My commit 26178ec1 ("x86: mm: consolidate VM_FAULT_RETRY handling")
had a really stupid typo: the FAULT_FLAG_USER bit is in the 'flags'
variable, not the 'fault' variable. Duh,

The one silver lining in this is that Dave finding this at least
confirms that trinity actually triggers this special path easily, in a
way normal use does not.
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull VFIO updates from Alex Williamson:
 - s390 support (Frank Blaschka)
 - Enable iommu-type1 for ARM SMMU (Will Deacon)

* tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio:
  drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMU
  vfio: make vfio run on s390

Pull virtio updates from Rusty Russell:
 "A balloon enhancement, and a minor race-on-module-unload theoretical
  bug which doesn't merit cc: stable.

  All the exciting stuff went via MST this cycle"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_balloon: free some memory from balloon on OOM
  virtio_balloon: return the amount of freed memory from leak_balloon()
  virtio_blk: fix race at module removal
  virtio: Fix comment typo 'CONFIG_S_FAILED'

Pull thermal management update from Zhang Rui:
 "Summary:

   - of-thermal extension to allow drivers to register and use its
     functionality in a better way, without exploiting thermal core.
     From Lukasz Majewski.

   - Fix a bug in intel_soc_dts_thermal driver which calls a sleep
     function in interrupt handler.  From Maurice Petallo.

   - add a thermal UAPI header file for exporting the thermal generic
     netlink information to user-space.  From Florian Fainelli.

   - First round of refactoring in Exynos driver.  Bartlomiej and Lukasz
     are attempting to make it lean and easier to understand.

   - New thermal driver for Rockchip (rk3288), with support for DT
     thermal.  From Caesar Wang.

   - New thermal driver for Nvidia, Tegra124 SOCTHERM driver, with
     support for DT thermal.  From Mikko Perttunen.

   - New cooling device, based on common clock framework.  From Eduardo
     Valentin.

   - a couple of small fixes in thermal core framework.  From Srinivas
     Pandruvada, Javi Merino, Luis Henriques.

   - Dropping Armada A375-Z1 SoC thermal support as the chip is not in
     the market, armada folks decided to drop its support.

   - a couple of small fixes and cleanups in int340x thermal driver"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (58 commits)
  thermal: provide an UAPI header file
  Thermal/int340x: Clear the error value of the last acpi_bus_get_device() call
  thermal/powerclamp: add id for braswell cpu
  thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock
  Thermal: fix platform_no_drv_owner.cocci warnings
  Thermal/int340x: avoid unnecessary pointer casting
  thermal: int3403: Delete a check before thermal_zone_device_unregister()
  thermal/int3400: export uuids
  thermal: of: Extend current of-thermal.c code to allow setting emulated temp
  thermal: of: Extend of-thermal to export table of trip points
  thermal: of: Rename struct __thermal_trip to struct thermal_trip
  thermal: of: Extend of-thermal.c to provide check if trip point is valid
  thermal: of: Extend of-thermal.c to provide number of trip points
  thermal: Fix error path in thermal_init()
  thermal: lock the thermal zone when switching governors
  thermal: core: ignore invalid trip temperature
  thermal: armada: Remove support for A375-Z1 SoC
  thermal: rockchip: add driver for thermal
  dt-bindings: document Rockchip thermal
  thermal: exynos: remove exynos_tmu_data.h include
  ...

Merge tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There are two new drivers, one for the BCM2835 (Raspberry Pi) and one
  used in conjunction with the LCD controller on various Atmel SoCs.
  The Samsung PWM driver can now be built for 64-bit ARM (Exynos7).

