- 12 Sep, 2016 8 commits
-
-
Pablo Neira authored
Instead of several goto's just to return the result, simply return it. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This is overly conservative and not flexible at all, so better let them go through and let the filtering policy decide what to do with them. We use skb_header_pointer() all over the place so we would just fail to match when trying to access fields from malformed traffic. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Consolidate pktinfo setup and validation by using the new generic functions so we converge to the netdev family codebase. We only need a linear IPv4 and IPv6 header from the reject expression, so move nft_bridge_iphdr_validate() and nft_bridge_ip6hdr_validate() to net/bridge/netfilter/nft_reject_bridge.c. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
These functions are extracted from the netdev family, they initialize the pktinfo structure and validate that the IPv4 and IPv6 headers are well-formed given that these functions are called from a path where layer 3 sanitization did not happen yet. These functions are placed in include/net/netfilter/nf_tables_ipv{4,6}.h so they can be reused by a follow up patch to use them from the bridge family too. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Make sure the pktinfo protocol fields are initialized if this fails to parse the transport header. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch introduces nft_set_pktinfo_unspec() that ensures proper initialization all of pktinfo fields for non-IP traffic. This is used by the bridge, netdev and arp families. This new function relies on nft_set_pktinfo_proto_unspec() to set a new tprot_set field that indicates if transport protocol information is available. Remain fields are zeroed. The meta expression has been also updated to check to tprot_set in first place given that zero is a valid tprot value. Even a handcrafted packet may come with the IPPROTO_RAW (255) protocol number so we can't rely on this value as tprot unset. Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
The dynset expression matches if we can fit a new entry into the set. If there is no room for it, then it breaks the rule evaluation. This patch introduces the inversion flag so you can add rules to explicitly drop packets that don't fit into the set. For example: # nft filter input flow table xyz size 4 { ip saddr timeout 120s counter } overflow drop This is useful to provide a replacement for connlimit. For the rule above, every new entry uses the IPv4 address as key in the set, this entry gets a timeout of 120 seconds that gets refresh on every packet seen. If we get new flow and our set already contains 4 entries already, then this packet is dropped. You can already express this in positive logic, assuming default policy to drop: # nft filter input flow table xyz size 4 { ip saddr timeout 10s counter } accept Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Laura Garcia Liebana authored
Add support to pass through an offset to the hash value. With this feature, the sysadmin is able to generate a hash with a given offset value. Example: meta mark set jhash ip saddr mod 2 seed 0xabcd offset 100 This option generates marks according to the source address from 100 to 101. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
-
- 09 Sep, 2016 2 commits
-
-
Liping Zhang authored
After commit adf05168 ("netfilter: remove ip_conntrack* sysctl compat code"), ctl_table_path member in struct nf_conntrack_l3proto{} is not used anymore, remove it. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Liping Zhang authored
Although the validation of queues_total and queuenum is checked in nft utility, but user can add nft rules via nfnetlink, so it is necessary to check the validation at the nft_queue expr init routine too. Tested by run ./nft-test.py any/queue.t: any/queue.t: 6 unit tests, 0 error, 0 warning Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 07 Sep, 2016 10 commits
-
-
Marco Angaroni authored
