12: ERROR: PTR_ERR applied after initialization to constant on line 44 fix this by using IS_ERR before PTR_ERR Fixes: bafbdd52 ("phylib: Add device reset GPIO support") Signed-off-by:
-
Vadim Pasternak authored
[ Upstream commit ff066653 ] Fix tps53679_probe() by using dynamically allocated "pmbus_driver_info" structure instead of static. Usage of static structures causes overwritten of the field "vrm_version", in case the system is equipped with several tps53679 devices with the different "vrm_version". In such case the last probed device overwrites this field for all others. Fixes: 61052652 ("hwmon: (pmbus) Add support for Texas Instruments tps53679 device") Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Eric Auger authored
[ Upstream commit 0cfd027b ] pci_map_rom/pci_get_rom_size() performs memory access in the ROM. In case the Memory Space accesses were disabled, readw() is likely to trigger a synchronous external abort on some platforms. In case memory accesses were disabled, re-enable them before the call and disable them back again just after. Fixes: 89e1f7d4 ("vfio: Add PCI device driver") Signed-off-by:
Eric Auger <eric.auger@redhat.com> Suggested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Jacopo Mondi authored
[ Upstream commit 5c88ee02 ] Since the removal of the stale soc_camera headers, Migo-R board fails to build due to missing dma-mapping include directive. Include missing dma-mapping.h header in Migo-R board file to fix the build error. Fixes: a50c7738 ("media: sh: migor: Remove stale soc_camera include") Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit cb83585e ] Move q->ndesc initialization before the for loop in mt76u_alloc_rx since otherwise allocated urbs will not be freed in mt76u_buf_free Double-check scatterlist pointer in mt76u_buf_free Fixes: b40b15e1 ("mt76: add usb support to mt76 layer") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 10163aae ] The CPU port is special and does not need to obey VLAN restrictions as far as untagged traffic goes, also, having the CPU port be part of a particular PVID is against the idea of keeping it tagged in all VLANs. Fixes: ca893194 ("net: dsa: b53: Keep CPU port as tagged in all VLANs") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit dad8d7c6 ] VLAN filtering can be built into the kernel, and also dynamically turned on/off through the bridge master device. Allow re-configuring the switch appropriately to account for that by deciding whether VLAN table (v_table) misses should lead to a drop or forward. Fixes: a2482d2c ("net: dsa: b53: Plug in VLAN support") Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit fea83353 ] We were not consistent in how the default VID of a given port was defined, b53_br_leave() would make sure the VLAN ID would be either 0/1 depending on the switch generation, but b53_configure_vlan(), which is the default configuration would unconditionally set it to 1. The correct value is 1 for 5325/5365 series and 0 otherwise. To avoid repeating that mistake ever again, introduce a helper function: b53_default_pvid() to factor that out. Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch") Signed-off-by:
-
David Howells authored
[ Upstream commit 7c1857bd ] Set the timestamp on new keys rather than leaving it unset. Fixes: 31d5a79d ("KEYS: Do LRU discard in full keyrings") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
James Morris <james.morris@microsoft.com> Signed-off-by:
-
Ming Lei authored
[ Upstream commit 1a67356e ] It is wrong to use bio->bi_vcnt to figure out how many segments there are in the bio even though CLONED flag isn't set on this bio, because this bio may be splitted or advanced. So always use bio_segments() in blk_recount_segments(), and it shouldn't cause any performance loss now because the physical segment number is figured out in blk_queue_split() and BIO_SEG_VALID is set meantime since bdced438 ("block: setup bi_phys_segments after splitting"). Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Fixes: 76d8137a ("blk-merge: recaculate segment if it isn't less than max segments") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Sven Van Asbroeck authored
[ Upstream commit 5895d311 ] In remove(), use cancel_delayed_work_sync() to cancel the delayed work. Otherwise there's a chance that this work will continue to run until after the device has been removed. This issue was detected with the help of Coccinelle. Cc: Tony Lindgren <tony@atomide.com> Cc: Bin Liu <b-liu@ti.com> Fixes: b6a619a8 ("usb: phy: Check initial state for twl6030") Signed-off-by:
Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Wen Yang authored
[ Upstream commit 726dabfd ] Functions copying from/to IO addresses should use the memcpy_fromio()/memcpy_toio() API rather than plain memcpy(). Fix the issue detected through the sparse tool. Fixes: 349e7a85 ("PCI: endpoint: functions: Add an EP function to test PCI") Suggested-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> [lorenzo.pieralisi@arm.com: updated log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