  A couple of fixes have been applied to the FTM PWM driver and system
  sleep support was added"

* tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling
  pwm: ftm: Add Power Management support for FTM PWM
  pwm: ftm: Add regmap rbtree type cache support
  pwm: ftm: Correctly track usage count
  pwm: samsung: Allow Samsung PWM driver to be enabled on Exynos7
  pwm: add DT bindings documentation for atmel-hlcdc-pwm driver
  pwm: add support for atmel-hlcdc-pwm device
  pwm: Add BCM2835 PWM driver

Pull input subsystem updates from Dmitry Torokhov:
 "Two new drivers for Elan hardware (for I2C touchpad and touchscreen
  found in several Chromebooks and other devices), a driver for Goodix
  touch panel, and small fixes to Cypress I2C trackpad and other input
  drivers.

  Also we switched to use __maybe_unused instead of gating suspend/
  resume code with #ifdef guards to get better compile coverage"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits)
  Input: gpio_keys - fix warning regarding uninitialized 'button' variable
  Input: add support for Elan eKTH I2C touchscreens
  Input: gpio_keys - fix warning regarding uninitialized  'irq' variable
  Input: cyapa - use 'error' for error codes
  Input: cyapa - fix resuming the device
  Input: gpio_keys - add device tree support for interrupt only keys
  Input: amikbd - allocate temporary keymap buffer on the stack
  Input: amikbd - fix build if !CONFIG_HW_CONSOLE
  Input: lm8323 - missing error check in lm8323_set_disable()
  Input: initialize device counter variables with -1
  Input: initialize input_no to -1 to avoid subtraction
  Input: i8042 - do not try to load on Intel NUC D54250WYK
  Input: atkbd - correct MSC_SCAN events for force_release keys
  Input: cyapa - switch to using managed resources
  Input: lifebook - use "static inline" instead of "inline" in lifebook.h
  Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume
  Input: mouse - use __maybe_unused instead of ifdef around suspend/resume
  Input: misc - use __maybe_unused instead of ifdef around suspend/resume
  Input: cap11xx - support for irq-active-high option
  Input: cap11xx - add support for various cap11xx devices
  ...

Pull MTD updates from Brian Norris:
 "Summary:
   - Add device tree support for DoC3

   - SPI NOR:
        Refactoring, for better layering between spi-nor.c and its
        driver users (e.g., m25p80.c)

        New flash device support

        Support 6-byte ID strings

   - NAND:
        New NAND driver for Allwinner SoC's (sunxi)

        GPMI NAND: add support for raw (no ECC) access, for testing
        purposes

        Add ATO manufacturer ID

        A few odd driver fixes

   - MTD tests:
        Allow testers to compensate for OOB bitflips in oobtest

        Fix a torturetest regression

   - nandsim: Support longer ID byte strings

  And more"

* tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits)
  mtd: tests: abort torturetest on erase errors
  mtd: physmap_of: fix potential NULL dereference
  mtd: spi-nor: allow NULL as chip name and try to auto detect it
  mtd: nand: gpmi: add raw oob access functions
  mtd: nand: gpmi: add proper raw access support
  mtd: nand: gpmi: add gpmi_copy_bits function
  mtd: spi-nor: factor out write_enable() for erase commands
  mtd: spi-nor: add support for s25fl128s
  mtd: spi-nor: remove the jedec_id/ext_id
  mtd: spi-nor: add id/id_len for flash_info{}
  mtd: nand: correct the comment of function nand_block_isreserved()
  jffs2: Drop bogus if in comment
  mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy
  mtd: cafe_nand: drop duplicate .write_page implementation
  mtd: m25p80: Add support for serial flash Spansion S25FL132K
  MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids
  mtd: spi-nor: improve wait-till-ready timeout loop
  mtd: delete unnecessary checks before two function calls
  mtd: nand: omap: Fix NAND enumeration on 3430 LDP
  mtd: nand: add ATO manufacturer info
  ...

