- 03 Feb, 2023 15 commits
-
-
Armin Wolf authored
Until now, the dell-wmi-ddv driver needs to be manually patched and compiled to test compatibility with unknown DDV WMI interface versions. Add a module param to allow users to force loading even when a unknown interface version was detected. Since this might cause various unwanted side effects, the module param is marked as unsafe. Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20230126194021.381092-5-W_Armin@gmx.deReviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Armin Wolf authored
When the ACPI WMI interface returns a valid ACPI object which has the wrong type, then ENOMSG instead of EIO should be returned, since the WMI method was still successfully evaluated. Signed-off-by:
-
Armin Wolf authored
In several cases, the DDV WMI interface can return buffers with a length of zero. Return -ENODATA in such a case for proper error handling. Also replace some -EIO errors with more specialized ones. Signed-off-by:
-
Armin Wolf authored
While trying to solve a bugreport on bugzilla, i learned that some devices (for example the Dell XPS 17 9710) provide a more recent DDV WMI interface (version 3). Since the new interface version just adds an additional method, no code changes are necessary apart from whitelisting the version. Signed-off-by:
-
Srinivas Pandruvada authored
This release adds following change: - Minor fixes for coverity static analysis - Don't read cpufreq on offline CPUs - SST turbo-freq enable on auto mode when user disables SMT from kernel command line - Fix uncore frequency display - Set uncore frequency max/min limits on perf level change Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Srinivas Pandruvada authored
When perf level is changed, uncore limits can change. Set the uncore limits via Linux uncore sysfs, when user changes perf level with -o option. Signed-off-by:
-
Zhang Rui authored
Need memory frequency quirk as Sapphire Rapids in Emerald Rapids. So add Emerald Rapids CPU model check in is_spr_platform(). Signed-off-by:
Zhang Rui <rui.zhang@intel.com> [srinivas.pandruvada@linux.intel.com: Subject, changelog and code edits] Signed-off-by:
-
Srinivas Pandruvada authored
Uncore P1 is not uncore minmum frequency. This is uncore base frequency. Correct display from uncore-frequency-min(MHz) to uncore-frequency-base(Mhz). To get uncore min frequency use mailbox command CONFIG_TDP_GET_RATIO_INFO. Use this mailbox to get uncore frequency limits when present. Signed-off-by:
-
Srinivas Pandruvada authored
When SMT is disabled from kernel command line, sibling CPUs still appears in the sysfs as offline CPUs. This is a problem when turbo-freq is enabled in auto mode. They are still assigned to CLOS value of 3 as they are still in the present CPU list. But they are not in the sibling list of a CPU. When the CPU is a high priority CPU, because of sibling it will be still set to CLOS to 3 as CLOS is assigned at core level not at CPU level. So, avoid setting CLOS 3 to offline CPU. Signed-off-by:
-
Srinivas Pandruvada authored
Due to some recent kernel changes, reading cpufreq attributes like scaling_max_freq on offline CPUs returns error. So avoid reading cpufreq attributes on offline CPUs. Signed-off-by:
-
Zhang Rui authored
strlen() and strtok() takes null-termimated strings as input. Make sure these strings are null-terminated before using them. Signed-off-by:
-
Zhang Rui authored
Remove the duplicate dup() invocation. Signed-off-by:
-
Zhang Rui authored
Add handling for open() failure case to make sure a valid file descriptor is passed to dup(). Signed-off-by:
-
Zhang Rui authored
variable 'non_block' is always 0, thus remove the variable and the handling for "non_block != 0" case. Signed-off-by:
-
Zhang Rui authored
struct isst_id *id is a pointer, comparing it with less than zero is wrong. The check is there to make sure the id->pkg and id->die is set to -1, when it is illegal or unavailable. Here comparing with MAX_PACKAGE_COUNT and MAX_DIE_PER_PACKAGE is sufficient. Hence remove the wrong check. Signed-off-by:
-
- 02 Feb, 2023 18 commits
-
-
Rishit Bansal authored
