- 24 Nov, 2005 38 commits
-
-
Dave Airlie authored
A fix for a locking bug which is triggered when a client tries to lock with flag DMA_QUIESCENT (typically the X server), but gets interrupted by a signal. The locking IOCTL should then return an error, but if DMA_QUIESCENT succeeds it returns 0, and the client falsely thinks it has the lock. In addition The client waits for DMA_QUISCENT and possibly DMA_READY without having the lock. From: Thomas Hellstrom Signed-off-by:Dave Airlie <airlied@linux.ie>
-
-
Nicolas Kaiser authored
remove redundant include Signed-off-by:
Nicolas Kaiser <nikai@nikai.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Randy Dunlap authored
Fix kernel-doc warning in linux/usb.h. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
David Hrdeman authored
On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote: >On Wed, 16 Nov 2005 23:52:32 +0100, David Hrdeman <david@2gen.com> wrote: >> usb-storage: waiting for device to settle before scanning >> Vendor: I0MEGA Model: UMni1GB*IOM2K4 Rev: 1.01 >> Type: Direct-Access ANSI SCSI revision: 02 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 00 00 00 >> sda: assuming drive cache: write through >> ioctl_internal_command: <8 0 0 0> return code = 8000002 >> : Current: sense key=0x0 >> ASC=0x0 ASCQ=0x0 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) > >I think it's harmless. I saw things like that, and initially I plugged >them with workarounds like this: Thanks for the pointer, and yes, it is harmless, but it floods the console with the messages which hides other (potentially important) messages...following your example I've made a patch which fixes the problem. Signed-off-by:
David Hrdeman <david@2gen.com> Signed-off-by:
-
David Brownell authored
This should fix a suspend/resume issues that appear with OHCI on some PPC hardware. The PCI layer should doesn't have the hooks needed for such ASIC-specific hooks (in this case, software clock gating), so this moves the code to do that into hcd-pci.c ... where it can be done after the relevant PCI PM state transition (to/from D3). Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Moving the PCI-specific parts of the EHCI driver into their own file created a few issues ... notably on resume paths which (like swsusp) require re-initializing the controller. This patch: - Splits the EHCI startup code into run-once HCD setup code and separate "init the hardware" reinit code. (That reinit code is a superset of the "early usb handoff" code.) - Then it makes the PCI init code run both, and the resume code only run the reinit code. - It also removes needless pci wrappers around EHCI start/stop methods. - Removes a byteswap issue that would be seen on big-endian hardware. The HCD glue still doesn't actually provide a good way to do all this run-one init stuff in one place though. Signed-off-by:
-
David Brownell authored
This cleans up the recent updates to EHCI PCI support: - Gets rid of checks for "is this a PCI device", they're no longer needed since this is now all PCI-only code. - Reduce log spamming: MWI is only interesting in the atypical case that it can actually be used. - Whitespace cleanup, as appropriate for a new file with no other pending patches. So other than that minor logging change, no functional updates. Signed-off-by: -
David Brownell authored
This fixes some bugs in EHCI suspend/resume that joined us over the past few releases (as usbcore, PCI, pmcore, and other components evolved): - Removes suspend and resume recursion from the EHCI driver, getting rid of the USB_SUSPEND special casing. - Updates the wakeup mechanism to work again; there's a newish usbcore call it needs to use. - Provide simpler tests for "do we need to restart from scratch", to address another case where PCI Vaux was lost. (In this case it was restoring a swsusp snapshot, but there could be others.) Un-exports a symbol that was temporarily exported. A notable change from previous version is that this doesn't move the spinlock init, so there's still a resume/reinit path bug. Signed-off-by: -
Ian Abbott authored
This patch adds two new devices to the ftdi_sio driver's device ID table. The device IDs were supplied by Stefan Nies of KOBIL Systems for two of their devices using the FTDI chip. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Damian Wrobel authored
This patch solves the following problem I've already discovered on the latest 2.6.15-rc1-git1 kernel: Nov 13 07:37:28 wrobel kernel: Bad page state at free_hot_cold_page (in process 'motion', page c164e020) Nov 13 07:37:28 wrobel kernel: flags:0x40000400 mapping:00000000 mapcount:0 count:0 Nov 13 07:37:28 wrobel kernel: Backtrace: Nov 13 07:37:28 wrobel kernel: [<c0146d86>] bad_page+0x85/0xbe Nov 13 07:37:28 wrobel kernel: [<c0147629>] free_hot_cold_page+0x54/0x129 Nov 13 07:37:28 wrobel kernel: [<c01598c6>] __vunmap+0xa9/0xfe Nov 13 07:37:28 wrobel kernel: [<c0154114>] vmalloc_to_page+0x34/0x55 Nov 13 07:37:28 wrobel kernel: [<c0159942>] vfree+0x27/0x35 Nov 13 07:37:28 wrobel kernel: [<f8a20292>] sn9c102_release_buffers+0x30/0x3f [sn9c102] Nov 13 07:37:28 wrobel kernel: [<f8a231c2>] sn9c102_release+0x37/0xeb [sn9c102] Nov 13 07:37:28 wrobel kernel: [<c0163e74>] __fput+0xa9/0x1aa Nov 13 07:37:28 wrobel kernel: [<c01624f7>] filp_close+0x49/0x6d Nov 13 07:37:30 wrobel kernel: [<c016258f>] sys_close+0x74/0x95 Nov 13 07:37:30 wrobel kernel: [<c0102ef9>] syscall_call+0x7/0xb Nov 13 07:37:31 wrobel kernel: Trying to fix it up, but a reboot is needed Signed-off-by:
Damian Wrobel <dwrobel@ertel.com.pl> Signed-off-by:
-
Daniel Marjamäki authored
The DBG() call where updated with the appropriate KERN_* symbol. Signed-off-by:
Daniel Marjamki <daniel.marjamaki@comhem.se> Signed-off-by:
-
Randy Dunlap authored
Fix kernel-doc warning in pci/pci-acpi.c. Signed-off-by:
-
Rajesh Shah authored
When attempting to hotadd a PCI card with a bridge on it, I saw the kernel reporting resource collision errors even when there were really no collisions. The problem is that the code doesn't skip over "invalid" resources with their resource type flag not set. Others have reported similar problems at boot time and for non-bridge PCI card hotplug too, where the code flags a resource collision for disabled ROMs. This patch fixes both problems. Signed-off-by:
Rajesh Shah <rajesh.shah@intel.com> Signed-off-by:
-
Rajesh Shah authored
Per the PCI Express spec, the power-fault-detected bit in the slot status register can be set anytime hardware detects a power fault, regardless of whether the slot has a device populated in it or not. This bit is sticky and must be explicitly cleared. This patch is needed to allow hot-add after such a power fault has been detected. Signed-off-by:
-
Daniel Marjamäkia authored
Modified common.c so it's using the appropriate KERN_* in printk() calls. Signed-off-by:
-
Eugeniy Meshcheryakov authored
Trivial patch to report both hdaps axises to the joystick device, not just the X axis. Signed-off-by:
Robert Love <rml@novell.com> Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
Fix a bug where setting the low fan speed limits will not work if no data was ever read through the sysfs interface and the fan clock dividers have not been explicitely set yet either. The reason is that data->fan_div[nr] may currently be used before it is initialized from the chip register values. The fix is to explicitely initialize data->fan_div[nr] before using it. Bug reported, and fix tested, by Nicolas Mailhot. Signed-off-by:
-
Jean Delvare authored
Fix the lm78 VID reading, which I accidentally broke while making this driver use the common vid_from_reg function rather than reimplementing its own in 2.6.14-rc1. I'm not proud of it, trust me. Signed-off-by:
-
Yuan Mu authored
Add SENSORS_LIMIT in store VCore limit functions. This fixes a potential u8 overflow on out-of-range user input. Signed-off-by:
-
Josh Boyer authored
Greg requested a patch to update MAINTAINERS with more SCM entries. The patch below is what I've found so far. Signed-off-by:
Josh Boyer <jwboyer@gmail.com> Signed-off-by:
-
Jody McIntyre authored
Pavel Machek points out that for git repos, what we include is not actually a URL. It is undesirable to use a URL since git repos can be accessed in many different ways. Signed-off-by:
Jody McIntyre <scjody@steamballoon.com> Signed-off-by:
-
Josh Boyer authored
Here's the MTD one. More later as I find them. Signed-off-by:
-
Alan Stern authored
This patch (as603) makes a few small fixes to the driver core: Change spin_lock_irq for a klist lock to spin_lock; Fix reference count leaks; Minor spelling and formatting changes. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by Patrick Mochel <mochel@digitalimplant.org> Signed-off-by:
-
Olaf Rempel authored
We must recompute bridge features everytime the list of underlying devices changes, or we might end up with features that are not supported by all devices (eg. NETIF_F_TSO) This patch adds the missing recompute when adding a device to the bridge. Signed-off-by:
Olaf Rempel <razzor@kopf-tisch.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Benoit Boissinot authored
net/ipv4/netfilter/ip_conntrack_netlink.c: In function 'ctnetlink_dump_table': net/ipv4/netfilter/ip_conntrack_netlink.c:409: warning: implicit declaration of function 'local_bh_disable' net/ipv4/netfilter/ip_conntrack_netlink.c:427: warning: implicit declaration of function 'local_bh_enable' Signed-off-by:
Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Oleg Drokin authored
Fix a 32 bit integer overflow in invalidate_inode_pages2_range. Signed-off-by:
-
Andrew Morton authored
Work around gcc-2.95.x macro expansion bug. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
David Gibson authored
Commit 7d24f0b8 fixed bugs in the ppc64 SLB miss handler with respect to hugepage handling, and in the process tweaked the semantics of the hugepage address masks in mm_context_t. Unfortunately, it left out a couple of necessary changes to go with that change. First, the in_hugepage_area() macro was not updated to match, second prepare_hugepage_range() was not updated to correctly handle hugepages regions which straddled the 4GB point. The latter appears only to cause process-hangs when attempting to map such a region, but the former can cause oopses if a get_user_pages() is triggered at the wrong point. This patch addresses both bugs. Signed-off-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Benjamin Herrenschmidt authored
