- 23 Jul, 2018 5 commits
-
-
Jia-Ju Bai authored
inject_cmd_complete() is only called by btusb_send_frame_intel(), which is set to hdev->send, and hdev->send() is never called in atomic context. inject_cmd_complete() calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Jia-Ju Bai authored
btmrvl_sdio_card_to_host() is never called in atomic context. It calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
bpa10x_send_frame() is only set to hdev->send, and hdev->send() is never called in atomic context. bpa10x_send_frame() calls usb_alloc_urb(), kmalloc() and usb_submit_urb() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
bluecard_hci_set_baud_rate() is never called in atomic context. bluecard_hci_set_baud_rate() is only by bluecard_hci_open(), which is set to hdev->open, and hdev->open() is never called in atomic context. bluecard_hci_set_baud_rate() calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
Jia-Ju Bai authored
bfusb_send_frame() is only set to hdev->send, and hdev->send() is never called in atomic context. bfusb_send_frame() calls bt_skb_alloc() with GFP_ATOMIC, which is not necessary. GFP_ATOMIC can be replaced with GFP_KERNEL. This is found by a static analysis tool named DCNS written by myself. I also manually check the kernel code before reporting it. Signed-off-by:
-
- 18 Jul, 2018 1 commit
-
-
Philipp Puschmann authored
Fixes this warning that was provoked by a pairing: [60258.016221] WARNING: possible recursive locking detected [60258.021558] 4.15.0-RD1812-BSP #1 Tainted: G O [60258.027146] -------------------------------------------- [60258.032464] kworker/u5:0/70 is trying to acquire lock: [60258.037609] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<87759073>] bt_accept_enqueue+0x3c/0x74 [60258.046863] [60258.046863] but task is already holding lock: [60258.052704] (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.062905] [60258.062905] other info that might help us debug this: [60258.069441] Possible unsafe locking scenario: [60258.069441] [60258.075368] CPU0 [60258.077821] ---- [60258.080272] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.085510] lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); [60258.090748] [60258.090748] *** DEADLOCK *** [60258.090748] [60258.096676] May be due to missing lock nesting notation [60258.096676] [60258.103472] 5 locks held by kworker/u5:0/70: [60258.107747] #0: ((wq_completion)%shdev->name#2){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.117263] #1: ((work_completion)(&hdev->rx_work)){+.+.}, at: [<9460d092>] process_one_work+0x130/0x4fc [60258.126942] #2: (&conn->chan_lock){+.+.}, at: [<7877c8c3>] l2cap_connect+0x80/0x4f8 [60258.134806] #3: (&chan->lock/2){+.+.}, at: [<2e16c724>] l2cap_connect+0x8c/0x4f8 [60258.142410] #4: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+.}, at: [<d22d7106>] l2cap_sock_new_connection_cb+0x1c/0x88 [60258.153043] [60258.153043] stack backtrace: [60258.157413] CPU: 1 PID: 70 Comm: kworker/u5:0 Tainted: G O 4.15.0-RD1812-BSP #1 [60258.165945] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [60258.172485] Workqueue: hci0 hci_rx_work [60258.176331] Backtrace: [60258.178797] [<8010c9fc>] (dump_backtrace) from [<8010ccbc>] (show_stack+0x18/0x1c) [60258.186379] r7:80e55fe4 r6:80e55fe4 r5:20050093 r4:00000000 [60258.192058] [<8010cca4>] (show_stack) from [<809864e8>] (dump_stack+0xb0/0xdc) [60258.199301] [<80986438>] (dump_stack) from [<8016ecc8>] (__lock_acquire+0xffc/0x11d4) [60258.207144] r9:5e2bb019 r8:630f974c r7:ba8a5940 r6:ba8a5ed8 r5:815b5220 r4:80fa081c [60258.214901] [<8016dccc>] (__lock_acquire) from [<8016f620>] (lock_acquire+0x78/0x98) [60258.222655] r10:00000040 r9:00000040 r8:808729f0 r7:00000001 r6:00000000 r5:60050013 [60258.230491] r4:00000000 [60258.233045] [<8016f5a8>] (lock_acquire) from [<806ee974>] (lock_sock_nested+0x64/0x88) [60258.240970] r7:00000000 r6:b796e870 r5:00000001 r4:b796e800 [60258.246643] [<806ee910>] (lock_sock_nested) from [<808729f0>] (bt_accept_enqueue+0x3c/0x74) [60258.255004] r8:00000001 r7:ba7d3c00 r6:ba7d3ea4 r5:ba7d2000 r4:b796e800 [60258.261717] [<808729b4>] (bt_accept_enqueue) from [<808aa39c>] (l2cap_sock_new_connection_cb+0x68/0x88) [60258.271117] r5:b796e800 r4:ba7d2000 [60258.274708] [<808aa334>] (l2cap_sock_new_connection_cb) from [<808a294c>] (l2cap_connect+0x190/0x4f8) [60258.283933] r5:00000001 r4:ba6dce00 [60258.287524] [<808a27bc>] (l2cap_connect) from [<808a4a14>] (l2cap_recv_frame+0x744/0x2cf8) [60258.295800] r10:ba6dcf24 r9:00000004 r8:b78d8014 r7:00000004 r6:bb05d000 r5:00000004 [60258.303635] r4:bb05d008 [60258.306183] [<808a42d0>] (l2cap_recv_frame) from [<808a7808>] (l2cap_recv_acldata+0x210/0x214) [60258.314805] r10:b78e7800 r9:bb05d960 r8:00000001 r7:bb05d000 r6:0000000c r5:b7957a80 [60258.322641] r4:ba6dce00 [60258.325188] [<808a75f8>] (l2cap_recv_acldata) from [<8087630c>] (hci_rx_work+0x35c/0x4e8) [60258.333374] r6:80e5743c r5:bb05d7c8 r4:b7957a80 [60258.338004] [<80875fb0>] (hci_rx_work) from [<8013dc7c>] (process_one_work+0x1a4/0x4fc) [60258.346018] r10:00000001 r9:00000000 r8:baabfef8 r7:ba997500 r6:baaba800 r5:baaa5d00 [60258.353853] r4:bb05d7c8 [60258.356401] [<8013dad8>] (process_one_work) from [<8013e028>] (worker_thread+0x54/0x5cc) [60258.364503] r10:baabe038 r9:baaba834 r8:80e05900 r7:00000088 r6:baaa5d18 r5:baaba800 [60258.372338] r4:baaa5d00 [60258.374888] [<8013dfd4>] (worker_thread) from [<801448f8>] (kthread+0x134/0x160) [60258.382295] r10:ba8310b8 r9:bb07dbfc r8:8013dfd4 r7:baaa5d00 r6:00000000 r5:baaa8ac0 [60258.390130] r4:ba831080 [60258.392682] [<801447c4>] (kthread) from [<801080b4>] (ret_from_fork+0x14/0x20) [60258.399915] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:801447c4 [60258.407751] r4:baaa8ac0 r3:baabe000 Signed-off-by:Philipp Puschmann <pp@emlix.com> Signed-off-by:
-
- 16 Jul, 2018 1 commit
-
-
Sudip Mukherjee authored
slub debug reported: [ 440.648642] ============================================================================= [ 440.648649] BUG kmalloc-1024 (Tainted: G BU O ): Poison overwritten [ 440.648651] ----------------------------------------------------------------------------- [ 440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b [ 440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047 [ 440.648671] ___slab_alloc.constprop.24+0x1fc/0x292 [ 440.648675] __slab_alloc.isra.18.constprop.23+0x1c/0x25 [ 440.648677] __kmalloc+0xb6/0x17f [ 440.648680] sk_prot_alloc+0x6b/0xc6 [ 440.648683] sk_alloc+0x1e/0xa1 [ 440.648700] sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth] [ 440.648716] sco_connect_cfm+0x166/0x281 [bluetooth] [ 440.648731] hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth] [ 440.648746] hci_event_packet+0x28b/0x2326 [bluetooth] [ 440.648759] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648764] process_one_work+0x163/0x2b2 [ 440.648767] worker_thread+0x1a9/0x25c [ 440.648770] kthread+0xf8/0xfd [ 440.648774] ret_from_fork+0x2e/0x38 [ 440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047 [ 440.648782] __slab_free+0x4b/0x27a [ 440.648784] kfree+0x12e/0x155 [ 440.648787] __sk_destruct+0xd3/0xdf [ 440.648790] sk_destruct+0x27/0x29 [ 440.648793] __sk_free+0x75/0x91 [ 440.648795] sk_free+0x1c/0x1e [ 440.648810] sco_sock_kill+0x5a/0x5f [bluetooth] [ 440.648825] sco_conn_del+0x8e/0xba [bluetooth] [ 440.648840] sco_disconn_cfm+0x3a/0x41 [bluetooth] [ 440.648855] hci_event_packet+0x45e/0x2326 [bluetooth] [ 440.648868] hci_rx_work+0x161/0x291 [bluetooth] [ 440.648872] process_one_work+0x163/0x2b2 [ 