Pull Microblaze fix from Michal Simek:
 "Fix mmap for cache coherent memory"

* tag 'microblaze-3.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix mmap for cache coherent memory

Pull security subsystem fixes from James Morris.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: remove a bogus NULL check
  ima: Fix build failure on powerpc when TCG_IBMVTPM dependencies are not met
  KEYS: Fix stale key registration at error path

Pull fuse update from Miklos Szeredi:
 "The first part makes sure we don't hold up umount with pending async
  requests.  In addition to being a cleanup, this is a small behavioral
  change (for the better) and unlikely to break anything.

  The second part prepares for a cleanup of the fuse device I/O code by
  adding a helper for simple request submission, with some savings in
  line numbers already realized"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: use file_inode() in fuse_file_fallocate()
  fuse: introduce fuse_simple_request() helper
  fuse: reduce max out args
  fuse: hold inode instead of path after release
  fuse: flush requests on umount
  fuse: don't wake up reserved req in fuse_conn_kill()

When running in non-cache coherent configuration the memory that was
allocated with dma_alloc_coherent() has a custom mapping and so there is no
1-to-1 relationship between the kernel virtual address and the PFN. This
means that virt_to_pfn() will not work correctly for those addresses and the
default mmap implementation in the form of dma_common_mmap() will map some
random, but not the requested, memory area.

Fix this by providing a custom mmap implementation that looks up the PFN
from the page table rather than using virt_to_pfn.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Pull vfs pile #2 from Al Viro:
 "Next pile (and there'll be one or two more).

  The large piece in this one is getting rid of /proc/*/ns/* weirdness;
  among other things, it allows to (finally) make nameidata completely
  opaque outside of fs/namei.c, making for easier further cleanups in
  there"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  coda_venus_readdir(): use file_inode()
  fs/namei.c: fold link_path_walk() call into path_init()
  path_init(): don't bother with LOOKUP_PARENT in argument
  fs/namei.c: new helper (path_cleanup())
  path_init(): store the "base" pointer to file in nameidata itself
  make default ->i_fop have ->open() fail with ENXIO
  make nameidata completely opaque outside of fs/namei.c
  kill proc_ns completely
  take the targets of /proc/*/ns/* symlinks to separate fs
  bury struct proc_ns in fs/proc
  copy address of proc_ns_ops into ns_common
  new helpers: ns_alloc_inum/ns_free_inum
  make proc_ns_operations work with struct ns_common * instead of void *
  switch the rest of proc_ns_operations to working with &...->ns
  netns: switch ->get()/->put()/->install()/->inum() to working with &net->ns
  make mntns ->get()/->put()/->install()/->inum() work with &mnt_ns->ns
  common object embedded into various struct ....ns

Pull isofs and reiserfs fixes from Jan Kara:
 "A reiserfs and an isofs fix.  They arrived after I sent you my first
  pull request and I don't want to delay them unnecessarily till rc2"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  isofs: Fix infinite looping over CE entries
  reiserfs: destroy allocated commit workqueue

Pull nfsd updates from Bruce Fields:
 "A comparatively quieter cycle for nfsd this time, but still with two
  larger changes:

   - RPC server scalability improvements from Jeff Layton (using RCU
     instead of a spinlock to find idle threads).

   - server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna
     Schumaker, enabling fallocate on new clients"

* 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits)
  nfsd4: fix xdr4 count of server in fs_location4
  nfsd4: fix xdr4 inclusion of escaped char
  sunrpc/cache: convert to use string_escape_str()
  sunrpc: only call test_bit once in svc_xprt_received
  fs: nfsd: Fix signedness bug in compare_blob
  sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt
  sunrpc: convert to lockless lookup of queued server threads
  sunrpc: fix potential races in pool_stats collection
  sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it
  sunrpc: require svc_create callers to pass in meaningful shutdown routine
  sunrpc: have svc_wake_up only deal with pool 0
  sunrpc: convert sp_task_pending flag to use atomic bitops
  sunrpc: move rq_cachetype field to better optimize space
  sunrpc: move rq_splice_ok flag into rq_flags
  sunrpc: move rq_dropme flag into rq_flags
  sunrpc: move rq_usedeferral flag to rq_flags
  sunrpc: move rq_local field to rq_flags
  sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it
  nfsd: minor off by one checks in __write_versions()
  sunrpc: release svc_pool_map reference when serv allocation fails
  ...

