The mezzanine board carries an E key type M.2 slot. This is
connected to USB, SDIO and UART0. Enable sdio and uart0 for use
with wlan and/or bt M.2 cards.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/20200109154211.1530-1-m.reichl@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

An experimental test with the command below gives this error:
rk3308-evb.dt.yaml: dwmmc@ff480000: clock-names:2:
'ciu-drive' was expected

'ciu-drv' is not a valid dwmmc clock name,
so fix this by changing it to 'ciu-drive'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110161200.22755-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

An experimental test with the command below gives this error:
px30-evb.dt.yaml: dwmmc@ff390000: clock-names:2:
'ciu-drive' was expected

'ciu-drv' is not a valid dwmmc clock name,
so fix this by changing it to 'ciu-drive'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110161200.22755-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The rk3399-roc-pc uses a MP8859 DC/DC converter for 12V supply.
This supplies 5V only in default state after booting.
Now we can control the output voltage via I2C interface.
Add a node for the driver to reach 12V.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/20200106211633.2882-6-m.reichl@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The entries "supports-sd" and "supports-emmc" are not a valid Linux option
in relation with SD card or eMMC, so remove them.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191231175054.4929-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The option "num-slots" was deprecated long time ago, so remove it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191231191154.5587-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Describe LVDS IP. Add the CRTC and LVDS relevant endpoints so they can
be linked together.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20191224143900.23567-12-miquel.raynal@bootlin.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

This adds the dw-mipi-dsi controller and hooks it into the
display-subsystem on px30.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20200106112005.795834-1-heiko@sntech.de

Add the PHY which outputs MIPI DSI and LVDS.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20191224143900.23567-11-miquel.raynal@bootlin.com
[added dsi power-domain, following vendor-kernel]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Downstream RK3328 DTBs describe a CPU idle state matching that present
on other SoCs like RK3399. This works with upstream Trusted Firmware-A
too, so let's add it here.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/a8c83e705d387446ea8121516d410e38b2d9c57b.1577640736.git.robin.murphy@arm.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

There are two identical &uart0 nodes in this dts file,
so remove one of them.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20191228074757.2075-1-jbx6244@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.

VAMRC RK3399Pro SOM need to mount on top of radxa dalang
carrier board for making Rock Pi N10 SBC.

So, add initial support for Rock Pi N10 by including rk3399,
rk3399pro vamrc-som and raxda dalang carrier board dtsi files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20191216174711.17856-5-jagan@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Carrier board often referred as baseboard. For making
complete SBC or any other industrial boards, these
carrier boards will be used with associated SOMs.

Radxa has Dalang carrier board which supports on-board
peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI,
eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc.

Right now Dalang carrier board is used with two SBC-variants:
Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board
Rock Pi N8  => VMARC RK3288 SOM + Dalang carrier board(+codec)

So add this carrier board dtsi as a separate file in
ARM directory, so-that the same can reuse it in both
rk3288, rk3399pro variants of Rockchip SOMs.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20191216174711.17856-4-jagan@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

VMARC RK3399Pro SOM is a standard SMARC SOM design with
Rockchip RK3399Pro SoC, which is designed by Vamrs.

Specification:
- Rockchip RK3399Pro
- PMIC: RK809-3
- SD slot, 16GiB eMMC
- 2xUSB-2.0, 1xUSB3.0
- USB-C for power supply
- Ethernet, PCIe
- HDMI, MIPI-DSI/CSI, eDP

Add initial support for VMARC RK3399Pro SOM, this would use
with associated carrier board.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20191216174711.17856-3-jagan@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Rock Pi N10 is a Rockchip RK3399Pro based SBC, which has
- VMARC RK3399Pro SOM (as per SMARC standard) from Vamrs.
- Compatible carrier board from Radxa.

VMARC RK3399Pro SOM need to mount on top of dalang carrier
board for making Rock PI N10 SBC.

Add dt-bindings for it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20191216174711.17856-2-jagan@amarulasolutions.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

With enabled wifi support (required for firmware loading) for the
Ampak AP6359SA based wifi/bt combo module we now also can enable
the bluetooth part.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Soeren Moch <smoch@web.de>
Link: https://lore.kernel.org/r/20191218223523.30154-3-smoch@web.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

RockPro64 supports an Ampak AP6359SA based wifi/bt combo module.
The BCM4359/9 wifi controller in this module is connected to sdio0,
enable this interface.

Use the in-band sdio irq instead of the out-of-band wifi_host_wake_l
signal since the latter is not working reliably on this board (probably
due to it's PCIe WAKE# connection).
Signed-off-by: Soeren Moch <smoch@web.de>
Link: https://lore.kernel.org/r/20191218223523.30154-2-smoch@web.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

This patch splits rk3399-rockpro64 dts file to 2 files for v2 and
v2.1 boards.