440.648875] worker_thread+0x1a9/0x25c [ 440.648877] kthread+0xf8/0xfd [ 440.648880] ret_from_fork+0x2e/0x38 [ 440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x (null) flags=0x40008100 [ 440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8 When KASAN was enabled, it reported: [ 210.096613] ================================================================== [ 210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127 [ 210.096641] Write of size 4 at addr ffff880107e17160 by task kworker/u9:1/2040 [ 210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G U O 4.14.47-20180606+ #2 [ 210.096654] Hardware name: , BIOS 2017.01-00087-g43e04de 08/30/2017 [ 210.096693] Workqueue: hci0 hci_rx_work [bluetooth] [ 210.096698] Call Trace: [ 210.096711] dump_stack+0x46/0x59 [ 210.096722] print_address_description+0x6b/0x23b [ 210.096729] ? ex_handler_refcount+0x5b/0x127 [ 210.096736] kasan_report+0x220/0x246 [ 210.096744] ex_handler_refcount+0x5b/0x127 [ 210.096751] ? ex_handler_clear_fs+0x85/0x85 [ 210.096757] fixup_exception+0x8c/0x96 [ 210.096766] do_trap+0x66/0x2c1 [ 210.096773] do_error_trap+0x152/0x180 [ 210.096781] ? fixup_bug+0x78/0x78 [ 210.096817] ? hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096824] ? __schedule+0x113b/0x1453 [ 210.096830] ? sysctl_net_exit+0xe/0xe [ 210.096837] ? __wake_up_common+0x343/0x343 [ 210.096843] ? insert_work+0x107/0x163 [ 210.096850] invalid_op+0x1b/0x40 [ 210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth] [ 210.096892] RSP: 0018:ffff880094a0f970 EFLAGS: 00010296 [ 210.096898] RAX: 0000000000000000 RBX: ffff880107e170e8 RCX: ffff880107e17160 [ 210.096902] RDX: 000000000000002f RSI: ffff88013b80ed40 RDI: ffffffffa058b940 [ 210.096906] RBP: ffff88011b2b0578 R08: 00000000852f0ec9 R09: ffffffff81cfcf9b [ 210.096909] R10: 00000000d21bdad7 R11: 0000000000000001 R12: ffff8800967b0488 [ 210.096913] R13: ffff880107e17168 R14: 0000000000000068 R15: ffff8800949c0008 [ 210.096920] ? __sk_destruct+0x2c6/0x2d4 [ 210.096959] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.096969] ? __local_bh_enable_ip+0x43/0x5b [ 210.097004] ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth] [ 210.097039] ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth] [ 210.097075] ? l2cap_ertm_init+0x94e/0x94e [bluetooth] [ 210.097093] ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd] [ 210.097102] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097109] ? __accumulate_pelt_segments+0x24/0x33 [ 210.097115] ? __update_load_avg_se.isra.2+0x217/0x3a4 [ 210.097122] ? set_next_entity+0x7c3/0x12cd [ 210.097128] ? pick_next_entity+0x25e/0x26c [ 210.097135] ? pick_next_task_fair+0x2ca/0xc1a [ 210.097141] ? switch_mm_irqs_off+0x346/0xb4f [ 210.097147] ? __switch_to+0x769/0xbc4 [ 210.097153] ? compat_start_thread+0x66/0x66 [ 210.097188] ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth] [ 210.097195] ? finish_task_switch+0x392/0x431 [ 210.097228] ? hci_rx_work+0x154/0x487 [bluetooth] [ 210.097260] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097269] process_one_work+0x579/0x9e9 [ 210.097277] worker_thread+0x68f/0x804 [ 210.097285] kthread+0x31c/0x32b [ 210.097292] ? rescuer_thread+0x70c/0x70c [ 210.097299] ? kthread_create_on_node+0xa3/0xa3 [ 210.097306] ret_from_fork+0x35/0x40 [ 210.097314] Allocated by task 2040: [ 210.097323] kasan_kmalloc.part.1+0x51/0xc7 [ 210.097328] __kmalloc+0x17f/0x1b6 [ 210.097335] sk_prot_alloc+0xf2/0x1a3 [ 210.097340] sk_alloc+0x22/0x297 [ 210.097375] sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth] [ 210.097410] sco_connect_cfm+0x2d0/0x566 [bluetooth] [ 210.097443] hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth] [ 210.097476] hci_event_packet+0x85e/0x7de2 [bluetooth] [ 