Pull ARM SoC/iommu configuration update from Arnd Bergmann:
 "The iomm-config branch contains work from Will Deacon, quoting his
  description:

    This series adds automatic IOMMU and DMA-mapping configuration for
    OF-based DMA masters described using the generic IOMMU devicetree
    bindings. Although there is plenty of future work around splitting up
    iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU
    group creation for the platform_bus, this is already useful enough for
    people to port over their IOMMU drivers and start using the new probing
    infrastructure (indeed, Marek has patches queued for the Exynos IOMMU).

  The branch touches core ARM and IOMMU driver files, and the respective
  maintainers (Russell King and Joerg Roedel) agreed to have the
  contents merged through the arm-soc tree.

  The final version was ready just before the merge window, so we ended
  up delaying it a bit longer than the rest, but we don't expect to see
  regressions because this is just additional infrastructure that will
  get used in drivers starting in 3.20 but is unused so far"

* tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  iommu: store DT-probed IOMMU data privately
  arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops
  arm: call iommu_init before of_platform_populate
  dma-mapping: detect and configure IOMMU in of_dma_configure
  iommu: fix initialization without 'add_device' callback
  iommu: provide helper function to configure an IOMMU for an of master
  iommu: add new iommu_ops callback for adding an OF device
  dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops
  iommu: provide early initialisation hook for IOMMU drivers

Pull ARM SoC DT updates part 2 from Arnd Bergmann:
 "This is a follow-up to the early ARM SoC DT changes, with additional
  content that has external dependencies:

   - The Tegra IOMMU DT support depends on changes from the iommu tree,
     plus the contents of the arm-soc drivers branch
   - The MVEBU PHY support depends on changes from the phy tree
   - The AT91 DT support depends on changes from the RTC and DMA-slave
     trees

  All of these changes just enable additional devices for existing
  platforms"

* tag 'dt2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: Enable IOMMU for display controllers on Tegra124
  ARM: tegra: Enable IOMMU for display controllers on Tegra114
  ARM: tegra: Enable IOMMU for display controllers on Tegra30
  ARM: tegra: Add memory controller support for Tegra124
  ARM: tegra: Add memory controller support for Tegra114
  ARM: tegra: Add memory controller support for Tegra30
  ARM: tegra: Add APB_MISC_GP as a MIPI pad control bank
  ARM: mvebu: add PHY support to the dts for the USB controllers on Armada 375
  ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375
  ARM: at91/dt: at91sam9g45: add ISI node
  ARM: at91/dt: enable the RTT block on the at91sam9m10g45ek board
  ARM: at91/dt: enable the RTT block on the sam9g20ek board
  ARM: at91/dt: add GPBR nodes
  ARM: at91/dt: add RTT nodes to at91 dtsis
  ARM: at91/dt: at91sam9rl: add rtc
  ARM: at91: fix GPLv2 wording
  ARM: at91/dt: sama5d4: add DMA support
  ARM: at91/dt: sama5d4: use macro instead of numeric value

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are the first arm-soc bug fixes.  Most of these are OMAP related
  fixes for regressions or minor bugs.  Aside from that, there are a few
  defconfig changes for various platforms"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  iommu/exynos: Fix arm64 allmodconfig build
  ARM: defconfigs: use CONFIG_CPUFREQ_DT
  ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver
  ARM: dts: am437x-sk-evm.dts: fix LCD timings
  ARM: dts: dra7-evm: Update SMPS7 (VDD_CORE) max voltage to match DM
  ARM: dts: dra7-evm: Fix typo in SMPS6 (VDD_GPU) max voltage
  ARM: OMAP2+: AM43x: Add ID for ES1.2
  ARM: dts: am437x-sk: fix lcd enable pin mux data
  ARM: dts: Fix gpmc regression for omap 2430sdp smc91x
  Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig"
  ARM: dts: dra7: fix DSS PLL clock mux registers
  ARM: dts: DRA7: wdt: Fix compatible property for watchdog node
  ARM: OMAP2+: clock: remove unused function prototype

