Skip to content

L
linux
Switch branch/tag
  1. 30 Apr, 2013 28 commits
  3. 29 Apr, 2013 12 commits
    • Li Zefan's avatar
      memcg: take reference before releasing rcu_read_lock · ca0dde97
      Li Zefan authored 
      The memcg is not referenced, so it can be destroyed at anytime right
after we exit rcu read section, so it's not safe to access it.

To fix this, we call css_tryget() to get a reference while we're still
in rcu read section.

This also removes a bogus comment above __memcg_create_cache_enqueue().
Signed-off-by: default avatarLi Zefan <lizefan@huawei.com>
Acked-by: default avatarGlauber Costa <glommer@parallels.com>
Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
Acked-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ca0dde97
    • Yasuaki Ishimatsu's avatar
      mem hotunplug: fix kfree() of bootmem memory · ebff7d8f
      Yasuaki Ishimatsu authored 
      When hot removing memory presented at boot time, following messages are shown:

  kernel BUG at mm/slub.c:3409!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: ebtable_nat ebtables xt_CHECKSUM iptable_mangle bridge stp llc ipmi_devintf ipmi_msghandler sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc vfat fat dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel ghash_clmulni_intel microcode pcspkr sg i2c_i801 lpc_ich mfd_core igb i2c_algo_bit i2c_core e1000e ptp pps_core tpm_infineon ioatdma dca sr_mod cdrom sd_mod crc_t10dif usb_storage megaraid_sas lpfc scsi_transport_fc scsi_tgt scsi_mod
  CPU 0
  Pid: 5091, comm: kworker/0:2 Tainted: G        W    3.9.0-rc6+ #15
  RIP: kfree+0x232/0x240
  Process kworker/0:2 (pid: 5091, threadinfo ffff88084678c000, task ffff88083928ca80)
  Call Trace:
    __release_region+0xd4/0xe0
    __remove_pages+0x52/0x110
    arch_remove_memory+0x89/0xd0
    remove_memory+0xc4/0x100
    acpi_memory_device_remove+0x6d/0xb1
    acpi_device_remove+0x89/0xab
    __device_release_driver+0x7c/0xf0
    device_release_driver+0x2f/0x50
    acpi_bus_device_detach+0x6c/0x70
    acpi_ns_walk_namespace+0x11a/0x250
    acpi_walk_namespace+0xee/0x137
    acpi_bus_trim+0x33/0x7a
    acpi_bus_hot_remove_device+0xc4/0x1a1
    acpi_os_execute_deferred+0x27/0x34
    process_one_work+0x1f7/0x590
    worker_thread+0x11a/0x370
    kthread+0xee/0x100
    ret_from_fork+0x7c/0xb0
  RIP  [<ffffffff811c41d2>] kfree+0x232/0x240
   RSP <ffff88084678d968>

The reason why the messages are shown is to release a resource
structure, allocated by bootmem, by kfree().  So when we release a
resource structure, we should check whether it is allocated by bootmem
or not.

But even if we know a resource structure is allocated by bootmem, we
cannot release it since SLxB cannot treat it.  So for reusing a resource
structure, this patch remembers it by using bootmem_resource as follows:

When releasing a resource structure by free_resource(), free_resource()
checks whether the resource structure is allocated by bootmem or not.
If it is allocated by bootmem, free_resource() adds it to
bootmem_resource.  If it is not allocated by bootmem, free_resource()
release it by kfree().

And when getting a new resource structure by get_resource(),
get_resource() checks whether bootmem_resource has released resource
structures or not.  If there is a released resource structure,
get_resource() returns it.  If there is not a releaed resource
structure, get_resource() returns new resource structure allocated by
kzalloc().