210.097507] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097512] process_one_work+0x579/0x9e9 [ 210.097517] worker_thread+0x68f/0x804 [ 210.097523] kthread+0x31c/0x32b [ 210.097529] ret_from_fork+0x35/0x40 [ 210.097533] Freed by task 2040: [ 210.097539] kasan_slab_free+0xb3/0x15e [ 210.097544] kfree+0x103/0x1a9 [ 210.097549] __sk_destruct+0x2c6/0x2d4 [ 210.097584] sco_conn_del.isra.1+0xba/0x10e [bluetooth] [ 210.097617] hci_event_packet+0xff5/0x7de2 [bluetooth] [ 210.097648] hci_rx_work+0x154/0x487 [bluetooth] [ 210.097653] process_one_work+0x579/0x9e9 [ 210.097658] worker_thread+0x68f/0x804 [ 210.097663] kthread+0x31c/0x32b [ 210.097670] ret_from_fork+0x35/0x40 [ 210.097676] The buggy address belongs to the object at ffff880107e170e8 which belongs to the cache kmalloc-1024 of size 1024 [ 210.097681] The buggy address is located 120 bytes inside of 1024-byte region [ffff880107e170e8, ffff880107e174e8) [ 210.097683] The buggy address belongs to the page: [ 210.097689] page:ffffea00041f8400 count:1 mapcount:0 mapping: (null) index:0xffff880107e15b68 compound_mapcount: 0 [ 210.110194] flags: 0x8000000000008100(slab|head) [ 210.115441] raw: 8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016 [ 210.115448] raw: ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000 [ 210.115451] page dumped because: kasan: bad access detected [ 210.115454] Memory state around the buggy address: [ 210.115460] ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 210.115465] ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb [ 210.115469] >ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115472] ^ [ 210.115477] ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115481] ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 210.115483] ================================================================== And finally when BT_DBG() and ftrace was enabled it showed: <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_close <...>-14979 [001] .... 186.104191: sco_sock_kill <-sco_sock_release <...>-14979 [001] .... 186.104192: sco_sock_kill: sk ef0497a0 state 9 <...>-14979 [001] .... 186.104193: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104246: sco_sock_kill <-sco_conn_del kworker/u9:2-792 [001] .... 186.104248: sco_sock_kill: sk ef0497a0 state 9 kworker/u9:2-792 [001] .... 186.104249: bt_sock_unlink <-sco_sock_kill kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct <-__sk_destruct kworker/u9:2-792 [001] .... 186.104250: sco_sock_destruct: sk ef0497a0 kworker/u9:2-792 [001] .... 186.104860: hci_conn_del <-hci_event_packet kworker/u9:2-792 [001] .... 186.104864: hci_conn_del: hci0 hcon ef0484c0 handle 266 Only in the failed case, sco_sock_kill() gets called with the same sock pointer two times. Add a check for SOCK_DEAD to avoid continue killing a socket which has already been killed. Signed-off-by:Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
- 06 Jul, 2018 14 commits
-
-
Jaganath Kanakkassery authored
This implements extended LE craete connection and enhanced LE conn complete event if the controller supports. For now it is as good as legacy LE connection and event as no new features in the extended connection is handled. < HCI Command: LE Extended Create Connection (0x08|0x0043) plen 26 Filter policy: White list is not used (0x00) Own address type: Public (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Initiating PHYs: 0x01 Entry 0: LE 1M Scan interval: 60.000 msec (0x0060) Scan window: 60.000 msec (0x0060) Min connection interval: 50.00 msec (0x0028) Max connection interval: 70.00 msec (0x0038) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Min connection length: 0.000 msec (0x0000) Max connection length: 0.000 msec (0x0000) > HCI Event: Command Status (0x0f) plen 4 LE Extended Create Connection (0x08|0x0043) ncmd 2 