Pull arm64 fixes from Will Deacon:
 "Given that my availability next week is likely to be poor, here are
  three arm64 fixes to resolve some issues introduced by features merged
  last week.  I was going to wait until -rc1, but it doesn't make much
  sense to sit on fixes.

  Fix some fallout introduced during the merge window:

   - Build failure when PM_SLEEP is disabled but CPU_IDLE is enabled
   - Compiler warning from page table dumper w/ 48-bit VAs
   - Erroneous page table truncation in reported dump"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: dump: don't skip final region
  arm64: mm: dump: fix shift warning
  arm64: psci: Fix build breakage without PM_SLEEP

Pull Xtensa fixes from Chris Zankel:
 - fix nommu support
 - remove s6000 variant and s6105 platform
 - fix permissions for kmapped pages so that copy_to_user_page works with them
 - add power management menu to Kconfig to allow use of runtime PM
 - disable linker optimizations because of a linker bug
 - fix sparse error

* tag 'xtensa-next-20141215' of git://github.com/czankel/xtensa-linux:
  xtensa: disable link optimization
  xtensa/uaccess: fix sparse errors
  xtensa: fix kmap_prot definition
  xtensa: add power management menu to Kconfig
  xtensa: remove s6000 variant and s6105 platform
  xtensa: make PLATFORM_DEFAULT_MEM parameters configurable
  xtensa: nommu: clean up memory map dump
  xtensa: nommu: reserve memory below PLATFORM_DEFAULT_MEM_START
  xtensa: nommu: set up cache and atomctl in initialize_mmu
  xtensa: move vecbase SR initialization to _startup
  xtensa: nommu: fix uImage load address
  xtensa: nommu: fix load address definitions
  xtensa: nommu: fix Image.elf reset code and ld script
  xtensa: nommu: add MMU dependency to DEBUG_TLB_SANITY
  xtensa: nommu: don't build most of the cache flushing code
  xtensa: nommu: don't provide arch_get_unmapped_area
  xtensa: nommu: provide MAP_UNINITIALIZED definition
  xtensa: nommu: provide _PAGE_CHG_MASK definition
  xtensa: nommu: provide __invalidate_dcache_page_alias stub
  xtensa: nommu: move init_mmu stub to nommu_context.h

Pull arch/tile updates from Chris Metcalf:
 "Note that one of the changes converts my old cmetcalf@tilera.com email
  in MAINTAINERS to the cmetcalf@ezchip.com email that you see on this
  email"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: update MAINTAINERS email to EZchip
  tile: avoid undefined behavior with regs[TREG_TP] etc
  arch: tile: kernel: kgdb.c: Use memcpy() instead of pointer copy one by one
  tile: Use the more common pr_warn instead of pr_warning
  arch: tile: gxio: Export symbols for module using in 'mpipe.c'
  arch: tile: kernel: signal.c: Use __copy_from/to_user() instead of __get/put_user()

Pull additional xen update from David Vrabel:
 "Xen: additional features for 3.19-rc0

   - Linear p2m for x86 PV guests which simplifies the p2m code,
     improves performance and will allow for > 512 GB PV guests in the
     future.