Both v2 and v2.1 boards can use almost same settings but we find a
difference in I2C address of audio CODEC ES8136.
Reported-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20191202055929.26540-1-katsuhiro@katsuster.net
[put pine64,rockpro64-v2.* into an enum]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

The px30 has a Mali Bifrost gpu, so enable it on the evb board
and connect it with its supplying regulator.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20191208145508.3124-3-heiko@sntech.de

The px30 contains a Mali Bifrost gpu, so add the necessary core node
for it with interrupts and powerdomains.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20191208145508.3124-2-heiko@sntech.de

Define a compatible string for the Mali Bifrost GPU found in
Rockchip's PX30 SoCs.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20191208145508.3124-1-heiko@sntech.de

As for RK3288, now that we have a binding for the GPU we can
hook up the missing cooling device for the thermal zone.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/cb905e17526d846d6d35fb86fbd3c8ba4af4cdaf.1574974673.git.robin.murphy@arm.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add 0.9V and 1.8V voltage regulators for Radxa Rock Pi 4 board PCIe.
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Link: https://lore.kernel.org/r/20191120161302.5157-1-matwey@sai.msu.ruSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Some regulators don't need the always-on property, remove it.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/f985665c-86c0-1657-14f8-f77e2ce5a3f7@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

rk3399-roc-pc has 16 MB SPI NOR Flash, enable it.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/94f44e1d-86c6-1e32-aa63-56edbd7d75f5@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add SDR104 capability and regulators to SD card node.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/1b9b8314-8778-2d48-6f7a-3502c2146c42@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Fix typo according to schematics.
The original pin is needed to enable vcc3v0_sd in second patch of this series.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/cd5fd3a8-b0eb-9dc1-c473-9355762cdaa5@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

The min/max value of vdd_log is decide by pwm IO voltage and its
resistors, the rk3399-firefly board's pwm regulator circuit is designed
for IO voltage at 1.8V, while the board actually use 3.0V for IO, which
at last lead to the min-microvolt to '430mV' instead of '800mV'.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Link: https://lore.kernel.org/r/20191111005158.25070-1-kever.yang@rock-chips.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

On rk3399 vdd_log shall not exceed 1.0 V. On rk3399-roc-pc
vdd_log is presently 1118 mV. Fix by setting the min voltage
of the respective pwm-regulator down to 450 mV.
This results in a vdd_log of 953 mV.
Specify the supply to silence warning.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/d786ef47-eda8-3994-2ef2-fc4a584bcdcc@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Working with rootfs on two 128GB mmcs on rk3399-roc-pc.

One (mmc name 128G72, one screw hole) works fine in HS400 mode.
Other (mmc name DJNB4R, firefly on pcb, two screw holes) gets lots of
mmc1: "running CQE recovery", even hangs with damaged fs,
when running under heavy load, e.g. compiling kernel.
Both run fine with HS200.

Disabling CQ with patch mmc: core: Add MMC Command Queue Support kernel parameter [0] did not help.
[0] https://gitlab.com/ayufan-repos/rock64/linux-mainline-kernel/commit/54e264154b87dfe32a8359b2726e2d5611adbaf3

Therefore I propose to disable HS400 mode on roc-pc for now.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/367bf78a-f079-f0b4-68fe-52c86823c174@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Enable the tsadc thermal controller on px30-evb.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20191116095249.31193-2-heiko@sntech.de

Add tsadc and necessary connections to core px30 components.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20191116095249.31193-1-heiko@sntech.de

It looks like the px30 is running unstable at this 408MHz operating point.
This shows in stalled threads and other big numbers of kernel exception.

At 600MHz and above it instead works stable and as expected. As the 408MHz
point doesn't even decrease the voltage compared to 600MHz, just drop this
408MHz operating point for now.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Link: https://lore.kernel.org/r/20191116095220.31122-1-heiko@sntech.de

Expand the power tree description with the 0V9 and 1V8 supplies to the
RK3399 PCIe block. The NanoPis M4 and NEO4 just route 2 lanes to the
user expansion pins, so there's not much more to say at the board level
for them; NanoPC-T4 has a standard M.2 connector so we can at least
claim the 3.3V supply to that too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/a04a17f4b9b12e8698c76b34e7ca22f0c81845ce.1573908195.git.robin.murphy@arm.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Although it appeared to follow logically from the bindings, apparently
the thermal framework can't properly cope with a single cooling device
being shared between multiple maps. The CPU zone is probably easier to
overheat, so remove the references to the (optional) fan from the GPU
cooling zone to avoid things getting confused. Hopefully GPU-intensive
tasks will leak enough heat across to the CPU zone to still hit the
fan trips before reaching critical GPU temperatures.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/5bb39f3115df1a487d717d3ae87e523b03749379.1573908197.git.robin.murphy@arm.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Radxa Rock Pi 4 is equipped with M.2 PCIe slot,
so enable PCIe for the board.

The changes has been tested with Intel SSD 660p series device.

    01:00.0 Class 0108: Device 8086:f1a8 (rev 03)
Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Link: https://lore.kernel.org/r/20191117101545.6406-1-matwey@sai.msu.ruSigned-off-by: Heiko Stuebner <heiko@sntech.de>

As per Rock960 schematics add 0V9 and 1V8 voltage supplies to the
RK3399 PCIe block.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20191117140728.917-1-linux.amoon@gmail.comSigned-off-by: Heiko Stuebner <heiko@sntech.de>

HDMI-Sound is the only available sound card on rk3399-roc-pc, enable it.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/c9db5599-743b-bb90-999e-5989be6556ac@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>

Add regulators to pcie node from schematics.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Link: https://lore.kernel.org/r/8fa0c3da-b64d-f47f-a9eb-b3456a3fd073@fivetechno.deSigned-off-by: Heiko Stuebner <heiko@sntech.de>