Status: Success (0x00) > HCI Event: LE Meta Event (0x3e) plen 31 LE Enhanced Connection Complete (0x0a) Status: Success (0x00) Handle: 3585 Role: Master (0x00) Peer address type: Random (0x01) Peer address: DB:7E:2E:1D:85:E8 (Static) Local resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Peer resolvable private address: 00:00:00:00:00:00 (Non-Resolvable) Connection interval: 67.50 msec (0x0036) Connection latency: 0 (0x0000) Supervision timeout: 420 msec (0x002a) Master clock accuracy: 0x00 @ MGMT Event: Device Connected (0x000b) plen 40 LE Address: DB:7E:2E:1D:85:E8 (Static) Flags: 0x00000000 Data length: 27 Name (complete): Designer Mouse Appearance: Mouse (0x03c2) Flags: 0x05 LE Limited Discoverable Mode BR/EDR Not Supported 16-bit Service UUIDs (complete): 1 entry Human Interface Device (0x1812) Signed-off-by:Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com> Signed-off-by:
-
Jaganath Kanakkassery authored
This is done so that the helpers can be used for extended conn implementation which will be done in subsequent patch. Signed-off-by:
-
Jaganath Kanakkassery authored
This patch enables Extended ADV report event if extended scanning is supported in the controller and process the same. The new features are not handled and for now its as good as legacy ADV report. > HCI Event: LE Meta Event (0x3e) plen 53 LE Extended Advertising Report (0x0d) Num reports: 1 Entry 0 Event type: 0x0013 Props: 0x0013 Connectable Scannable Use legacy advertising PDUs Data status: Complete Legacy PDU Type: ADV_IND (0x0013) Address type: Random (0x01) Address: DB:7E:2E:1A:85:E8 (Static) Primary PHY: LE 1M Secondary PHY: LE 1M SID: 0x00 TX power: 0 dBm RSSI: -90 dBm (0xa6) Periodic advertising invteral: 0.00 msec (0x0000) Direct address type: Public (0x00) Direct address: 00:00:00:00:00:00 (OUI 00-00-00) Data length: 0x1b 0f 09 44 65 73 69 67 6e 65 72 20 4d 6f 75 73 65 ..Designer Mouse 03 19 c2 03 02 01 05 03 03 12 18 ........... Signed-off-by: -
Jaganath Kanakkassery authored
This implements Set extended scan param and set extended scan enable commands and use it for start LE scan based on controller support. The new features added in these commands are setting of new PHY for scanning and setting of scan duration. Both features are disabled for now, meaning only 1M PHY is set and scan duration is set to 0 which means that scanning will be done untill scan disable is called. < HCI Command: LE Set Extended Scan Parameters (0x08|0x0041) plen 8 Own address type: Random (0x01) Filter policy: Accept all advertisement (0x00) PHYs: 0x01 Entry 0: LE 1M Type: Active (0x01) Interval: 11.250 msec (0x0012) Window: 11.250 msec (0x0012) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Parameters (0x08|0x0041) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Extended Scan Enable (0x08|0x0042) plen 6 Extended scan: Enabled (0x01) Filter duplicates: Enabled (0x01) Duration: 0 msec (0x0000) Period: 0.00 sec (0x0000) > HCI Event: Command Complete (0x0e) plen 4 LE Set Extended Scan Enable (0x08|0x0042) ncmd 2 Status: Success (0x00) Signed-off-by: -
Jaganath Kanakkassery authored
Introduce a helper hci_req_start_scan() which starts an LE scan and call it from passive_Scan() and active_scan(). There is not functionality change in this patch. This is basically done to enable extended scanning if the controller supports which will be done in the subsequent patch Signed-off-by:
-
Corentin Labbe authored
Nothing in tree use this header which seems a remains of a staging driver. This patch remove it. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Reviewed-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
-
Ankit Navik authored