Current parsing methods for SIP headers do not allow the presence of tab characters between header name and header value. As a result Call-ID SIP headers like the following are discarded by IPVS SIP persistence engine: "Call-ID\t: mycallid@abcde" "Call-ID:\tmycallid@abcde" In above examples Call-IDs are represented as strings in C language. Obviously in real message we have byte "09" before/after colon (":"). Proposed fix is in nf_conntrack_sip module. Function sip_skip_whitespace() should skip tabs in addition to spaces, since in SIP grammar whitespace (WSP) corresponds to space or tab. Below is an extract of relevant SIP ABNF syntax. Call-ID = ( "Call-ID" / "i" ) HCOLON callid callid = word [ "@" word ] HCOLON = *( SP / HTAB ) ":" SWS SWS = [LWS] ; sep whitespace LWS = [*WSP CRLF] 1*WSP ; linear whitespace WSP = SP / HTAB word = 1*(alphanum / "-" / "." / "!" / "%" / "*" / "_" / "+" / "`" / "'" / "~" / "(" / ")" / "<" / ">" / ":" / "\" / DQUOTE / "/" / "[" / "]" / "?" / "{" / "}" ) Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This is patch renames the existing function to nft_overquota() and make it return a boolean that tells us if we have exceeded our byte quota. Just a cleanup. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Use xor to decide to break further rule evaluation or not, since the existing logic doesn't achieve the expected inversion. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Laura Garcia Liebana authored
The _until_ attribute is renamed to _modulus_ as the behaviour is similar to other expresions with number limits (ex. nft_hash). Renaming is possible because there isn't a kernel release yet with these changes. Signed-off-by: Laura Garcia Liebana <nevola@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
There are some debug code which are commented out in find_pattern by #if 0. Now remove them. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
The caller function "help" has already make sure the datalen could not be zero before invoke find_pattern as a parameter by the following codes if (dataoff >= skb->len) { pr_debug("ftp: dataoff(%u) >= skblen(%u)\n", dataoff, skb->len); return NF_ACCEPT; } datalen = skb->len - dataoff; And the latter codes "ends_in_nl = (fb_ptr[datalen - 1] == '\n');" use datalen directly without checking if it is zero. So it is unneccessary to check it in find_pattern too. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Marco Angaroni authored
Current parsing methods for SIP header Call-ID do not check correctly all characters allowed by RFC 3261. In particular "," character is allowed instead of "'" character. As a result Call-ID headers like the following are discarded by IPVS SIP persistence engine. Call-ID: -.!%*_+`'~()<>:\"/[]?{} Above example is composed using all non-alphanumeric characters listed in RFC 3261 for Call-ID header syntax. Proposed fix is in nf_conntrack_sip module; function iswordc() checks this range: (c >= '(' && c <= '/') which includes these characters: ()*+,-./ They are all allowed except ",". Instead "'" is not included in the list. Below is an extract of relevant SIP ABNF syntax. Call-ID = ( "Call-ID" / "i" ) HCOLON callid callid = word [ "@" word ] HCOLON = *( SP / HTAB ) ":" SWS SWS = [LWS] ; sep whitespace LWS = [*WSP CRLF] 1*WSP ; linear whitespace WSP = SP / HTAB word = 1*(alphanum / "-" / "." / "!" / "%" / "*" / "_" / "+" / "`" / "'" / "~" / "(" / ")" / "<" / ">" / ":" / "\" / DQUOTE / "/" / "[" / "]" / "?" / "{" / "}" ) Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Marco Angaroni authored
Current parsing methods for SIP headers do not properly manage continuation lines: in case of Call-ID header the first character of Call-ID header value is truncated. As a result IPVS SIP persistence engine hashes over a call-id that is not exactly the one present in the originale message. Example: "Call-ID: \r\n abcdeABCDE1234" results in extracted call-id equal to "bcdeABCDE1234". In above example Call-ID is represented as a string in C language. Obviously in real message the first bytes after colon (":") are "20 0d 0a 20". Proposed fix is in nf_conntrack_sip module. Since sip_follow_continuation() function walks past the leading spaces or tabs of the continuation line, sip_skip_whitespace() should simply return the ouput of sip_follow_continuation(). Otherwise another iteration of the for loop is done and dptr is incremented by one pointing to the second character of the first word in the header. Below is an extract of relevant SIP ABNF syntax. Call-ID = ( "Call-ID" / "i" ) HCOLON callid callid = word [ "@" word ] HCOLON = *( SP / HTAB ) ":" SWS SWS = [LWS] ; sep whitespace LWS = [*WSP CRLF] 1*WSP ; linear whitespace WSP = SP / HTAB word = 1*(alphanum / "-" / "." / "!" / "%" / "*" / "_" / "+" / "`" / "'" / "~" / "(" / ")" / "<" / ">" / ":" / "\" / DQUOTE / "/" / "[" / "]" / "?" / "{" / "}" ) Signed-off-by: Marco Angaroni <marcoangaroni@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
netfilter: gre: Use consistent GRE and PTTP header structure instead of the ones defined by netfilter There are two existing strutures which defines the GRE and PPTP header. So use these two structures instead of the ones defined by netfilter to keep consitent with other codes. Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Gao Feng authored