Follow up from https://lore.kernel.org/all/20230120221214.24426-1-rishitbansal0@gmail.com/ There is a "Win-Lock" key on HP Omen Laptops which supports enabling and disabling the Windows key, which trigger commands 0x21a4 and 0x121a4 respectively. Currently the hp-wmi driver throws warnings for this event. These can be ignored using KE_IGNORE as the functionality is handled by the keyboard firmware itself. Signed-off-by:
Rishit Bansal <rishitbansal0@gmail.com> Link: https://lore.kernel.org/r/20230123214150.62597-1-rishitbansal0@gmail.comReviewed-by:
-
Hans de Goede authored
The apple_gmux code no longer uses any symbols from the ACPI_VIDEO code, so that dependency can be dropped. Signed-off-by:
-
Andy Shevchenko authored
The acpi_evaluate_dsm_typed() provides a way to check the type of the object evaluated by _DSM call. Use it instead of open coded variant. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230119180904.78446-1-andriy.shevchenko@linux.intel.comReviewed-by:
-
Andy Shevchenko authored
The acpi_evaluate_dsm_typed() provides a way to check the type of the object evaluated by _DSM call. Use it instead of open coded variant. Signed-off-by:
Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20230118095440.41634-1-andriy.shevchenko@linux.intel.comReviewed-by:
-
Andy Shevchenko authored
The acpi_evaluate_dsm_typed() provides a way to check the type of the object evaluated by _DSM call. Use it instead of open coded variant. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20230118093823.39679-1-andriy.shevchenko@linux.intel.comReviewed-by:
-
Maximilian Luz authored
We currently have a struct ssam_request_sync and a function ssam_request_sync(). While this is valid C, there are some downsides to it. One of these is that current Sphinx versions (>= 3.0) cannot disambiguate between the two (see disucssion and pull request linked below). It instead emits a "WARNING: Duplicate C declaration" and links for the struct and function in the resulting documentation link to the same entry (i.e. both to either function or struct documentation) instead of their respective own entries. While we could just ignore that and wait for a fix, there's also a point to be made that the current naming can be somewhat confusing when searching (e.g. via grep) or trying to understand the levels of abstraction at play: We currently have struct ssam_request_sync and associated functions ssam_request_sync_[alloc|free|init|wait|...]() operating on this struct. However, function ssam_request_sync() is one abstraction level above this. Similarly, ssam_request_sync_with_buffer() is not a function operating on struct ssam_request_sync, but rather a sibling to ssam_request_sync(), both using the struct under the hood. Therefore, rename the top level request functions: ssam_request_sync() -> ssam_request_do_sync() ssam_request_sync_with_buffer() -> ssam_request_do_sync_with_buffer() ssam_request_sync_onstack() -> ssam_request_do_sync_onstack() Link: https://lore.kernel.org/all/085e0ada65c11da9303d07e70c510dc45f21315b.1656756450.git.mchehab@kernel.org/ Link: https://github.com/sphinx-doc/sphinx/pull/8313Signed-off-by:
-
Maximilian Luz authored
The target ID of the base hub is currently set to KIP (keyboard/ peripherals). However, even though it manages such devices with the KIP target ID, the base hub itself is actually accessed via the SAM target ID. So set it accordingly. Note that the target ID of the hub can be chosen arbitrarily and does not directly correspond to any physical or virtual component of the EC. This change is only a code improvement intended for consistency and clarity, it does not fix an actual bug. Signed-off-by:
-
Maximilian Luz authored
Similar to the target category (TC), the target ID (TID) can be one value out of a small number of choices, given in enum ssam_ssh_tid. In the device ID macros, SSAM_SDEV() and SSAM_VDEV() we already use text expansion to, both, remove some textual clutter for the target category values and enforce that the value belongs to the known set. Now that we know the names for the target IDs, use the same trick for them as well. Also rename the SSAM_ANY_x macros to SSAM_SSH_x_ANY to better fit in. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20221202223327.690880-9-luzmaximilian@gmail.comReviewed-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Instead of hard-coding the target ID, use the respective enum ssam_ssh_tid value. Signed-off-by:
-
Maximilian Luz authored
Add command source and target IDs to trace events. Tracing support for the Surface Aggregator driver was originally implemented at a time when only two peers were known: Host and SAM. We now know that there are at least five, with three actively being used (Host, SAM, KIP; four with Debug if you want to count manually enabling that interface). So it makes sense to also explicitly name the peers involved when tracing. Signed-off-by:
-
Maximilian Luz authored
The `tid_in` and `tid_out` fields of the serial hub protocol command struct (struct ssh_command) are actually source and target IDs, indicating the peer from which the message originated and the peer for which it is intended. Change the naming of those fields accordingly and improve the protocol documentation. Additionally, introduce an enum containing all currently known peers, i.e. targets and sources. Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221213162359.651529-4-u.kleine-koenig@pengutronix.deReviewed-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
-
Uwe Kleine-König authored
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by:
Peter Kaestle <peter@piie.net> Link: https://lore.kernel.org/r/20221213162359.651529-2-u.kleine-koenig@pengutronix.deReviewed-by:
-
Hans de Goede authored
Add a DMI match for the CWI501 version of the Chuwi Vi8 tablet, pointing to the same chuwi_vi8_data as the existing CWI506 version DMI match. Signed-off-by:
-
- 30 Jan, 2023 7 commits
-
-
Hans de Goede authored
Reading the thinklight LED brightnes while the LED is on returns 255 (LED_FULL) but we advertise a max_brightness of 1, so this should be 1 (LED_ON). Fixes: db5e2a4c ("platform/x86: thinkpad_acpi: Fix max_brightness of thinklight") Signed-off-by:
-
Arnd Bergmann authored
Using the serio subsystem now requires the code to be reachable: x86_64-linux-ld: drivers/platform/x86/amd/pmc.o: in function `amd_pmc_suspend_handler': pmc.c:(.text+0x86c): undefined reference to `serio_bus' Add the usual dependency: as other users of serio use 'select' rather than 'depends on', use the same here. Fixes: 8e60615e ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230127093950.2368575-1-arnd@kernel.orgReviewed-by:
-
Hans de Goede authored
As soon as the first handler or sysfs file is registered the mutex may get used. Move the initialization to before any handler registration / sysfs file creation. Likewise move the destruction of the mutex to after all the de-initialization is done. Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer") Signed-off-by:
-
Shyam Sundar S K authored
Every power mode of static power slider has its own AC and DC power settings. When the power source changes from AC to DC, corresponding DC thermals were not updated from PMF config store and this leads the system to always run on AC power settings. Fix it by registering with power_supply notifier and apply DC settings upon getting notified by the power_supply handler. Fixes: da5ce22d ("platform/x86/amd/pmf: Add support for PMF core layer") Suggested-by:
Patil Rajesh Reddy <Patil.Reddy@amd.com> Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20230125095936.3292883-6-Shyam-sundar.S-k@amd.comReviewed-by:
-
Shyam Sundar S K authored
By design PMF static slider will be set to BALANCED during init, but updating to corresponding thermal values from the PMF config store was missed, leading to improper settings getting propagated to PMFW. Fixes: 4c71ae41 ("platform/x86/amd/pmf: Add support SPS PMF feature") Suggested-by:
-
Shyam Sundar S K authored
Auto-mode thermal limits should be updated only after receiving the AMT event. But due to a bug in the older commit, these settings were getting applied during the auto-mode init. Fix this by removing amd_pmf_set_automode() during auto-mode initialization. Fixes: 3f5571d9 ("platform/x86/amd/pmf: Add support for Auto mode feature") Suggested-by:
-
Shyam Sundar S K authored
Add helper routine to check if the current platform profile is balanced mode and remove duplicate code occurrences. Signed-off-by:
-