Check for Resolv list supported by controller. So check the supported commmand first before issuing this command i.e.,HCI_OP_LE_CLEAR_RESOLV_LIST Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 28.919131 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 28.920016 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 28.920164 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 28.920873 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 28.921109 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 28.922016 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear Resolving... (0x08|0x0029) plen 0 #61 [hci0] 28.922166 > HCI Event: Command Complete (0x0e) plen 4 #62 [hci0] 28.922872 LE Clear Resolving List (0x08|0x0029) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #63 [hci0] 28.923117 > HCI Event: Command Complete (0x0e) plen 12 #64 [hci0] 28.924030 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by:Ankit Navik <ankit.p.navik@intel.com> Signed-off-by:
-
Ankit Navik authored
When the controller supports the Read LE Resolv List size feature, the maximum list size are read and now stored. Before patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 17.979791 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 17.980629 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 17.980786 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 17.981627 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #59 [hci0] 17.981786 > HCI Event: Command Complete (0x0e) plen 12 #60 [hci0] 17.982636 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 After patch: < HCI Command: LE Read White List... (0x08|0x000f) plen 0 #55 [hci0] 13.338168 > HCI Event: Command Complete (0x0e) plen 5 #56 [hci0] 13.338842 LE Read White List Size (0x08|0x000f) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Clear White List (0x08|0x0010) plen 0 #57 [hci0] 13.339029 > HCI Event: Command Complete (0x0e) plen 4 #58 [hci0] 13.339939 LE Clear White List (0x08|0x0010) ncmd 1 Status: Success (0x00) < HCI Command: LE Read Resolving L.. (0x08|0x002a) plen 0 #59 [hci0] 13.340152 > HCI Event: Command Complete (0x0e) plen 5 #60 [hci0] 13.340952 LE Read Resolving List Size (0x08|0x002a) ncmd 1 Status: Success (0x00) Size: 25 < HCI Command: LE Read Maximum Dat.. (0x08|0x002f) plen 0 #61 [hci0] 13.341180 > HCI Event: Command Complete (0x0e) plen 12 #62 [hci0] 13.341898 LE Read Maximum Data Length (0x08|0x002f) ncmd 1 Status: Success (0x00) Max TX octets: 251 Max TX time: 17040 Max RX octets: 251 Max RX time: 17040 Signed-off-by: -
Sebastian Andrzej Siewior authored
The USB completion callback does not disable interrupts while acquiring the ->lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave variant of the locking primitives. Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: linux-bluetooth@vger.kernel.org Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Jian-Hong Pan authored
Without this patch we cannot turn on the Bluethooth adapter on HP 14-bs007la. T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b009 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
-
Michael Scott authored
After decompression of 6lowpan socket data, an IPv6 header is inserted before the existing socket payload. After this, we reset the network_header value of the skb to account for the difference in payload size from prior to decompression + the addition of the IPv6 header. However, we fail to reset the mac_header value. Leaving the mac_header value untouched here, can cause a calculation error in net/packet/af_packet.c packet_rcv() function when an AF_PACKET socket is opened in SOCK_RAW mode for use on a 6lowpan interface. On line 2088, the data pointer is moved backward by the value returned from skb_mac_header(). If skb->data is adjusted so that it is before the skb->head pointer (which can happen when an old value of mac_header is left in place) the kernel generates a panic in net/core/skbuff.c line 1717. This panic can be generated by BLE 6lowpan interfaces (such as bt0) and 802.15.4 interfaces (such as lowpan0) as they both use the same 6lowpan sources for compression and decompression. Signed-off-by:
Michael Scott <michael@opensourcefoundries.com> Acked-by:
Alexander Aring <aring@mojatatu.com> Acked-by:
Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by:
-
David S. Miller authored
Edward Cree says: ==================== IP listification follow-ups While working on IPv6 list processing, I found another bug in the IPv4 version. So this patch series has that fix, and the IPv6 version with both fixes incorporated. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Edward Cree authored
Essentially the same as the ipv4 equivalents. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
If we have an L3 master device, l3mdev_ip_rcv() will steal the skb, but we were returning NET_RX_SUCCESS from ip_rcv_finish_core() which meant that ip_list_rcv_finish() would keep it on the list. Instead let's move the l3mdev_ip_rcv() call into the caller, so that our response to a steal can be different in the single packet path (return NET_RX_SUCCESS) and the list path (forget this packet and continue). Fixes: 5fa12739 ("net: ipv4: listify ip_rcv_finish") Signed-off-by:
-
- 05 Jul, 2018 19 commits
-
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Ganesh Goudar authored
Use 'chip_ver' rather than 'chip' to check if the card is T5. Fixes: e8d45292 ("cxgb4: clean up init_one") Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Colin Ian King authored
Variables adv and lpa are being assigned but are never used hence they are redundant and can be removed. Also remove the unncessary mii_reads too. Cleans up clang warnings: warning: variable 'lpa' set but not used [-Wunused-but-set-variable] warning: variable 'adv' set but not used [-Wunused-but-set-variable] Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
David S. Miller authored
Geert Uytterhoeven says: ==================== net: ethernet: Miscellaneous Kconfig and Makefile cleanups This patch series contains a few Kconfig and Makefile cleanups w.r.t. Ethernet vendors. ==================== Signed-off-by: -
Geert Uytterhoeven authored
Both SFC and SFC_FALCON depend on NET_VENDOR_SOLARFLARE, hence use the latter to decide whether to descend into the sfc subdirectory. Move the rule to descend into sfc/falcon to the sfc subdirectory. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
-
Geert Uytterhoeven authored
The vendor guard Kconfig symbols for Cadence and Packet Engines use a "NET_" prefix, while all other vendor guards use a "NET_VENDOR_" prefix. Hence make them consistent with the rest, and add the missing trailing "S" for Packet Engines while at it. As these options don't directly affect the kernel build, and default to "y", this change has no impact on kernels built with existing (def)configs. Signed-off-by:
-
Geert Uytterhoeven authored
Enabling NET_VENDOR_* Kconfig options does not directly affect the kernel build. Hence NET_VENDOR_AURORA should default to yes, like other NET_VENDOR_* options. Signed-off-by:
-
Colin Ian King authored
Variables consumer, cmd_desc, end_cnt and no_of_desc are being assigned but are never used hence they are redundant and can be removed. Cleans up clang warnings: warning: variable 'consumer' set but not used [-Wunused-but-set-variable] warning: variable 'cmd_desc' set but not used [-Wunused-but-set-variable] warning: variable 'end_cnt' set but not used [-Wunused-but-set-variable] warning: variable 'no_of_desc' set but not used [-Wunused-but-set-variable] Signed-off-by:
-
David S. Miller authored