There are already some GRE_* macros in kernel, so it is unnecessary to define these macros. And remove some useless macros Signed-off-by: Gao Feng <fgao@ikuai8.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 06 Sep, 2016 20 commits
-
-
Arnd Bergmann authored
gpio_to_irq does not return NO_IRQ but instead returns a negative error code on failure. Returning NO_IRQ from the function has no negative effects as we only compare the result to the expected interrupt number, but it's better to return a proper failure code for consistency, and we should remove NO_IRQ from the kernel entirely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bert Kenward authored
Reported-by: Ma Yuying <yuma@redhat.com> Suggested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
The newly added bpf_overflow_handler function is only built of both CONFIG_EVENT_TRACING and CONFIG_BPF_SYSCALL are enabled, but the caller only checks the latter: kernel/events/core.c: In function 'perf_event_alloc': kernel/events/core.c:9106:27: error: 'bpf_overflow_handler' undeclared (first use in this function) This changes the caller so we also skip this call if CONFIG_EVENT_TRACING is disabled entirely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aa6a5f3c ("perf, bpf: add perf events core support for BPF_PROG_TYPE_PERF_EVENT programs") Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Baoyou Xie authored
We get 1 warning when building kernel with W=1: drivers/net/ethernet/arc/emac_mdio.c:107:5: warning: no previous prototype for 'arc_mdio_reset' [-Wmissing-prototypes] In fact, this function is only used in the file in which it is declared and don't need a declaration, but can be made static. so this patch marks this function with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Baoyou Xie authored
We get a few warnings when building kernel with W=1: drivers/net/usb/lan78xx.c:1182:6: warning: no previous prototype for 'lan78xx_defer_kevent' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:1409:5: warning: no previous prototype for 'lan78xx_nway_reset' [-Wmissing-prototypes] drivers/net/usb/lan78xx.c:2000:5: warning: no previous prototype for 'lan78xx_set_mac_addr' [-Wmissing-prototypes] .... In fact, these functions are only used in the file in which they are declared and don't need a declaration, but can be made static. so this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
-
Tomer Tayar authored
Adds support for several infrastructure operations that are done as part of debug data collection. Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
These messages are unnecessary as OOM allocation failures already do a dump_stack() giving more or less the same information. $ size drivers/net/ethernet/qlogic/qed/built-in.o* (defconfig x86-64) text data bss dec hex filename 127817 27969 32800 188586 2e0aa drivers/net/ethernet/qlogic/qed/built-in.o.new 132474 27969 32800 193243 2f2db drivers/net/ethernet/qlogic/qed/built-in.o.old Miscellanea: o Change allocs to the generally preferred forms where possible. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Split output code from sendmsg code Here's a set of small patches that split the packet transmission code from the sendmsg code and simply rearrange the new file to make it more logically laid out ready for being rewritten. An enum is also moved out of the header file to there as it's only used there. This needs to be applied on top of the just-posted fixes patch set. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160904-1' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Small fixes Here's a set of small fix patches: (1) Fix some uninitialised variables. (2) Set the client call state before making it live by attaching it to the conn struct. (3) Randomise the epoch and starting client conn ID values, and don't change the epoch when the client conn ID rolls round. (4) Replace deprecated create_singlethread_workqueue() calls. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haishuang Yan authored
If vxlan_build_skb return err < 0, tx_errors should be also increased. Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Brenden Blanco authored