  A last-minute, configuration specific issue was discovered with this
  change which is why it was not included in my previous pull request.
  This is now been fixed and tested"

* tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: switch to post-init routines in xen mmu.c earlier
  Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
  xen: annotate xen_set_identity_and_remap_chunk() with __init
  xen: introduce helper functions to do safe read and write accesses
  xen: Speed up set_phys_to_machine() by using read-only mappings
  xen: switch to linear virtual mapped sparse p2m list
  xen: Hide get_phys_to_machine() to be able to tune common path
  x86: Introduce function to get pmd entry pointer
  xen: Delay invalidating extra memory
  xen: Delay m2p_override initialization
  xen: Delay remapping memory of pv-domain
  xen: use common page allocation function in p2m.c
  xen: Make functions static
  xen: fix some style issues in p2m.c

Merge tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "kselftest updates for 3.19-rc1:

   - kcmp test include file cleanup
   - kcmp change to build on all architectures
   - A light weight kselftest framework that provides a set of
     interfaces for tests to use to report results.  In addition,
     several tests are updated to use the framework.
   - A new runtime system size test that prints the amount of RAM that
     the currently running system is using"

* tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftest: size: Add size test for Linux kernel
  selftests/kcmp: Always try to build the test
  selftests/kcmp: Don't include kernel headers
  kcmp: Move kcmp.h into uapi
  selftests/timers: change test to use ksft framework
  selftests/kcmp: change test to use ksft framework
  selftests/ipc: change test to use ksft framework
  selftests/breakpoints: change test to use ksft framework
  selftests: add kselftest framework for uniform test reporting
  selftests/user: move test out of Makefile into a shell script
  selftests/net: move test out of Makefile into a shell script

Pull tracing updates from Steven Rostedt:
 "As the merge window is still open, and this code was not as complex as
  I thought it might be.  I'm pushing this in now.

  This will allow Thomas to debug his irq work for 3.20.

  This adds two new features:

  1) Allow traceopoints to be enabled right after mm_init().

     By passing in the trace_event= kernel command line parameter,
     tracepoints can be enabled at boot up.  For debugging things like
     the initialization of interrupts, it is needed to have tracepoints
     enabled very early.  People have asked about this before and this
     has been on my todo list.  As it can be helpful for Thomas to debug
     his upcoming 3.20 IRQ work, I'm pushing this now.  This way he can
     add tracepoints into the IRQ set up and have users enable them when
     things go wrong.

  2) Have the tracepoints printed via printk() (the console) when they
     are triggered.

     If the irq code locks up or reboots the box, having the tracepoint
     output go into the kernel ring buffer is useless for debugging.
     But being able to add the tp_printk kernel command line option
     along with the trace_event= option will have these tracepoints
     printed as they occur, and that can be really useful for debugging
     early lock up or reboot problems.

  This code is not that intrusive and it passed all my tests.  Thomas
  tried them out too and it works for his needs.

   Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org"

* tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Add tp_printk cmdline to have tracepoints go to printk()
  tracing: Move enabling tracepoints to just after rcu_init()

Merge tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Pull "Renesas ARM Based SoC Defconfig Fixes for v3.19" from Simon Horman:

* Revert change enabling RCAR_AUDMAC_PP in shmobile_defconfig

  Unfortunately enabling RCAR_AUDMAC_PP support this patch breaks dmaengine
  support on R-Car Gen2 boards. This should be resolved by driver updates
  in v3.20. But v3.19 was too early for this defconfig change.

* tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig"
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Exynos IOMMU driver uses the ARM specific dmac_flush_range() and
outer_flush_range() functions. This breaks the build on arm64 allmodconfig
in -next since support has been merged for some Exynos ARMv8 SoCs. Add a
dependency on ARM to keep things building until either the driver has the
ARM dependencies removed or the ARMv8 architecture code implements these
ARM specific APIs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The default linker behavior is to optimize identical literal values
and remove unnecessary overhead. However, because of a bug in the
linker, this currently results in an error ('call target out of range').