Moshe Shemesh says: ==================== Add configuration parameters support Add configuration parameters setting through devlink. Each device registers supported configuration parameters table. Each parameter can be either generic or driver specific. The user can retrieve data on these parameters by "devlink param show" command and can set new value to a parameter by "devlink param set" command. The parameters can be set in different configuration modes: runtime - set while driver is running, no reset required. driverinit - applied while driver initializes, requires restart driver by devlink reload command. permanent - written to device's non-volatile memory, hard reset required. The patches at the end of the patchset introduce few params that are using the introduced infrastructure on mlx4 and bnxt. Command examples and output: pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value true cmode driverinit value true name max_macs type generic values: cmode driverinit value 128 name enable_64b_cqe_eqe type driver-specific values: cmode driverinit value true name enable_4k_uar type driver-specific values: cmode driverinit value false pci/0000:81:00.0: name internal_error_reset type generic values: cmode runtime value false cmode driverinit value true ==================== Signed-off-by: -
Vasundhara Volam authored
Create initial devlink parameters table for bnxt_en. Table consists of a permanent generic parameter. enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
enable_sriov - Enables Single-Root Input/Output Virtualization(SR-IOV) characteristic of the device. Reviewed-by:
-
Moshe Shemesh authored
Add mlx4_devlink_reload() to support devlink reload operation. Add mlx4_devlink_param_load_driverinit_values() to load values which were set using driverinit configuration mode. Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
Create initial parameters table for mlx4. The table consists of two generic parameters and two driver-specific parameters. Generic: internal_err_reset - Enable reset device on internal errors. This parameter can be configured on mlx4 either on runtime or during driver initialization. max_macs - Max number of MACs per ETH port. For mlx4 this parameter value range is between 1 and 128. This parameter can be configured on mlx4 only during driver initialization. Driver specific: enable_64b_cqe_eqe - Enable 64 byte CQEs/EQEs when the FW supports it. This parameter can be configured on mlx4 only during driver initialization. enable_4k_uar - Enable using 4K UAR. This parameter can be configured on mlx4 only during driver initialization. Register the parameters table on mlx4_init_one() and unregister on mlx4_remove_one(). Signed-off-by:
-
Moshe Shemesh authored
Add 2 first generic parameters to devlink configuration parameters set: internal_err_reset - When set enables reset device on internal errors. max_macs - max number of MACs per ETH port. Signed-off-by:
-
Moshe Shemesh authored
Add devlink_param_notify() function to support devlink param notifications. Add notification call to devlink param set, register and unregister functions. Add devlink_param_value_changed() function to enable the driver notify devlink on value change. Driver should use this function after value was changed on any configuration mode part to driverinit. Signed-off-by:
-
Moshe Shemesh authored
"driverinit" configuration mode value is held by devlink to enable the driver query the value after reload. Two additional functions added to help the driver get/set the value from/to devlink: devlink_param_driverinit_value_set() and devlink_param_driverinit_value_get(). Signed-off-by:
-
Moshe Shemesh authored
Add param set command to set value for a parameter. Value can be set to any of the supported configuration modes. Signed-off-by:
-