[akpm@linux-foundation.org: s/get_resource/alloc_resource/]
Signed-off-by: default avatarYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Reviewed-by: default avatarToshi Kani <toshi.kani@hp.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ram Pai <linuxram@us.ibm.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ebff7d8f
    • Vinayak Menon's avatar
      mmKconfig: add an option to disable bounce · 9ca24e2e
      Vinayak Menon authored 
      There are times when HIGHMEM is enabled, but we don't prefer
CONFIG_BOUNCE to be enabled.  CONFIG_BOUNCE can reduce the block device
throughput, and this is not ideal for machines where we don't gain much
by enabling it.  So provide an option to deselect CONFIG_BOUNCE.  The
observation was made while measuring eMMC throughput using iozone on an
ARM device with 1GB RAM.
Signed-off-by: default avatarVinayak Menon <vinayakm.list@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9ca24e2e
    • Joonsoo Kim's avatar
      mm, nobootmem: do memset() after memblock_reserve() · b476e295
      Joonsoo Kim authored 
      Currently, we do memset() before reserving the area.  This may not cause
any problem, but it is somewhat weird.  So change execution order.
Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b476e295
    • Joonsoo Kim's avatar
      mm, nobootmem: clean-up of free_low_memory_core_early() · b4def350
      Joonsoo Kim authored 
      Remove unused argument and make function static, because there is no user
outside of nobootmem.c
Signed-off-by: default avatarJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Cc: Jiang Liu <liuj97@gmail.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b4def350
    • majianpeng's avatar
      fs/buffer.c: remove unnecessary init operation after allocating buffer_head. · e7600409
      majianpeng authored 
      bh allocation uses kmem_cache_zalloc() so we needn't call
'init_buffer(bh, NULL, NULL)' and perform other set-zero-operations.
Signed-off-by: default avatarJianpeng Ma <majianpeng@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e7600409
    • Yasuaki Ishimatsu's avatar
      numa, cpu hotplug: change links of CPU and node when changing node number by onlining CPU · 34640468
      Yasuaki Ishimatsu authored 
      When booting x86 system contains memoryless node, node numbers of CPUs
on memoryless node were changed to nearest online node number by
init_cpu_to_node() because the node is not online.

In my system, node numbers of cpu#30-44 and 75-89 were changed from 2 to
0 as follows:

  $ numactl --hardware
  available: 2 nodes (0-1)
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 30 31 32 33 34 35 36 37 38 39 40
  41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 75 76 77 78 79 80 81 82
  83 84 85 86 87 88 89
  node 0 size: 32394 MB
  node 0 free: 27898 MB
  node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66
  67 68 69 70 71 72 73 74
  node 1 size: 32768 MB
  node 1 free: 30335 MB

If we hot add memory to memoryless node and offine/online all CPUs on
the node, node numbers of these CPUs are changed to correct node numbers
by srat_detect_node() because the node become online.

In this case, node numbers of cpu#30-44 and 75-89 were changed from 0 to
2 in my system as follows:

  $ numactl --hardware
  available: 3 nodes (0-2)
  node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 45 46 47 48 49 50 51 52 53 54 55
  56 57 58 59
  node 0 size: 32394 MB
  node 0 free: 27218 MB
  node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66
  67 68 69 70 71 72 73 74
  node 1 size: 32768 MB
  node 1 free: 30014 MB
  node 2 cpus: 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 75 76 77 78 79 80 81
  82 83 84 85 86 87 88 89
  node 2 size: 16384 MB
  node 2 free: 16384 MB

But "cpu to node" and "node to cpu" links were not changed as follows:

  $ ls /sys/devices/system/cpu/cpu30/|grep node
  node0
  $ ls /sys/devices/system/node/node0/|grep cpu30
  cpu30

"numactl --hardware" shows that cpu30 belongs to node 2.  But sysfs
links does not change.

This patch changes "cpu to node" and "node to cpu" links when node
number changed by onlining CPU.
Signed-off-by: default avatarYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      34640468
    • Randy Dunlap's avatar
      mm: fix memory_hotplug.c printk format warning · 349daa0f
      Randy Dunlap authored 
      PFN_PHYS() is a phys_addr_t, which can be u32 or u64.
Fix the build warning when phys_addr_t is u32.

  mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 2 has type 'unsigned int' [-Wformat]:  => 1685:3
  mm/memory_hotplug.c: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'unsigned int' [-Wformat]:  => 1685:3
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Reported-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      349daa0f
    • Mel Gorman's avatar
      mm: swap: mark swap pages writeback before queueing for direct IO · 0cdc444a
      Mel Gorman authored 
      As pointed out by Andrew Morton, the swap-over-NFS writeback is not
setting PageWriteback before it is queued for direct IO.  While swap
pages do not participate in BDI or process dirty accounting and the IO
is synchronous, the writeback bit is still required and not setting it
in this case was an oversight.  swapoff depends on the page writeback to
synchronoise all pending writes on a swap page before it is reused.
Swapcache freeing and reuse depend on checking the PageWriteback under
lock to ensure the page is safe to reuse.