-
Rafael J. Wysocki authored
[ Upstream commit 4c06c4e6 ] If a stateless device link to a certain supplier with DL_FLAG_PM_RUNTIME set in the flags is added and then removed by the consumer driver's probe callback, the supplier's PM-runtime usage counter will be nonzero after that which effectively causes the supplier to remain "always on" going forward. Namely, device_link_add() called to add the link invokes device_link_rpm_prepare() which notices that the consumer driver is probing, so it increments the supplier's PM-runtime usage counter with the assumption that the link will stay around until pm_runtime_put_suppliers() is called by driver_probe_device(), but if the link goes away before that point, the supplier's PM-runtime usage counter will remain nonzero. To prevent that from happening, first rework pm_runtime_get_suppliers() and pm_runtime_put_suppliers() to use the rpm_active refounts of device links and make the latter only drop rpm_active and the supplier's PM-runtime usage counter for each link by one, unless rpm_active is one already for it. Next, modify device_link_add() to bump up the new link's rpm_active refcount and the suppliers PM-runtime usage counter by two, to prevent pm_runtime_put_suppliers(), if it is called subsequently, from suspending the supplier prematurely (in case its PM-runtime usage counter goes down to 0 in there). Due to the way rpm_put_suppliers() works, this change does not affect runtime suspend of the consumer ends of new device links (or, generally, device links for which DL_FLAG_PM_RUNTIME has just been set). Fixes: e2f3cd83 ("driver core: Fix handling of runtime PM flags in device_link_add()") Reported-by:
-
Mark Bloch authored
[ Upstream commit fc9e4477 ] Make sure the IB device is freed on failure. Fixes: b5ca15ad ("IB/mlx5: Add proper representors support") Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Bodong Wang <bodong@mellanox.com> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 0e6e448b ] There are two pin groups for the FSIC SPDIF signal, but the FSIC pin group array lists only one, and it refers to a nonexistent group. Fixes: 2ecd4154 ("sh-pfc: sh73a0: Add FSI pin groups and functions") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit b9fd5048 ] The vin1_data18_b pin group itself is present, but it is not listed in the VIN1 pin group array, and thus cannot be selected. Fixes: 7dd74bb1 ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit a4b03500 ] The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a typo, thus the group cannot be selected. Fixes: 50884519 ("pinctrl: sh-pfc: r8a7791 PFC support") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 1ecd8c9c ] The err_rst_reqb, ext_clki, lowpwr, and ref_clko pin groups are present, but no pinmux functions refer to them, hence they can not be selected. Fixes: 1e7d5d84 ("sh-pfc: Add emev2 pinmux support") Signed-off-by:
-
Wesley Sheng authored
[ Upstream commit d123fab7 ] The number of available NT req id mapping table entries per NTB control register is 512. The driver mistakenly limits the number to 256. Fix the array size of NT req id mapping table. Fixes: c082b04c ("NTB: switchtec: Add NTB hardware register definitions") Signed-off-by:
Wesley Sheng <wesley.sheng@microchip.com> Reviewed-by:
Logan Gunthorpe <logang@deltatee.com> Signed-off-by:
Jon Mason <jdmason@kudzu.us> Signed-off-by:
-
Paul Selles authored
[ Upstream commit cce8e04c ] Switchtec NTB crosslink BARs are 64bit addressed but they are printed as 32bit addressed BARs. Fix debug log to increment the BAR numbers by 2 to reflect the 64bit address alignment. Fixes: 01752501 ("ntb_hw_switchtec: Add initialization code for crosslink") Signed-off-by:
Paul Selles <paul.selles@microchip.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9e053523 ] The etnaviv_gem_prime_get_sg_table() is supposed to return error pointers. Otherwise it can lead to a NULL dereference when it's called from drm_gem_map_dma_buf(). Fixes: 5f4a4a73 ("drm/etnaviv: fix gem_prime_get_sg_table to return new SG table") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Magnus Karlsson authored
[ Upstream commit e6762c8b ] All the setup code in AF_XDP is protected by a mutex with the exception of the mmap code that cannot use it. To make sure that a process banging on the mmap call at the same time as another process is setting up the socket, smp_wmb() calls were added in the umem registration code and the queue creation code, so that the published structures that xsk_mmap needs would be consistent. However, the corresponding smp_rmb() calls were not added to the xsk_mmap code. This patch adds these calls. Fixes: 37b07693 ("xsk: add missing write- and data-dependency barrier") Fixes: c0c77d8f ("xsk: add user memory registration support sockopt") Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