Depending on the preempt mode, the bpf_prog stored in xdp_prog may be freed despite the use of call_rcu inside bpf_prog_put. The situation is possible when running in PREEMPT_RCU=y mode, for instance, since the rcu callback for destroying the bpf prog can run even during the bh handling in the mlx4 rx path. Several options were considered before this patch was settled on: Add a napi_synchronize loop in mlx4_xdp_set, which would occur after all of the rings are updated with the new program. This approach has the disadvantage that as the number of rings increases, the speed of update will slow down significantly due to napi_synchronize's msleep(1). Add a new rcu_head in bpf_prog_aux, to be used by a new bpf_prog_put_bh. The action of the bpf_prog_put_bh would be to then call bpf_prog_put later. Those drivers that consume a bpf prog in a bh context (like mlx4) would then use the bpf_prog_put_bh instead when the ring is up. This has the problem of complexity, in maintaining proper refcnts and rcu lists, and would likely be harder to review. In addition, this approach to freeing must be exclusive with other frees of the bpf prog, for instance a _bh prog must not be referenced from a prog array that is consumed by a non-_bh prog. The placement of rcu_read_lock in this patch is functionally the same as putting an rcu_read_lock in napi_poll. Actually doing so could be a potentially controversial change, but would bring the implementation in line with sk_busy_loop (though of course the nature of those two paths is substantially different), and would also avoid future copy/paste problems with future supporters of XDP. Still, this patch does not take that opinionated option. Testing was done with kernels in either PREEMPT_RCU=y or CONFIG_PREEMPT_VOLUNTARY=y+PREEMPT_RCU=n modes, with neither exhibiting any drawback. With PREEMPT_RCU=n, the extra call to rcu_read_lock did not show up in the perf report whatsoever, and with PREEMPT_RCU=y the overhead of rcu_read_lock (according to perf) was the same before/after. In the rx path, rcu_read_lock is eventually called for every packet from netif_receive_skb_internal, so the napi poll call's rcu_read_lock is easily amortized. v2: Remove extra rcu_read_lock in mlx4_en_process_rx_cq body Annotate xdp_prog with __rcu, and convert all usages to rcu_assign or rcu_dereference[_protected] as appropriate. Add explicit mutex lock around rcu_assign instead of xchg loop. Fixes: d576acf0 ("net/mlx4_en: add page recycle to prepare rx ring for tx support") Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sean Wang says: ==================== net: ethernet: mediatek: add enhancements to RX path Changes since v1: - fix message typos and add coverletter Changes since v2: - split from the previous series for submitting add enhancements as a series targeting 'net-next' and add indents before comments. Changes since v3: - merge the patch using PDMA RX path - fixed the input of mtk_poll_rx is with the remaining budget Changes since v4: - save one wmb and register update when no packet is being handled inside mtk_poll_rx call - fixed incorrect return packet count from mtk_napi_rx ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sean Wang authored
The patch adds support for aggregating more SKBs feed into NAPI in order to get more benefits from generic receive offload (GRO) by peeking at the RX ring status and moving more packets right before returning from NAPI RX polling handler if NAPI budgets are still available and some packets already present in hardware. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sean Wang authored
The patch makes move wmb() to outside the loop that could help RX path handling more faster although that RX descriptors aren't freed for DMA to use as soon as possible, but based on my experiment and the result shows it still can reach about 943Mbpis without performance drop that is tested based on the setup with one port using Giga PHY and 256 RX descriptors for DMA to move. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Joe Perches says: ==================== hso: neatening This seems to be the only code in the kernel that uses macro defines with a trailing underscore. Fix that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Use a more common logging style Miscellanea: o Add pr_fmt to prefix each output message o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
Macros that end in an underscore are just odd. Add hso_dbg(level, fmt, ...) and use it everwhere instead. Several uses had additional unnecessary newlines as the macro added a newline. Remove the newline from the macro and add newlines to each use as appropriate. Remove now unused D<digit> macros. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Woojung Huh authored
Add mdix control through ethtool. Signed-off-by: Woojung Huh <Woojung.huh@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-