Direct IO handlers and the direct IO handler for NFS do not deal with
PageWriteback as they are synchronous writes.  In the case of NFS, it
schedules pages (or a page in the case of swap) for IO and then waits
synchronously for IO to complete in nfs_direct_write().  It is
recognised that this is a slowdown from normal swap handling which is
asynchronous and uses a completion handler.  Shoving PageWriteback
handling down into direct IO handlers looks like a bad fit to handle the
swap case although it may have to be dealt with some day if swap is
converted to use direct IO in general and bmap is finally done away
with.  At that point it will be necessary to refit asynchronous direct
IO with completion handlers onto the swap subsystem.

As swapcache currently depends on PageWriteback to protect against
races, this patch sets PageWriteback under the page lock before queueing
it for direct IO.  It is cleared when the direct IO handler returns.  IO
errors are treated similarly to the direct-to-bio case except PageError
is not set as in the case of swap-over-NFS, it is likely to be a
transient error.

It was asked what prevents such a page being reclaimed in parallel.
With this patch applied, such a page will now be skipped (most of the
time) or blocked until the writeback completes.  Reclaim checks
PageWriteback under the page lock before calling try_to_free_swap and
the page lock should prevent the page being requeued for IO before it is
freed.

This and Jerome's related patch should considered for -stable as far
back as 3.6 when swap-over-NFS was introduced.

[akpm@linux-foundation.org: use pr_err_ratelimited()]
[akpm@linux-foundation.org: remove hopefully-unneeded cast in printk]
Signed-off-by: default avatarMel Gorman <mgorman@suse.de>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0cdc444a
    • Jerome Marchand's avatar
      swap: redirty page if page write fails on swap file · 2d30d31e
      Jerome Marchand authored 
      Since commit 62c230bc ("mm: add support for a filesystem to activate
swap files and use direct_IO for writing swap pages"), swap_writepage()
calls direct_IO on swap files.  However, in that case the page isn't
redirtied if I/O fails, and is therefore handled afterwards as if it has
been successfully written to the swap file, leading to memory corruption
when the page is eventually swapped back in.

This patch sets the page dirty when direct_IO() fails.  It fixes a
memory corruption that happened while using swap-over-NFS.
Signed-off-by: default avatarJerome Marchand <jmarchan@redhat.com>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Acked-by: default avatarMel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>	[3.6+]
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      2d30d31e
    • David Rientjes's avatar
      mm, memcg: give exiting processes access to memory reserves · 465adcf1
      David Rientjes authored 
      A memcg may livelock when oom if the process that grabs the hierarchy's
oom lock is never the first process with PF_EXITING set in the memcg's
task iteration.

The oom killer, both global and memcg, will defer if it finds an
eligible process that is in the process of exiting and it is not being
ptraced.  The idea is to allow it to exit without using memory reserves
before needlessly killing another process.

This normally works fine except in the memcg case with a large number of
threads attached to the oom memcg.  In this case, the memcg oom killer
only gets called for the process that grabs the hierarchy's oom lock;
all others end up blocked on the memcg's oom waitqueue.  Thus, if the
process that grabs the hierarchy's oom lock is never the first
PF_EXITING process in the memcg's task iteration, the oom killer is
constantly deferred without anything making progress.

The fix is to give PF_EXITING processes access to memory reserves so
that we've marked them as oom killed without any iteration.  This allows
__mem_cgroup_try_charge() to succeed so that the process may exit.  This
makes the memcg oom killer exemption for TIF_MEMDIE tasks, now
immediately granted for processes with pending SIGKILLs and those in the
exit path, to be equivalent to what is done for the global oom killer.
Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
Acked-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      465adcf1
    • Kirill A. Shutemov's avatar
      thp: fix huge zero page logic for page with pfn == 0 · 5918d10a
      Kirill A. Shutemov authored 
      Current implementation of huge zero page uses pfn value 0 to indicate
that the page hasn't allocated yet.  It assumes that buddy page
allocator can't return page with pfn == 0.

Let's rework the code to store 'struct page *' of huge zero page, not
its pfn.  This way we can avoid the weak assumption.

[akpm@linux-foundation.org: fix sparse warning]
Signed-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: default avatarMinchan Kim <minchan@kernel.org>
Acked-by: default avatarMinchan Kim <minchan@kernel.org>
Reviewed-by: default avatarAndrea Arcangeli <aarcange@redhat.com>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5918d10a
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7