If unregister_console() is inadvertently called while no consoles are registered, it will crash trying to dereference NULL pointer. It is necessary to fix that because register_console() provides no indication that it actually registered the console passed in. In fact, it may well decide not to register it based on various things... (akpm: It'd be better to make register_console() return something and fix the callers. All 106 of them...) Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Oleg Nesterov authored
When non-leader thread does exec, de_thread adds old leader to the init's ->children list in EXIT_ZOMBIE state and drops tasklist_lock. This means that release_task(leader) in de_thread() is racy vs do_wait() from init task. I think de_thread() should set old leader's state to EXIT_DEAD instead. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: george anzinger <george@mvista.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Linus Torvalds <torvalds@osdl.org> Signed-off-by:
-
Jim Keniston authored
Fix a bug in kprobes that can cause an Oops or even a crash when a return probe is installed on one of the following functions: sys_execve, do_execve, load_*_binary, flush_old_exec, or flush_thread. The fix is to remove the call to kprobe_flush_task() in flush_thread(). This fix has been tested on all architectures for which the return-probes feature has been implemented (i386, x86_64, ppc64, ia64). Please apply. BACKGROUND Up to now, we have called kprobe_flush_task() under two situations: when a task exits, and when it execs. Flushing kretprobe_instances on exit is correct because (a) do_exit() doesn't return, and (b) one or more return-probed functions may be active when a task calls do_exit(). Neither is the case for sys_execve() and its callees. Initially, the mistaken call to kprobe_flush_task() on exec was harmless because we put the "real" return address of each active probed function back in the stack, just to be safe, when we recycled its kretprobe_instance. When support for ppc64 and ia64 was added, this safety measure couldn't be employed, and was eventually dropped even for i386 and x86_64. sys_execve() and its callees were informally blacklisted for return probes until this fix was developed. Acked-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
Hugh Dickins authored
alpha, sparc64, x86_64 are each missing some primitives from their atomic64 support: fill in the gaps I've noticed by extrapolating asm, follow the groupings in each file. But powerpc and parisc still lack atomic64. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andi Kleen <ak@muc.de> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Hugh Dickins authored
Restore an earlier mod which went missing in the powerpc reshuffle: the 4xx mmu_mapin_ram does not need to take init_mm.page_table_lock. Signed-off-by:
-
Hugh Dickins authored
Update comments (only) on page_table_lock and mmap_sem in arch/powerpc. Removed the comment on page_table_lock from hash_huge_page: since it's no longer taking page_table_lock itself, it's irrelevant whether others are; but how it is safe (even against huge file truncation?) I can't say. Signed-off-by:
-
Hugh Dickins authored
The follow_page changes in get_futex_key have left it with two almost identical blocks, when handling the rare case of a futex in a nonlinear vma. get_user_pages will itself do that follow_page, and its additional find_extend_vma is hardly any overhead since the vma is already cached. Let's just delete the follow_page block and let get_user_pages do it. Signed-off-by:
-
Hugh Dickins authored
Closer attention to the arithmetic shows that neither ppc64 nor sparc really uses one page for multiple page tables: how on earth could they, while pte_alloc_one returns just a struct page pointer, with no offset? Well, arm26 manages it by returning a pte_t pointer cast to a struct page pointer, harumph, then compensating in its pmd_populate. But arm26 is never SMP, so it's not a problem for split ptlock either. And the PA-RISC situation has been recently improved: CONFIG_PA20 works without the 16-byte alignment which inflated its spinlock_t. But the current union of spinlock_t with private does make the 7xxx struct page significantly larger, even without debug, so disable its split ptlock. Signed-off-by:
-
Andrew Morton authored
This fix causes problems on the very first floppy access - we haven't yet talked to the FDC so we don't know which state the write-protect tab is in. Revert for now. Signed-off-by:
-
- 23 Nov, 2005 2 commits
-
-
Matthew Wilcox authored
Most of the functions already check. Do the ones that didn't. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Linus Torvalds authored
This reverts commit af2b4079 Changing the #define to an inline function breaks on non-SMP builds, since wuite a few places in the kernel do not implement the ipi handler when compiling for UP. Signed-off-by:
-