Disable link-time optimizations per default until there is a fix
for the linker and add the option to iss_defconfig.
Signed-off-by: Chris Zankel <chris@zankel.net>

We already checked if "desc" was NULL at the beginning of the function
and we've dereferenced it so this causes a static checker warning.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>

Prepare input updates for 3.19.

virtio wants to read bitwise types from userspace using get_user.  At the
moment this triggers sparse errors, since the value is passed through an
integer.

Fix that up using __force.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Chris Zankel <chris@zankel.net>

Xtensa improvements for 3.19:

- fix permissions for kmapped pages so that copy_to_user_page works with
  them;
- add power management menu to Kconfig to allow use of runtime PM.

Linux 3.18

Pull LED subsystem update from Bryan Wu:
 "We got some cleanup and driver for LP8860 as well as some patches for
  LED Flash Class"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds:
  leds: lp8860: Fix module dependency
  leds: lp8860: Introduce TI lp8860 4 channel LED driver
  leds: Add support for setting brightness in a synchronous way
  leds: implement sysfs interface locking mechanism
  leds: syscon: handle multiple syscon instances
  leds: delete copy/paste mistake
  leds: regulator: Convert to devm_regulator_get_exclusive

Pull staging driver updates from Greg KH:
 "Here's the big staging tree pull request for 3.19-rc1.

  We continued to delete more lines than were added, always a good
  thing, but not at a huge rate this release, only about 70k lines
  removed overall mostly from removing the horrid bcm driver.

  Lots of normal staging driver cleanups and fixes all over the place,
  well over a thousand of them, the shortlog shows all the horrid
  details.

  The "contentious" thing here is the movement of the Android binder
  code out of staging into the "real" part of the kernel.  This is code
  that has been stable for a few years now and is working as-is in the
  tens of millions of devices with no issues.  Yes, the code is horrid,
  and the userspace api leaves a lot to be desired, but it's not going
  to change due to legacy issues that we have no control over.  Because
  so many devices and companies rely on this, and the code is stable,
  might as well promote it out of staging.

  This was all discussed at the Linux Plumbers conference, and everyone
  participating agreed that this was the best way forward.

  There is work happening to replace the binder code with something new
  that is happening right now, but I don't expect to see the results of
  that work for another year at the earliest.  If that ever happens, and
  Android switches over to it, I'll gladly remove this version.

  As for maintainers, I'll be glad to maintain this code, I've been
  doing it for the past few years with no problems.  I'll send a
  MAINTAINERS entry for it before 3.19-final is out, still need to talk
  to the Google developers about if they are willing to help with it or
  not, last I checked they were, which was good.

  All of these patches have been in linux-next for a while with no
  reported issues"

* tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits)
  Staging: slicoss: Fix long line issues in slicoss.c
  staging: rtl8712: remove unnecessary else after return
  staging: comedi: change some printk calls to pr_err
  staging: rtl8723au: hal: Removed the extra semicolon
  lustre: Deletion of unnecessary checks before three function calls
  staging: lustre: fix sparse warnings: static function declaration
  staging: lustre: fixed sparse warnings related to static declarations
  staging: unisys: remove duplicate header
  staging: unisys: remove unneeded structure
  staging: ft1000 : replace __attribute ((__packed__) with __packed
  drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c"
  Drivers:staging:rtl8192e: Fixed checkpatch warning
  Drivers:staging:clocking-wizard: Added a newline
  staging: clocking-wizard: check for a valid clk_name pointer
  staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts
  staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily
  staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1()
  staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation
  staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB()
  staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation
  ...

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus

Pull firewire updates from Stefan Richter:
 "IEEE 1394 subsystem updates:
   - clean up firewire-ohci's longlived vm-mapping
   - use target instance lock instead of core lock in firewire-sbp2"

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: sbp2: replace card lock by target lock
  firewire: sbp2: replace some spin_lock_irqsave by spin_lock_irq
  firewire: sbp2: protect a reference counter properly
  firewire: core: document fw_csr_string's truncation of long strings
  firewire: ohci: replace vm_map_ram() with vmap()

Pull power supply updates from Sebastian Reichel::
 "Power supply and reset changes for the v3.19 series

   - update power/reset drivers to use kernel restart handler
   - add power off driver for i.mx6
   - add DT support for gpio-charger"

* tag 'for-v3.19' of git://git.infradead.org/battery-2.6:
  power: reset: adjust priority of simple syscon reboot driver
  power: ds2782_battery: Simplify the PM hooks
  power/reset: brcmstb: Register with kernel restart handler
  power/reset: hisi: Register with kernel restart handler
  power/reset: keystone: Register with kernel restart handler
  power/reset: axxia: Register with kernel restart handler
  power/reset: xgene: Register with kernel restart handler
  power/reset: xgene: Use mdelay instead of jiffies based timeout
  power/reset: xgene: Use local variable dev instead of pdev->dev
  power/reset: xgene: Drop devm_kfree
  power/reset: xgene: Return -ENOMEM if out of memory
  power/reset: vexpress: Register with kernel restart handler
  power: reset: imx-snvs-poweroff: add power off driver for i.mx6
  power: gpio-charger: add device tree support
  dt-bindings: document gpio-charger bindings

Pull HSI update from Sebastian Reichel:
 "Misc fixes in omap-ssi and nokia-modem drivers"

* tag 'hsi-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: nokia-modem: fix error handling of irq_of_parse_and_map
  HSI: nokia-modem: setup default value for pm parameter
  HSI: omap_ssi_port: Don't print uninitialized err
  HSI: remove deprecated IRQF_DISABLED

Pull irq domain ARM updates from Thomas Gleixner:
 "This set of changes make use of hierarchical irqdomains to provide:

   - MSI/ITS support for GICv3
   - MSI support for GICv2m
   - Interrupt polarity extender for GICv1

  Marc has come more cleanups for the existing extension hooks of GIC in
  the pipeline, but they are going to be 3.20 material"

* 'irq-irqdomain-arm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  irqchip: gicv3-its: Fix ITT allocation
  irqchip: gicv3-its: Move some alloc/free code to activate/deactivate
  irqchip: gicv3-its: Fix domain free in multi-MSI case
  irqchip: gic: Remove warning by including linux/irqdomain.h
  irqchip: gic-v2m: Add DT bindings for GICv2m
  irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell
  irqchip: mtk-sysirq: dt-bindings: Add bindings for mediatek sysirq
  irqchip: mtk-sysirq: Add sysirq interrupt polarity support
  irqchip: gic: Support hierarchy irq domain.
  irqchip: GICv3: Binding updates for ITS
  irqchip: GICv3: ITS: enable compilation of the ITS driver
  irqchip: GICv3: ITS: plug ITS init into main GICv3 code
  irqchip: GICv3: ITS: DT probing and initialization
  irqchip: GICv3: ITS: MSI support
  irqchip: GICv3: ITS: device allocation and configuration
  irqchip: GICv3: ITS: tables allocators
  irqchip: GICv3: ITS: LPI allocator
  irqchip: GICv3: ITS: irqchip implementation
  irqchip: GICv3: ITS command queue
  irqchip: GICv3: rework redistributor structure
  ...

Pull core block fix from Jens Axboe:
 "Jan reported a problem this morning with a crash in blk-mq, and after
  looking over the recent changes, it's obvious that the blk-mq-tag
  waitqueue handling change is buggy.  We could end up _not_ doing
  finish_wait() before switching to a new waitqueue, thus corrupting the
  wait task list"

* 'for-linus' of git://git.kernel.dk/linux-block:
  Revert "blk-mq: Micro-optimize bt_get()"

Pull rpmsg update from Ohad Ben-Cohen:
 "A single patch from Suman Anna which makes rpmsg use less buffers when
  small vrings are being used"

* tag 'rpmsg-3.19-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
  rpmsg: use less buffers when vrings are small